From e802b3a2bfd4f52a9b23037800fa0965aae92013 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Mon, 17 Nov 2014 14:35:46 +0100 Subject: ARM: dts: berlin: add BG2CD nodes for USB support Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role capable. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch/arm/boot/dts/berlin2cd.dtsi') diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 9e338ff80fd..230df3b1770 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -75,6 +75,22 @@ clocks = <&chip CLKID_TWD>; }; + usb_phy0: usb-phy@b74000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb74000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 23>; + status = "disabled"; + }; + + usb_phy1: usb-phy@b78000 { + compatible = "marvell,berlin2cd-usb-phy"; + reg = <0xb78000 0x128>; + #phy-cells = <0>; + resets = <&chip 0x178 24>; + status = "disabled"; + }; + eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; @@ -287,6 +303,26 @@ }; }; + usb0: usb@ed0000 { + compatible = "chipidea,usb2"; + reg = <0xed0000 0x200>; + interrupts = ; + clocks = <&chip CLKID_USB0>; + phys = <&usb_phy0>; + phy-names = "usb-phy"; + status = "disabled"; + }; + + usb1: usb@ee0000 { + compatible = "chipidea,usb2"; + reg = <0xee0000 0x200>; + interrupts = ; + clocks = <&chip CLKID_USB1>; + phys = <&usb_phy1>; + phy-names = "usb-phy"; + status = "disabled"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2