From e95dddb34c896f33e89f97365491e7932f89a0c0 Mon Sep 17 00:00:00 2001
From: Anson Huang <b20788@freescale.com>
Date: Wed, 20 Mar 2013 19:39:42 -0400
Subject: ARM: imx: enable anatop suspend/resume

Anatop module have sereval configurations for user
to reduce the power consumption in suspend, provide
suspend/resume interface for further use and enable
fet_odrive to reduce CORE LDO leakage during suspend.

As we have a common anatop file, remove all the operations
of anatop module in other files, use anatop interfaces to
do that.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/Kconfig      |  4 +++
 arch/arm/mach-imx/Makefile     |  1 +
 arch/arm/mach-imx/anatop.c     | 74 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/common.h     |  7 +++-
 arch/arm/mach-imx/mach-imx6q.c | 48 ++++-----------------------
 arch/arm/mach-imx/pm-imx6q.c   |  4 ++-
 6 files changed, 94 insertions(+), 44 deletions(-)
 create mode 100644 arch/arm/mach-imx/anatop.c

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 6575e4ebe26..f694074f230 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,6 +65,9 @@ config IRAM_ALLOC
 	bool
 	select GENERIC_ALLOCATOR
 
+config HAVE_IMX_ANATOP
+	bool
+
 config HAVE_IMX_GPC
 	bool
 
@@ -795,6 +798,7 @@ config SOC_IMX6Q
 	select CPU_V7
 	select HAVE_ARM_SCU
 	select HAVE_CAN_FLEXCAN if CAN
+	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 23555b0c08a..b16eb39b9f5 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -91,6 +91,7 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
+obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
new file mode 100644
index 00000000000..b396b92526d
--- /dev/null
+++ b/arch/arm/mach-imx/anatop.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define ANADIG_REG_CORE		0x140
+#define ANADIG_USB1_CHRG_DETECT	0x1b0
+#define ANADIG_USB2_CHRG_DETECT	0x210
+#define ANADIG_DIGPROG		0x260
+
+#define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
+#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
+#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
+
+static struct regmap *anatop;
+
+static void imx_anatop_enable_fet_odrive(bool enable)
+{
+	regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
+		BM_ANADIG_REG_CORE_FET_ODRIVE);
+}
+
+void imx_anatop_pre_suspend(void)
+{
+	imx_anatop_enable_fet_odrive(true);
+}
+
+void imx_anatop_post_resume(void)
+{
+	imx_anatop_enable_fet_odrive(false);
+}
+
+void imx_anatop_usb_chrg_detect_disable(void)
+{
+	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B
+		| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+	regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
+		BM_ANADIG_USB_CHRG_DETECT_EN_B |
+		BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
+}
+
+u32 imx_anatop_get_digprog(void)
+{
+	u32  val;
+
+	regmap_read(anatop, ANADIG_DIGPROG, &val);
+	return val;
+}
+
+void __init imx_anatop_init(void)
+{
+	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
+	if (IS_ERR(anatop)) {
+		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
+		return;
+	}
+}
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 9fea2522d7a..d557bf38328 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -128,6 +128,11 @@ extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
+extern void imx_anatop_init(void);
+extern void imx_anatop_pre_suspend(void);
+extern void imx_anatop_post_resume(void);
+extern void imx_anatop_usb_chrg_detect_disable(void);
+extern u32 imx_anatop_get_digprog(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_set_chicken_bit(void);
 
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9ffd103b27e..31aee4d5fcd 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -39,27 +39,12 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-#define IMX6Q_ANALOG_DIGPROG	0x260
-
 static int imx6q_revision(void)
 {
-	struct device_node *np;
-	void __iomem *base;
 	static u32 rev;
 
-	if (!rev) {
-		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
-		if (!np)
-			return IMX_CHIP_REVISION_UNKNOWN;
-		base = of_iomap(np, 0);
-		if (!base) {
-			of_node_put(np);
-			return IMX_CHIP_REVISION_UNKNOWN;
-		}
-		rev =  readl_relaxed(base + IMX6Q_ANALOG_DIGPROG);
-		iounmap(base);
-		of_node_put(np);
-	}
+	if (!rev)
+		rev = imx_anatop_get_digprog();
 
 	switch (rev & 0xff) {
 	case 0:
@@ -165,29 +150,7 @@ static void __init imx6q_1588_init(void)
 }
 static void __init imx6q_usb_init(void)
 {
-	struct regmap *anatop;
-
-#define HW_ANADIG_USB1_CHRG_DETECT		0x000001b0
-#define HW_ANADIG_USB2_CHRG_DETECT		0x00000210
-
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x00100000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x00080000
-
-	anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
-	if (!IS_ERR(anatop)) {
-		/*
-		 * The external charger detector needs to be disabled,
-		 * or the signal at DP will be poor
-		 */
-		regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT,
-				BM_ANADIG_USB_CHRG_DETECT_EN_B
-				| BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-		regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT,
-				BM_ANADIG_USB_CHRG_DETECT_EN_B |
-				BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-	} else {
-		pr_warn("failed to find fsl,imx6q-anatop regmap\n");
-	}
+	imx_anatop_usb_chrg_detect_disable();
 }
 
 static void __init imx6q_init_machine(void)
@@ -197,9 +160,11 @@ static void __init imx6q_init_machine(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
+	imx_anatop_init();
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
+	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 #define OCOTP_CFG3			0x440
@@ -293,7 +258,6 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	twd_local_timer_of_register();
-	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 static const char *imx6q_dt_compat[] __initdata = {
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index 5faba7a3c95..204942749e2 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -34,10 +34,12 @@ static int imx6q_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		imx6q_set_lpm(STOP_POWER_OFF);
 		imx_gpc_pre_suspend();
+		imx_anatop_pre_suspend();
 		imx_set_cpu_jump(0, v7_cpu_resume);
 		/* Zzz ... */
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
+		imx_anatop_post_resume();
 		imx_gpc_post_resume();
 		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
-- 
cgit v1.2.3-70-g09d2


