From 3c5994c83895c89d344f24a86276f00d308e142b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 17 Oct 2012 12:25:44 +0100 Subject: uapi: Allow automatic generation of uapi/asm/ header files Several arch/*/include/uapi/asm/* header simply include the corresponding file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas Signed-off-by: David Howells Cc: Michal Marek Cc: Arnd Bergmann --- Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 5be2ee8c90e..366d0ab0c5f 100644 --- a/Makefile +++ b/Makefile @@ -437,7 +437,9 @@ endif PHONY += asm-generic asm-generic: $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - obj=arch/$(SRCARCH)/include/generated/asm + src=asm obj=arch/$(SRCARCH)/include/generated/asm + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm # To make sure we do not include .config for any of the *config targets # catch them early, and hand them over to scripts/kconfig/Makefile -- cgit v1.2.3-70-g09d2 From e2a666d52b4825c26c857cada211f3baac26a600 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 19 Oct 2012 11:53:15 +1030 Subject: kbuild: sign the modules at install time Linus deleted the old code and put signing on the install command, I fixed it to extract the keyid and signer-name within sign-file and cleaned up that script now it always signs in-place. Some enthusiast should convert sign-key to perl and pull x509keyid into it. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- Makefile | 11 +++++++ scripts/Makefile.modinst | 2 +- scripts/Makefile.modpost | 77 +----------------------------------------------- scripts/sign-file | 44 +++++++++++---------------- scripts/x509keyid | 16 +++++----- 5 files changed, 39 insertions(+), 111 deletions(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 366d0ab0c5f..4fd82f7fc0b 100644 --- a/Makefile +++ b/Makefile @@ -719,6 +719,17 @@ endif # INSTALL_MOD_STRIP export mod_strip_cmd +ifeq ($(CONFIG_MODULE_SIG),y) +MODSECKEY = ./signing_key.priv +MODPUBKEY = ./signing_key.x509 +export MODPUBKEY +mod_sign_cmd = sh $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) $(srctree)/scripts/x509keyid +else +mod_sign_cmd = true +endif +export mod_sign_cmd + + ifeq ($(KBUILD_EXTMOD),) core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index 3d13d3a3edf..dda4b2b6192 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -17,7 +17,7 @@ __modinst: $(modules) @: quiet_cmd_modules_install = INSTALL $@ - cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) + cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@) # Modules built outside the kernel source tree go into extra by default INSTALL_MOD_DIR ?= extra diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 002089141df..a1cb0222ebe 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -14,8 +14,7 @@ # 3) create one .mod.c file pr. module # 4) create one Module.symvers file with CRC for all exported symbols # 5) compile all .mod.c files -# 6) final link of the module to a (or ) file -# 7) signs the modules to a file +# 6) final link of the module to a file # Step 3 is used to place certain information in the module's ELF # section, including information such as: @@ -33,8 +32,6 @@ # Step 4 is solely used to allow module versioning in external modules, # where the CRC of each module is retrieved from the Module.symvers file. -# Step 7 is dependent on CONFIG_MODULE_SIG being enabled. - # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined # symbols in the final module linking stage # KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. @@ -119,7 +116,6 @@ $(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE targets += $(modules:.ko=.mod.o) # Step 6), final link of the modules -ifneq ($(CONFIG_MODULE_SIG),y) quiet_cmd_ld_ko_o = LD [M] $@ cmd_ld_ko_o = $(LD) -r $(LDFLAGS) \ $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \ @@ -129,78 +125,7 @@ $(modules): %.ko :%.o %.mod.o FORCE $(call if_changed,ld_ko_o) targets += $(modules) -else -quiet_cmd_ld_ko_unsigned_o = LD [M] $@ - cmd_ld_ko_unsigned_o = \ - $(LD) -r $(LDFLAGS) \ - $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \ - -o $@ $(filter-out FORCE,$^) \ - $(if $(AFTER_LINK),; $(AFTER_LINK)) - -$(modules:.ko=.ko.unsigned): %.ko.unsigned :%.o %.mod.o FORCE - $(call if_changed,ld_ko_unsigned_o) - -targets += $(modules:.ko=.ko.unsigned) - -# Step 7), sign the modules -MODSECKEY = ./signing_key.priv -MODPUBKEY = ./signing_key.x509 - -ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY)) -ifeq ($(KBUILD_SRC),) - # no O= is being used - SCRIPTS_DIR := scripts -else - SCRIPTS_DIR := $(KBUILD_SRC)/scripts -endif -SIGN_MODULES := 1 -else -SIGN_MODULES := 0 -endif - -# only sign if it's an in-tree module -ifneq ($(KBUILD_EXTMOD),) -SIGN_MODULES := 0 -endif -# We strip the module as best we can - note that using both strip and eu-strip -# results in a smaller module than using either alone. -EU_STRIP = $(shell which eu-strip || echo true) - -quiet_cmd_sign_ko_stripped_ko_unsigned = STRIP [M] $@ - cmd_sign_ko_stripped_ko_unsigned = \ - cp $< $@ && \ - strip -x -g $@ && \ - $(EU_STRIP) $@ - -ifeq ($(SIGN_MODULES),1) - -quiet_cmd_genkeyid = GENKEYID $@ - cmd_genkeyid = \ - perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid - -%.signer %.keyid: % - $(call if_changed,genkeyid) - -KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid -quiet_cmd_sign_ko_ko_stripped = SIGN [M] $@ - cmd_sign_ko_ko_stripped = \ - sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) $< $@ -else -KEYRING_DEP := -quiet_cmd_sign_ko_ko_unsigned = NO SIGN [M] $@ - cmd_sign_ko_ko_unsigned = \ - cp $< $@ -endif - -$(modules): %.ko :%.ko.stripped $(KEYRING_DEP) FORCE - $(call if_changed,sign_ko_ko_stripped) - -$(patsubst %.ko,%.ko.stripped,$(modules)): %.ko.stripped :%.ko.unsigned FORCE - $(call if_changed,sign_ko_stripped_ko_unsigned) - -targets += $(modules) -endif # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- diff --git a/scripts/sign-file b/scripts/sign-file index e58e34e50ac..095a953bdb8 100644 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -1,8 +1,8 @@ -#!/bin/sh +#!/bin/bash # # Sign a module file using the given key. # -# Format: sign-file +# Format: sign-file # scripts=`dirname $0` @@ -15,8 +15,8 @@ fi key="$1" x509="$2" -src="$3" -dst="$4" +keyid_script="$3" +mod="$4" if [ ! -r "$key" ] then @@ -29,16 +29,6 @@ then echo "Can't read X.509 certificate" >&2 exit 2 fi -if [ ! -r "$x509.signer" ] -then - echo "Can't read Signer name" >&2 - exit 2; -fi -if [ ! -r "$x509.keyid" ] -then - echo "Can't read Key identifier" >&2 - exit 2; -fi # # Signature parameters @@ -83,33 +73,35 @@ fi ( perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $? -openssl dgst $dgst -binary $src || exit $? -) >$src.dig || exit $? +openssl dgst $dgst -binary $mod || exit $? +) >$mod.dig || exit $? # # Generate the binary signature, which will be just the integer that comprises # the signature with no metadata attached. # -openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $? -signerlen=`stat -c %s $x509.signer` -keyidlen=`stat -c %s $x509.keyid` -siglen=`stat -c %s $src.sig` +openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $? + +SIGNER="`perl $keyid_script $x509 signer-name`" +KEYID="`perl $keyid_script $x509 keyid`" +keyidlen=${#KEYID} +siglen=${#SIGNER} # # Build the signed binary # ( - cat $src || exit $? + cat $mod || exit $? echo '~Module signature appended~' || exit $? - cat $x509.signer $x509.keyid || exit $? + echo -n "$SIGNER" || exit $? + echo -n "$KEYID" || exit $? # Preface each signature integer with a 2-byte BE length perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $? - cat $src.sig || exit $? + cat $mod.sig || exit $? # Generate the information block perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $? -) >$dst~ || exit $? +) >$mod~ || exit $? -# Permit in-place signing -mv $dst~ $dst || exit $? +mv $mod~ $mod || exit $? diff --git a/scripts/x509keyid b/scripts/x509keyid index