From 35346b229332b7a03399b256d28dfc9a951a4bc3 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Wed, 19 Feb 2014 15:15:48 +0800 Subject: ARM: dts: imx6qdl-sabreauto: Support debug LED The D9 LED controlled by gpio on the imx6qdl-sabreauto CPU board is a debug LED according to the board design. This patch adds the relevant device tree nodes to the imx6qdl-sabreauto device tree file to support this LED. Signed-off-by: Liu Ying Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm/boot/dts/imx6qdl-sabreauto.dtsi') diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 33e9bff9b07..009abd69385 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -10,11 +10,24 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + / { memory { reg = <0x10000000 0x80000000>; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + user { + label = "debug"; + gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif", "fsl,imx-sabreauto-spdif"; @@ -217,6 +230,12 @@ >; }; + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -- cgit v1.2.3-70-g09d2