From 0dfc242ff05fcc4bbef1e1bf4eed6f7d01e0cb44 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Tue, 26 Jan 2010 20:12:57 -0700
Subject: OMAP1 clock: convert armwdt_ck to use the fixed divisor recalc
 function

The armwdt_ck clock uses a fixed divisor, so it can use the OMAP clock
fixed divisor recalculation code, rather than a custom function.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap1/clock.c      | 6 ------
 arch/arm/mach-omap1/clock_data.c | 3 ++-
 2 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 04f1d29cba2..3e052f6532b 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -52,12 +52,6 @@ const struct clkops clkops_dummy = {
 	.disable	= clk_omap1_dummy_disable,
 };
 
-/* XXX can be replaced with a fixed_divisor_recalc */
-unsigned long omap1_watchdog_recalc(struct clk *clk)
-{
-	return clk->parent->rate / 14;
-}
-
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 65e7b5b85d8..edefb3440d3 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -149,7 +149,8 @@ static struct arm_idlect1_clk armwdt_ck = {
 		.flags		= CLOCK_IDLE_CONTROL,
 		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
 		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
+		.fixed_div	= 14,
+		.recalc		= &omap_fixed_divisor_recalc,
 	},
 	.idlect_shift	= 0,
 };
-- 
cgit v1.2.3-70-g09d2


From 4e6d488af37980d224cbf298224db6173673f362 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 1 Feb 2010 23:26:53 +0100
Subject: ARM: 5910/1: ARM: Add tmp register for addruart and loadsp

Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/head.S                     | 20 ++++++++++----------
 arch/arm/kernel/debug.S                             | 12 ++++++------
 arch/arm/mach-aaec2000/include/mach/debug-macro.S   |  2 +-
 arch/arm/mach-at91/include/mach/debug-macro.S       |  2 +-
 arch/arm/mach-clps711x/include/mach/debug-macro.S   |  2 +-
 arch/arm/mach-davinci/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-dove/include/mach/debug-macro.S       |  2 +-
 arch/arm/mach-ebsa110/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-ep93xx/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-footbridge/include/mach/debug-macro.S |  4 ++--
 arch/arm/mach-gemini/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-h720x/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-integrator/include/mach/debug-macro.S |  2 +-
 arch/arm/mach-iop13xx/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-iop32x/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-iop33x/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-ixp2000/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-ixp23xx/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-ixp4xx/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-kirkwood/include/mach/debug-macro.S   |  2 +-
 arch/arm/mach-ks8695/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-l7200/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-lh7a40x/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-loki/include/mach/debug-macro.S       |  2 +-
 arch/arm/mach-mmp/include/mach/debug-macro.S        |  2 +-
 arch/arm/mach-msm/include/mach/debug-macro.S        |  4 ++--
 arch/arm/mach-mv78xx0/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-netx/include/mach/debug-macro.S       |  2 +-
 arch/arm/mach-nomadik/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-ns9xxx/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-omap1/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-omap2/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-orion5x/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-pnx4008/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-pxa/include/mach/debug-macro.S        |  2 +-
 arch/arm/mach-realview/include/mach/debug-macro.S   |  2 +-
 arch/arm/mach-rpc/include/mach/debug-macro.S        |  2 +-
 arch/arm/mach-s3c2410/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-s3c24a0/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-s3c6400/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-s5pc100/include/mach/debug-macro.S    |  2 +-
 arch/arm/mach-sa1100/include/mach/debug-macro.S     |  2 +-
 arch/arm/mach-shark/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-u300/include/mach/debug-macro.S       |  2 +-
 arch/arm/mach-ux500/include/mach/debug-macro.S      |  2 +-
 arch/arm/mach-versatile/include/mach/debug-macro.S  |  2 +-
 arch/arm/plat-mxc/include/mach/debug-macro.S        |  2 +-
 arch/arm/plat-stmp3xxx/include/mach/debug-macro.S   |  2 +-
 48 files changed, 64 insertions(+), 64 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4fddc509e78..99b75aa1c2e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -22,13 +22,13 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #ifdef CONFIG_CPU_V6
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 wait:		mrc	p14, 0, pc, c0, c1, 0
@@ -36,13 +36,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -58,7 +58,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -67,13 +67,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 #endif
 		.endm
 #elif defined(CONFIG_ARCH_S3C2410)
-		.macro loadsp, rb
+		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
 		.endm
 #else
-		.macro	loadsp,	rb
-		addruart \rb
+		.macro	loadsp,	rb, tmp
+		addruart \rb, \tmp
 		.endm
 #endif
 #endif
@@ -1025,7 +1025,7 @@ phex:		adr	r3, phexbuf
 		strb	r2, [r3, r1]
 		b	1b
 
-puts:		loadsp	r3
+puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1042,7 +1042,7 @@ puts:		loadsp	r3
 putc:
 		mov	r2, r0
 		mov	r0, #0
-		loadsp	r3
+		loadsp	r3, r1
 		b	2b
 
 memdump:	mov	r12, r0
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5c91addcaeb..a38b4879441 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -24,7 +24,7 @@
 
 #if defined(CONFIG_CPU_V6)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -51,7 +51,7 @@
 
 #elif defined(CONFIG_CPU_V7)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -71,7 +71,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #elif defined(CONFIG_CPU_XSCALE)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -98,7 +98,7 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 
 #else
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -164,7 +164,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3
+		addruart r3, r1
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -180,7 +180,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3
+		addruart r3, r1
 		mov	r1, r0
 		mov	r0, #0
 		b	1b
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index 0b6351d7c38..a9cac368bfe 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 
 #include "hardware.h"
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000		@ physical
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 29052ba66ad..9e750a1c1b5 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1						@ MMU enabled?
 	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 64baf9f8740..fedd8076a68 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #CLPS7111_PHYS_BASE
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index 17ab5236da6..3cd93a801d9 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #include <linux/serial_reg.h>
 #define UART_SHIFT	2
 
