From 7c63984b86f96c71c541132c74c4b56fe2a13e1a Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 23 Sep 2010 16:52:40 -0400 Subject: ARM: do not define VMALLOC_END relative to PAGE_OFFSET VMALLOC_END is supposed to be an absolute value, while PAGE_OFFSET may vary depending on the selected user:kernel memory split mode through CONFIG_VMSPLIT_*. In fact, the goal of moving PAGE_OFFSET down is to accommodate more directly addressed RAM by the kernel below the vmalloc area, and having VMALLOC_END move along PAGE_OFFSET is rather against the very reason why PAGE_OFFSET can be moved in the first place. Signed-off-by: Nicolas Pitre --- arch/arm/mach-omap1/include/mach/vmalloc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap1/include/mach') diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h index 1b2af14df15..b001f67d695 100644 --- a/arch/arm/mach-omap1/include/mach/vmalloc.h +++ b/arch/arm/mach-omap1/include/mach/vmalloc.h @@ -17,4 +17,4 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define VMALLOC_END (PAGE_OFFSET + 0x18000000) +#define VMALLOC_END 0xd8000000 -- cgit v1.2.3-70-g09d2 From 0ea1293009826da45e1019f45dfde1e557bb30df Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 6 Jul 2010 18:30:06 +0800 Subject: arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang and Tony Lindgren , and fix for versatile express from Lorenzo Pieralisi . Signed-off-by: Jeremy Kerr Signed-off-by: Lorenzo Pieralisi Signed-off-by: Jason Wang Signed-off-by: Tony Lindgren Tested-by: Kevin Hilman --- arch/arm/kernel/debug.S | 22 +++- arch/arm/mach-aaec2000/include/mach/debug-macro.S | 10 +- arch/arm/mach-at91/include/mach/debug-macro.S | 8 +- arch/arm/mach-clps711x/include/mach/debug-macro.S | 12 +- arch/arm/mach-cns3xxx/include/mach/debug-macro.S | 10 +- arch/arm/mach-davinci/include/mach/debug-macro.S | 46 ++++---- arch/arm/mach-dove/include/mach/debug-macro.S | 11 +- arch/arm/mach-ebsa110/include/mach/debug-macro.S | 7 +- arch/arm/mach-ep93xx/include/mach/debug-macro.S | 11 +- .../arm/mach-footbridge/include/mach/debug-macro.S | 22 ++-- arch/arm/mach-gemini/include/mach/debug-macro.S | 8 +- arch/arm/mach-h720x/include/mach/debug-macro.S | 10 +- .../arm/mach-integrator/include/mach/debug-macro.S | 10 +- arch/arm/mach-iop13xx/include/mach/debug-macro.S | 16 ++- arch/arm/mach-iop32x/include/mach/debug-macro.S | 7 +- arch/arm/mach-iop33x/include/mach/debug-macro.S | 12 +- arch/arm/mach-ixp2000/include/mach/debug-macro.S | 14 +-- arch/arm/mach-ixp23xx/include/mach/debug-macro.S | 11 +- arch/arm/mach-ixp4xx/include/mach/debug-macro.S | 16 +-- arch/arm/mach-kirkwood/include/mach/debug-macro.S | 11 +- arch/arm/mach-ks8695/include/mach/debug-macro.S | 8 +- arch/arm/mach-l7200/include/mach/debug-macro.S | 38 ++++++ arch/arm/mach-lh7a40x/include/mach/debug-macro.S | 10 +- arch/arm/mach-loki/include/mach/debug-macro.S | 11 +- arch/arm/mach-lpc32xx/include/mach/debug-macro.S | 8 +- arch/arm/mach-mmp/include/mach/debug-macro.S | 11 +- arch/arm/mach-msm/include/mach/debug-macro.S | 20 +--- arch/arm/mach-mv78xx0/include/mach/debug-macro.S | 11 +- arch/arm/mach-netx/include/mach/debug-macro.S | 10 +- arch/arm/mach-nomadik/include/mach/debug-macro.S | 12 +- arch/arm/mach-ns9xxx/include/mach/debug-macro.S | 8 +- arch/arm/mach-omap1/include/mach/debug-macro.S | 68 +++++------ arch/arm/mach-omap2/include/mach/debug-macro.S | 127 ++++++++++----------- arch/arm/mach-orion5x/include/mach/debug-macro.S | 11 +- arch/arm/mach-pnx4008/include/mach/debug-macro.S | 10 +- arch/arm/mach-pxa/include/mach/debug-macro.S | 10 +- arch/arm/mach-realview/include/mach/debug-macro.S | 10 +- arch/arm/mach-rpc/include/mach/debug-macro.S | 12 +- arch/arm/mach-s3c2410/include/mach/debug-macro.S | 11 +- arch/arm/mach-s3c24a0/include/mach/debug-macro.S | 11 +- arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 11 +- arch/arm/mach-s5p6442/include/mach/debug-macro.S | 11 +- arch/arm/mach-s5pc100/include/mach/debug-macro.S | 11 +- arch/arm/mach-s5pv210/include/mach/debug-macro.S | 11 +- arch/arm/mach-s5pv310/include/mach/debug-macro.S | 11 +- arch/arm/mach-sa1100/include/mach/debug-macro.S | 36 +++--- arch/arm/mach-shark/include/mach/debug-macro.S | 7 +- arch/arm/mach-tegra/include/mach/debug-macro.S | 26 +++-- arch/arm/mach-u300/include/mach/debug-macro.S | 11 +- arch/arm/mach-ux500/include/mach/debug-macro.S | 8 +- arch/arm/mach-versatile/include/mach/debug-macro.S | 12 +- arch/arm/mach-vexpress/include/mach/debug-macro.S | 10 +- arch/arm/plat-mxc/include/mach/debug-macro.S | 8 +- arch/arm/plat-spear/include/plat/debug-macro.S | 8 +- arch/arm/plat-stmp3xxx/include/mach/debug-macro.S | 11 +- arch/arm/plat-tcc/include/mach/debug-macro.S | 11 +- 56 files changed, 440 insertions(+), 454 deletions(-) create mode 100644 arch/arm/mach-l7200/include/mach/debug-macro.S (limited to 'arch/arm/mach-omap1/include/mach') diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index f91395206a4..a0f07521ca8 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -22,7 +22,7 @@ #if defined(CONFIG_DEBUG_ICEDCC) @@ debug using ARM EmbeddedICE DCC channel - .macro addruart, rx, tmp + .macro addruart, rp, rv .endm #if defined(CONFIG_CPU_V6) @@ -121,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0 #include #endif /* CONFIG_DEBUG_ICEDCC */ +#ifdef CONFIG_MMU + .macro addruart_current, rx, tmp1, tmp2 + addruart \tmp1, \tmp2 + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + moveq \rx, \tmp1 + movne \rx, \tmp2 + .endm + +#else /* !CONFIG_MMU */ + .macro addruart_current, rx, tmp1, tmp2 + addruart \rx, \tmp1 + .endm + +#endif /* CONFIG_MMU */ + /* * Useful debugging routines */ @@ -155,7 +171,7 @@ ENDPROC(printhex2) .ltorg ENTRY(printascii) - addruart r3, r1 + addruart_current r3, r1, r2 b 2f 1: waituart r2, r3 senduart r1, r3 @@ -171,7 +187,7 @@ ENTRY(printascii) ENDPROC(printascii) ENTRY(printch) - addruart r3, r1 + addruart_current r3, r1, r2 mov r1, r0 mov r0, #0 b 1b diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S index a9cac368bfe..bc7ad5561c4 100644 --- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S +++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S @@ -10,12 +10,10 @@ */ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical - movne \rx, #io_p2v(0x80000000) @ virtual - orr \rx, \rx, #0x00000800 + .macro addruart, rp, rv + mov \rp, 0x00000800 + orr \rv, \rp, #io_p2v(0x80000000) @ virtual + orr \rp, \rp, #0x80000000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 9e750a1c1b5..0f959faf74a 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + .macro addruart, rp, rv + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 072cc6b61ba..507c6873b7e 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -14,16 +14,14 @@ #include #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #CLPS7111_PHYS_BASE - movne \rx, #CLPS7111_VIRT_BASE + .macro addruart, rp, rv #ifndef CONFIG_DEBUG_CLPS711X_UART2 - add \rx, \rx, #0x0000 @ UART1 + mov \rp, #0x0000 @ UART1 #else - add \rx, \rx, #0x1000 @ UART2 + mov \rp, #0x1000 @ UART2 #endif + orr \rv, \rp, #CLPS7111_VIRT_BASE + orr \rp, \rp, #CLPS7111_PHYS_BASE .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S index d16ce7eb00e..56d828634db 100644 --- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S @@ -10,12 +10,10 @@ * published by the Free Software Foundation. */ - .macro addruart,rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf0000000 @ virtual base - orr \rx, \rx, #0x00009000 + .macro addruart,rp,rv + mov \rp, #0x00009000 + orr \rv, \rp, #0xf0000000 @ virtual base + orr \rp, \rp, #0x10000000 .endm #include diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index f761dfdb868..9f1befc5ac3 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -29,35 +29,39 @@ davinci_uart_phys: .word 0 davinci_uart_virt: .word 0 .popsection - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use davinci_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(davinci_uart_phys) - ldrne \rx, =davinci_uart_virt - ldr \rx, [\rx] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(davinci_uart_phys) + ldrne \rp, =davinci_uart_phys + add \rv, \rp, #4 @ davinci_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? + /* Check the debug UART address set in uncompress.h */ + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? /* Copy uart phys address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_phys) - ldrne \tmp, =davinci_uart_phys - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #0] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_phys) + ldrne \rv, =davinci_uart_phys + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #0] + str \rp, [\rv] /* Copy uart virt address from decompressor uart info */ - ldreq \tmp, =__virt_to_phys(davinci_uart_virt) - ldrne \tmp, =davinci_uart_virt - ldreq \rx, =DAVINCI_UART_INFO - ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO) - ldr \rx, [\rx, #4] - str \rx, [\tmp] + ldreq \rv, =__virt_to_phys(davinci_uart_virt) + ldrne \rv, =davinci_uart_virt + ldreq \rp, =DAVINCI_UART_INFO + ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO) + ldr \rp, [\rp, #4] + str \rp, [\rv] b 10b 99: diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S index 1521d13f1d1..da8bf2bad3b 100644 --- a/arch/arm/mach-dove/include/mach/debug-macro.S +++ b/arch/arm/mach-dove/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =DOVE_SB_REGS_PHYS_BASE - ldrne \rx, =DOVE_SB_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =DOVE_SB_REGS_PHYS_BASE + ldr \rv, =DOVE_SB_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S index ebbd89f0e6c..7ef5690fd08 100644 --- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S +++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * **/ - .macro addruart, rx, tmp - mov \rx, #0xf0000000 - orr \rx, \rx, #0x00000be0 + .macro addruart, rp, rv + mov \rp, #0xf0000000 + orr \rp, \rp, #0x00000be0 + mov \rp, \rv .