From e7b82d645d8b0345508d4b7be85e10f961fbfa3e Mon Sep 17 00:00:00 2001
From: Anson Huang <b20788@freescale.com>
Date: Wed, 20 Mar 2013 19:39:43 -0400
Subject: ARM: imx: enable periphery well bias for suspend

Enable periphery charge pump for well biasing
at suspend to reduce periphery leakage.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx6q.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index d38e54f5b6d..262b7b6c79a 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -23,6 +23,9 @@
 #include "clk.h"
 #include "common.h"
 
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+
 #define CCGR0				0x68
 #define CCGR1				0x6c
 #define CCGR2				0x70
@@ -67,6 +70,29 @@ void imx6q_set_chicken_bit(void)
 	writel_relaxed(val, ccm_base + CGPR);
 }
 
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+	static bool last_wb_mode;
+
+	if (last_wb_mode == enable)
+		return;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	last_wb_mode = enable;
+}
+
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
 	u32 val = readl_relaxed(ccm_base + CLPCR);
@@ -74,6 +100,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	val &= ~BM_CLPCR_LPM;
 	switch (mode) {
 	case WAIT_CLOCKED:
+		imx6q_enable_wb(false);
 		break;
 	case WAIT_UNCLOCKED:
 		val |= 0x1 << BP_CLPCR_LPM;
@@ -92,6 +119,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= 0x3 << BP_CLPCR_STBY_COUNT;
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
+		imx6q_enable_wb(true);
 		break;
 	default:
 		return -EINVAL;
-- 
cgit v1.2.3-70-g09d2


From 263475d4e0b0623fb7a22f8ac0a5c01017eabf20 Mon Sep 17 00:00:00 2001
From: Anson Huang <b20788@freescale.com>
Date: Thu, 21 Mar 2013 10:58:06 -0400
Subject: ARM: imx: enable RBC to support anatop LPM mode

RBC is to control whether some ANATOP sub modules
can enter lpm mode when SOC is into STOP mode, if
RBC is enabled and PMIC_VSTBY_REQ is set, ANATOP
will have below behaviors:

1. Digital LDOs(CORE, SOC and PU) are bypassed;
2. Analog LDOs(1P1, 2P5, 3P0) are disabled;

As the 2P5 is necessary for DRAM IO pre-drive in
STOP mode, so we need to enable weak 2P5 in STOP
mode when 2P5 LDO is disabled.

For RBC settings, there are some rules as below
due to hardware design:

1. All interrupts must be masked during operating
   RBC registers;
2. At least 2 CKIL(32K) cycles is needed after the
   RBC setting is changed.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/anatop.c    | 19 +++++++++++++++++++
 arch/arm/mach-imx/clk-imx6q.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-imx/common.h    |  2 ++
 arch/arm/mach-imx/gpc.c       | 23 ++++++++++++++++++++++-
 4 files changed, 86 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index b396b92526d..8b18b3c3bcf 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -19,17 +19,34 @@
 #define REG_SET		0x4
 #define REG_CLR		0x8
 
+#define ANADIG_REG_2P5		0x130
 #define ANADIG_REG_CORE		0x140
+#define ANADIG_ANA_MISC0	0x150
 #define ANADIG_USB1_CHRG_DETECT	0x1b0
 #define ANADIG_USB2_CHRG_DETECT	0x210
 #define ANADIG_DIGPROG		0x260
 
+#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG	0x40000
 #define BM_ANADIG_REG_CORE_FET_ODRIVE		0x20000000
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG	0x1000
 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B	0x80000
 #define BM_ANADIG_USB_CHRG_DETECT_EN_B		0x100000
 
 static struct regmap *anatop;
 
+static void imx_anatop_enable_weak2p5(bool enable)
+{
+	u32 reg, val;
+
+	regmap_read(anatop, ANADIG_ANA_MISC0, &val);
+
+	/* can only be enabled when stop_mode_config is clear. */
+	reg = ANADIG_REG_2P5;
+	reg += (enable && (val & BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG) == 0) ?
+		REG_SET : REG_CLR;
+	regmap_write(anatop, reg, BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG);
+}
+
 static void imx_anatop_enable_fet_odrive(bool enable)
 {
 	regmap_write(anatop, ANADIG_REG_CORE + (enable ? REG_SET : REG_CLR),
@@ -38,12 +55,14 @@ static void imx_anatop_enable_fet_odrive(bool enable)
 
 void imx_anatop_pre_suspend(void)
 {
+	imx_anatop_enable_weak2p5(true);
 	imx_anatop_enable_fet_odrive(true);
 }
 
 void imx_anatop_post_resume(void)
 {
 	imx_anatop_enable_fet_odrive(false);
+	imx_anatop_enable_weak2p5(false);
 }
 
 void imx_anatop_usb_chrg_detect_disable(void)
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 262b7b6c79a..23b799a51e6 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/of.h>
@@ -25,6 +26,8 @@
 
 #define CCR				0x0
 #define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
 
 #define CCGR0				0x68
 #define CCGR1				0x6c
@@ -70,6 +73,44 @@ void imx6q_set_chicken_bit(void)
 	writel_relaxed(val, ccm_base + CGPR);
 }
 
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+	static bool last_rbc_mode;
+
+	if (last_rbc_mode == enable)
+		return;
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+
+	last_rbc_mode = enable;
+}
+
 static void imx6q_enable_wb(bool enable)
 {
 	u32 val;
@@ -101,6 +142,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 	switch (mode) {
 	case WAIT_CLOCKED:
 		imx6q_enable_wb(false);
+		imx6q_enable_rbc(false);
 		break;
 	case WAIT_UNCLOCKED:
 		val |= 0x1 << BP_CLPCR_LPM;
@@ -120,6 +162,7 @@ int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= BM_CLPCR_VSTBY;
 		val |= BM_CLPCR_SBYOS;
 		imx6q_enable_wb(true);
+		imx6q_enable_rbc(true);
 		break;
 	default:
 		return -EINVAL;
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index d557bf38328..bcb11b1751d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -128,6 +128,8 @@ extern void imx_src_prepare_restart(void);
 extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
+extern void imx_gpc_mask_all(void);
+extern void imx_gpc_restore_all(void);
 extern void imx_anatop_init(void);
 extern void imx_anatop_pre_suspend(void);
 extern void imx_anatop_post_resume(void);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index a96ccc7f501..c20445c5603 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011-2013 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
  * The code contained herein is licensed under the GNU General Public
@@ -68,6 +68,27 @@ static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
 	return 0;
 }
 
