From 4037242c4f5ff77afe61bf07ca1e8a99490219e5 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Tue, 13 Jul 2010 05:09:16 +0100 Subject: ARM: 6209/3: at91_udc: Add vbus polarity and polling mode Allow the vbus signal to optionally use polling. This is required if the vbus signal is connected to an non-interrupting io expander for example. If vbus is in polling mode, then it is assumed that the vbus gpio may sleep. Also add an option to have vbus be an active low signal. Both options are set in the platform data for the device. Signed-off-by: Ryan Mallon Acked-by: Nicolas Ferre Signed-off-by: Russell King --- arch/arm/mach-at91/include/mach/board.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/mach-at91') diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index df2ed848c9f..58528aa9c8a 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -44,6 +44,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ u8 pullup_pin; /* active == D+ pulled up */ u8 pullup_active_low; /* true == pullup_pin is active low */ }; -- cgit v1.2.3-70-g09d2