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S index 5cd22444e22..b25bc907636 100644 --- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S @@ -11,12 +11,11 @@ */ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base - ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base - orr \rx, \rx, #0x000c0000 + .macro addruart, rp, rv + ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base + ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base + orr \rp, \rp, #0x000c0000 + orr \rv, \rv, #0x000c0000 .endm #include diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 60dda1318f2..3c9e0c40c67 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -15,12 +15,10 @@ #ifndef CONFIG_DEBUG_DC21285_PORT /* For NetWinder debugging */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x7c000000 @ physical - movne \rx, #0xff000000 @ virtual - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0x000003f8 + orr \rv, \rp, #0x7c000000 @ physical + orr \rp, \rp, #0xff000000 @ virtual .endm #define UART_SHIFT 0 @@ -32,14 +30,14 @@ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x42000000 - movne \rx, #dc21285_high + .macro addruart, rp, rv .if dc21285_low - orrne \rx, \rx, #dc21285_low + mov \rp, #dc21285_low + .else + mov \rp, #0 .endif + orr \rv, \rp, #0x42000000 + orr \rp, \rp, #dc21285_high .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S index ad477047069..f40e006d296 100644 --- a/arch/arm/mach-gemini/include/mach/debug-macro.S +++ b/arch/arm/mach-gemini/include/mach/debug-macro.S @@ -11,11 +11,9 @@ */ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =GEMINI_UART_BASE @ physical - ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual + .macro addruart, rp, rv + ldr \rp, =GEMINI_UART_BASE @ physical + ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S index 27cafd12f03..c2093e83572 100644 --- a/arch/arm/mach-h720x/include/mach/debug-macro.S +++ b/arch/arm/mach-h720x/include/mach/debug-macro.S @@ -16,12 +16,10 @@ .equ io_virt, IO_VIRT .equ io_phys, IO_PHYS - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #io_phys @ physical base address - movne \rx, #io_virt @ virtual address - add \rx, \rx, #0x00020000 @ UART1 + .macro addruart, rp, rv + mov \rp, #0x00020000 @ UART1 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S index 87a6888ae01..a1f598fd3a5 100644 --- a/arch/arm/mach-integrator/include/mach/debug-macro.S +++ b/arch/arm/mach-integrator/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x16000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x16000000 >> 4 + .macro addruart, rp, rv + mov \rp, #0x16000000 @ physical base address + mov \rv, #0xf0000000 @ virtual base + add \rv, \rv, #0x16000000 >> 4 .endm #include diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S index c9d6ba46963..e664466d51b 100644 --- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S @@ -11,15 +11,13 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - orreq \rx, \rx, #0x00d80000 - movne \rx, #0xfe000000 @ virtual - orrne \rx, \rx, #0x00e80000 - orr \rx, \rx, #0x00002300 - orr \rx, \rx, #0x00000040 + .macro addruart, rp, rv + mov \rp, #0x00002300 + orr \rp, \rp, #0x00000040 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e80000 + orr \rp, \rp, #0xff000000 @ physical + orr \rp, \rp, #0x00d80000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S index 736afe1edd1..ff9e76c09f3 100644 --- a/arch/arm/mach-iop32x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mov \rx, #0xfe000000 @ physical as well as virtual - orr \rx, \rx, #0x00800000 @ location of the UART + .macro addruart, rp, rv + mov \rp, #0xfe000000 @ physical as well as virtual + orr \rp, \rp, #0x00800000 @ location of the UART + mov \rv, \rp .endm #define UART_SHIFT 0 diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S index addb2da7842..40c500dd1fa 100644 --- a/arch/arm/mach-iop33x/include/mach/debug-macro.S +++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - moveq \rx, #0xff000000 @ physical - movne \rx, #0xfe000000 @ virtual - orr \rx, \rx, #0x00ff0000 - orr \rx, \rx, #0x0000f700 + .macro addruart, rp, rv + mov \rp, #0x00ff0000 + orr \rp, \rp, #0x0000f700 + orr \rv, #0xfe000000 @ virtual + orr \rp, #0xff000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S index 6a827681680..0ef533b2097 100644 --- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S @@ -11,16 +11,14 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc0000000 @ Physical base - movne \rx, #0xfe000000 @ virtual base - orrne \rx, \rx, #0x00f00000 - orr \rx, \rx, #0x00030000 + .macro addruart, rp, rv + mov \rp, #0x00030000 #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 #endif + orr \rv, \rp, #0xfe000000 @ virtual base + orr \rv, \rv, #0x00f00000 + orr \rp, \rp, #0xc0000000 @ Physical base .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S index a82e375465e..f7c6eef7fa2 100644 --- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S @@ -12,13 +12,12 @@ */ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ mmu enabled? - ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical - ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual + .macro addruart, rp, rv + ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical + ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual #ifdef __ARMEB__ - orr \rx, \rx, #0x00000003 + orr \rp, \rp, #0x00000003 + orr \rv, \rv, #0x00000003 #endif .