From 40306c8bc0dbef623fa02815929dace1c75046e2 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 11 Sep 2012 14:27:15 +0200 Subject: arm: mach-kirkwood: use plus instead of or for address definitions Since we are going to use IOMEM() to define many base virtual addresses, we can no longer use binary or to define the individual register addresses ("binary or" arithmetic on pointers is not allowed). Instead, use the more conventional plus operator to do so. The binary or operators were actually not useful because the low-order bits of the base address were always zero, so the usage of the binary or operators was effectively identical to a plus operator. Signed-off-by: Thomas Petazzoni Acked-by: Arnd Bergmann Tested-by: Andrew Lunn Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 110 ++++++++++++------------- 1 file changed, 55 insertions(+), 55 deletions(-) (limited to 'arch/arm/mach-kirkwood/include/mach/kirkwood.h') diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index c5b68510776..9695592d332 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -61,61 +61,61 @@ /* * Register Map */ -#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000) -#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500) -#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418) - -#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000) -#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE | 0x0030) -#define DEVICE_ID (DEV_BUS_VIRT_BASE | 0x0034) -#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0100) -#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x0140) -#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0300) -#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x0600) -#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) - -#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) - -#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) -#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70) -#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04) -#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x44000) -#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE | 0x70) -#define PCIE1_STATUS (PCIE1_VIRT_BASE | 0x1a04) - -#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) - -#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800) -#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800) -#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900) -#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900) -#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00) -#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00) -#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00) -#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00) - -#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) -#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) - -#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000) -#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000) -#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050) -#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330) -#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050) -#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330) - -#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) - -#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0xA0000) -#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0xA0000) +#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000) +#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500) +#define DDR_OPERATION_BASE (DDR_VIRT_BASE + 0x1418) + +#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000) +#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x10000) +#define SAMPLE_AT_RESET (DEV_BUS_VIRT_BASE + 0x0030) +#define DEVICE_ID (DEV_BUS_VIRT_BASE + 0x0034) +#define GPIO_LOW_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0100) +#define GPIO_HIGH_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x0140) +#define RTC_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0300) +#define SPI_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x0600) +#define I2C_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x1000) +#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2000) +#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2000) +#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE + 0x2100) +#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE + 0x2100) + +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000) + +#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x40000) +#define PCIE_LINK_CTRL (PCIE_VIRT_BASE + 0x70) +#define PCIE_STATUS (PCIE_VIRT_BASE + 0x1a04) +#define PCIE1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x44000) +#define PCIE1_LINK_CTRL (PCIE1_VIRT_BASE + 0x70) +#define PCIE1_STATUS (PCIE1_VIRT_BASE + 0x1a04) + +#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x50000) + +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x60B00) + +#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x70000) +#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x74000) + +#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x80000) +#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x80000) +#define SATA0_IF_CTRL (SATA_VIRT_BASE + 0x2050) +#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE + 0x2330) +#define SATA1_IF_CTRL (SATA_VIRT_BASE + 0x4050) +#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE + 0x4330) + +#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x90000) + +#define AUDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0xA0000) +#define AUDIO_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0xA0000) /* * Supported devices and revisions. -- cgit v1.2.3-70-g09d2