c8e91a4af38..4241ec6c64b 100755 --- a/scripts/x509keyid +++ b/scripts/x509keyid @@ -22,7 +22,7 @@ use strict; my $raw_data; -die "Need three filenames\n" if ($#ARGV != 2); +die "Need a filename [keyid|signer-name]\n" if ($#ARGV != 1); my $src = $ARGV[0]; @@ -259,10 +259,10 @@ die $src, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" my $id_key_id = asn1_retrieve($subject_key_id->[1]); -open(OUTFD, ">$ARGV[1]") || die $ARGV[1]; -print OUTFD $id_name; -close OUTFD || die $ARGV[1]; - -open(OUTFD, ">$ARGV[2]") || die $ARGV[2]; -print OUTFD $id_key_id; -close OUTFD || die $ARGV[2]; +if ($ARGV[1] eq "signer-name") { + print $id_name; +} elsif ($ARGV[1] eq "keyid") { + print $id_key_id; +} else { + die "Unknown arg"; +} -- cgit v1.2.3-70-g09d2 From b37d1bfb55d4b8a7d234fad0a84dca3336cee50b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Oct 2012 23:56:37 +0100 Subject: MODSIGN: perlify sign-file and merge in x509keyid Turn sign-file into perl and merge in x509keyid. The latter doesn't need to be a separate script as it doesn't actually need to work out the SHA1 sum of the X.509 certificate itself, since it can get that from the X.509 certificate. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- Makefile | 2 +- scripts/sign-file | 477 +++++++++++++++++++++++++++++++++++++++++++++--------- scripts/x509keyid | 268 ------------------------------ 3 files changed, 400 insertions(+), 347 deletions(-) mode change 100644 => 100755 scripts/sign-file delete mode 100755 scripts/x509keyid (limited to 'Makefile') diff --git a/Makefile b/Makefile index 4fd82f7fc0b..14b987431d9 100644 --- a/Makefile +++ b/Makefile @@ -723,7 +723,7 @@ ifeq ($(CONFIG_MODULE_SIG),y) MODSECKEY = ./signing_key.priv MODPUBKEY = ./signing_key.x509 export MODPUBKEY -mod_sign_cmd = sh $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) $(srctree)/scripts/x509keyid +mod_sign_cmd = perl $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) else mod_sign_cmd = true endif diff --git a/scripts/sign-file b/scripts/sign-file old mode 100644 new mode 100755 index d014abd11f1..d37d1309531 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -1,108 +1,429 @@ -#!/bin/bash +#!/usr/bin/perl -w # # Sign a module file using the given key. # -# Format: sign-file +# Format: # +# ./scripts/sign-file [-v] [] +# +# +use strict; +use FileHandle; +use IPC::Open2; + +my $verbose = 0; +if ($#ARGV >= 0 && $ARGV[0] eq "-v") { + $verbose = 1; + shift; +} + +die "Format: ./scripts/sign-file [-v] []\n" + if ($#ARGV != 2 && $#ARGV != 3); + +my $private_key = $ARGV[0]; +my $x509 = $ARGV[1]; +my $module = $ARGV[2]; +my $dest = ($#ARGV == 3) ? $ARGV[3] : $ARGV[2] . "~"; + +die "Can't read private key\n" unless (-r $private_key); +die "Can't read X.509 certificate\n" unless (-r $x509); +die "Can't read module\n" unless (-r $module); + +# +# Read the kernel configuration +# +my %config = ( + CONFIG_MODULE_SIG_SHA512 => 1 + ); + +if (-r ".config") { + open(FD, "<.config") || die ".config"; + while () { + if ($_ =~ /^(CONFIG_.*)=[ym]/) { + $config{$1} = 1; + } + } + close(FD); +} -scripts=`dirname $0` +# +# Function to read the contents of a file into a variable. +# +sub read_file($) +{ + my ($file) = @_; + my $contents; + my $len; + + open(FD, "<$file") || die $file; + binmode FD; + my @st = stat(FD); + die $file if (!@st); + $len = read(FD, $contents, $st[7]) || die $file; + close(FD) || die $file; + die "$file: Wanted length ", $st[7], ", got ", $len, "\n" + if ($len != $st[7]); + return $contents; +} + +############################################################################### +# +# First of all, we have to parse the X.509 certificate to find certain details +# about it. +# +# We read the DER-encoded X509 certificate and parse it to extract the Subject +# name and Subject Key Identifier. Theis provides the data we need to build +# the certificate identifier. +# +# The signer's name part of the identifier is fabricated from the commonName, +# the