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 3fc66d6d00a..b974a49c0af 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -10,16 +10,16 @@ * published by the Free Software Foundation. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0xc8000000 - movne \rx, #0xff000000 - orrne \rx, \rx, #0x00b00000 + .macro addruart, rp, rv #ifdef __ARMEB__ - add \rx,\rx,#3 @ Uart regs are at off set of 3 if - @ byte writes used - Big Endian. + mov \rp, #3 @ Uart regs are at off set of 3 if + @ byte writes used - Big Endian. +#else + mov \rp, #0 #endif + orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rv, #0x00b00000 + orr \rp, \rp, #0xc8000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index d0606774dea..db06ae437d0 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE - ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =KIRKWOOD_REGS_PHYS_BASE + ldr \rv, =KIRKWOOD_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S index cf2095da237..bf516adf192 100644 --- a/arch/arm/mach-ks8695/include/mach/debug-macro.S +++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S @@ -14,11 +14,9 @@ #include #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =KS8695_UART_PA @ physical base address - ldrne \rx, =KS8695_UART_VA @ virtual base address + .macro addruart, rp, rv + ldr \rp, =KS8695_UART_PA @ physical base address + ldr \rv, =KS8695_UART_VA @ virtual base address .endm .macro senduart, rd, rx diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S new file mode 100644 index 00000000000..b0a2db77d39 --- /dev/null +++ b/arch/arm/mach-l7200/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-l7200/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + + .equ io_virt, IO_BASE + .equ io_phys, IO_START + + .macro addruart, rp, rv + mov \rp, #0x00044000 @ UART1 +@ mov \rp, #0x00045000 @ UART2 + add \rv, \rp, #io_virt @ virtual address + add \rp, \rp, #io_phys @ physical base address + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0] @ UARTDR + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S index c0dcbbba22b..cff33625276 100644 --- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S +++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S @@ -14,12 +14,10 @@ @ It is not known if this will be appropriate for every 40x @ board. - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00000700 @ offset from base - orreq \rx, \rx, #0x80000000 @ physical base - orrne \rx, \rx, #0xf8000000 @ virtual base + .macro addruart, rp, rv + mov \rp, #0x00000700 @ offset from base + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S index 3136c913a92..cc90d99ac76 100644 --- a/arch/arm/mach-loki/include/mach/debug-macro.S +++ b/arch/arm/mach-loki/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =LOKI_REGS_PHYS_BASE - ldrne \rx, =LOKI_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =LOKI_REGS_PHYS_BASE + ldr \rv, =LOKI_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S index 621744d6b15..629e744aeb9 100644 --- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S @@ -20,11 +20,9 @@ * Debug output is hardcoded to standard UART 5 */ - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =0x40090000 - ldrne \rx, =0xF4090000 + .macro addruart, rp, rv + ldreq \rp, =0x40090000 + ldrne \rv, =0xF4090000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S index 76deff238e1..7e2ebd3efc7 100644 --- a/arch/arm/mach-mmp/include/mach/debug-macro.S +++ b/arch/arm/mach-mmp/include/mach/debug-macro.S @@ -11,12 +11,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =APB_PHYS_BASE @ physical - ldrne \rx, =APB_VIRT_BASE @ virtual - orr \rx, \rx, #0x00017000 + .macro addruart, rp, rv + ldr \rp, =APB_PHYS_BASE @ physical + ldr \rv, =APB_VIRT_BASE @ virtual + orr \rp, \rp, #0x00017000 + orr \rv, \rv, #0x00017000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 238c4f132cd..fbd5d90dcc8 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -20,12 +20,9 @@ #include #ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS - .macro addruart, rx, tmp - @ see if the MMU is enabled and select appropriate base address - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =MSM_DEBUG_UART_PHYS - ldrne \rx, =MSM_DEBUG_UART_BASE + .macro addruart, rp, rv + ldr \rp, =MSM_DEBUG_UART_PHYS + ldr \rv, =MSM_DEBUG_UART_BASE .endm .macro senduart,rd,rx @@ -39,16 +36,7 @@ tst \rd, #0x04 beq 1001b .endm -#else - .macro addruart, rx, tmp - .endm - - .macro senduart,rd,rx - .endm - - .macro waituart,rd,rx - .endm -#endif .macro busyuart,rd,rx .endm +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S index cd81689c462..04891428e48 100644 --- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S @@ -8,12 +8,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =MV78XX0_REGS_PHYS_BASE - ldrne \rx, =MV78XX0_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =MV78XX0_REGS_PHYS_BASE + ldr \rv, =MV78XX0_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S index e96339e71d8..56a91522818 100644 --- a/arch/arm/mach-netx/include/mach/debug-macro.S +++ b/arch/arm/mach-netx/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x00100000 @ physical - movne \rx, #io_p2v(0x00100000) @ virtual - orr \rx, \rx, #0x00000a00 + .macro addruart, rp, rv + mov \rp, #0x00000a00 + orr \rv, \rp, #io_p2v(0x00100000) @ virtual + orr \rp, \rp, #0x00100000 @ physical .