-		.macro addruart, rx
+		.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 9b89ec7d304..1521d13f1d1 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 1dde8227f3a..ebbd89f0e6c 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 **/
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xf0000000
 		orr	\rx, \rx, #0x00000be0
 		.endm
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 802858bc809..5cd22444e22 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 4329b812357..60dda1318f2 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x7c000000	@ physical
@@ -32,7 +32,7 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x42000000
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index d04a6eaeae1..ad477047069 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =GEMINI_UART_BASE			@ physical
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 6294a1344dd..a9ee8f0d48b 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 		.equ    io_virt, IO_BASE
 		.equ    io_phys, IO_START
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1  	       @ MMU enabled?
 		moveq   \rx, #io_phys	       @ physical base address
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index d347d659ea3..87a6888ae01 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x16000000	@ physical base address
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index 9037d2e8557..c9d6ba46963 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ mmu enabled?
 	moveq	\rx, #0xff000000	@ physical
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 58b01664ffb..736afe1edd1 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xfe000000	@ physical as well as virtual
 		orr	\rx, \rx, #0x00800000	@ location of the UART
 		.endm
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index a60c9ef05cc..addb2da7842 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ mmu enabled?
 		moveq	\rx, #0xff000000	@ physical
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 904ff56d224..6a827681680 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xc0000000	@ Physical base
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index 905db318872..a82e375465e 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ mmu enabled?
 		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 7c6a6912acd..893873eb2a0 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart,rx
+                .macro  addruart, rx, tmp
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index a4a55c199d7..d0606774dea 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index 3782c355949..cf2095da237 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =KS8695_UART_PA		@ physical base address
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index 34eed2a63e6..b69ed344c7c 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #io_phys		@ physical base address
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index 85141ed5383..c0dcbbba22b 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1                 @ MMU enabled?
 		mov     \rx, #0x00000700        @ offset from base
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index a8c20bd2f95..3136c913a92 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =LOKI_REGS_PHYS_BASE
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index a850f87de51..76deff238e1 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =APB_PHYS_BASE		@ physical
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index d48747ebcd3..528750f307e 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #ifdef CONFIG_MSM_DEBUG_UART
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	@ see if the MMU is enabled and select appropriate base address
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
@@ -40,7 +40,7 @@
 	beq	1001b
 	.endm
 #else
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index a06442fbd34..cd81689c462 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 11b9d5b4639..e96339e71d8 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x00100000		@ physical
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e876990e156..4f92acfba95 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x10000000	@ physical base address
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index c9530fba00a..0859336a8e6 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index aedb746fc33..8c74cab2fa8 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xff000000	@ physical base address
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index e9f255df916..86979d7bd87 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 #ifdef  CONFIG_ARCH_OMAP2
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index c7f808bfe27..91e0e39bb23 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart,rx
+	.macro  addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6d1407f319f..6ca8bd30bf4 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		mov	\rx, #0x00090000
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 55d6a175ab1..01cf81393fe 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x40000000		@ physical
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 932d8af1806..86622289b74 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index b2a939ffdcd..6fc8d66395d 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x03000000
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 4c29a89ad07..0eef78b4a6e 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index f0ef0ab475f..239476b81f3 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
index b18ac5266df..5c88875d6a3 100644
--- a/arch/arm/mach-s3c6400/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 9d142ccf654..e181f578948 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 1f0634d9270..336adccea54 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index f97a7626bd5..50f071c5bf4 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xe0000000
 		orr	\rx, \rx, #0x000003f8
 		.endm
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index f3a1cbbeeab..ca4a028c266 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	/* If we move the adress using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8f21b6a95dc..494408b9678 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  *
  */
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@MMU enabled?
 	moveq	\rx, #0x80000000	@MMU off, Physical address
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index b4ac00eacf6..6fea7199c62 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b148a10..5a6ae1b9e1e 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -52,7 +52,7 @@
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
 #define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		ldreq	\rx, =UART_PADDR	@ physical
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index fb3b969bf0a..1b9348bf0e4 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address
-- 
cgit v1.2.3-70-g09d2


From 4f2c49fedf833e522001bc51824b894732900a3d Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Feb 2010 08:48:53 -0800
Subject: omap: Clean the serial port defines

This way we don't have conflicts with the defines
with compiling in multiple omaps. Set the addresses
for uarts in struct omap_globals for the early serial
init code.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/include/mach/debug-macro.S | 16 +++---
 arch/arm/mach-omap1/serial.c                   |  6 +--
 arch/arm/mach-omap2/board-3630sdp.c            |  2 +-
 arch/arm/mach-omap2/board-zoom3.c              |  2 +-
 arch/arm/mach-omap2/include/mach/debug-macro.S | 15 +++---
 arch/arm/mach-omap2/serial.c                   | 15 ++++--
 arch/arm/plat-omap/common.c                    | 29 ++++++++--
 arch/arm/plat-omap/include/plat/common.h       |  6 +++
 arch/arm/plat-omap/include/plat/omap16xx.h     | 74 +++++++++++++-------------
 arch/arm/plat-omap/include/plat/serial.h       | 45 ++++++++--------
 arch/arm/plat-omap/include/plat/uncompress.h   |  7 +--
 11 files changed, 130 insertions(+), 87 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 8c74cab2fa8..9ea12f29e0b 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -11,6 +11,10 @@
  *
 */
 
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
 		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -30,13 +34,13 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+		ldrb	\rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
 1002:
 		.endm
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 6e5207c81cf..349de90194e 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase	= OMAP_UART1_BASE,
+		.mapbase	= OMAP1_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -72,7 +72,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART2_BASE,
+		.mapbase	= OMAP1_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -80,7 +80,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.mapbase	= OMAP_UART3_BASE,
+		.mapbase	= OMAP1_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 73905963281..c178e68472f 100755
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -68,7 +68,7 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 
 static void __init omap_sdp_map_io(void)
 {
-	omap2_set_globals_343x();
+	omap2_set_globals_36xx();
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index a9fe9181b01..456b6907267 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -26,7 +26,7 @@
 
 static void __init omap_zoom_map_io(void)
 {
-	omap2_set_globals_343x();
+	omap2_set_globals_36xx();
 	omap2_map_common_io();
 }
 
