From d109167b9c1002770d194644d5580a1f3588f7fc Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 10 Jun 2010 15:11:13 +0200 Subject: ARM: imx: rename mach dir for mx21 and mx27 to mach-imx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König --- arch/arm/mach-imx/mach-cpuimx27.c | 235 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 arch/arm/mach-imx/mach-cpuimx27.c (limited to 'arch/arm/mach-imx/mach-cpuimx27.c') diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c new file mode 100644 index 00000000000..1f616dcaabc --- /dev/null +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2009 Eric Benard - eric@eukrea.com + * + * Based on pcm038.c which is : + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static int eukrea_cpuimx27_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* UART4 */ + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* I2C1 */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* SDHC2 */ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + /* Quad UART's IRQ */ + GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN, + GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN, +#endif +}; + +static struct physmap_flash_data eukrea_cpuimx27_flash_data = { + .width = 2, +}; + +static struct resource eukrea_cpuimx27_flash_resource = { + .start = 0xc0000000, + .end = 0xc3ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device eukrea_cpuimx27_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &eukrea_cpuimx27_flash_data, + }, + .num_resources = 1, + .resource = &eukrea_cpuimx27_flash_resource, +}; + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct platform_device *platform_devices[] __initdata = { + &eukrea_cpuimx27_nor_mtd_device, + &mxc_fec_device, +}; + +static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8563", 0x51), + }, +}; + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +static struct plat_serial8250_port serial_platform_data[] = { + { + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), + .irq = IRQ_GPIOB(23), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), + .irq = IRQ_GPIOB(22), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), + .irq = IRQ_GPIOB(27), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), + .irq = IRQ_GPIOB(30), + .uartclk = 14745600, + .regshift = 1, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, + }, { + } +}; + +static struct platform_device serial_device = { + .name = "serial8250", + .id = 0, + .dev = { + .platform_data = serial_platform_data, + }, +}; +#endif + +static void __init eukrea_cpuimx27_init(void) +{ + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, + ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); + + mxc_register_device(&mxc_uart_device0, &uart_pdata[0]); + + mxc_register_device(&imx27_nand_device, + &eukrea_cpuimx27_nand_board_info); + + i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, + ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); + + mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + +#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) + /* SDHC2 can be used for Wifi */ + mxc_register_device(&mxc_sdhc_device1, NULL); + /* in which case UART4 is also used for Bluetooth */ + mxc_register_device(&mxc_uart_device3, &uart_pdata[1]); +#endif + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + platform_device_register(&serial_device); +#endif + +#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD + eukrea_mbimx27_baseboard_init(); +#endif +} + +static void __init eukrea_cpuimx27_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer eukrea_cpuimx27_timer = { + .init = eukrea_cpuimx27_timer_init, +}; + +MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = eukrea_cpuimx27_init, + .timer = &eukrea_cpuimx27_timer, +MACHINE_END -- cgit v1.2.3-70-g09d2