organizationName or the emailAddress components of the X.509 subject +# name. +# +# The subject key ID is used to select which of that signer's certificates +# we're intending to use to sign the module. +# +############################################################################### +my $x509_certificate = read_file($x509); -CONFIG_MODULE_SIG_SHA512=y -if [ -r .config ] -then - . ./.config -fi +my $UNIV = 0 << 6; +my $APPL = 1 << 6; +my $CONT = 2 << 6; +my $PRIV = 3 << 6; -key="$1" -x509="$2" -keyid_script="$3" -mod="$4" +my $CONS = 0x20; -if [ ! -r "$key" ] -then - echo "Can't read private key" >&2 - exit 2 -fi +my $BOOLEAN = 0x01; +my $INTEGER = 0x02; +my $BIT_STRING = 0x03; +my $OCTET_STRING = 0x04; +my $NULL = 0x05; +my $OBJ_ID = 0x06; +my $UTF8String = 0x0c; +my $SEQUENCE = 0x10; +my $SET = 0x11; +my $UTCTime = 0x17; +my $GeneralizedTime = 0x18; -if [ ! -r "$x509" ] -then - echo "Can't read X.509 certificate" >&2 - exit 2 -fi +my %OIDs = ( + pack("CCC", 85, 4, 3) => "commonName", + pack("CCC", 85, 4, 6) => "countryName", + pack("CCC", 85, 4, 10) => "organizationName", + pack("CCC", 85, 4, 11) => "organizationUnitName", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress", + pack("CCC", 85, 29, 35) => "authorityKeyIdentifier", + pack("CCC", 85, 29, 14) => "subjectKeyIdentifier", + pack("CCC", 85, 29, 19) => "basicConstraints" +); + +############################################################################### +# +# Extract an ASN.1 element from a string and return information about it. +# +############################################################################### +sub asn1_extract($$@) +{ + my ($cursor, $expected_tag, $optional) = @_; + + return [ -1 ] + if ($cursor->[1] == 0 && $optional); + + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n" + if ($cursor->[1] < 2); + + my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2)); + + if ($expected_tag != -1 && $tag != $expected_tag) { + return [ -1 ] + if ($optional); + die $x509, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag, + " not ", $expected_tag, ")\n"; + } + + $cursor->[0] += 2; + $cursor->[1] -= 2; + + die $x509, ": ", $cursor->[0], ": ASN.1 long tag\n" + if (($tag & 0x1f) == 0x1f); + die $x509, ": ", $cursor->[0], ": ASN.1 indefinite length\n" + if ($len == 0x80); + + if ($len > 0x80) { + my $l = $len - 0x80; + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n" + if ($cursor->[1] < $l); + + if ($l == 0x1) { + $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)); + } elsif ($l = 0x2) { + $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2)); + } elsif ($l = 0x3) { + $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16; + $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2)); + } elsif ($l = 0x4) { + $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4)); + } else { + die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n"; + } + + $cursor->[0] += $l; + $cursor->[1] -= $l; + } + + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n" + if ($cursor->[1] < $len); + + my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ]; + $cursor->[0] += $len; + $cursor->[1] -= $len; + + return $ret; +} + +############################################################################### +# +# Retrieve the data referred to by a cursor +# +############################################################################### +sub asn1_retrieve($) +{ + my ($cursor) = @_; + my ($offset, $len, $data) = @$cursor; + return substr($$data, $offset, $len); +} + +############################################################################### +# +# Roughly parse the X.509 certificate +# +############################################################################### +my $cursor = [ 0, length($x509_certificate), \$x509_certificate ]; + +my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE); +my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE); +my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1); +my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER); +my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1); +my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1); +my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1); + +my $subject_key_id = (); +my $authority_key_id = (); + +# +# Parse the extension list +# +if ($extension_list->[0] != -1) { + my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE); + + while ($extensions->[1]->[1] > 0) { + my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE); + my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID); + my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1); + my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING); + + my $raw_oid = asn1_retrieve($x_oid->[1]); + next if (!exists($OIDs{$raw_oid})); + my $x_type = $OIDs{$raw_oid}; + + my $raw_value = asn1_retrieve($x_val->[1]); + + if ($x_type eq "subjectKeyIdentifier") { + my $vcursor = [ 0, length($raw_value), \$raw_value ]; + + $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING); + } + } +} + +############################################################################### +# +# Determine what we're going to use as the signer's name. In order of +# preference, take one of: commonName, organizationName or emailAddress. +# +############################################################################### +my $org = ""; +my $cn = ""; +my $email = ""; + +while ($subject->[1]->[1] > 0) { + my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET); + my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE); + my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID); + my $n_val = asn1_extract($attr->[1], -1); + + my $raw_oid = asn1_retrieve($n_oid->[1]); + next if (!exists($OIDs{$raw_oid})); + my $n_type = $OIDs{$raw_oid}; + + my $raw_value = asn1_retrieve($n_val->[1]); + + if ($n_type eq "organizationName") { + $org = $raw_value; + } elsif ($n_type eq "commonName") { + $cn = $raw_value; + } elsif ($n_type eq "emailAddress") { + $email = $raw_value; + } +} + +my $signers_name = $email; + +if ($org && $cn) { + # Don't use the organizationName if the commonName repeats it + if (length($org) <= length($cn) && + substr($cn, 0, length($org)) eq $org) { + $signers_name = $cn; + goto got_id_name; + } + + # Or a signifcant chunk of it + if (length($org) >= 7 && + length($cn) >= 7 && + substr($cn, 0, 7) eq substr($org, 0, 7)) { + $signers_name = $cn; + goto got_id_name; + } + + $signers_name = $org . ": " . $cn; +} elsif ($org) { + $signers_name = $org; +} elsif ($cn) { + $signers_name = $cn; +} + +got_id_name: + +die $x509, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" + if (!$subject_key_id); + +my $key_identifier = asn1_retrieve($subject_key_id->[1]); + +############################################################################### +# +# Create and attach the module signature +# +############################################################################### # # Signature parameters # -algo=1 # Public-key crypto algorithm: RSA -hash= # Digest algorithm -id_type=1 # Identifier type: X.509 +my $algo = 1; # Public-key crypto algorithm: RSA +my $hash = 0; # Digest algorithm +my $id_type = 1; # Identifier type: X.509 # # Digest the data # -dgst= -if [ "$CONFIG_MODULE_SIG_SHA1" = "y" ] -then - prologue="0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2B, 0x0E, 0x03, 0x02, 0x1A, 0x05, 0x00, 0x04, 0x14" - dgst=-sha1 - hash=2 -elif [ "$CONFIG_MODULE_SIG_SHA224" = "y" ] -then - prologue="0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, 0x05, 0x00, 0x04, 0x1C" - dgst=-sha224 - hash=7 -elif [ "$CONFIG_MODULE_SIG_SHA256" = "y" ] -then - prologue="0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20" - dgst=-sha256 - hash=4 -elif [ "$CONFIG_MODULE_SIG_SHA384" = "y" ] -then - prologue="0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, 0x05, 0x00, 0x04, 0x30" - dgst=-sha384 - hash=5 -elif [ "$CONFIG_MODULE_SIG_SHA512" = "y" ] -then - prologue="0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, 0x05, 0x00, 0x04, 0x40" - dgst=-sha512 - hash=6 -else - echo "$0: Can't determine hash algorithm" >&2 - exit 2 -fi - -( -perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $? -openssl dgst $dgst -binary $mod || exit $? -) >$mod.dig || exit $? +my ($dgst, $prologue) = (); +if (exists $config{"CONFIG_MODULE_SIG_SHA1"}) { + $prologue = pack("C*", + 0x30, 0x21, 0x30, 0x09, 0x06, 0x05, + 0x2B, 0x0E, 0x03, 0x02, 0x1A, + 0x05, 0x00, 0x04, 0x14); + $dgst = "-sha1"; + $hash = 2; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA224"}) { + $prologue = pack("C*", + 0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, + 0x05, 0x00, 0x04, 0x1C); + $dgst = "-sha224"; + $hash = 7; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA256"}) { + $prologue = pack("C*", + 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, + 0x05, 0x00, 0x04, 0x20); + $dgst = "-sha256"; + $hash = 4; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA384"}) { + $prologue = pack("C*", + 0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, + 0x05, 0x00, 0x04, 0x30); + $dgst = "-sha384"; + $hash = 5; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA512"}) { + $prologue = pack("C*", + 0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, + 0x05, 0x00, 0x04, 0x40); + $dgst = "-sha512"; + $hash = 6; +} else { + die "Can't determine hash algorithm"; +} + +# +# Generate the digest and read from openssl's stdout +# +my $digest; +$digest = readpipe("openssl dgst $dgst -binary $module") || die "openssl dgst"; # # Generate the binary signature, which will be just the integer that comprises # the signature with no metadata attached. # -openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $? -siglen=`stat -c %s $mod.sig` +my $pid; +$pid = open2(*read_from, *write_to, + "openssl rsautl -sign -inkey $private_key -keyform PEM") || + die "openssl rsautl"; +binmode write_to; +print write_to $prologue . $digest || die "pipe to openssl rsautl"; +close(write_to) || die "pipe to openssl rsautl"; + +binmode read_from; +my $signature; +read(read_from, $signature, 4096) || die "pipe from openssl rsautl"; +close(read_from) || die "pipe from openssl rsautl"; +$signature = pack("n", length($signature)) . $signature, -SIGNER="`perl $keyid_script $x509 signer-name`" -KEYID="`perl $keyid_script $x509 keyid`" -keyidlen=$(echo -n "$KEYID" | wc -c) -signerlen=$(echo -n "$SIGNER" | wc -c) +waitpid($pid, 0) || die; +die "openssl rsautl died: $?" if ($? >> 8); # # Build the signed binary # -( - cat $mod || exit $? - echo '~Module signature appended~' || exit $? - echo -n "$SIGNER" || exit $? - echo -n "$KEYID" || exit $? +my $unsigned_module = read_file($module); + +my $magic_number = "~Module signature appended~\n"; + +my $info = pack("CCCCCxxxN", + $algo, $hash, $id_type, + length($signers_name), + length($key_identifier), + length($signature)); - # Preface each signature integer with a 2-byte BE length - perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $? - cat $mod.sig || exit $? +if ($verbose) { + print "Size of unsigned module: ", length($unsigned_module), "\n"; + print "Size of magic number : ", length($magic_number), "\n"; + print "Size of signer's name : ", length($signers_name), "\n"; + print "Size of key identifier : ", length($key_identifier), "\n"; + print "Size of signature : ", length($signature), "\n"; + print "Size of informaton : ", length($info), "\n"; + print "Signer's name : '", $signers_name, "'\n"; + print "Digest : $dgst\n"; +} - # Generate the information block - perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $? -) >$mod~ || exit $? +open(FD, ">$dest") || die $dest; +binmode FD; +print FD + $unsigned_module, + $magic_number, + $signers_name, + $key_identifier, + $signature, + $info + ; +close FD || die $dest; -mv $mod~ $mod || exit $? +if ($#ARGV != 3) { + rename($dest, $module) || die $module; +} diff --git a/scripts/x509keyid b/scripts/x509keyid deleted file mode 100755 index 4241ec6c64b..00000000000 --- a/scripts/x509keyid +++ /dev/null @@ -1,268 +0,0 @@ -#!