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 86979d7bd87..8d6da9a39d6 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,6 +11,10 @@
  *
 */
 
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
 		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
@@ -44,15 +48,10 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
+1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
-1002:
 		.endm
 
 		.macro	waituart,rd,rx
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964bec815..eb56e193998 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -74,7 +74,6 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -87,7 +86,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -100,7 +98,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -114,7 +111,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
 		.iotype		= UPIO_MEM,
@@ -125,6 +121,17 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 	}
 };
 #endif
+
+void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
+{
+	serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
+	serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
+	serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
+#ifdef CONFIG_ARCH_OMAP4
+	serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
+#endif
+}
+
 static inline unsigned int __serial_read_reg(struct uart_port *up,
 					   int offset)
 {
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bf1eaf3a27d..dddce037ab1 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -34,6 +34,7 @@
 #include <plat/control.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
+#include <plat/serial.h>
 
 #include <plat/clock.h>
 
@@ -219,6 +220,7 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_sdrc(omap2_globals);
 	omap2_set_globals_control(omap2_globals);
 	omap2_set_globals_prcm(omap2_globals);
+	omap2_set_globals_uart(omap2_globals);
 }
 
 #endif
@@ -233,6 +235,9 @@ static struct omap_globals omap242x_globals = {
 	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_242x(void)
@@ -251,6 +256,9 @@ static struct omap_globals omap243x_globals = {
 	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
 };
 
 void __init omap2_set_globals_243x(void)
@@ -259,9 +267,9 @@ void __init omap2_set_globals_243x(void)
 }
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP3)
 
-static struct omap_globals omap343x_globals = {
+static struct omap_globals omap3_globals = {
 	.class	= OMAP343X_CLASS,
 	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
 	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
@@ -269,11 +277,21 @@ static struct omap_globals omap343x_globals = {
 	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+	.uart1_phys	= OMAP3_UART1_BASE,
+	.uart2_phys	= OMAP3_UART2_BASE,
+	.uart3_phys	= OMAP3_UART3_BASE,
 };
 
 void __init omap2_set_globals_343x(void)
 {
-	__omap2_set_globals(&omap343x_globals);
+	__omap2_set_globals(&omap3_globals);
+}
+
+void __init omap2_set_globals_36xx(void)
+{
+	omap3_globals.uart4_phys = OMAP3_UART4_BASE;
+
+	__omap2_set_globals(&omap3_globals);
 }
 #endif
 
@@ -285,6 +303,10 @@ static struct omap_globals omap4_globals = {
 	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
 	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+	.uart1_phys	= OMAP4_UART1_BASE,
+	.uart2_phys	= OMAP4_UART2_BASE,
+	.uart3_phys	= OMAP4_UART3_BASE,
+	.uart4_phys	= OMAP4_UART4_BASE,
 };
 
 void __init omap2_set_globals_443x(void)
@@ -292,6 +314,7 @@ void __init omap2_set_globals_443x(void)
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
 	omap2_set_globals_prcm(&omap4_globals);
+	omap2_set_globals_uart(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 32c22272425..e04a58ec53a 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -47,11 +47,16 @@ struct omap_globals {
 	void __iomem	*prm;		/* Power and Reset Management */
 	void __iomem	*cm;		/* Clock Management */
 	void __iomem	*cm2;
+	unsigned long	uart1_phys;
+	unsigned long	uart2_phys;
+	unsigned long	uart3_phys;
+	unsigned long	uart4_phys;
 };
 
 void omap2_set_globals_242x(void);
 void omap2_set_globals_243x(void);
 void omap2_set_globals_343x(void);
+void omap2_set_globals_36xx(void);
 void omap2_set_globals_443x(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
@@ -59,6 +64,7 @@ void omap2_set_globals_tap(struct omap_globals *);
 void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
+void omap2_set_globals_uart(struct omap_globals *);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 7560b4d583a..e69e1d857b4 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -125,43 +125,43 @@
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
 /* UART3 Registers Mapping through MPU bus */
-#define UART3_RHR               (OMAP_UART3_BASE + 0)
-#define UART3_THR               (OMAP_UART3_BASE + 0)
-#define UART3_DLL               (OMAP_UART3_BASE + 0)
-#define UART3_IER               (OMAP_UART3_BASE + 4)
-#define UART3_DLH               (OMAP_UART3_BASE + 4)
-#define UART3_IIR               (OMAP_UART3_BASE + 8)
-#define UART3_FCR               (OMAP_UART3_BASE + 8)
-#define UART3_EFR               (OMAP_UART3_BASE + 8)
-#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
-#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
-#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
-#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
-#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
-#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
-#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
-#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
-#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
-#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
-#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
-#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
-#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
-#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
-#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
-#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
-#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
-#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
-#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
-#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
-#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
-#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
-#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
-#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
-#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
-#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
-#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
 
 /*
  * ---------------------------------------------------------------------------
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index f5a4a92393e..7f5a7a88a6e 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,37 +15,40 @@
 
 #include <linux/init.h>
 
-#if defined(CONFIG_ARCH_OMAP1)
 /* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#elif defined(CONFIG_ARCH_OMAP2)
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
+
 /* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#elif defined(CONFIG_ARCH_OMAP3)
+#define OMAP2_UART1_BASE	0x4806a000
+#define OMAP2_UART2_BASE	0x4806c000
+#define OMAP2_UART3_BASE	0x4806e000
+
 /* OMAP3 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP4)
+#define OMAP3_UART1_BASE	0x4806a000
+#define OMAP3_UART2_BASE	0x4806c000
+#define OMAP3_UART3_BASE	0x49020000
+#define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+
 /* OMAP4 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x48020000
-#define OMAP_UART4_BASE		0x4806e000
-#endif
+#define OMAP4_UART1_BASE	0x4806a000
+#define OMAP4_UART2_BASE	0x4806c000
+#define OMAP4_UART3_BASE	0x48020000
+#define OMAP4_UART4_BASE	0x4806e000
+
+#define OMAP_PORT_SHIFT		2
+#define OMAP7XX_PORT_SHIFT	0
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
 
