From 046c6531b60e8b9eabf47820a06161338a612167 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Wed, 8 Aug 2012 09:07:41 +0800 Subject: PCI/PM: Add ABI document for sysfs file d3cold_allowed This patch adds ABI document for the following sysfs file: /sys/bus/pci/devices/.../d3cold_allowed Signed-off-by: Huang Ying Signed-off-by: Bjorn Helgaas Acked-by: Rafael J. Wysocki --- Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'Documentation') diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 34f51100f02..dff1f48d252 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit. -- cgit v1.2.3-70-g09d2