From 69b90f1aadd68fb61d7ff182886f11761086c04a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 3 Jul 2013 12:51:36 +0200 Subject: ARM: at91/DT: at91sam9x5ek: fix USB host property to enable port C Device Tree "num-ports" property of USB host node has to be set to maximum number of ports available. The possibility to activate a particular port is done by specifying the proper gpio configuration for its vbus. This patch fixes the USB host node by configuring the 3 ports available on the product and letting "port A" available for USB gadget usage. Reported-by: Rodolfo Giometti Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Bo Shen --- arch/arm/boot/dts/at91sam9x5ek.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index b753855b205..49e3c45818c 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -94,8 +94,9 @@ usb0: ohci@00600000 { status = "okay"; - num-ports = <2>; - atmel,vbus-gpio = <&pioD 19 GPIO_ACTIVE_LOW + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */ + &pioD 19 GPIO_ACTIVE_LOW &pioD 20 GPIO_ACTIVE_LOW >; }; -- cgit v1.2.3-70-g09d2 From a57603ca2871ee0773b00839c1ea35c4a2d3eeb0 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 28 Jun 2013 10:39:15 +0200 Subject: ARM: at91/DT: fix at91sam9n12ek memory node Signed-off-by: Nicolas Ferre Cc: stable # 3.5+ --- arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index d59b70c6a6a..3d77dbe406f 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -14,11 +14,11 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; }; memory { - reg = <0x20000000 0x10000000>; + reg = <0x20000000 0x8000000>; }; clocks { -- cgit v1.2.3-70-g09d2 From 30ca2226bea6f0db519dc53381b893cd66cb5b66 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 20 Aug 2013 14:00:13 -0600 Subject: ARM: tegra: always enable USB VBUS regulators This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that USB VBUS doesn't get turned on, so USB devices are not detected. This affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to which the SSD is connected) and the external port(s) on Seaboard/ Springbank and Whistler. The Tegra DT as written in v3.11 allows two paths to enable USB VBUS: 1) Via the legacy DT binding for the USB controller; it can directly acquire a VBUS GPIO and activate it. 2) Via a regulator for VBUS, which is referenced by the new DT binding for the USB controller. Those two methods both use the same GPIO, and hence whichever of the USB controller and regulator gets probed first ends up owning the GPIO. In practice, the USB driver only supports path (1) above, since the patches to support the new USB binding are not present until v3.12:-( In practice, the regulator ends up being probed first and owning the GPIO. Since nothing enables the regulator (the USB driver code is not yet present), the regulator ends up being turned off. This originally caused no problem, because the polarity in the regulator definition was incorrect, so attempting to turn off the regulator actually turned it on, and everything worked:-( However, when testing the new USB driver code in v3.12, I noticed the incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT". In the context of v3.11, this patch then caused the USB VBUS to actually turn off, which broke USB ports with VBUS control. I got this patch included in v3.11-rc1 since it fixed a bug in device tree (incorrect polarity specification), and hence was suitable to be included early in the rc series. I evidently did not test the patch at all, or correctly, in the context of v3.11, and hence did not notice the issue that I have explained above:-( Fix this by making the USB VBUS regulators always enabled. This way, if the regulator owns the GPIO, it will always be turned on, even if there is no USB driver code to request the regulator be turned on. Even ignoring this bug, this is a reasonable way to configure the HW anyway. If this patch is applied to v3.11, it will cause a couple pretty trivial conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since the context right above the added lines changed in patches destined for v3.12. Reported-by: Kyle McMartin Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/tegra20-seaboard.dts | 2 ++ arch/arm/boot/dts/tegra20-trimslice.dts | 2 ++ arch/arm/boot/dts/tegra20-whistler.dts | 4 ++++ 3 files changed, 8 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 365760b33a2..40e6fb28033 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -830,6 +830,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 24 0>; /* PD0 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index ed4b901b022..37c93d3c481 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -412,6 +412,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio 170 0>; /* PV2 */ + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index ab67c94db28..a3d0ebad78a 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -588,6 +588,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + regulator-always-on; + regulator-boot-on; }; vbus3_reg: regulator@3 { @@ -598,6 +600,8 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + regulator-always-on; + regulator-boot-on; }; }; -- cgit v1.2.3-70-g09d2