From 9d0412680e6c7b685ee466842047bcfb924d6dc5 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 5 Feb 2007 11:42:07 +0100 Subject: [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91rm9200/pm.c | 227 ------------------------------------------ 1 file changed, 227 deletions(-) delete mode 100644 arch/arm/mach-at91rm9200/pm.c (limited to 'arch/arm/mach-at91rm9200/pm.c') diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91rm9200/pm.c deleted file mode 100644 index 67aa5572a3e..00000000000 --- a/arch/arm/mach-at91rm9200/pm.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * arch/arm/mach-at91rm9200/pm.c - * AT91 Power Management - * - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "generic.h" - - -static int at91_pm_valid_state(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_ON: - case PM_SUSPEND_STANDBY: - case PM_SUSPEND_MEM: - return 1; - - default: - return 0; - } -} - - -static suspend_state_t target_state; - -/* - * Called after processes are frozen, but before we shutdown devices. - */ -static int at91_pm_prepare(suspend_state_t state) -{ - target_state = state; - return 0; -} - -/* - * Verify that all the clocks are correct before entering - * slow-clock mode. - */ -static int at91_pm_verify_clocks(void) -{ - unsigned long scsr; - int i; - - scsr = at91_sys_read(AT91_PMC_SCSR); - - /* USB must not be using PLLB */ - if (cpu_is_at91rm9200()) { - if ((scsr & (AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP)) != 0) { - pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n"); - return 0; - } - } else if (cpu_is_at91sam9260()) { -#warning "Check SAM9260 USB clocks" - } else if (cpu_is_at91sam9261()) { -#warning "Check SAM9261 USB clocks" - } - -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS - /* PCK0..PCK3 must be disabled, or configured to use clk32k */ - for (i = 0; i < 4; i++) { - u32 css; - - if ((scsr & (AT91_PMC_PCK0 << i)) == 0) - continue; - - css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS; - if (css != AT91_PMC_CSS_SLOW) { - pr_debug("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css); - return 0; - } - } -#endif - - return 1; -} - -/* - * Call this from platform driver suspend() to see how deeply to suspend. - * For example, some controllers (like OHCI) need one of the PLL clocks - * in order to act as a wakeup source, and those are not available when - * going into slow clock mode. - * - * REVISIT: generalize as clk_will_be_available(clk)? Other platforms have - * the very same problem (but not using at91 main_clk), and it'd be better - * to add one generic API rather than lots of platform-specific ones. - */ -int at91_suspend_entering_slow_clock(void) -{ - return (target_state == PM_SUSPEND_MEM); -} -EXPORT_SYMBOL(at91_suspend_entering_slow_clock); - - -static void (*slow_clock)(void); - - -static int at91_pm_enter(suspend_state_t state) -{ - at91_gpio_suspend(); - at91_irq_suspend(); - - pr_debug("AT91: PM - wake mask %08x, pm state %d\n", - /* remember all the always-wake irqs */ - (at91_sys_read(AT91_PMC_PCSR) - | (1 << AT91_ID_FIQ) - | (1 << AT91_ID_SYS) - | (at91_extern_irq)) - & at91_sys_read(AT91_AIC_IMR), - state); - - switch (state) { - /* - * Suspend-to-RAM is like STANDBY plus slow clock mode, so - * drivers must suspend more deeply: only the master clock - * controller may be using the main oscillator. - */ - case PM_SUSPEND_MEM: - /* - * Ensure that clocks are in a valid state. - */ - if (!at91_pm_verify_clocks()) - goto error; - - /* - * Enter slow clock mode by switching over to clk32k and - * turning off the main oscillator; reverse on wakeup. - */ - if (slow_clock) { - slow_clock(); - break; - } else { - /* DEVELOPMENT ONLY */ - pr_info("AT91: PM - no slow clock mode yet ...\n"); - /* FALLTHROUGH leaving master clock alone */ - } - - /* - * STANDBY mode has *all* drivers suspended; ignores irqs not - * marked as 'wakeup' event sources; and reduces DRAM power. - * But otherwise it's identical to PM_SUSPEND_ON: cpu idle, and - * nothing fancy done with main or cpu clocks. - */ - case PM_SUSPEND_STANDBY: - /* - * NOTE: the Wait-for-Interrupt instruction needs to be - * in icache so the SDRAM stays in self-refresh mode until - * the wakeup IRQ occurs. - */ - asm("b 1f; .align 5; 1:"); - asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */ - at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */ - /* fall though to next state */ - - case PM_SUSPEND_ON: - asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ - break; - - default: - pr_debug("AT91: PM - bogus suspend state %d\n", state); - goto error; - } - - pr_debug("AT91: PM - wakeup %08x\n", - at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); - -error: - target_state = PM_SUSPEND_ON; - at91_irq_resume(); - at91_gpio_resume(); - return 0; -} - - -static struct pm_ops at91_pm_ops ={ - .pm_disk_mode = 0, - .valid = at91_pm_valid_state, - .prepare = at91_pm_prepare, - .enter = at91_pm_enter, -}; - -static int __init at91_pm_init(void) -{ - printk("AT91: Power Management\n"); - -#ifdef CONFIG_AT91_PM_SLOW_CLOCK - /* REVISIT allocations of SRAM should be dynamically managed. - * FIQ handlers and other components will want SRAM/TCM too... - */ - slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K)); - memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz); -#endif - - /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */ - at91_sys_write(AT91_SDRAMC_LPR, 0); - - pm_set_ops(&at91_pm_ops); - - return 0; -} -arch_initcall(at91_pm_init); -- cgit v1.2.3-70-g09d2