From 7f69f8a4997ad12e062ddac8d6f996a50b26ebc2 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 17 Sep 2013 12:41:46 -0600 Subject: ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding kirkwood_setup_wins is the last manual caller of mbus in kirkwood, don't call it for DT boards and rely on the DT having a mbus node with a proper ranges property to setup these windows. Move all the mbus ranges properties for all boards into kirkwood.dtsi, since they are currently all the same. This makes the DT self consistent, since the physical address of the NAND and CRYPTO are both referenced internally. The arbitary Linux constants KIRKWOOD_NAND_MEM_PHYS_BASE and KIRKWOOD_SRAM_PHYS_BASE no longer have to match the DT values. Signed-off-by: Jason Gunthorpe Acked-by: Ezequiel Garcia Tested-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/boot/dts/kirkwood.dtsi') diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cf7aeaf89e9..d1bbe955b43 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -27,6 +27,11 @@ compatible = "marvell,kirkwood-mbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; + /* If a board file needs to change this ranges it must replace it completely */ + ranges = ; controller = <&mbusc>; pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ -- cgit v1.2.3-70-g09d2