From 82a682676ce34e59369f60168a8729348aaae4d0 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 12 Apr 2013 16:29:08 +0200 Subject: ARM: dts: mvebu: Convert all the mvebu files to use the range property This conversion will allow to keep 32 bits addresses for the internal registers whereas the memory of the system will be 64 bits. Later it will also ease the move of the mvebu-mbus driver to the device tree support. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts') diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 9d04f04d4e3..e9bc8bf9026 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,11 +27,11 @@ }; soc { - serial@d0012000 { + serial@12000 { clock-frequency = <250000000>; status = "okay"; }; - serial@d0012100 { + serial@12100 { clock-frequency = <250000000>; status = "okay"; }; @@ -96,31 +96,31 @@ }; }; - ethernet@d0070000 { + ethernet@70000 { status = "okay"; phy = <&phy0>; phy-mode = "sgmii"; }; - ethernet@d0074000 { + ethernet@74000 { status = "okay"; phy = <&phy1>; phy-mode = "sgmii"; }; - ethernet@d0030000 { + ethernet@30000 { status = "okay"; phy = <&phy2>; phy-mode = "sgmii"; }; - ethernet@d0034000 { + ethernet@34000 { status = "okay"; phy = <&phy3>; phy-mode = "sgmii"; }; - i2c@d0011000 { + i2c@11000 { status = "okay"; clock-frequency = <400000>; }; - i2c@d0011100 { + i2c@11100 { status = "okay"; clock-frequency = <400000>; @@ -129,18 +129,18 @@ reg = <0x30>; }; }; - sata@d00a0000 { + sata@a0000 { nr-ports = <2>; status = "okay"; }; - usb@d0050000 { + usb@50000 { status = "okay"; }; - usb@d0051000 { + usb@51000 { status = "okay"; }; - devbus-bootcs@d0010400 { + devbus-bootcs@10400 { status = "okay"; ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ -- cgit v1.2.3-70-g09d2 From 467f54b2157bd01a487fd933122fd193f1e13911 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 12 Apr 2013 16:29:09 +0200 Subject: ARM: dts: mvebu: introduce internal-regs node Introduce a 'internal-regs' subnode, under which all devices are moved. This is not really needed for now, but will be for the mvebu-mbus driver. This generates a lot of code movement since it's indenting by one more tab all the devices. So it was a good opportunity to fix all the bad indentation. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-db.dts | 134 +++---- arch/arm/boot/dts/armada-370-mirabox.dts | 176 +++++----- arch/arm/boot/dts/armada-370-rd.dts | 96 ++--- arch/arm/boot/dts/armada-370-xp.dtsi | 301 ++++++++-------- arch/arm/boot/dts/armada-370.dtsi | 328 ++++++++--------- arch/arm/boot/dts/armada-xp-db.dts | 200 +++++------ arch/arm/boot/dts/armada-xp-gp.dts | 208 +++++------ arch/arm/boot/dts/armada-xp-mv78230.dtsi | 252 ++++++------- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 308 ++++++++-------- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 428 ++++++++++++----------- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 260 +++++++------- arch/arm/boot/dts/armada-xp.dtsi | 193 +++++----- 12 files changed, 1452 insertions(+), 1432 deletions(-) (limited to 'arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts') diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index e766f8bfc86..2353b1f1370 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -30,85 +30,87 @@ }; soc { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; }; - - phy1: ethernet-phy@1 { - reg = <1>; + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - /* - * This device is disabled by default, because - * using the SD card connector requires - * changing the default CON40 connector - * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a - * different connector - * "DB-88F6710_MPP_RGMII_SD_Jumper". - */ - status = "disabled"; - /* No CD or WP GPIOs */ - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; - usb@50000 { - status = "okay"; - }; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; - usb@51000 { - status = "okay"; - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + /* + * This device is disabled by default, because + * using the SD card connector requires + * changing the default CON40 connector + * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a + * different connector + * "DB-88F6710_MPP_RGMII_SD_Jumper". + */ + status = "disabled"; + /* No CD or WP GPIOs */ + }; - spi0: spi@10600 { - status = "okay"; + usb@50000 { + status = "okay"; + }; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; + usb@51000 { + status = "okay"; }; - }; - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + spi0: spi@10600 { status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; }; - pcie@2,0 { - /* Port 1, Lane 0 */ + + pcie-controller { status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 6530ae3ed66..14e36e19d51 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -25,113 +25,115 @@ }; soc { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; - }; - timer@20300 { - clock-frequency = <600000000>; - status = "okay"; - }; - - pinctrl { - pwr_led_pin: pwr-led-pin { - marvell,pins = "mpp63"; - marvell,function = "gpo"; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; }; - - stat_led_pins: stat-led-pins { - marvell,pins = "mpp64", "mpp65"; - marvell,function = "gpio"; + timer@20300 { + clock-frequency = <600000000>; + status = "okay"; }; - }; - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_led_pin &stat_led_pins>; + pinctrl { + pwr_led_pin: pwr-led-pin { + marvell,pins = "mpp63"; + marvell,function = "gpo"; + }; - green_pwr_led { - label = "mirabox:green:pwr"; - gpios = <&gpio1 31 1>; - linux,default-trigger = "heartbeat"; + stat_led_pins: stat-led-pins { + marvell,pins = "mpp64", "mpp65"; + marvell,function = "gpio"; + }; }; - blue_stat_led { - label = "mirabox:blue:stat"; - gpios = <&gpio2 0 1>; - linux,default-trigger = "cpu0"; + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_pin &stat_led_pins>; + + green_pwr_led { + label = "mirabox:green:pwr"; + gpios = <&gpio1 31 1>; + linux,default-trigger = "heartbeat"; + }; + + blue_stat_led { + label = "mirabox:blue:stat"; + gpios = <&gpio2 0 1>; + linux,default-trigger = "cpu0"; + }; + + green_stat_led { + label = "mirabox:green:stat"; + gpios = <&gpio2 1 1>; + default-state = "off"; + }; }; - green_stat_led { - label = "mirabox:green:stat"; - gpios = <&gpio2 1 1>; - default-state = "off"; - }; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + phy1: ethernet-phy@1 { + reg = <1>; + }; }; - - phy1: ethernet-phy@1 { - reg = <1>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins3>; - pinctrl-names = "default"; - status = "okay"; - /* - * No CD or WP GPIOs: SDIO interface used for - * Wifi/Bluetooth chip - */ - }; - - usb@50000 { - status = "okay"; - }; - usb@51000 { - status = "okay"; - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins3>; + pinctrl-names = "default"; + status = "okay"; + /* + * No CD or WP GPIOs: SDIO interface used for + * Wifi/Bluetooth chip + */ + }; - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - pca9505: pca9505@25 { - compatible = "nxp,pca9505"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x25>; + usb@50000 { + status = "okay"; }; - }; - pcie-controller { - status = "okay"; + usb@51000 { + status = "okay"; + }; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ + i2c@11000 { status = "okay"; + clock-frequency = <100000>; + pca9505: pca9505@25 { + compatible = "nxp,pca9505"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; }; - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ + pcie-controller { status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 83d5c041975..130f8390a7e 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -28,60 +28,62 @@ }; soc { - serial@12000 { - clock-frequency = <200000000>; - status = "okay"; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <200000000>; + status = "okay"; }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - phy1: ethernet-phy@1 { - reg = <1>; + phy1: ethernet-phy@1 { + reg = <1>; + }; }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins1>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins1>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + }; - usb@50000 { - status = "okay"; - }; + usb@50000 { + status = "okay"; + }; - usb@51000 { - status = "okay"; - }; - }; + usb@51000 { + status = "okay"; + }; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@1 { - label = "Software Button"; - linux,code = <116>; - gpios = <&gpio0 6 1>; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Software Button"; + linux,code = <116>; + gpios = <&gpio0 6 1>; + }; + }; }; }; -}; + }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index da40ce5711b..bf8f9111362 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -28,7 +28,6 @@ }; }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -36,192 +35,196 @@ interrupt-parent = <&mpic>; ranges = <0 0xd0000000 0x100000>; - mpic: interrupt-controller@20000 { + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpic: interrupt-controller@20000 { compatible = "marvell,mpic"; #interrupt-cells = <1>; #size-cells = <1>; interrupt-controller; - }; + }; - coherency-fabric@20200 { + coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, - <0x21810 0x1c>; - }; + reg = <0x20200 0xb0>, <0x21810 0x1c>; + }; - serial@12000 { + serial@12000 { compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; status = "disabled"; - }; - serial@12100 { + }; + serial@12100 { compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; status = "disabled"; - }; - - timer@20300 { - compatible = "marvell,armada-370-xp-timer"; - reg = <0x20300 0x30>, - <0x21040 0x30>; - interrupts = <37>, <38>, <39>, <40>, <5>, <6>; - clocks = <&coreclk 2>; - }; - - sata@a0000 { - compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; - status = "disabled"; - }; + }; + + timer@20300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0x20300 0x30>, <0x21040 0x30>; + interrupts = <37>, <38>, <39>, <40>, <5>, <6>; + clocks = <&coreclk 2>; + }; + + sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <55>; + clocks = <&gateclk 15>, <&gateclk 30>; + clock-names = "0", "1"; + status = "disabled"; + }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x72004 0x4>; - }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x4>; + }; - ethernet@70000 { + ethernet@70000 { compatible = "marvell,armada-370-neta"; reg = <0x70000 0x2500>; interrupts = <8>; clocks = <&gateclk 4>; status = "disabled"; - }; + }; - ethernet@74000 { + ethernet@74000 { compatible = "marvell,armada-370-neta"; reg = <0x74000 0x2500>; interrupts = <10>; clocks = <&gateclk 3>; status = "disabled"; - }; - - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <31>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <50>; - }; - - mvsdio@d4000 { - compatible = "marvell,orion-sdio"; - reg = <0xd4000 0x200>; - interrupts = <54>; - clocks = <&gateclk 17>; - status = "disabled"; - }; - - usb@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x500>; - interrupts = <45>; - status = "disabled"; - }; - - usb@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x500>; - interrupts = <46>; - status = "disabled"; - }; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <31>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <50>; + }; + + mvsdio@d4000 { + compatible = "marvell,orion-sdio"; + reg = <0xd4000 0x200>; + interrupts = <54>; + clocks = <&gateclk 17>; + status = "disabled"; + }; - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - reg = <0x10600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <45>; + status = "disabled"; + }; - spi1: spi@10680 { - compatible = "marvell,orion-spi"; - reg = <0x10680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + usb@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x500>; + interrupts = <46>; + status = "disabled"; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-bootcs@10400 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10400 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-bootcs@10400 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10400 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs0@10408 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10408 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs0@10408 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10408 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs1@10410 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10410 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs1@10410 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10410 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs2@10418 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10418 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; - }; + devbus-cs2@10418 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10418 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; - devbus-cs3@10420 { - compatible = "marvell,mvebu-devbus"; - reg = <0x10420 0x8>; - #address-cells = <1>; - #size-cells = <1>; - clocks = <&coreclk 0>; - status = "disabled"; + devbus-cs3@10420 { + compatible = "marvell,mvebu-devbus"; + reg = <0x10420 0x8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; }; -}; - + }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 5c4fa655fc3..6ef95dd218a 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -28,195 +28,195 @@ }; soc { - - mpic: interrupt-controller@20000 { - reg = <0x20a00 0x1d0>, - <0x21870 0x58>; - }; - - system-controller@18200 { + internal-regs { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; - }; - - L2: l2-cache { - compatible = "marvell,aurora-outer-cache"; - reg = <0xd0008000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; - - pinctrl { - compatible = "marvell,mv88f6710-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins1: sdio-pins1 { - marvell,pins = "mpp9", "mpp11", "mpp12", - "mpp13", "mpp14", "mpp15"; - marvell,function = "sd0"; }; - sdio_pins2: sdio-pins2 { - marvell,pins = "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52"; - marvell,function = "sd0"; + L2: l2-cache { + compatible = "marvell,aurora-outer-cache"; + reg = <0xd0008000 0x1000>; + cache-id-part = <0x100>; + wt-override; }; - sdio_pins3: sdio-pins3 { - marvell,pins = "mpp48", "mpp49", "mpp50", - "mpp51", "mpp52", "mpp53"; - marvell,function = "sd0"; + mpic: interrupt-controller@20000 