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S index 4f92acfba95..e7151b4b888 100644 --- a/arch/arm/mach-nomadik/include/mach/debug-macro.S +++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S @@ -10,13 +10,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 @ physical base address - movne \rx, #0xf0000000 @ virtual base - add \rx, \rx, #0x00100000 - add \rx, \rx, #0x000fb000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + add \rp, \rp, #0x000fb000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x10000000 @ physical base address .endm #include diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S index 5c934bdb715..5a2acbdc3d6 100644 --- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S +++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S @@ -12,11 +12,9 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0) - ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) + .macro addruart, rp, rv + ldr \rp, =NS9XXX_CSxSTAT_PHYS(0) + ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0)) .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index 671408eb4ab..6a0fa046236 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -9: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +9: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ -10: cmp \rx, #0 @ no port configured? +10: cmp \rp, #0 @ no port configured? beq 11f @ if none, try to use UART1 - cmp \rx, #OMAP1UART1 + cmp \rp, #OMAP1UART1 beq 11f @ configure OMAP1UART1 - cmp \rx, #OMAP1UART2 + cmp \rp, #OMAP1UART2 beq 12f @ configure OMAP1UART2 - cmp \rx, #OMAP1UART3 + cmp \rp, #OMAP1UART3 beq 13f @ configure OMAP2UART3 /* Configure the UART offset from the phys/virt base */ -11: mov \rx, #0x00fb0000 @ OMAP1UART1 +11: mov \rp, #0x00fb0000 @ OMAP1UART1 b 98f -12: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 +12: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 b 98f -13: mov \rx, #0x00fb0000 @ OMAP1UART1 - orr \rx, \rx, #0x00000800 @ OMAP1UART2 - orr \rx, \rx, #0x00009000 @ OMAP1UART3 +13: mov \rp, #0x00fb0000 @ OMAP1UART1 + orr \rp, \rp, #0x00000800 @ OMAP1UART2 + orr \rp, \rp, #0x00009000 @ OMAP1UART3 /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0xff000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0xff000000 @ phys base - add \rx, \rx, #0xfe000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] +98: add \rp, \rp, #0xff000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0xff000000 @ phys base + add \rp, \rp, #0xfe000000 @ virt base + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 9b 99: .endm diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S index 09331bbbda5..6a4d4136002 100644 --- a/arch/arm/mach-omap2/include/mach/debug-macro.S +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S @@ -31,95 +31,94 @@ omap_uart_lsr: .word 0 * the desired UART phys and virt addresses temporarily into * the omap_uart_phys and omap_uart_virt above. */ - .macro addruart, rx, tmp + .macro addruart, rp, rv /* Use omap_uart_phys/virt if already configured */ -10: mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address - ldrne \rx, =omap_uart_virt @ virtual base address - ldr \rx, [\rx, #0] - cmp \rx, #0 @ is port configured? +10: mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rp, =omap_uart_phys @ MMU enabled + add \rv, \rp, #4 @ omap_uart_virt + ldr \rp, [\rp, #0] + ldr \rv, [\rv, #0] + cmp \rp, #0 @ is port configured? + cmpne \rv, #0 bne 99f @ already configured /* Check the debug UART configuration set in uncompress.h */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =OMAP_UART_INFO - ldrne \rx, =__phys_to_virt(OMAP_UART_INFO) - ldr \rx, [\rx, #0] + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + ldreq \rp, =OMAP_UART_INFO @ MMU not enabled + ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled + ldr \rp, [\rp, #0] /* Select the UART to use based on the UART1 scratchpad value */ - cmp \rx, #0 @ no port configured? + cmp \rp, #0 @ no port configured? beq 21f @ if none, try to use UART1 - cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1 + cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1 beq 21f @ configure OMAP2/3/4UART1 - cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2 + cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2 beq 22f @ configure OMAP2/3/4UART2 - cmp \rx, #OMAP2UART3 @ only on 24xx + cmp \rp, #OMAP2UART3 @ only on 24xx beq 23f @ configure OMAP2UART3 - cmp \rx, #OMAP3UART3 @ only on 34xx + cmp \rp, #OMAP3UART3 @ only on 34xx beq 33f @ configure OMAP3UART3 - cmp \rx, #OMAP4UART3 @ only on 44xx + cmp \rp, #OMAP4UART3 @ only on 44xx beq 43f @ configure OMAP4UART3 - cmp \rx, #OMAP3UART4 @ only on 36xx + cmp \rp, #OMAP3UART4 @ only on 36xx beq 34f @ configure OMAP3UART4 - cmp \rx, #OMAP4UART4 @ only on 44xx + cmp \rp, #OMAP4UART4 @ only on 44xx beq 44f @ configure OMAP4UART4 - cmp \rx, #ZOOM_UART @ only on zoom2/3 + cmp \rp, #ZOOM_UART @ only on zoom2/3 beq 95f @ configure ZOOM_UART /* Configure the UART offset from the phys/virt base */ -21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 +21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4 b 98f -22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 +22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4 b 98f -23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE) +23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE) b 98f -33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE +33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE b 98f -34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE) - add \rx, \rx, #0x00fb0000 - add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE +34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE) + add \rp, \rp, #0x00fb0000 + add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE b 98f -43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE) +43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE) b 98f -44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE) +44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE) b 98f -95: ldr \rx, =ZOOM_UART_BASE - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - ldr \rx, =ZOOM_UART_VIRT - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +95: ldr \rp, =ZOOM_UART_BASE + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + ldr \rp, =ZOOM_UART_VIRT + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b /* Store both phys and virt address for the uart */ -98: add \rx, \rx, #0x48000000 @ phys base - mrc p15, 0, \tmp, c1, c0 - tst \tmp, #1 @ MMU enabled? - ldreq \tmp, =__virt_to_phys(omap_uart_phys) - ldrne \tmp, =omap_uart_phys - str \rx, [\tmp, #0] - sub \rx, \rx, #0x48000000 @ phys base - add \rx, \rx, #0xfa000000 @ virt base - ldreq \tmp, =__virt_to_phys(omap_uart_virt) - ldrne \tmp, =omap_uart_virt - str \rx, [\tmp, #0] - mov \rx, #(UART_LSR << OMAP_PORT_SHIFT) - ldreq \tmp, =__virt_to_phys(omap_uart_lsr) - ldrne \tmp, =omap_uart_lsr - str \rx, [\tmp, #0] +98: add \rp, \rp, #0x48000000 @ phys base + mrc p15, 0, \rv, c1, c0 + tst \rv, #1 @ MMU enabled? + ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled + ldrne \rv, =omap_uart_phys @ MMU enabled + str \rp, [\rv, #0] + sub \rp, \rp, #0x48000000 @ phys base + add \rp, \rp, #0xfa000000 @ virt base + add \rv, \rv, #4 @ omap_uart_virt + str \rp, [\rv, #0] + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) + add \rv, \rv, #4 @ omap_uart_lsr + str \rp, [\rv, #0] b 10b 99: @@ -131,9 +130,9 @@ omap_uart_lsr: .word 0 .macro busyuart,rd,rx 1001: mrc p15, 0, \rd, c1, c0 - tst \rd, #1 @ MMU enabled? - ldreq \rd, =__virt_to_phys(omap_uart_lsr) - ldrne \rd, =omap_uart_lsr + tst \rd, #1 @ MMU enabled? + ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled + ldrne \rd, =omap_uart_lsr @ MMU enabled ldr \rd, [\rd, #0] ldrb \rd, [\rx, \rd] and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S index 91e0e39bb23..5e3bf5b68ae 100644 --- a/arch/arm/mach-orion5x/include/mach/debug-macro.S +++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S @@ -10,12 +10,11 @@ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION5X_REGS_PHYS_BASE - ldrne \rx, =ORION5X_REGS_VIRT_BASE - orr \rx, \rx, #0x00012000 + .macro addruart, rp, rv + ldr \rp, =ORION5X_REGS_PHYS_BASE + ldr \rv, =ORION5X_REGS_VIRT_BASE + orr \rp, \rp, #0x00012000 + orr \rv, \rv, #0x00012000 .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S index 6ca8bd30bf4..931afebaf06 100644 --- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S @@ -11,12 +11,10 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - mov \rx, #0x00090000 - addeq \rx, \rx, #0x40000000 - addne \rx, \rx, #0xf4000000 + .macro addruart, rp, rv + mov \rp, #0x00090000 + add \rv, \rp, #0xf4000000 @ virtual + add \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S index 01cf81393fe..7d5c75125d6 100644 --- a/arch/arm/mach-pxa/include/mach/debug-macro.S +++ b/arch/arm/mach-pxa/include/mach/debug-macro.S @@ -13,12 +13,10 @@ #include "hardware.h" - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x40000000 @ physical - movne \rx, #io_p2v(0x40000000) @ virtual - orr \rx, \rx, #0x00100000 + .macro addruart, rp, rv + mov \rp, #0x00100000 + orr \rv, \rp, #io_p2v(0x40000000) @ virtual + orr \rp, \rp, #0x40000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S index 86622289b74..90b687cbe04 100644 --- a/arch/arm/mach-realview/include/mach/debug-macro.S +++ b/arch/arm/mach-realview/include/mach/debug-macro.S @@ -33,12 +33,10 @@ #error "Unknown RealView platform" #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xfb000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart, rp, rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xfb000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S