+/* This is only used by 8250.c for omap1510 */
 #define is_omap_port(pt)	({int __ret = 0;			\
-			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART2_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART3_BASE)	\
+			if ((pt)->port.mapbase == OMAP1_UART1_BASE ||	\
+			    (pt)->port.mapbase == OMAP1_UART2_BASE ||	\
+			    (pt)->port.mapbase == OMAP1_UART3_BASE)	\
 				__ret = 1;				\
 			__ret;						\
 			})
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 13c305d6212..e5723c3e341 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -40,12 +40,13 @@ static void putc(int c)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP
+	/* Will get removed in the next patch, set to OMAP3 to compile */
 #ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
+	uart = (volatile u8 *)(OMAP3_UART3_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
+	uart = (volatile u8 *)(OMAP3_UART2_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
+	uart = (volatile u8 *)(OMAP3_UART1_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
 	return;
 #else
-- 
cgit v1.2.3-70-g09d2


From 0c8219f0302d0d27fda52c790d38406801e547ec Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Mon, 15 Feb 2010 08:49:01 -0800
Subject: omap: Make uncompress code and DEBUG_LL code generic

Define arch_decomp_setup() the same way as some other
architectures do. Use arch_id to configure the debug uart
based on the machine_is by storing it into the uart
scratchpad register for DEBUG_LL code to use.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/include/mach/debug-macro.S |  72 +++++++++-
 arch/arm/mach-omap2/include/mach/debug-macro.S | 117 +++++++++++++---
 arch/arm/plat-omap/include/plat/serial.h       |  33 ++++-
 arch/arm/plat-omap/include/plat/uncompress.h   | 182 ++++++++++++++++++-------
 4 files changed, 322 insertions(+), 82 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 9ea12f29e0b..b6d9584544b 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -15,18 +15,76 @@
 
 #include <plat/serial.h>
 
+		.pushsection .data
+omap_uart_phys:	.word	0x0
+omap_uart_virt:	.word	0x0
+		.popsection
+
+		/*
+		 * Note that this code won't work if the bootloader passes
+		 * a wrong machine ID number in r1. To debug, just hardcode
+		 * the desired UART phys and virt addresses temporarily into
+		 * the omap_uart_phys and omap_uart_virt above.
+		 */
 		.macro	addruart, rx, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+9:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldrne	\rx, =omap_uart_virt	@ virtual base
+		ldr	\rx, [\rx, #0]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
+		/* Check 7XX UART1 scratchpad register for uart to use */
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
+		ldrb	\rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)]
+		cmp	\rx, #0			@ anything in 7XX scratchpad?
+		bne	10f			@ found 7XX uart
+
+		/* Check 15xx/16xx UART1 scratchpad register for uart to use */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xff000000	@ physical base address
 		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
+		orr	\rx, \rx, #0x00fb0000	@ OMAP1UART1
+		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)]
+
+		/* Select the UART to use based on the UART1 scratchpad value */
+10:		cmp	\rx, #0			@ no port configured?
+		beq	11f			@ if none, try to use UART1
+		cmp	\rx, #OMAP1UART1
+		beq	11f			@ configure OMAP1UART1
+		cmp	\rx, #OMAP1UART2
+		beq	12f			@ configure OMAP1UART2
+		cmp	\rx, #OMAP1UART3
+		beq	13f			@ configure OMAP2UART3
+
+		/* Configure the UART offset from the phys/virt base */
+11:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		b	98f
+12:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		b	98f
+13:		mov	\rx, #0x00fb0000	@ OMAP1UART1
+		orr	\rx, \rx, #0x00000800	@ OMAP1UART2
+		orr	\rx, \rx, #0x00009000	@ OMAP1UART3
+
+		/* Store both phys and virt address for the uart */
+98:		add	\rx, \rx, #0xff000000	@ phys base
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		sub	\rx, \rx, #0xff000000	@ phys base
+		add	\rx, \rx, #0xfe000000	@ virt base
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		b	9b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 8d6da9a39d6..4a63a2ea484 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -15,32 +15,103 @@
 