+void imx_gpc_mask_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++) {
+		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
+		writel_relaxed(~0, reg_imr1 + i * 4);
+	}
+
+}
+
+void imx_gpc_restore_all(void)
+{
+	void __iomem *reg_imr1 = gpc_base + GPC_IMR1;
+	int i;
+
+	for (i = 0; i < IMR_NUM; i++)
+		writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
+}
+
 static void imx_gpc_irq_unmask(struct irq_data *d)
 {
 	void __iomem *reg;
-- 
cgit v1.2.3-70-g09d2


From fcc4f9fc5b23e6bb80f2c7833da323a485cad1b6 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon, 25 Mar 2013 09:20:41 -0300
Subject: ARM: mach-imx: anatop: Include "common.h"

Fix the following sparse warnings:

arch/arm/mach-imx/anatop.c:56:6: warning: symbol 'imx_anatop_pre_suspend' was not declared. Should it be static?
arch/arm/mach-imx/anatop.c:62:6: warning: symbol 'imx_anatop_post_resume' was not declared. Should it be static?
arch/arm/mach-imx/anatop.c:68:6: warning: symbol 'imx_anatop_usb_chrg_detect_disable' was not declared. Should it be static?
arch/arm/mach-imx/anatop.c:78:5: warning: symbol 'imx_anatop_get_digprog' was not declared. Should it be static?
arch/arm/mach-imx/anatop.c:86:13: warning: symbol 'imx_anatop_init' was not declared. Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/anatop.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 8b18b3c3bcf..472beee9cd9 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -15,6 +15,7 @@
 #include <linux/of_address.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include "common.h"
 
 #define REG_SET		0x4
 #define REG_CLR		0x8
-- 
cgit v1.2.3-70-g09d2


From 8ecb167f4978d86fa39d6a9c533a4c1ef3169c81 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 27 Mar 2013 10:51:33 +0100
Subject: ARM i.MX53: Add GPU clocks to clock tree

This patch adds the missing GPU2D and GPU3D mux and gate clocks,
and the graphics arbiter gate clock.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 Documentation/devicetree/bindings/clock/imx5-clock.txt | 5 +++++
 arch/arm/mach-imx/clk-imx51-imx53.c                    | 9 ++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 2a0c904c46a..342ad0fce53 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -172,6 +172,11 @@ clocks and IDs.
 	can1_serial_gate	157
 	can1_ipg_gate		158
 	owire_gate		159
+	gpu3d_s			160
+	gpu2d_s			161
+	gpu3d_gate		162
+	gpu2d_gate		163
+	garb_gate		164
 
 Examples (for mx53):
 
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 0f39f8c93b9..fdd86571aa6 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -47,6 +47,8 @@ static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
 static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
 static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
 static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
+static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
 static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
 
@@ -83,7 +85,7 @@ enum imx5_clks {
 	ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
 	can_sel, can1_serial_gate, can1_ipg_gate,
-	owire_gate,
+	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
 	clk_max
 };
 
@@ -200,6 +202,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
 	clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
 	clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+	clk[gpu3d_s] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel));
+	clk[gpu2d_s] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel));
+	clk[gpu3d_gate] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2);
+	clk[garb_gate] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4);
+	clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14);
 	clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
 	clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
 	clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
-- 
cgit v1.2.3-70-g09d2


From 686631042325a209766be89b5566b426875ca05e Mon Sep 17 00:00:00 2001
From: Markus Pargmann <mpa@pengutronix.de>
Date: Wed, 27 Mar 2013 14:01:31 +0100
Subject: ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0

There are some config options not selected by imx27 and imx5 that are
necessary to use the cpufreq-cpu0 driver.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/Kconfig | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f694074f230..1ab069cf722 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -118,6 +118,8 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select COMMON_CLK
 	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
@@ -145,6 +147,7 @@ config SOC_IMX35
 config SOC_IMX5
 	bool
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_V7
-- 
cgit v1.2.3-70-g09d2


From b1a3582dc6f1f85a56b60f688305a5194e266e02 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 27 Mar 2013 18:30:37 +0100
Subject: ARM i.MX6q: export imx6q_revision

So it can be used in clk-imx6q.c for revision dependent clock tree setup.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/common.h     | 1 +
 arch/arm/mach-imx/mach-imx6q.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index bcb11b1751d..4cba7dbb079 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -74,6 +74,7 @@ extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_restart(char, const char *);
 extern void mxc_arch_reset_init(void __iomem *);
 extern int mx53_revision(void);
+extern int imx6q_revision(void);
 extern int mx53_display_revision(void);
 extern void imx_set_aips(void __iomem *);
 extern int mxc_device_init(void);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 31aee4d5fcd..0af330d7e59 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -39,7 +39,7 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static int imx6q_revision(void)
+int imx6q_revision(void)
 {
 	static u32 rev;
 
-- 
cgit v1.2.3-70-g09d2


From 3ce921702bea62fb1d4466939d4ea841a10d534e Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 27 Mar 2013 18:30:40 +0100
Subject: ARM i.MX: Add imx_clk_divider_flags and imx_clk_mux_flags

The default is for dividers to set CLK_SET_PARENT_RATE and for muxes to
not set that flag. In the LDB clock tree, we need the opposite, so add
functions to create divider and mux clocks with configurable flags.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 9d1f3b99d1d..d9d9d9c66df 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -59,6 +59,14 @@ static inline struct clk *imx_clk_divider(const char *name, const char *parent,
 			reg, shift, width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_divider_flags(const char *name,
+		const char *parent, void __iomem *reg, u8 shift, u8 width,
+		unsigned long flags)
+{
+	return clk_register_divider(NULL, name, parent, flags,
+			reg, shift, width, 0, &imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_gate(const char *name, const char *parent,
 		void __iomem *reg, u8 shift)
 {
@@ -73,6 +81,15 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 			width, 0, &imx_ccm_lock);
 }
 