index 6fc8d66395d..85effffdc2b 100644 --- a/arch/arm/mach-rpc/include/mach/debug-macro.S +++ b/arch/arm/mach-rpc/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x03000000 - movne \rx, #0xe0000000 - orr \rx, \rx, #0x00010000 - orr \rx, \rx, #0x00000fe0 + .macro addruart, rp, rv + mov \rp, #0x00010000 + orr \rp, \rp, #0x00000fe0 + orr \rv, \rp, #0xe0000000 @ virtual + orr \rp, \rp, #0x03000000 @ physical .endm #define UART_SHIFT 2 diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S index 0eef78b4a6e..5882deaa56b 100644 --- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S @@ -19,13 +19,12 @@ #define S3C2410_UART1_OFF (0x4000) #define SHIFT_2440TXF (14-9) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S index 239476b81f3..0c5a7380556 100644 --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S @@ -10,13 +10,12 @@ #include #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C24XX_PA_UART - ldrne \rx, = S3C24XX_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C24XX_PA_UART + ldr \rv, = S3C24XX_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S index f9ab5d26052..a29e70550c7 100644 --- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S +++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S index bb6536147ff..e2213205d78 100644 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S @@ -15,13 +15,12 @@ #include #include - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S index 70e02e91ee3..b2ba95ddf8e 100644 --- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S @@ -22,13 +22,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, rtmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S index 7872f5c3dfc..169fe654a59 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S @@ -21,13 +21,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldr \rp, = S3C_PA_UART + ldr \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-s5pv310/include/mach/debug-macro.S index 6fb3893486b..b0d920c474d 100644 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ b/arch/arm/mach-s5pv310/include/mach/debug-macro.S @@ -20,13 +20,12 @@ * aligned and add in the offset when we load the value here. */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 - ldreq \rx, = S3C_PA_UART - ldrne \rx, = S3C_VA_UART + .macro addruart, rp, rv + ldreq \rp, = S3C_PA_UART + ldrne \rv, = S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 - add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART) + add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART) #endif .endm diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S index 336adccea54..0cd0fc9635b 100644 --- a/arch/arm/mach-sa1100/include/mach/debug-macro.S +++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S @@ -12,33 +12,37 @@ */ #include - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - movne \rx, #0xf8000000 @ virtual address + .macro addruart, rp, rv + mrc p15, 0, \rp, c1, c0 + tst \rp, #1 @ MMU enabled? + moveq \rp, #0x80000000 @ physical base address + movne \rp, #0xf8000000 @ virtual address @ We probe for the active serial port here, coherently with @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h. @ We assume r1 can be clobbered. @ see if Ser3 is active - add \rx, \rx, #0x00050000 - ldr r1, [\rx, #UTCR3] - tst r1, #UTCR3_TXE + add \rp, \rp, #0x00050000 + ldr \rv, [\rp, #UTCR3] + tst \rv, #UTCR3_TXE @ if Ser3 is inactive, then try Ser1 - addeq \rx, \rx, #(0x00010000 - 0x00050000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00010000 - 0x00050000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE @ if Ser1 is inactive, then try Ser2 - addeq \rx, \rx, #(0x00030000 - 0x00010000) - ldreq r1, [\rx, #UTCR3] - tsteq r1, #UTCR3_TXE + addeq \rp, \rp, #(0x00030000 - 0x00010000) + ldreq \rv, [\rp, #UTCR3] + tsteq \rv, #UTCR3_TXE + + @ clear top bits, and generate both phys and virt addresses + lsl \rp, \rp, #8 + lsr \rp, \rp, #8 + orr \rv, \rp, #0xf8000000 @ virtual + orr \rp, \rp, #0x80000000 @ physical - @ if all ports are inactive, then there is nothing we can do - moveq pc, lr .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S index 5ea24d4d1ba..a473f55dc71 100644 --- a/arch/arm/mach-shark/include/mach/debug-macro.S +++ b/arch/arm/mach-shark/include/mach/debug-macro.S @@ -11,9 +11,10 @@ * */ - .macro addruart, rx, tmp - mov \rx, #0xe0000000 - orr \rx, \rx, #0x000003f8 + .macro addruart, rp, rv + mov \rp, #0xe0000000 + orr \rp, \rp, #0x000003f8 + mov \rv, \rp .