 #include <plat/serial.h>
 
+#define UART_OFFSET(addr)	((addr) & 0x00ffffff)
+
+		.pushsection .data
+omap_uart_phys:	.word	0
+omap_uart_virt:	.word	0
+omap_uart_lsr:	.word	0
+		.popsection
+
+		/*
+		 * Note that this code won't work if the bootloader passes
+		 * a wrong machine ID number in r1. To debug, just hardcode
+		 * the desired UART phys and virt addresses temporarily into
+		 * the omap_uart_phys and omap_uart_virt above.
+		 */
 		.macro	addruart, rx, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+10:		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =omap_uart_phys	@ physical base address
+		ldrne	\rx, =omap_uart_virt	@ virtual base address
+		ldr	\rx, [\rx, #0]
+		cmp	\rx, #0			@ is port configured?
+		bne	99f			@ already configured
+
+		/* Check UART1 scratchpad register for uart to use */
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-#ifdef  CONFIG_ARCH_OMAP2
 		moveq	\rx, #0x48000000	@ physical base address
 		movne	\rx, #0xfa000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xfa000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00fb0000	@ UART 3
-		add	\rx, \rx, #0x00006000
-#endif
-#endif
+		orr	\rx, \rx, #0x0006a000	@ uart1 on omap2/3/4
+		ldrb	\rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+
+		/* Select the UART to use based on the UART1 scratchpad value */
+		cmp	\rx, #0			@ no port configured?
+		beq	21f			@ if none, try to use UART1
+		cmp	\rx, #OMAP2UART1	@ OMAP2/3/4UART1
+		beq	21f			@ configure OMAP2/3/4UART1
+		cmp	\rx, #OMAP2UART2	@ OMAP2/3/4UART2
+		beq	22f			@ configure OMAP2/3/4UART2
+		cmp	\rx, #OMAP2UART3	@ only on 24xx
+		beq	23f			@ configure OMAP2UART3
+		cmp	\rx, #OMAP3UART3	@ only on 34xx
+		beq	33f			@ configure OMAP3UART3
+		cmp	\rx, #OMAP4UART3	@ only on 44xx
+		beq	43f			@ configure OMAP4UART3
+		cmp	\rx, #OMAP3UART4	@ only on 36xx
+		beq	34f			@ configure OMAP3UART4
+		cmp	\rx, #OMAP4UART4	@ only on 44xx
+		beq	44f			@ configure OMAP4UART4
+		cmp	\rx, #ZOOM_UART		@ only on zoom2/3
+		beq	95f			@ configure ZOOM_UART
+
+		/* Configure the UART offset from the phys/virt base */
+21:		mov	\rx, #UART_OFFSET(OMAP2_UART1_BASE)	@ omap2/3/4
+		b	98f
+22:		mov	\rx, #UART_OFFSET(OMAP2_UART2_BASE)	@ omap2/3/4
+		b	98f
+23:		mov	\rx, #UART_OFFSET(OMAP2_UART3_BASE)
+		b	98f
+33:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rx, \rx, #0x00fb0000
+		add	\rx, \rx, #0x00006000		@ OMAP3_UART3_BASE
+		b	98f
+34:		mov	\rx, #UART_OFFSET(OMAP3_UART1_BASE)
+		add	\rx, \rx, #0x00fb0000
+		add	\rx, \rx, #0x00028000		@ OMAP3_UART4_BASE
+		b	98f
+43:		mov	\rx, #UART_OFFSET(OMAP4_UART3_BASE)
+		b	98f
+44:		mov	\rx, #UART_OFFSET(OMAP4_UART4_BASE)
+		b	98f
+95:		mov	\rx, #ZOOM_UART_BASE
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		mov	\rx, #ZOOM_UART_VIRT
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		mov	\rx, #(UART_LSR << ZOOM_PORT_SHIFT)
+		ldr	\tmp, =omap_uart_lsr
+		str	\rx, [\tmp, #0]
+		b	10b
+
+		/* Store both phys and virt address for the uart */
+98:		add	\rx, \rx, #0x48000000	@ phys base
+		ldr	\tmp, =omap_uart_phys
+		str	\rx, [\tmp, #0]
+		sub	\rx, \rx, #0x48000000	@ phys base
+		add	\rx, \rx, #0xfa000000	@ virt base
+		ldr	\tmp, =omap_uart_virt
+		str	\rx, [\tmp, #0]
+		mov	\rx, #(UART_LSR << OMAP_PORT_SHIFT)
+		ldr	\tmp, =omap_uart_lsr
+		str	\rx, [\tmp, #0]
+
+		b	10b
+99:
 		.endm
 
 		.macro	senduart,rd,rx
@@ -48,7 +119,9 @@
 		.endm
 
 		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)]
+1001:		ldr	\rd, =omap_uart_lsr
+		ldr	\rd, [\rd, #0]
+		ldrb	\rd, [\rx, \rd]
 		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
 		bne	1001b
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 7f5a7a88a6e..83dce4c4f7e 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -26,24 +26,49 @@
 #define OMAP2_UART3_BASE	0x4806e000
 
 /* OMAP3 serial ports */
-#define OMAP3_UART1_BASE	0x4806a000
-#define OMAP3_UART2_BASE	0x4806c000
+#define OMAP3_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE	OMAP2_UART2_BASE
 #define OMAP3_UART3_BASE	0x49020000
 #define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
 
 /* OMAP4 serial ports */
-#define OMAP4_UART1_BASE	0x4806a000
-#define OMAP4_UART2_BASE	0x4806c000
+#define OMAP4_UART1_BASE	OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE	OMAP2_UART2_BASE
 #define OMAP4_UART3_BASE	0x48020000
 #define OMAP4_UART4_BASE	0x4806e000
 
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfb000000
+
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0
+#define ZOOM_PORT_SHIFT		1
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
 #define OMAP16XX_BASE_BAUD	(48000000/16)
 #define OMAP24XX_BASE_BAUD	(48000000/16)
 
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1		11
+#define OMAP1UART2		12
+#define OMAP1UART3		13
+#define OMAP2UART1		21
+#define OMAP2UART2		22
+#define OMAP2UART3		23
+#define OMAP3UART1		OMAP2UART1
+#define OMAP3UART2		OMAP2UART2
+#define OMAP3UART3		33
+#define OMAP3UART4		34		/* Only on 36xx */
+#define OMAP4UART1		OMAP2UART1
+#define OMAP4UART2		OMAP2UART2
+#define OMAP4UART3		43
+#define OMAP4UART4		44
+#define ZOOM_UART		95		/* Only on zoom2/3 */
+
 /* This is only used by 8250.c for omap1510 */
 #define is_omap_port(pt)	({int __ret = 0;			\
 			if ((pt)->port.mapbase == OMAP1_UART1_BASE ||	\
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index e5723c3e341..81d9ec540fc 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,71 +19,155 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
+
+#include <asm/mach-types.h>
+
 #include <plat/serial.h>
 
-unsigned int system_rev;
+static volatile u8 *uart1_base;
+static int uart1_shift;
 
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define OMAP_ID_850		0x362C
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+static volatile u8 *uart_base;
+static int uart_shift;
 