/usr/bin/perl -w -# -# Generate an identifier from an X.509 certificate that can be placed in a -# module signature to indentify the key to use. -# -# Format: -# -# ./scripts/x509keyid -# -# We read the DER-encoded X509 certificate and parse it to extract the Subject -# name and Subject Key Identifier. The provide the data we need to build the -# certificate identifier. -# -# The signer's name part of the identifier is fabricated from the commonName, -# the organizationName or the emailAddress components of the X.509 subject -# name and written to the second named file. -# -# The subject key ID to select which of that signer's certificates we're -# intending to use to sign the module is written to the third named file. -# -use strict; - -my $raw_data; - -die "Need a filename [keyid|signer-name]\n" if ($#ARGV != 1); - -my $src = $ARGV[0]; - -open(FD, "<$src") || die $src; -binmode FD; -my @st = stat(FD); -die $src if (!@st); -read(FD, $raw_data, $st[7]) || die $src; -close(FD); - -my $UNIV = 0 << 6; -my $APPL = 1 << 6; -my $CONT = 2 << 6; -my $PRIV = 3 << 6; - -my $CONS = 0x20; - -my $BOOLEAN = 0x01; -my $INTEGER = 0x02; -my $BIT_STRING = 0x03; -my $OCTET_STRING = 0x04; -my $NULL = 0x05; -my $OBJ_ID = 0x06; -my $UTF8String = 0x0c; -my $SEQUENCE = 0x10; -my $SET = 0x11; -my $UTCTime = 0x17; -my $GeneralizedTime = 0x18; - -my %OIDs = ( - pack("CCC", 85, 4, 3) => "commonName", - pack("CCC", 85, 4, 6) => "countryName", - pack("CCC", 85, 4, 10) => "organizationName", - pack("CCC", 85, 4, 11) => "organizationUnitName", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress", - pack("CCC", 85, 29, 35) => "authorityKeyIdentifier", - pack("CCC", 85, 29, 14) => "subjectKeyIdentifier", - pack("CCC", 85, 29, 19) => "basicConstraints" -); - -############################################################################### -# -# Extract an ASN.1 element from a string and return information about it. -# -############################################################################### -sub asn1_extract($$@) -{ - my ($cursor, $expected_tag, $optional) = @_; - - return [ -1 ] - if ($cursor->[1] == 0 && $optional); - - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n" - if ($cursor->[1] < 2); - - my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2)); - - if ($expected_tag != -1 && $tag != $expected_tag) { - return [ -1 ] - if ($optional); - die $src, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag, - " not ", $expected_tag, ")\n"; - } - - $cursor->[0] += 2; - $cursor->[1] -= 2; - - die $src, ": ", $cursor->[0], ": ASN.1 long tag\n" - if (($tag & 0x1f) == 0x1f); - die $src, ": ", $cursor->[0], ": ASN.1 indefinite length\n" - if ($len == 0x80); - - if ($len > 0x80) { - my $l = $len - 0x80; - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n" - if ($cursor->[1] < $l); - - if ($l == 0x1) { - $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)); - } elsif ($l = 0x2) { - $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2)); - } elsif ($l = 0x3) { - $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16; - $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2)); - } elsif ($l = 0x4) { - $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4)); - } else { - die $src, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n"; - } - - $cursor->[0] += $l; - $cursor->[1] -= $l; - } - - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n" - if ($cursor->[1] < $len); - - my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ]; - $cursor->[0] += $len; - $cursor->[1] -= $len; - - return $ret; -} - -############################################################################### -# -# Retrieve the data referred to by a cursor -# -############################################################################### -sub asn1_retrieve($) -{ - my ($cursor) = @_; - my ($offset, $len, $data) = @$cursor; - return