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 55a39564b43..8ea3bffb4e0 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -20,24 +20,28 @@ #include - .macro addruart,rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =IO_APB_PHYS @ physical - ldrne \rx, =IO_APB_VIRT @ virtual + .macro addruart, rp, rv + ldreq \rp, =IO_APB_PHYS @ physical + ldrne \rv, =IO_APB_VIRT @ virtual #if defined(CONFIG_TEGRA_DEBUG_UART_NONE) #error "A debug UART must be selected in the kernel config to use DEBUG_LL" #elif defined(CONFIG_TEGRA_DEBUG_UARTA) - orr \rx, \rx, #0x6000 + orr \rp, \rp, #0x6000 + orr \rv, \rv, #0x6000 #elif defined(CONFIG_TEGRA_DEBUG_UARTB) - ldr \tmp, =0x6040 - orr \rx, \rx, \tmp + orr \rp, \rp, #0x6000 + orr \rp, \rp, #0x40 + orr \rv, \rv, #0x6000 + orr \rv, \rv, #0x40 #elif defined(CONFIG_TEGRA_DEBUG_UARTC) - orr \rx, \rx, #0x6200 + orr \rp, \rp, #0x6200 + orr \rv, \rv, #0x6200 #elif defined(CONFIG_TEGRA_DEBUG_UARTD) - orr \rx, \rx, #0x6300 + orr \rp, \rp, #0x6300 + orr \rv, \rv, #0x6300 #elif defined(CONFIG_TEGRA_DEBUG_UARTE) - orr \rx, \rx, #0x6400 + orr \rp, \rp, #0x6400 + orr \rv, \rv, #0x6400 #endif .endm diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index 92c12420256..df715707bea 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -10,13 +10,12 @@ */ #include - .macro addruart, rx, tmp + .macro addruart, rp, rv /* If we move the address using MMU, use this. */ - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address - ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address - orr \rx, \rx, #0x00003000 + ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address + ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address + orr \rp, \rp, #0x00003000 + orr \rv, \rv, #0x00003000 .endm #include diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S index c5203b7ea55..be7c0f14e31 100644 --- a/arch/arm/mach-ux500/include/mach/debug-macro.S +++ b/arch/arm/mach-ux500/include/mach/debug-macro.S @@ -18,11 +18,9 @@ #define UX500_UART(n) __UX500_UART(n) #define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART) - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_BASE @ no, physical address - ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address + .macro addruart, rp, rv + ldr \rp, =UART_BASE @ no, physical address + ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address .endm #include diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S index 6fea7199c62..eb2cf7dc5c4 100644 --- a/arch/arm/mach-versatile/include/mach/debug-macro.S +++ b/arch/arm/mach-versatile/include/mach/debug-macro.S @@ -11,13 +11,11 @@ * */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base - orr \rx, \rx, #0x001F0000 - orr \rx, \rx, #0x00001000 + .macro addruart, rp, rv + mov \rp, #0x001F0000 + orr \rp, \rp, #0x00001000 + orr \rv, \rp, #0xf1000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index 5167e2aceeb..050d65e02a4 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -12,12 +12,10 @@ #define DEBUG_LL_UART_OFFSET 0x00009000 - .macro addruart,rx,tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x10000000 - movne \rx, #0xf8000000 @ virtual base - orr \rx, \rx, #DEBUG_LL_UART_OFFSET + .macro addruart,rp,rv + mov \rp, #DEBUG_LL_UART_OFFSET + orr \rv, \rp, #0xf8000000 @ virtual base + orr \rp, \rp, #0x10000000 @ physical base .endm #include diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 25606409aab..d56213fb901 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -62,11 +62,9 @@ #define UART_PADDR MXC91231_UART2_BASE_ADDR #define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR) #endif - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - ldreq \rx, =UART_PADDR @ physical - ldrne \rx, =UART_VADDR @ virtual + .macro addruart, rp, rv + ldr \rp, =UART_PADDR @ physical + ldr \rv, =UART_VADDR @ virtual .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 37fa593884e..e91270e4f64 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -14,11 +14,9 @@ #include #include - .macro addruart, rx - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base - movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base + .macro addruart, rp, rv + mov \rp, #SPEAR_DBG_UART_BASE @ Physical base + mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base .endm .macro senduart, rd, rx diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S index 1b9348bf0e4..d3a0985c968 100644 --- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S +++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S @@ -16,13 +16,10 @@ * http://www.gnu.org/copyleft/gpl.html */ - .macro addruart, rx, tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x80000000 @ physical base address - addeq \rx, \rx, #0x00070000 - movne \rx, #0xf0000000 @ virtual base - addne \rx, \rx, #0x00070000 + .macro addruart, rp, rv + mov \rp, #0x00070000 + add \rv, \rp, #0xf0000000 @ virtual base + add \rp, \rp, #0x80000000 @ physical base .endm .macro senduart,rd,rx diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S index 97537845df6..7662f736e42 100644 --- a/arch/arm/plat-tcc/include/mach/debug-macro.S +++ b/arch/arm/plat-tcc/include/mach/debug-macro.S @@ -9,12 +9,11 @@ * */ - .macro addruart,rx,tmp - mrc p15, 0, \rx, c1, c0 - tst \rx, #1 @ MMU enabled? - moveq \rx, #0x90000000 @ physical base address - movne \rx, #0xF1000000 @ virtual base - orr \rx, \rx, #0x00007000 @ UART0 + .macro addruart, rp, rv + moveq \rp, #0x90000000 @ physical base address + movne \rv, #0xF1000000 @ virtual base + orr \rp, \rp, #0x00007000 @ UART0 + orr \rv, \rv, #0x00007000 @ UART0 .endm .macro senduart,rd,rx -- cgit v1.2.3-70-g09d2