+static inline struct clk *imx_clk_mux_flags(const char *name,
+		void __iomem *reg, u8 shift, u8 width, const char **parents,
+		int num_parents, unsigned long flags)
+{
+	return clk_register_mux(NULL, name, parents, num_parents,
+			flags, reg, shift, width, 0,
+			&imx_ccm_lock);
+}
+
 static inline struct clk *imx_clk_fixed_factor(const char *name,
 		const char *parent, unsigned int mult, unsigned int div)
 {
-- 
cgit v1.2.3-70-g09d2


From cc7b633909877c5e004e3feae19a11b4053eb157 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 27 Mar 2013 18:30:41 +0100
Subject: ARM i.MX53: fix ldb di divider and selector clocks

Use imx_clk_mux_flags and imx_clk_divider_flags to set the appropriate
flags for the LDB display interface divider and selector clocks.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index fdd86571aa6..8a448c30d3f 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -430,15 +430,15 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
 	clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
 
-	clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
-				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
 	clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
-	clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+	clk[ldb_di1_div] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0);
+	clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+				mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT);
 	clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
-	clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
-				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
 	clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-	clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+	clk[ldb_di0_div] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0);
+	clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+				mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT);
 	clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
 	clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
 	clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
-- 
cgit v1.2.3-70-g09d2


From d19dacb732209ba25e2e1f912b74d9d64a608bb0 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Wed, 27 Mar 2013 18:30:42 +0100
Subject: ARM i.MX6q: fix ldb di divider and selector clocks

Use imx_clk_mux_flags and imx_clk_divider_flags to set the appropriate
flags for the LDB display interface divider and selector clocks.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx6q.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 23b799a51e6..47d0af1c421 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -354,8 +354,8 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8,  2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
 	clk[ipu1_sel]         = imx_clk_mux("ipu1_sel",         base + 0x3c, 9,  2, ipu_sels,          ARRAY_SIZE(ipu_sels));
 	clk[ipu2_sel]         = imx_clk_mux("ipu2_sel",         base + 0x3c, 14, 2, ipu_sels,          ARRAY_SIZE(ipu_sels));
-	clk[ldb_di0_sel]      = imx_clk_mux("ldb_di0_sel",      base + 0x2c, 9,  3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
-	clk[ldb_di1_sel]      = imx_clk_mux("ldb_di1_sel",      base + 0x2c, 12, 3, ldb_di_sels,       ARRAY_SIZE(ldb_di_sels));
+	clk[ldb_di0_sel]      = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9,  3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
+	clk[ldb_di1_sel]      = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels,      ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT);
 	clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
 	clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6,  3, ipu_di_pre_sels,   ARRAY_SIZE(ipu_di_pre_sels));
@@ -403,9 +403,9 @@ int __init mx6q_clocks_init(void)
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
 	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di0_podf]     = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0);
 	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
+	clk[ldb_di1_podf]     = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
-- 
cgit v1.2.3-70-g09d2


From 2df1d026edc11e88ad0a2216e79232737f5939e2 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Fri, 29 Mar 2013 19:29:02 +0800
Subject: ARM i.MX6q: Add audio/video PLL post dividers for i.MX6q rev 1.1

Query silicon revision to determine clock tree and add post
dividers for newer revisions.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/clock/imx6q-clock.txt      |  3 ++
 arch/arm/mach-imx/clk-imx6q.c                      | 40 ++++++++++++++++++----
 2 files changed, 37 insertions(+), 6 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 969b38e06ad..6deb6fd1c7c 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -205,6 +205,9 @@ clocks and IDs.
 	enet_ref		190
 	usbphy1_gate		191
 	usbphy2_gate		192
+	pll4_post_div		193
+	pll5_post_div		194
+	pll5_video_div		195
 
 Examples:
 
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 47d0af1c421..2b230f83170 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -23,6 +23,7 @@
 
 #include "clk.h"
 #include "common.h"
+#include "hardware.h"
 
 #define CCR				0x0
 #define BM_CCR_WB_COUNT			(0x7 << 16)
@@ -180,29 +181,29 @@ static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", };
 static const char *periph_sels[]	= { "periph_pre", "periph_clk2", };
 static const char *periph2_sels[]	= { "periph2_pre", "periph2_clk2", };
 static const char *axi_sels[]		= { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
-static const char *audio_sels[]	= { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *audio_sels[]	= { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
 static const char *gpu_axi_sels[]	= { "axi", "ahb", };
 static const char *gpu2d_core_sels[]	= { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
 static const char *gpu3d_core_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
 static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
 static const char *ipu_sels[]		= { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
 static const char *ldb_di_sels[]	= { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", };
-static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[]	= { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
 static const char *ipu1_di0_sels[]	= { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu1_di1_sels[]	= { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu2_di0_sels[]	= { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *ipu2_di1_sels[]	= { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
 static const char *hsi_tx_sels[]	= { "pll3_120m", "pll2_pfd2_396m", };
 static const char *pcie_axi_sels[]	= { "axi", "ahb", };
-static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *ssi_sels[]		= { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_post_div", };
 static const char *usdhc_sels[]	= { "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *enfc_sels[]	= { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
 static const char *emi_sels[]		= { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
 static const char *vdo_axi_sels[]	= { "axi", "ahb", };
 static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
-static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
-				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -236,7 +237,7 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -253,6 +254,21 @@ static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 3, .div = 4, },
 };
 
+static struct clk_div_table post_div_table[] = {
+	{ .val = 2, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 4, },
+	{ }
+};
+
+static struct clk_div_table video_div_table[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 2, .div = 1, },
+	{ .val = 3, .div = 4, },
+	{ }
+};
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
@@ -279,6 +295,14 @@ int __init mx6q_clocks_init(void)
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
 
+	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
+	if (imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+		post_div_table[1].div = 1;
+		post_div_table[2].div = 1;
+		video_div_table[1].div = 1;
+		video_div_table[2].div = 1;
+	};
+
 	/*                   type                               name         parent_name  base     div_mask */
 	clk[pll1_sys]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
 	clk[pll2_bus]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
@@ -331,6 +355,10 @@ int __init mx6q_clocks_init(void)
 	clk[pll3_60m]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 8);
 	clk[twd]       = imx_clk_fixed_factor("twd",       "arm",            1, 2);
 
+	clk[pll4_post_div] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_post_div] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock);
+	clk[pll5_video_div] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
-- 
cgit v1.2.3-70-g09d2


From 32f3b8da222b0817e0544acd888071aff674b629 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Thu, 28 Mar 2013 16:23:32 +0100
Subject: ARM i.MX6q: set the LDB serial clock parent to the video PLL

On i.MX6q revision 1.1 and later, set the video PLL as parent for
the LDB clock branch. On revision 1.0, the video PLL is useless
due to missing dividers, so keep the default parent (mmdc_ch1_axi).