substr($$data, $offset, $len); -} - -############################################################################### -# -# Roughly parse the X.509 certificate -# -############################################################################### -my $cursor = [ 0, length($raw_data), \$raw_data ]; - -my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE); -my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE); -my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1); -my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER); -my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1); -my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1); -my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1); - -my $subject_key_id = (); -my $authority_key_id = (); - -# -# Parse the extension list -# -if ($extension_list->[0] != -1) { - my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE); - - while ($extensions->[1]->[1] > 0) { - my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE); - my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID); - my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1); - my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING); - - my $raw_oid = asn1_retrieve($x_oid->[1]); - next if (!exists($OIDs{$raw_oid})); - my $x_type = $OIDs{$raw_oid}; - - my $raw_value = asn1_retrieve($x_val->[1]); - - if ($x_type eq "subjectKeyIdentifier") { - my $vcursor = [ 0, length($raw_value), \$raw_value ]; - - $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING); - } - } -} - -############################################################################### -# -# Determine what we're going to use as the signer's name. In order of -# preference, take one of: commonName, organizationName or emailAddress. -# -############################################################################### -my $org = ""; -my $cn = ""; -my $email = ""; - -while ($subject->[1]->[1] > 0) { - my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET); - my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE); - my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID); - my $n_val = asn1_extract($attr->[1], -1); - - my $raw_oid = asn1_retrieve($n_oid->[1]); - next if (!exists($OIDs{$raw_oid})); - my $n_type = $OIDs{$raw_oid}; - - my $raw_value = asn1_retrieve($n_val->[1]); - - if ($n_type eq "organizationName") { - $org = $raw_value; - } elsif ($n_type eq "commonName") { - $cn = $raw_value; - } elsif ($n_type eq "emailAddress") { - $email = $raw_value; - } -} - -my $id_name = $email; - -if ($org && $cn) { - # Don't use the organizationName if the commonName repeats it - if (length($org) <= length($cn) && - substr($cn, 0, length($org)) eq $org) { - $id_name = $cn; - goto got_id_name; - } - - # Or a signifcant chunk of it - if (length($org) >= 7 && - length($cn) >= 7 && - substr($cn, 0, 7) eq substr($org, 0, 7)) { - $id_name = $cn; - goto got_id_name; - } - - $id_name = $org . ": " . $cn; -} elsif ($org) { - $id_name = $org; -} elsif ($cn) { - $id_name = $cn; -} - -got_id_name: - -############################################################################### -# -# Output the signer's name and the key identifier that we're going to include -# in module signatures. -# -############################################################################### -die $src, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" - if (!$subject_key_id); - -my $id_key_id = asn1_retrieve($subject_key_id->[1]); - -if ($ARGV[1] eq "signer-name") { - print $id_name; -} elsif ($ARGV[1] eq "keyid") { - print $id_key_id; -} else { - die "Unknown arg"; -} -- cgit v1.2.3-70-g09d2 From 6f0c0580b70c89094b3422ba81118c7b959c7556 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 20 Oct 2012 12:11:32 -0700 Subject: Linux 3.7-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Makefile') diff --git a/Makefile b/Makefile index 14b987431d9..14c93b39b92 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2