From 8040dd09c2ca7e70daf84f040beb3ced9602fce5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 10 Sep 2013 11:19:55 +0200 Subject: ARM: ixp4xx: convert remaining users to use gpiolib A few call sites inside mach-ixp4xx were still using the custom ixp4xx GPIO API with gpio_line_* accessors, convert all these to use the standard gpiolib functions instead. Also attempt to request and label all GPIOs before use. Move the GPIO requests to per-machine device_initcalls() so we are not dependent on the GPIO chip to be available at machine_init time. Cc: Imre Kaloz Cc: Alexandre Courbot Acked-by: Krzysztof Halasa Signed-off-by: Linus Walleij --- arch/arm/mach-ixp4xx/nslu2-setup.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'arch/arm/mach-ixp4xx/nslu2-setup.c') diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 7e55236c26e..ba5f1cda2a9 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -197,11 +197,8 @@ static void nslu2_power_off(void) { /* This causes the box to drop the power and go dead. */ - /* enable the pwr cntl gpio */ - gpio_line_config(NSLU2_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); + /* enable the pwr cntl gpio and assert power off */ + gpio_direction_output(NSLU2_PO_GPIO, 1); } static irqreturn_t nslu2_power_handler(int irq, void *dev_id) @@ -223,6 +220,16 @@ static irqreturn_t nslu2_reset_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static int __init nslu2_gpio_init(void) +{ + if (!machine_is_nslu2()) + return 0; + + /* Request the power off GPIO */ + return gpio_request(NSLU2_PO_GPIO, "power off"); +} +device_initcall(nslu2_gpio_init); + static void __init nslu2_timer_init(void) { /* The xtal on this machine is non-standard. */ -- cgit v1.2.3-70-g09d2