-static void putc(int c)
+/*
+ * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * See also debug-macro.S, and serial.c for related code.
+ *
+ * Please note that we currently assume that:
+ * - UART1 clocks are enabled for register access
+ * - UART1 scratchpad register can be used
+ */
+static void set_uart1_scratchpad(unsigned char port)
 {
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-	/* Will get removed in the next patch, set to OMAP3 to compile */
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP3_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP3_UART2_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
-	uart = (volatile u8 *)(OMAP3_UART1_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
-	return;
-#else
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
-			shift = 0;
+	uart1_base[UART_SCR << uart1_shift] = port;
+}
 
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
+static void putc(int c)
+{
+	if (!uart_base)
 		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
 
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
 		barrier();
-	uart[UART_TX << shift] = c;
+	uart_base[UART_TX << uart_shift] = c;
 }
 
 static inline void flush(void)
 {
 }
 
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
+			dbg_uart, dbg_shft, dbg_id)			\
+	if (machine_is_##mach()) {					\
+		uart1_base = (volatile u8 *)(uart1_phys);		\
+		uart1_shift = (uart1_shft);				\
+		uart_base = (volatile u8 *)(dbg_uart);			\
+		uart_shift = (dbg_shft);				\
+		port = (dbg_id);					\
+		set_uart1_scratchpad(port);				\
+		break;							\
+	}
+
+#define DEBUG_LL_OMAP7XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
+		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	int port = 0;
+
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* omap7xx/8xx based boards using UART1 with shift 0 */
+		DEBUG_LL_OMAP7XX(1, herald);
+		DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+		/* omap15xx/16xx based boards using UART1 */
+		DEBUG_LL_OMAP1(1, ams_delta);
+		DEBUG_LL_OMAP1(1, nokia770);
+		DEBUG_LL_OMAP1(1, omap_h2);
+		DEBUG_LL_OMAP1(1, omap_h3);
+		DEBUG_LL_OMAP1(1, omap_innovator);
+		DEBUG_LL_OMAP1(1, omap_osk);
+		DEBUG_LL_OMAP1(1, omap_palmte);
+		DEBUG_LL_OMAP1(1, omap_palmz71);
+
+		/* omap15xx/16xx based boards using UART2 */
+		DEBUG_LL_OMAP1(2, omap_palmtt);
+
+		/* omap15xx/16xx based boards using UART3 */
+		DEBUG_LL_OMAP1(3, sx1);
+
+		/* omap2 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap2evm);
+		DEBUG_LL_OMAP2(1, omap_2430sdp);
+		DEBUG_LL_OMAP2(1, omap_apollon);
+		DEBUG_LL_OMAP2(1, omap_h4);
+
+		/* omap2 based boards using UART3 */
+		DEBUG_LL_OMAP2(3, nokia_n800);
+		DEBUG_LL_OMAP2(3, nokia_n810);
+		DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+		/* omap3 based boards using UART1 */
+		DEBUG_LL_OMAP2(1, omap3evm);
+		DEBUG_LL_OMAP3(1, omap_3430sdp);
+		DEBUG_LL_OMAP3(1, omap_3630sdp);
+
+		/* omap3 based boards using UART3 */
+		DEBUG_LL_OMAP3(3, cm_t35);
+		DEBUG_LL_OMAP3(3, igep0020);
+		DEBUG_LL_OMAP3(3, nokia_rx51);
+		DEBUG_LL_OMAP3(3, omap3517evm);
+		DEBUG_LL_OMAP3(3, omap3_beagle);
+		DEBUG_LL_OMAP3(3, omap3_pandora);
+		DEBUG_LL_OMAP3(3, omap_ldp);
+		DEBUG_LL_OMAP3(3, overo);
+		DEBUG_LL_OMAP3(3, touchbook);
+
+		/* omap4 based boards using UART3 */
+		DEBUG_LL_OMAP4(3, omap_4430sdp);
+
+		/* zoom2/3 external uart */
+		DEBUG_LL_ZOOM(omap_zoom2);
+		DEBUG_LL_ZOOM(omap_zoom3);
+
+	} while (0);
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
 #define arch_decomp_wdog()
-- 
cgit v1.2.3-70-g09d2


From 561b036ad9d0b4f0cd311d2e38025919c2cb437f Mon Sep 17 00:00:00 2001
From: Ladislav Michl <ladis@linux-mips.org>
Date: Mon, 15 Feb 2010 10:03:32 -0800
Subject: omap: convert boards to use physmap-flash

Convert OMAP based boards to use physmap-flash. Refreshed against today's
Linux omap kernel tree

Cc: linux-mtd@lists.infradead.org
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/Makefile            |  2 +-
 arch/arm/mach-omap1/board-fsample.c     |  9 +++++----
 arch/arm/mach-omap1/board-h2.c          |  9 +++++----
 arch/arm/mach-omap1/board-h3.c          |  9 +++++----
 arch/arm/mach-omap1/board-innovator.c   |  9 +++++----
 arch/arm/mach-omap1/board-osk.c         |  9 +++++----
 arch/arm/mach-omap1/board-palmte.c      |  9 +++++----
 arch/arm/mach-omap1/board-palmtt.c      |  9 +++++----
 arch/arm/mach-omap1/board-palmz71.c     | 10 +++++-----
 arch/arm/mach-omap1/board-perseus2.c    |  9 +++++----
 arch/arm/mach-omap1/board-sx1.c         | 11 ++++++-----
 arch/arm/mach-omap1/board-voiceblue.c   |  9 +++++----
 arch/arm/mach-omap1/flash.c             | 33 +++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/board-2430sdp.c     |  7 +++----
 arch/arm/mach-omap2/board-h4.c          |  7 +++----
 arch/arm/plat-omap/include/plat/flash.h | 16 ++++++++++++++++
 16 files changed, 112 insertions(+), 55 deletions(-)
 create mode 100644 arch/arm/mach-omap1/flash.c
 create mode 100644 arch/arm/plat-omap/include/plat/flash.h