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; }; - }; - - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; - gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; - reg = <0x18180 0x40>; - ngpios = <2>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; - - coreclk: mvebu-sar@18230 { - compatible = "marvell,armada-370-core-clock"; - reg = <0x18230 0x08>; - #clock-cells = <1>; - }; - - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-370-gating-clock"; - reg = <0x18220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; - - xor@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60A00 0x100>; - status = "okay"; - - xor00 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; - }; - xor01 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins1: sdio-pins1 { + marvell,pins = "mpp9", "mpp11", "mpp12", + "mpp13", "mpp14", "mpp15"; + marvell,function = "sd0"; + }; + + sdio_pins2: sdio-pins2 { + marvell,pins = "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52"; + marvell,function = "sd0"; + }; + + sdio_pins3: sdio-pins3 { + marvell,pins = "mpp48", "mpp49", "mpp50", + "mpp51", "mpp52", "mpp53"; + marvell,function = "sd0"; + }; }; - }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; - - xor10 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; - }; - xor11 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; }; - }; - - usb@50000 { - clocks = <&coreclk 0>; - }; - usb@51000 { - clocks = <&coreclk 0>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - thermal@18300 { - compatible = "marvell,armada370-thermal"; - reg = <0x18300 0x4 - 0x18304 0x4>; - status = "okay"; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - pcie-controller { - compatible = "marvell,armada-370-pcie"; - status = "disabled"; - device_type = "pci"; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-370-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - #address-cells = <3>; - #size-cells = <2>; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-370-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; - bus-range = <0x00 0xff>; + xor@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60A00 0x100>; + status = "okay"; + + xor00 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - reg = <0x40000 0x2000>, <0x80000 0x2000>; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor10 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; - reg-names = "pcie0.0", "pcie1.0"; + usb@50000 { + clocks = <&coreclk 0>; + }; - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + usb@51000 { + clocks = <&coreclk 0>; + }; - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; }; - pcie@2,0 { + pcie-controller { + compatible = "marvell,armada-370-pcie"; + status = "disabled"; device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; + + bus-range = <0x00 0xff>; + + reg = <0x40000 0x2000>, <0x80000 0x2000>; + + reg-names = "pcie0.0", "pcie1.0"; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index e37863f826b..6c8b032ddbb 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -30,128 +30,130 @@ }; soc { - serial@12000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12300 { - clock-frequency = <250000000>; - status = "okay"; - }; - - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; }; - - phy1: ethernet-phy@1 { - reg = <1>; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; }; - - phy2: ethernet-phy@2 { - reg = <25>; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; }; - - phy3: ethernet-phy@3 { - reg = <27>; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@30000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@34000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - }; - usb@50000 { - status = "okay"; - }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; - usb@51000 { - status = "okay"; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - usb@52000 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; - spi0: spi@10600 { - status = "okay"; + phy2: ethernet-phy@2 { + reg = <25>; + }; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; + phy3: ethernet-phy@3 { + reg = <27>; + }; }; - }; - pcie-controller { - status = "okay"; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; + }; - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + mvsdio@d4000 { + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; status = "okay"; + /* No CD or WP GPIOs */ }; - pcie@2,0 { - /* Port 0, Lane 1 */ + + usb@50000 { status = "okay"; }; - pcie@3,0 { - /* Port 0, Lane 2 */ + + usb@51000 { status = "okay"; }; - pcie@4,0 { - /* Port 0, Lane 3 */ + + usb@52000 { status = "okay"; }; - pcie@9,0 { - /* Port 2, Lane 0 */ + + spi0: spi@10600 { status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; }; - pcie@10,0 { - /* Port 3, Lane 0 */ + + pcie-controller { status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 55bcbff3946..d9972c9a927 