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx6q.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 2b230f83170..43dbcd618be 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -547,6 +547,11 @@ int __init mx6q_clocks_init(void)
 	clk_register_clkdev(clk[cko1], "cko1", NULL);
 	clk_register_clkdev(clk[arm], NULL, "cpu0");
 
+	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
+		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
+	}
+
 	/*
 	 * The gpmi needs 100MHz frequency in the EDO/Sync mode,
 	 * We can not get the 100MHz from the pll2_pfd0_352m.
-- 
cgit v1.2.3-70-g09d2


From 7006ba24c26313631f21fff5a087c971f5c7d2ef Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Sun, 31 Mar 2013 22:39:22 +0800
Subject: ARM: imx: do not use regmap_read for ANADIG_DIGPROG

Function imx_anatop_get_digprog() that reads register ANADIG_DIGPROG is
called to identify silicon version.  Users might query silicon version
earlier than regmap subsystem is ready.  For example, imx6q clock driver
query revision in mx6q_clocks_init(), where regmap is not initialized
yet.

Change imx_anatop_get_digprog() to map anatop block and read
ANADIG_DIGPROG in the native way, so that the function can work at very
early stage.

While at it, let's move imx_print_silicon_rev() back to
imx6q_timer_init() to have the message show up a little earlier.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/anatop.c     | 15 ++++++++++++---
 arch/arm/mach-imx/mach-imx6q.c |  2 +-
 2 files changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 472beee9cd9..0cfa07dd9aa 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -78,10 +78,19 @@ void imx_anatop_usb_chrg_detect_disable(void)
 
 u32 imx_anatop_get_digprog(void)
 {
-	u32  val;
+	struct device_node *np;
+	void __iomem *anatop_base;
+	static u32 digprog;
 
-	regmap_read(anatop, ANADIG_DIGPROG, &val);
-	return val;
+	if (digprog)
+		return digprog;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+	anatop_base = of_iomap(np, 0);
+	WARN_ON(!anatop_base);
+	digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
+
+	return digprog;
 }
 
 void __init imx_anatop_init(void)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 0af330d7e59..221f3199193 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -164,7 +164,6 @@ static void __init imx6q_init_machine(void)
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
-	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 #define OCOTP_CFG3			0x440
@@ -258,6 +257,7 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	twd_local_timer_of_register();
+	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
 static const char *imx6q_dt_compat[] __initdata = {
-- 
cgit v1.2.3-70-g09d2


From 02985b94638b4de3ef9f2eb2ac5befe5bab12c26 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Thu, 28 Mar 2013 17:35:19 +0100
Subject: ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset
 Controller (SRC)

The SRC has auto-deasserting reset bits that control reset lines to
the GPU, VPU, IPU, and OpenVG IP modules. This patch adds a reset
controller that can be controlled by those devices using the
reset controller API.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/reset/fsl,imx-src.txt      | 49 ++++++++++++++++
 arch/arm/mach-imx/Kconfig                          |  1 +
 arch/arm/mach-imx/src.c                            | 65 ++++++++++++++++++++++
 3 files changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx-src.txt

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
new file mode 100644
index 00000000000..13301777e11
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt
@@ -0,0 +1,49 @@
+Freescale i.MX System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "fsl,<chip>-src"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain SRC interrupt and CPU WDOG interrupt,
+  in this order.
+- #reset-cells: 1, see below
+
+example:
+
+src: src@020d8000 {
+        compatible = "fsl,imx6q-src";
+        reg = <0x020d8000 0x4000>;
+        interrupts = <0 91 0x04 0 96 0x04>;
+        #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The system reset controller can be used to reset the GPU, VPU,
+IPU, and OpenVG IP modules on i.MX5 and i.MX6 ICs. Those device
+nodes should specify the reset line on the SRC in their resets
+property, containing a phandle to the SRC device node and a
+RESET_INDEX specifying which module to reset, as described in
+reset.txt
+
+example:
+
+        ipu1: ipu@02400000 {
+                resets = <&src 2>;
+        };
+        ipu2: ipu@02800000 {
+                resets = <&src 4>;
+        };
+
+The following RESET_INDEX values are valid for i.MX5:
+GPU_RESET     0
+VPU_RESET     1
+IPU1_RESET    2
+OPEN_VG_RESET 3
+The following additional RESET_INDEX value is valid for i.MX6:
+IPU2_RESET    4
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1ab069cf722..5b676d425ba 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -76,6 +76,7 @@ config HAVE_IMX_MMDC
 
 config HAVE_IMX_SRC
 	def_bool y if SMP
+	select ARCH_HAS_RESET_CONTROLLER
 
 config IMX_HAVE_IOMUX_V1
 	bool
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 09a742f8c7a..dec641108b5 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -14,16 +14,72 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
 