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9ce17f13d3f..b6a537c875b 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 7e70c3c08da..096f2ed102c 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -18,18 +18,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
@@ -150,9 +151,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -164,7 +165,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index fa7cecea19f..d1100e4f65a 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
@@ -35,7 +36,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
@@ -45,6 +45,7 @@
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h2.h"
 
@@ -121,9 +122,9 @@ static struct mtd_partition h2_nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h2_nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h2_nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= h2_nor_partitions,
 	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
 };
@@ -134,7 +135,7 @@ static struct resource h2_nor_resource = {
 };
 
 static struct platform_device h2_nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h2_nor_data,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 6a7f9c391cf..a53ab8297d2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -25,6 +25,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
@@ -47,6 +47,7 @@
 #include <plat/keypad.h>
 #include <plat/dma.h>
 #include <plat/common.h>
+#include <plat/flash.h>
 
 #include "board-h3.h"
 
@@ -126,9 +127,9 @@ static struct mtd_partition nor_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -139,7 +140,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2133b006f6a..5d12fd35681 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -22,16 +22,17 @@
 #include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
+#include <plat/flash.h>
 #include <plat/fpga.h>
 #include <mach/gpio.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition innovator_partitions[] = {
 	}
 };
 
-static struct flash_platform_data innovator_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data innovator_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= innovator_partitions,
 	.nr_parts	= ARRAY_SIZE(innovator_partitions),
 };
@@ -108,7 +109,7 @@ static struct resource innovator_flash_resource = {
 };
 
 static struct platform_device innovator_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &innovator_flash_data,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ccea4f448e9..80d862001de 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -37,6 +37,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <linux/i2c/tps65010.h>
 
@@ -46,8 +47,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
+#include <plat/flash.h>
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
@@ -94,9 +95,9 @@ static struct mtd_partition osk_partitions[] = {
 	}
 };
 
-static struct flash_platform_data osk_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data osk_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= osk_partitions,
 	.nr_parts	= ARRAY_SIZE(osk_partitions),
 };
@@ -107,7 +108,7 @@ static struct resource osk_flash_resource = {
 };
 
 static struct platform_device osk5912_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &osk_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 9fe887262bd..569b4c9085c 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
@@ -31,9 +32,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/tc.h>
@@ -126,9 +127,9 @@ static struct mtd_partition palmte_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmte_rom_data = {
-	.map_name	= "map_rom",
+static struct physmap_flash_data palmte_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmte_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
 };
@@ -140,7 +141,7 @@ static struct resource palmte_rom_resource = {
 };
 
 static struct platform_device palmte_rom_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &palmte_rom_data,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index af068e3e0fe..6ad49a2cc1a 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -21,16 +21,17 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/leds.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/led.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -104,9 +105,9 @@ static struct mtd_partition palmtt_partitions[] = {
 	}
 };
 
-static struct flash_platform_data palmtt_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data palmtt_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmtt_partitions,
 	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
 };
@@ -118,7 +119,7 @@ static struct resource palmtt_flash_resource = {
 };
 
 static struct platform_device palmtt_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &palmtt_flash_data,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c7a3b6f3650..6641de9257e 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -25,14 +25,15 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/dma.h>
@@ -126,10 +127,9 @@ static struct mtd_partition palmz71_rom_partitions[] = {
 	},
 };
 
-static struct flash_platform_data palmz71_rom_data = {
-	.map_name	= "map_rom",
-	.name		= "onboardrom",
+static struct physmap_flash_data palmz71_rom_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= palmz71_rom_partitions,
 	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
 };
@@ -141,7 +141,7 @@ static struct resource palmz71_rom_resource = {
 };
 
 static struct platform_device palmz71_rom_device = {
-	.name	= "omapflash",
+	.name	= "physmap-flash",
 	.id	= -1,
 	.dev = {
 		.platform_data = &palmz71_rom_data,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 1387a4f15da..e854d5741c8 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -18,19 +18,20 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
 #include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
+#include <plat/flash.h>
 #include <plat/keypad.h>
 #include <plat/common.h>
 #include <plat/board.h>
@@ -117,9 +118,9 @@ static struct mtd_partition nor_partitions[] = {
 	},
 };
 
-static struct flash_platform_data nor_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data nor_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= nor_partitions,
 	.nr_parts	= ARRAY_SIZE(nor_partitions),
 };
@@ -131,7 +132,7 @@ static struct resource nor_resource = {
 };
 
 static struct platform_device nor_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nor_data,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 7a97fac83d8..2fb1e5f8e2e 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -22,6 +22,7 @@
 #include <linux/notifier.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/types.h>
 #include <linux/i2c.h>
 #include <linux/errno.h>
@@ -29,10 +30,10 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
@@ -287,9 +288,9 @@ static struct mtd_partition sx1_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sx1_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sx1_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 	.parts		= sx1_partitions,
 	.nr_parts	= ARRAY_SIZE(sx1_partitions),
 };
@@ -310,7 +311,7 @@ static struct resource sx1_old_flash_resource[] = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,
@@ -327,7 +328,7 @@ static struct resource sx1_new_flash_resource = {
 };
 
 static struct platform_device sx1_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &sx1_flash_data,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 16918353799..87b9436fe7c 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/mtd/physmap.h>
 #include <linux/notifier.h>
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
@@ -27,11 +28,11 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
 #include <plat/common.h>
 #include <mach/gpio.h>
+#include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
@@ -86,9 +87,9 @@ static int __init ext_uart_init(void)
 }
 arch_initcall(ext_uart_init);
 
