From ddd5f51bf661f49fb5f2be371ff1cf9cfe5fa98b Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 28 Sep 2011 17:16:05 +0800 Subject: arm/imx: change mxc_init_l2x0() to an imx31/35 specific call The mxc_init_l2x0() should really be an imx31/35 specific call. The patch removes early_initcall from mxc_init_l2x0() and get imx31 and imx35 soc specific function calls mxc_init_l2x0(), so that it's not necessarily to be called for all imx socs when we build single image for multiple imx socs. Thus the function can be renamed to imx3_init_l2x0() and put into mm-imx3.c. It also changes the return type from integer to void. From what I see, the integer was picked just to satisfy early_initcall prototype. With the patch 'ARM: l2x0: add empty l2x0_of_init' applied, the code compiles even without CONFIG_CACHE_L2X0 enabled. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mm-imx3.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm/mach-imx/mm-imx3.c') diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index e06eed12a7b..ffa33b4dedd 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -21,6 +21,7 @@ #include #include +#include #include #include @@ -29,6 +30,39 @@ #include #include +void imx3_init_l2x0(void) +{ + void __iomem *l2x0_base; + void __iomem *clkctl_base; + +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value. + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } + + l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); + if (IS_ERR(l2x0_base)) { + printk(KERN_ERR "remapping L2 cache area failed with %ld\n", + PTR_ERR(l2x0_base)); + return; + } + + l2x0_init(l2x0_base, 0x00030024, 0x00000000); +} + static struct map_desc mx31_io_desc[] __initdata = { imx_map_entry(MX31, X_MEMC, MT_DEVICE), imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED), @@ -102,6 +136,8 @@ void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; + imx3_init_l2x0(); + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); @@ -154,6 +190,8 @@ void __init imx35_soc_init(void) { int to_version = mx35_revision() >> 4; + imx3_init_l2x0(); + /* i.mx35 has the i.mx31 type gpio */ mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); -- cgit v1.2.3-70-g09d2