 #define SRC_SCR				0x000
 #define SRC_GPR1			0x020
 #define BP_SRC_SCR_WARM_RESET_ENABLE	0
+#define BP_SRC_SCR_SW_GPU_RST		1
+#define BP_SRC_SCR_SW_VPU_RST		2
+#define BP_SRC_SCR_SW_IPU1_RST		3
+#define BP_SRC_SCR_SW_OPEN_VG_RST	4
+#define BP_SRC_SCR_SW_IPU2_RST		12
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
 
 static void __iomem *src_base;
+static DEFINE_SPINLOCK(scr_lock);
+
+static const int sw_reset_bits[5] = {
+	BP_SRC_SCR_SW_GPU_RST,
+	BP_SRC_SCR_SW_VPU_RST,
+	BP_SRC_SCR_SW_IPU1_RST,
+	BP_SRC_SCR_SW_OPEN_VG_RST,
+	BP_SRC_SCR_SW_IPU2_RST
+};
+
+static int imx_src_reset_module(struct reset_controller_dev *rcdev,
+		unsigned long sw_reset_idx)
+{
+	unsigned long timeout;
+	unsigned long flags;
+	int bit;
+	u32 val;
+
+	if (!src_base)
+		return -ENODEV;
+
+	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
+		return -EINVAL;
+
+	bit = 1 << sw_reset_bits[sw_reset_idx];
+
+	spin_lock_irqsave(&scr_lock, flags);
+	val = readl_relaxed(src_base + SRC_SCR);
+	val |= bit;
+	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock_irqrestore(&scr_lock, flags);
+
+	timeout = jiffies + msecs_to_jiffies(1000);
+	while (readl(src_base + SRC_SCR) & bit) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	return 0;
+}
+
+static struct reset_control_ops imx_src_ops = {
+	.reset = imx_src_reset_module,
+};
+
+static struct reset_controller_dev imx_reset_controller = {
+	.ops = &imx_src_ops,
+	.nr_resets = ARRAY_SIZE(sw_reset_bits),
+};
 
 void imx_enable_cpu(int cpu, bool enable)
 {
@@ -31,9 +87,11 @@ void imx_enable_cpu(int cpu, bool enable)
 
 	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 }
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
@@ -60,9 +118,11 @@ void imx_src_prepare_restart(void)
 	u32 val;
 
 	/* clear enable bits of secondary cores */
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val &= ~(0x7 << BP_SRC_SCR_CORE1_ENABLE);
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 
 	/* clear persistent entry register of primary core */
 	writel_relaxed(0, src_base + SRC_GPR1);
@@ -77,11 +137,16 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
+	imx_reset_controller.of_node = np;
+	reset_controller_register(&imx_reset_controller);
+
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
 	 */
+	spin_lock(&scr_lock);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val &= ~(1 << BP_SRC_SCR_WARM_RESET_ENABLE);
 	writel_relaxed(val, src_base + SRC_SCR);
+	spin_unlock(&scr_lock);
 }
-- 
cgit v1.2.3-70-g09d2


From 04b41e84ff6a49e62c8a787b278af823e78354f4 Mon Sep 17 00:00:00 2001
From: Martin Fuzzey <mfuzzey@parkeon.com>
Date: Tue, 19 Mar 2013 17:57:01 +0100
Subject: ARM: i.MX53 Add the cko1, cko2 clock outputs.

These two clocks connect to external pins and can be muxed to
various internal clocks.
They are typically used either for debugging or to provide
clocks to external chips (eg audio codecs).

Currently only the selectable clocks that already exist in the clock tree
have been added.

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../devicetree/bindings/clock/imx5-clock.txt       |  6 ++++
 arch/arm/mach-imx/clk-imx51-imx53.c                | 34 ++++++++++++++++++++++
 2 files changed, 40 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 342ad0fce53..838ab8801e9 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -177,6 +177,12 @@ clocks and IDs.
 	gpu3d_gate		162
 	gpu2d_gate		163
 	garb_gate		164
+	cko1_sel		165
+	cko1_podf		166
+	cko1			167
+	cko2_sel		168
+	cko2_podf		169
+	cko2			170
 
 Examples (for mx53):
 
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 8a448c30d3f..a163e0e365d 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -51,6 +51,28 @@ static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
 static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
 static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", };
+static const char *mx53_cko1_sel[] = {
+	"cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw",
+	"emi_slow_podf", "pll4_sw", "nfc_podf", "dummy",
+	"di_pred", "dummy", "dummy", "ahb",
+	"ipg", "per_root", "ckil", "dummy",};
+static const char *mx53_cko2_sel[] = {
+	"dummy"/* dptc_core */, "dummy"/* dptc_perich */,
+	"dummy", "esdhc_a_podf",
+	"usboh3_podf", "dummy"/* wrck_clk_root */,
+	"ecspi_podf", "dummy"/* pll1_ref_clk */,
+	"esdhc_b_podf", "dummy"/* ddr_clk_root */,
+	"dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */,
+	"vpu_sel", "ipu_sel",
+	"osc", "ckih1",
+	"dummy", "esdhc_c_sel",
+	"ssi1_root_podf", "ssi2_root_podf",
+	"dummy", "dummy",
+	"dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */,
+	"dummy"/* tve_out */, "usb_phy_sel",
+	"tve_sel", "lp_apm",
+	"uart_root", "dummy"/* spdif0_clk_root */,
+	"dummy", "dummy", };
 
 enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
@@ -86,6 +108,8 @@ enum imx5_clks {
 	epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate,
 	can_sel, can1_serial_gate, can1_ipg_gate,
 	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
+	cko1_sel, cko1_podf, cko1,
+	cko2_sel, cko2_podf, cko2,
 	clk_max
 };
 
@@ -463,6 +487,16 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
 
+	clk[cko1_sel] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4,
+				mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel));
+	clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3);
+	clk[cko1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7);
+
+	clk[cko2_sel] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5,
+				mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel));
+	clk[cko2_podf] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3);
+	clk[cko2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
+
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
 			pr_err("i.MX53 clk %d: register failed with %ld\n",
-- 
cgit v1.2.3-70-g09d2


From 9a37ac481aab63c61488562c03125ba279ad57c6 Mon Sep 17 00:00:00 2001
From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Date: Sat, 16 Mar 2013 16:49:59 +0100
Subject: ARM: imx1: mm: add call to mxc_device_init

mxc_device_init() is mandatory for mxc_aips and mxc_ahb bus registration, needed
as parents, at least, for gpio and dma.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/mm-imx1.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 7a146671e65..3c609c52d3e 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -51,6 +51,8 @@ void __init mx1_init_irq(void)
 
 void __init imx1_soc_init(void)
 {
+	mxc_device_init();
+
 	mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256,
 						MX1_GPIO_INT_PORTA, 0);
 	mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256,
-- 
cgit v1.2.3-70-g09d2