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -37,126 +37,128 @@ }; soc { - serial@12000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12100 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12200 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12300 { - clock-frequency = <250000000>; - status = "okay"; - }; - - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <16>; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; }; - - phy1: ethernet-phy@1 { - reg = <17>; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; }; - - phy2: ethernet-phy@2 { - reg = <18>; + serial@12200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@12300 { + clock-frequency = <250000000>; + status = "okay"; }; - phy3: ethernet-phy@3 { - reg = <19>; + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - ethernet@30000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "rgmii-id"; - }; - ethernet@34000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "rgmii-id"; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; - spi0: spi@10600 { - status = "okay"; + phy1: ethernet-phy@1 { + reg = <17>; + }; - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; + phy2: ethernet-phy@2 { + reg = <18>; + }; - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 16 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x1000000>; - bank-width = <2>; + phy3: ethernet-phy@3 { + reg = <19>; + }; }; - }; - pcie-controller { - status = "okay"; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "rgmii-id"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "rgmii-id"; + }; - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ + spi0: spi@10600 { status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; }; - pcie@9,0 { - /* Port 2, Lane 0 */ + + devbus-bootcs@10400 { status = "okay"; + ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 16 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <2>; + }; }; - pcie@10,0 { - /* Port 3, Lane 0 */ + + pcie-controller { status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 12905abf4ca..f8eaa383e07 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -44,140 +44,142 @@ }; soc { - pinctrl { - compatible = "marvell,mv78230-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + internal-regs { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>; - }; - /* - * MV78230 has 2 PCIe units Gen2.0: One unit can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>; }; - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; + /* + * MV78230 has 2 PCIe units Gen2.0: One unit can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; status = "disabled"; - }; - - pcie@4,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; +#address-cells = <3>; +#size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 1faacd13d51..f4029f015af 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -45,177 +45,179 @@ }; soc { - pinctrl { - compatible = "marvell,mv78260-pinctrl"; - reg = <0x18000 0x38>; - - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + internal-regs { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0x18000 0x38>; + + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; - reg = <0x18180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - ethernet@34000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; - }; - - /* - * MV78260 has 3 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. One unit is - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; + /* + * MV78260 has 3 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. One unit is + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; status = "disabled"; - }; - - pcie@3,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; - - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; + bus-range = <0x00 0xff>; + + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index ce4f80a8285..6ab56bd35de 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -60,243 +60,245 @@ }; soc { - pinctrl { - compatible = "marvell,mv78460-pinctrl"; - reg = <0x18000 0x38>; + internal-regs { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0x18000 0x38>; - sdio_pins: sdio-pins { - marvell,pins = "mpp30", "mpp31", "mpp32", - "mpp33", "mpp34", "mpp35"; - marvell,function = "sd0"; + sdio_pins: sdio-pins { + marvell,pins = "mpp30", "mpp31", "mpp32", + "mpp33", "mpp34", "mpp35"; + marvell,function = "sd0"; + }; }; - }; - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; - reg = <0x18100 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; - }; + gpio0: gpio@18100 { + compatible = "marvell,orion-gpio"; + reg = <0x18100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; - reg = <0x18140 0x40>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; - }; + gpio1: gpio@18140 { + compatible = "marvell,orion-gpio"; + reg = <0x18140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; - gpio2: gpio@18180 { - compatible = "marvell,orion-gpio"; - reg = <0x18180 0x40>; - ngpios = <3>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupts-cells = <2>; - interrupts = <91>; - }; + gpio2: gpio@18180 { + compatible = "marvell,orion-gpio"; + reg = <0x18180 0x40>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; - ethernet@34000 { + ethernet@34000 { compatible = "marvell,armada-370-neta"; reg = <0x34000 0x2500>; interrupts = <14>; clocks = <&gateclk 1>; status = "disabled"; - }; + }; - /* - * MV78460 has 4 PCIe units Gen2.0: Two units can be - * configured as x4 or quad x1 lanes. Two units are - * x4/x1. - */ - pcie-controller { - compatible = "marvell,armada-xp-pcie"; - status = "disabled"; - device_type = "pci"; + /* + * MV78460 has 4 PCIe units Gen2.0: Two units can be + * configured as x4 or quad x1 lanes. Two units are + * x4/x1. + */ + pcie-controller { + compatible = "marvell,armada-xp-pcie"; + status = "disabled"; + device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; + #address-cells = <3>; + #size-cells = <2>; - bus-range = <0x00 0xff>; + bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ - 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ + ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ + 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 5>; - status = "disabled"; - }; + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 5>; + status = "disabled"; + }; - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 6>; - status = "disabled"; - }; + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 6>; + status = "disabled"; + }; - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 7>; - status = "disabled"; - }; + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 7>; + status = "disabled"; + }; - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 8>; - status = "disabled"; - }; + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 8>; + status = "disabled"; + }; - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 9>; - status = "disabled"; - }; + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 9>; + status = "disabled"; + }; - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - clocks = <&gateclk 10>; - status = "disabled"; - }; + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - clocks = <&gateclk 11>; - status = "disabled"; - }; + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - clocks = <&gateclk 12>; - status = "disabled"; - }; - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; - status = "disabled"; - }; + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 26>; + status = "disabled"; + }; - pcie@10,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; - status = "disabled"; + pcie@10,0 { + device_type = "pci"; + assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; + reg = <0x5000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 103>; + marvell,pcie-port = <3>; + marvell,pcie-lane = <0>; + clocks = <&gateclk 27>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index e9bc8bf9026..15a66a8bb23 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,154 +27,156 @@ }; soc { - serial@12000 { - clock-frequency = <250000000>; - status = "okay"; - }; - serial@12100 { - clock-frequency = <250000000>; - status = "okay"; - }; - pinctrl { - led_pins: led-pins-0 { - marvell,pins = "mpp49", "mpp51", "mpp53"; - marvell,function = "gpio"; + internal-regs { + serial@12000 { + clock-frequency = <250000000>; + status = "okay"; }; - }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins>; - - red_led { - label = "red_led"; - gpios = <&gpio1 17 1>; - default-state = "off"; + serial@12100 { + clock-frequency = <250000000>; + status = "okay"; }; - - yellow_led { - label = "yellow_led"; - gpios = <&gpio1 19 1>; - default-state = "off"; + pinctrl { + led_pins: led-pins-0 { + marvell,pins = "mpp49", "mpp51", "mpp53"; + marvell,function = "gpio"; + }; }; - - green_led { - label = "green_led"; - gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led { + label = "red_led"; + gpios = <&gpio1 17 1>; + default-state = "off"; + }; + + yellow_led { + label = "yellow_led"; + gpios = <&gpio1 19 1>; + default-state = "off"; + }; + + green_led { + label = "green_led"; + gpios = <&gpio1 21 1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; }; - }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; - button@1 { - label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 28 0>; + button@1 { + label = "Init Button"; + linux,code = <116>; + gpios = <&gpio1 28 0>; + }; }; - }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; - phy2: ethernet-phy@2 { - reg = <2>; - }; + phy2: ethernet-phy@2 { + reg = <2>; + }; - phy3: ethernet-phy@3 { - reg = <3>; + phy3: ethernet-phy@3 { + reg = <3>; + }; }; - }; - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "sgmii"; - }; - ethernet@30000 { - status = "okay"; - phy = <&phy2>; - phy-mode = "sgmii"; - }; - ethernet@34000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "sgmii"; - }; - i2c@11000 { - status = "okay"; - clock-frequency = <400000>; - }; - i2c@11100 { - status = "okay"; - clock-frequency = <400000>; + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; + }; + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; + }; + ethernet@30000 { + status = "okay"; + phy = <&phy2>; + phy-mode = "sgmii"; + }; + ethernet@34000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "sgmii"; + }; + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + }; + i2c@11100 { + status = "okay"; + clock-frequency = <400000>; - s35390a: s35390a@30 { - compatible = "s35390a"; - reg = <0x30>; + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + usb@50000 { + status = "okay"; + }; + usb@51000 { + status = "okay"; }; - }; - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - usb@50000 { - status = "okay"; - }; - usb@51000 { - status = "okay"; - }; - devbus-bootcs@10400 { - status = "okay"; - ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ - - /* Device Bus parameters are required */ - - /* Read parameters */ - devbus,bus-width = <8>; - devbus,turn-off-ps = <60000>; - devbus,badr-skew-ps = <0>; - devbus,acc-first-ps = <124000>; - devbus,acc-next-ps = <248000>; - devbus,rd-setup-ps = <0>; - devbus,rd-hold-ps = <0>; - - /* Write parameters */ - devbus,sync-enable = <0>; - devbus,wr-high-ps = <60000>; - devbus,wr-low-ps = <60000>; - devbus,ale-wr-ps = <60000>; - - /* NOR 128 MiB */ - nor@0 { - compatible = "cfi-flash"; - reg = <0 0x8000000>; - bank-width = <2>; + devbus-bootcs@10400 { + status = "okay"; + ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */ + + /* Device Bus parameters are required */ + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + /* NOR 128 MiB */ + nor@0 { + compatible = "cfi-flash"; + reg = <0 0x8000000>; + bank-width = <2>; + }; }; - }; - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ + pcie-controller { status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 465b9fa116e..bacab11c10d 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -22,141 +22,140 @@ model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; - soc { - L2: l2-cache { - compatible = "marvell,aurora-system-cache"; - reg = <0x08000 0x1000>; - cache-id-part = <0x100>; - wt-override; - }; + internal-regs { + L2: l2-cache { + compatible = "marvell,aurora-system-cache"; + reg = <0x08000 0x1000>; + cache-id-part = <0x100>; + wt-override; + }; - mpic: interrupt-controller@20000 { - reg = <0x20a00 0x2d0>, - <0x21070 0x58>; - }; + mpic: interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; + }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x430>, - <0x20800 0x20>; - }; + armada-370-xp-pmsu@22000 { + compatible = "marvell,armada-370-xp-pmsu"; + reg = <0x22100 0x430>, <0x20800 0x20>; + }; - serial@12200 { + serial@12200 { compatible = "snps,dw-apb-uart"; reg = <0x12200 0x100>; reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; status = "disabled"; - }; - serial@12300 { + }; + serial@12300 { compatible = "snps,dw-apb-uart"; reg = <0x12300 0x100>; reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; status = "disabled"; - }; + }; - timer@20300 { + timer@20300 { marvell,timer-25Mhz; - }; + }; - coreclk: mvebu-sar@18230 { - compatible = "marvell,armada-xp-core-clock"; - reg = <0x18230 0x08>; - #clock-cells = <1>; - }; + coreclk: mvebu-sar@18230 { + compatible = "marvell,armada-xp-core-clock"; + reg = <0x18230 0x08>; + #clock-cells = <1>; + }; - cpuclk: clock-complex@18700 { - #clock-cells = <1>; - compatible = "marvell,armada-xp-cpu-clock"; - reg = <0x18700 0xA0>; - clocks = <&coreclk 1>; - }; + cpuclk: clock-complex@18700 { + #clock-cells = <1>; + compatible = "marvell,armada-xp-cpu-clock"; + reg = <0x18700 0xA0>; + clocks = <&coreclk 1>; + }; - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-xp-gating-clock"; - reg = <0x18220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; - }; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-xp-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; + }; - system-controller@18200 { + system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x500>; - }; + }; - ethernet@30000 { + ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x2500>; interrupts = <12>; clocks = <&gateclk 2>; status = "disabled"; - }; - - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - clocks = <&gateclk 22>; - status = "okay"; - - xor10 { - interrupts = <51>; - dmacap,memcpy; - dmacap,xor; }; - xor11 { - interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; - }; - }; - xor@f0900 { - compatible = "marvell,orion-xor"; - reg = <0xF0900 0x100 - 0xF0B00 0x100>; - clocks = <&gateclk 28>; - status = "okay"; - - xor00 { - interrupts = <94>; - dmacap,memcpy; - dmacap,xor; + xor@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gateclk 22>; + status = "okay"; + + xor10 { + interrupts = <51>; + dmacap,memcpy; + dmacap,xor; + }; + xor11 { + interrupts = <52>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - xor01 { - interrupts = <95>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + xor@f0900 { + compatible = "marvell,orion-xor"; + reg = <0xF0900 0x100 + 0xF0B00 0x100>; + clocks = <&gateclk 28>; + status = "okay"; + + xor00 { + interrupts = <94>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <95>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; }; - }; - usb@50000 { - clocks = <&gateclk 18>; - }; + usb@50000 { + clocks = <&gateclk 18>; + }; - usb@51000 { - clocks = <&gateclk 19>; - }; + usb@51000 { + clocks = <&gateclk 19>; + }; - usb@52000 { - compatible = "marvell,orion-ehci"; - reg = <0x52000 0x500>; - interrupts = <47>; - clocks = <&gateclk 20>; - status = "disabled"; - }; + usb@52000 { + compatible = "marvell,orion-ehci"; + reg = <0x52000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; - thermal@182b0 { - compatible = "marvell,armadaxp-thermal"; - reg = <0x182b0 0x4 - 0x184d0 0x4>; - status = "okay"; + thermal@182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0x182b0 0x4 + 0x184d0 0x4>; + status = "okay"; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 74898364e717c6bd939bb88d95049fc91d2b4950 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 12 Apr 2013 16:29:10 +0200 Subject: ARM: dts: mvebu: Convert mvebu device tree files to 64 bits In order to be able to use more than 4GB of RAM when the LPAE is activated, the dts must be converted in 64 bits. Only Armada XP is LPAE capable, but as it shares a common dtsi file with Armada 370, then the common file include the skeleton64. Thanks to the use of the overload capability of the device tree format, armada-370 include the 32 bit skeleton and all the armada 370 based dts can remain the same. This was heavily based on the work of Lior Amsalem. Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/boot/dts/armada-370-xp.dtsi | 4 ++-- arch/arm/boot/dts/armada-370.dtsi | 2 ++ arch/arm/boot/dts/armada-xp-db.dts | 2 +- arch/arm/boot/dts/armada-xp-gp.dts | 14 ++++++++------ arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 2 +- 5 files changed, 14 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts') diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bf8f9111362..272bbc65fab 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -16,7 +16,7 @@ * 370 and Armada XP SoC. */ -/include/ "skeleton.dtsi" +/include/ "skeleton64.dtsi" / { model = "Marvell Armada 370 and XP SoC"; @@ -33,7 +33,7 @@ #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mpic>; - ranges = <0 0xd0000000 0x100000>; + ranges = <0 0 0xd0000000 0x100000>; internal-regs { compatible = "simple-bus"; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 6ef95dd218a..b2c1b5af974 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -16,6 +16,7 @@ */ /include/ "armada-370-xp.dtsi" +/include/ "skeleton.dtsi" / { model = "Marvell Armada 370 family SoC"; @@ -28,6 +29,7 @@ }; soc { + ranges = <0 0xd0000000 0x100000>; internal-regs { system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 6c8b032ddbb..d6cc8bf8272 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -26,7 +26,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2 GB */ + reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ }; soc { diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index d9972c9a927..26ad06fc147 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -26,14 +26,16 @@ memory { device_type = "memory"; - /* - * 4 GB of plug-in RAM modules by default but only 3GB - * are visible, the amount of memory available can be - * changed by the bootloader according the size of the - * module actually plugged + * 8 GB of plug-in RAM modules by default.The amount + * of memory available can be changed by the + * bootloader according the size of the module + * actually plugged. Only 7GB are usable because + * addresses from 0xC0000000 to 0xffffffff are used by + * the internal registers of the SoC. */ - reg = <0x00000000 0xC0000000>; + reg = <0x00000000 0x00000000 0x00000000 0xC0000000>, + <0x00000001 0x00000000 0x00000001 0x00000000>; }; soc { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 15a66a8bb23..f14d36c4615 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -23,7 +23,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0xC0000000>; /* 3 GB */ + reg = <0 0x00000000 0 0xC0000000>; /* 3 GB */ }; soc { -- cgit v1.2.3-70-g09d2