From ff0b3cd4a416bc727b0797b95b229b278d2a28f2 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 29 Nov 2011 16:24:16 +0100 Subject: watchdog: add nowayout helpers to Watchdog Timer Driver Kernel API Add two nowayout helpers for the Watchdog Timer Driver Kernel API. And apply this to the already converted drivers. Note: s3c2410_wdt lost the nowayout feature during the conversion. Reviewed-by: Wolfram Sang Acked-by: Mark Brown Signed-off-by: Wim Van Sebroeck --- Documentation/watchdog/watchdog-kernel-api.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt index 4f7c894244d..4b93c28e35c 100644 --- a/Documentation/watchdog/watchdog-kernel-api.txt +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -1,6 +1,6 @@ The Linux WatchDog Timer Driver Core kernel API. =============================================== -Last reviewed: 22-Jul-2011 +Last reviewed: 29-Nov-2011 Wim Van Sebroeck @@ -142,6 +142,14 @@ bit-operations. The status bits that are defined are: * WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. If this bit is set then the watchdog timer will not be able to stop. + To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog + timer device) you can either: + * set it statically in your watchdog_device struct with + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, + (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or + * use the following helper function: + static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout) + Note: The WatchDog Timer Driver Core supports the magic close feature and the nowayout feature. To use the magic close feature you must set the WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. -- cgit v1.2.3-70-g09d2