From 3c03a2fed63881abf5ecb5596625157ecfc9e4eb Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Mon, 1 Apr 2013 22:13:32 +0800
Subject: ARM: imx: add initial imx6dl support

The i.MX6 DualLite/Solo is another i.MX6 family SoC, which is highly
compatible with i.MX6 Quad/Dual.  And that's why we choose to support
it using imx6q code with cpu_is_imx6dl() check when necessary.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/Kconfig.debug         |  4 ++--
 arch/arm/mach-imx/Kconfig      |  2 +-
 arch/arm/mach-imx/clk-imx6q.c  |  2 +-
 arch/arm/mach-imx/mach-imx6q.c | 30 +++++++++++++++++++++---------
 arch/arm/mach-imx/mxc.h        | 11 +++++++++++
 5 files changed, 36 insertions(+), 13 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b31f4311ea..7e911fd4dd8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -234,11 +234,11 @@ choice
 		  on i.MX53.
 
 	config DEBUG_IMX6Q_UART
-		bool "i.MX6Q Debug UART"
+		bool "i.MX6Q/DL Debug UART"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q.
+		  on i.MX6Q/DL.
 
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 5b676d425ba..2b09a0471d7 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -790,7 +790,7 @@ config	SOC_IMX53
 	  This enables support for Freescale i.MX53 processor.
 
 config SOC_IMX6Q
-	bool "i.MX6 Quad support"
+	bool "i.MX6 Quad/DualLite support"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 43dbcd618be..15125900308 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -296,7 +296,7 @@ int __init mx6q_clocks_init(void)
 	WARN_ON(!base);
 
 	/* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */
-	if (imx6q_revision() == IMX_CHIP_REVISION_1_0) {
+	if (cpu_is_imx6q() && imx6q_revision() == IMX_CHIP_REVISION_1_0) {
 		post_div_table[1].div = 1;
 		post_div_table[2].div = 1;
 		video_div_table[1].div = 1;
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 221f3199193..8aa9d9065e8 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -39,23 +39,32 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
+static u32 chip_revision;
+
 int imx6q_revision(void)
 {
-	static u32 rev;
+	return chip_revision;
+}
 
-	if (!rev)
-		rev = imx_anatop_get_digprog();
+static void __init imx6q_init_revision(void)
+{
+	u32 rev = imx_anatop_get_digprog();
 
 	switch (rev & 0xff) {
 	case 0:
-		return IMX_CHIP_REVISION_1_0;
+		chip_revision = IMX_CHIP_REVISION_1_0;
+		break;
 	case 1:
-		return IMX_CHIP_REVISION_1_1;
+		chip_revision = IMX_CHIP_REVISION_1_1;
+		break;
 	case 2:
-		return IMX_CHIP_REVISION_1_2;
+		chip_revision = IMX_CHIP_REVISION_1_2;
+		break;
 	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
+		chip_revision = IMX_CHIP_REVISION_UNKNOWN;
 	}
+
+	mxc_set_cpu_type(rev >> 16 & 0xff);
 }
 
 void imx6q_restart(char mode, const char *cmd)
@@ -247,6 +256,7 @@ static void __init imx6q_map_io(void)
 
 static void __init imx6q_init_irq(void)
 {
+	imx6q_init_revision();
 	l2x0_of_init(0, ~0UL);
 	imx_src_init();
 	imx_gpc_init();
@@ -257,15 +267,17 @@ static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
 	twd_local_timer_of_register();
-	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
+	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+			      imx6q_revision());
 }
 
 static const char *imx6q_dt_compat[] __initdata = {
+	"fsl,imx6dl",
 	"fsl,imx6q",
 	NULL,
 };
 
-DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
+DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
 	.smp		= smp_ops(imx_smp_ops),
 	.map_io		= imx6q_map_io,
 	.init_irq	= imx6q_init_irq,
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 7dce17a9fe6..8629e5be7ec 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,8 @@
 #define MXC_CPU_MX35		35
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
+#define MXC_CPU_IMX6DL		0x61
+#define MXC_CPU_IMX6Q		0x63
 
 #define IMX_CHIP_REVISION_1_0		0x10
 #define IMX_CHIP_REVISION_1_1		0x11
@@ -150,6 +152,15 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #ifndef __ASSEMBLY__
+static inline bool cpu_is_imx6dl(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6DL;
+}
+
+static inline bool cpu_is_imx6q(void)
+{
+	return __mxc_cpu_type == MXC_CPU_IMX6Q;
+}
 
 struct cpu_op {
 	u32 cpu_rate;
-- 
cgit v1.2.3-70-g09d2


From dc13ba2950acdd7ca64de3a8addcf85ada8ee908 Mon Sep 17 00:00:00 2001
From: Shawn Guo <shawn.guo@linaro.org>
Date: Tue, 2 Apr 2013 16:37:21 +0800
Subject: ARM: imx: do not bring up unavailable cores

The i.MX6 Quad can be fused as i.MX6 Dual chip, and similarly i.MX6
DualLite can be fused as i.MX6 Solo.  The actual number of available
cores can be found out from SCU.

Since we do not reflect the fusing thing in device tree, the function
arm_dt_init_cpu_maps() will always call set_cpu_possible(true) for 4
cores on i.MX6 Quad/Dual and 2 cores for i.MX6 DualLite/Solo.  This
causes failures when kernel tries to bring those unavailable cores
online.  For example, the following failure message will be seen when
booting an i.MX6 Solo chip.

  CPU1: failed to come online

Though kernel will still boot fine, the message is somehow annoying.
Let's get rid of it by calling set_cpu_possible(false) on those
unavailable cores.

While at it, the set_cpu_possible(true) for available cores is removed,
since it's already been done in arm_dt_init_cpu_maps().

