From 2a5fdc9adde8476751b63a795e3d66ae2ee3979d Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Fri, 11 May 2012 17:32:56 -0600
Subject: ARM: dt: tegra: invert status=disable vs status=okay

In tegra*.dtsi, set status="disable" for all HW modules that the board
design may choose not to use. Update all boards to specifically enable
any of those modules that are useful by setting status="okay".

This makes board files say which features they do use, rather than which
they don't, which feels more logical. It also makes the .dts files
slightly smaller, at least for existing content.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
---
 arch/arm/boot/dts/tegra-paz00.dts | 44 ++++++++++++++++-----------------------
 1 file changed, 18 insertions(+), 26 deletions(-)

(limited to 'arch/arm/boot/dts/tegra-paz00.dts')

diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 6539e893480..cb366f0c6ff 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -226,31 +226,22 @@
 		};
 	};
 
-	i2s@70002a00 {
-		status = "disable";
+	i2s@70002800 {
+		status = "okay";
 	};
 
 	serial@70006000 {
+		status = "okay";
 		clock-frequency = <216000000>;
 	};
 
-	serial@70006040 {
-		status = "disable";
-	};
-
 	serial@70006200 {
+		status = "okay";
 		clock-frequency = <216000000>;
 	};
 
-	serial@70006300 {
-		status = "disable";
-	};
-
-	serial@70006400 {
-		status = "disable";
-	};
-
 	i2c@7000c000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		alc5632: alc5632@1e {
@@ -262,13 +253,10 @@
 	};
 
 	i2c@7000c400 {
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
-	i2c@7000c500 {
-		status = "disable";
-	};
-
 	nvec {
 		compatible = "nvidia,nvec";
 		reg = <0x7000c500 0x100>;
@@ -281,6 +269,7 @@
 	};
 
 	i2c@7000d000 {
+		status = "okay";
 		clock-frequency = <400000>;
 
 		adt7461@4c {
@@ -289,25 +278,28 @@
 		};
 	};
 
+	usb@c5000000 {
+		status = "okay";
+	};
+
 	usb@c5004000 {
+		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
 	};
 
+	usb@c5008000 {
+		status = "okay";
+	};
+
 	sdhci@c8000000 {
+		status = "okay";
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
 		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};
 
-	sdhci@c8000200 {
-		status = "disable";
-	};
-
-	sdhci@c8000400 {
-		status = "disable";
-	};
-
 	sdhci@c8000600 {
+		status = "okay";
 		support-8bit;
 	};
 
-- 
cgit v1.2.3-70-g09d2