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/platsmp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 7c0b03f67b0..7061bdedfdb 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -79,8 +79,8 @@ static void __init imx_smp_init_cpus(void)
 
 	ncores = scu_get_core_count(scu_base);
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
+	for (i = ncores; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
 }
 
 void imx_smp_prepare(void)
-- 
cgit v1.2.3-70-g09d2


From 5d530bb0ad84d403d1aac79a8a8acf2c2b0a8dd7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Apr 2013 11:25:08 +0200
Subject: ARM: i.MX5: Add PATA and SRTC clocks

This adds the clock gates and the binding documentation
for PATA and SRTC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 Documentation/devicetree/bindings/clock/imx5-clock.txt | 2 ++
 arch/arm/mach-imx/clk-imx51-imx53.c                    | 3 +++
 2 files changed, 5 insertions(+)

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 838ab8801e9..84cae1f187c 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -183,6 +183,8 @@ clocks and IDs.
 	cko2_sel		168
 	cko2_podf		169
 	cko2			170
+	srtc_gate		171
+	pata_gate		172
 
 Examples (for mx53):
 
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a163e0e365d..efbccc0dcad 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -110,6 +110,7 @@ enum imx5_clks {
 	owire_gate, gpu3d_s, gpu2d_s, gpu3d_gate, gpu2d_gate, garb_gate,
 	cko1_sel, cko1_podf, cko1,
 	cko2_sel, cko2_podf, cko2,
+	srtc_gate, pata_gate,
 	clk_max
 };
 
@@ -266,6 +267,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6);
 	clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8);
 	clk[owire_gate] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22);
+	clk[srtc_gate] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28);
+	clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
-- 
cgit v1.2.3-70-g09d2


From 3f487bed1b78140a38760d774b893ff2ea8e3d17 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 8 Apr 2013 16:46:19 +0200
Subject: ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree

On i.MX53, there is only tve_ext_sel.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index efbccc0dcad..a68bb3882b8 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -45,7 +45,7 @@ static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "
 static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
 static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
 static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
-static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", };
 static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
 static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
 static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" };
@@ -188,7 +188,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
 	clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
 	clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
-	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
 	clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
 	clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
@@ -367,6 +366,8 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
 	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
 				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
+				mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
 	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
 	clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
 	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
-- 
cgit v1.2.3-70-g09d2


From 866f2f0d8d94957a36811bde43a14abd373dfb37 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 8 Apr 2013 16:46:20 +0200
Subject: ARM i.MX53: Remove unused tve_gate clkdev entry

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a68bb3882b8..7e50ec9c865 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -319,7 +319,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
 	clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
-	clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
 	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
 	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
 	clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0");
-- 
cgit v1.2.3-70-g09d2


From f550e70175c43686e5b2df24b1a4054c5afce6e4 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 8 Apr 2013 16:46:21 +0200
Subject: ARM i.MX53: make tve_ext_sel propagate rate change to PLL

This is needed so the Television Encoder driver can set the rate
on tve_clk and have it propagated up to pll4_sw.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 7e50ec9c865..a107e811004 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -472,8 +472,8 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
 	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
 				mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
-	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
-				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
 	clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
 	clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
-- 
cgit v1.2.3-70-g09d2


From d24de4952314afbbcd51b1fb72e5a320d60379dc Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 8 Apr 2013 16:46:22 +0200
Subject: ARM i.MX53: tve_di clock is not part of the CCM, but of TVE

Remove the tve_di clock from the CCM clock tree. It will be provided
by the Television Encoder driver, as this clock is an output signal
of the TVE module.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 Documentation/devicetree/bindings/clock/imx5-clock.txt | 1 -
 arch/arm/mach-imx/clk-imx51-imx53.c                    | 3 +--
 2 files changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.txt b/Documentation/devicetree/bindings/clock/imx5-clock.txt
index 84cae1f187c..d71b4b2c077 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.txt
@@ -38,7 +38,6 @@ clocks and IDs.
 	usb_phy_podf		23
 	cpu_podf		24
 	di_pred			25
-	tve_di			26
 	tve_s			27
 	uart1_ipg_gate		28
 	uart1_per_gate		29
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index a107e811004..cac6a5fce9d 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -78,7 +78,7 @@ enum imx5_clks {
 	dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
 	uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
 	emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
-	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+	usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di_unused,
 	tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
 	uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
 	gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
@@ -187,7 +187,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 				usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
 	clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
 	clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
-	clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
 	clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
 	clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
 	clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
-- 
cgit v1.2.3-70-g09d2


From 80f72d2d33263429ac6a50b84b2ec5fa681a5e84 Mon Sep 17 00:00:00 2001
From: Philipp Zabel <p.zabel@pengutronix.de>
Date: Mon, 8 Apr 2013 16:46:23 +0200
Subject: ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock

Use imx_clk_mux_flags to set the appropriate flags for the TVE
selector clock. This is needed so tve_clk rate changes can propagate
up to pll4_sw.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-imx/clk-imx51-imx53.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index cac6a5fce9d..41dd4d6e5b9 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -362,8 +362,8 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
 	clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
 				mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
-	clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
-				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+	clk[tve_ext_sel] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+				mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT);
 	clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1,
 				mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel));
 	clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
-- 
cgit v1.2.3-70-g09d2


From 5c5f0421a8eea5bdaba9b9313c5bb4833aeb39cd Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 30 Apr 2013 14:58:31 +0200
Subject: ARM: imx: reset_controller may be disabled

The new reset controller API is optional, so if that is disabled,
we must not call it from platform code.

arch/arm/mach-imx/built-in.o: In function
 `imx_src_init': /git/arm-soc/arch/arm/mach-imx/src.c:144:
	undefined reference to `reset_controller_register'

Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-imx/src.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch/arm/mach-imx')

diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index dec641108b5..4e0236c89c5 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -138,7 +138,8 @@ void __init imx_src_init(void)
 	WARN_ON(!src_base);
 
 	imx_reset_controller.of_node = np;
-	reset_controller_register(&imx_reset_controller);
+	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+		reset_controller_register(&imx_reset_controller);
 
 	/*
 	 * force warm reset sources to generate cold reset
-- 
cgit v1.2.3-70-g09d2