-static struct flash_platform_data voiceblue_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data voiceblue_flash_data = {
 	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
 };
 
 static struct resource voiceblue_flash_resource = {
@@ -98,7 +99,7 @@ static struct resource voiceblue_flash_resource = {
 };
 
 static struct platform_device voiceblue_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &voiceblue_flash_data,
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
new file mode 100644
index 00000000000..0b07a78eeaa
--- /dev/null
+++ b/arch/arm/mach-omap1/flash.c
@@ -0,0 +1,33 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#include <plat/io.h>
+#include <plat/tc.h>
+
+void omap1_set_vpp(struct map_info *map, int enable)
+{
+	static int count;
+	u32 l;
+
+	if (enable) {
+		if (count++ == 0) {
+			l = omap_readl(EMIFS_CONFIG);
+			l |= OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	} else {
+		if (count && (--count == 0)) {
+			l = omap_readl(EMIFS_CONFIG);
+			l &= ~OMAP_EMIFS_CONFIG_WP;
+			omap_writel(l, EMIFS_CONFIG);
+		}
+	}
+}
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1a619787bd8..18497b7a827 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 #include <linux/err.h>
@@ -28,7 +29,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
 #include <plat/mux.h>
@@ -74,8 +74,7 @@ static struct mtd_partition sdp2430_partitions[] = {
 	}
 };
 
-static struct flash_platform_data sdp2430_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data sdp2430_flash_data = {
 	.width		= 2,
 	.parts		= sdp2430_partitions,
 	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
@@ -88,7 +87,7 @@ static struct resource sdp2430_flash_resource = {
 };
 
 static struct platform_device sdp2430_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev = {
 		.platform_data	= &sdp2430_flash_data,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 5c49c407dd5..0665f2c8dc8 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/i2c.h>
@@ -29,7 +30,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <plat/control.h>
 #include <mach/gpio.h>
@@ -115,8 +115,7 @@ static struct mtd_partition h4_partitions[] = {
 	}
 };
 
-static struct flash_platform_data h4_flash_data = {
-	.map_name	= "cfi_probe",
+static struct physmap_flash_data h4_flash_data = {
 	.width		= 2,
 	.parts		= h4_partitions,
 	.nr_parts	= ARRAY_SIZE(h4_partitions),
@@ -127,7 +126,7 @@ static struct resource h4_flash_resource = {
 };
 
 static struct platform_device h4_flash_device = {
-	.name		= "omapflash",
+	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &h4_flash_data,
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
new file mode 100644
index 00000000000..3e6327016b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -0,0 +1,16 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+extern void omap1_set_vpp(struct map_info *map, int enable);
+
+#endif
-- 
cgit v1.2.3-70-g09d2


From c8c99699bd25d8b238ba75d2530d1be90e3c39ea Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Mon, 15 Feb 2010 10:03:33 -0800
Subject: omap: McBSP: Introduce caching in register write operations

Determine cache size required per McBSP port at init time, based on
processor type running on.

Allocate space for storing cached copies of McBSP register values at
port request.

Modify omap_msbcp_write() function to update the cache with every
register write operation.

Modify omap_mcbsp_read() to support reading from cache or hardware.

Update MCBSP_READ() macro for modified omap_mcbsp_read() function API.

Introduce a new macro that reads from the cache.

Tested on OMAP1510 based Amstrad Delta using linux-omap for-next, commit
fb7380d70e041e4b3892f6b19dff7efb609d15a4 (2.6.33-rc3+ dated 2010-01-11).
Compile-tested with: omap_perseus2_730_defconfig, omap_generic_1610_defconfig,
omap_generic_2420_defconfig, omap_2430sdp_defconfig, omap_3430sdp_defconfig,
omap_4430sdp_defconfig with CONFIG_OMAP_MCBSP=y selected.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/mcbsp.c             | 16 +++++--
 arch/arm/mach-omap2/mcbsp.c             | 20 +++++++--
 arch/arm/plat-omap/include/plat/mcbsp.h |  3 +-
 arch/arm/plat-omap/mcbsp.c              | 77 +++++++++++++++++++++++----------
 4 files changed, 84 insertions(+), 32 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 6bddce104ee..f9a5cf750b5 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -99,9 +99,11 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
+#define OMAP7XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap7xx_mcbsp_pdata		NULL
 #define OMAP7XX_MCBSP_PDATA_SZ		0
+#define OMAP7XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -132,9 +134,11 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP15XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap15xx_mcbsp_pdata)
+#define OMAP15XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap15xx_mcbsp_pdata		NULL
 #define OMAP15XX_MCBSP_PDATA_SZ		0
+#define OMAP15XX_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -165,19 +169,25 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP16XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap16xx_mcbsp_pdata)
+#define OMAP16XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1)
 #else
 #define omap16xx_mcbsp_pdata		NULL
 #define OMAP16XX_MCBSP_PDATA_SZ		0
+#define OMAP16XX_MCBSP_REG_NUM		0
 #endif
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap7xx())
+	if (cpu_is_omap7xx()) {
 		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap15xx())
+		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap15xx()) {
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap16xx())
+		omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap16xx()) {
 		omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ;
+		omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16);
+	}
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 4b6e5157520..d601f9405d1 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -65,9 +65,11 @@ static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {
 	},
 };
 #define OMAP2420_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2420_mcbsp_pdata)
+#define OMAP2420_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap2420_mcbsp_pdata		NULL
 #define OMAP2420_MCBSP_PDATA_SZ		0
+#define OMAP2420_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
@@ -114,9 +116,11 @@ static struct omap_mcbsp_platform_data omap2430_mcbsp_pdata[] = {
 	},
 };
 #define OMAP2430_MCBSP_PDATA_SZ		ARRAY_SIZE(omap2430_mcbsp_pdata)
+#define OMAP2430_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap2430_mcbsp_pdata		NULL
 #define OMAP2430_MCBSP_PDATA_SZ		0
+#define OMAP2430_MCBSP_REG_NUM		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -168,9 +172,11 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
+#define OMAP34XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 #else
 #define omap34xx_mcbsp_pdata		NULL
 #define OMAP34XX_MCBSP_PDATA_SZ		0
+#define OMAP34XX_MCBSP_REG_NUM		0
 #endif
 
 static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
@@ -208,17 +214,23 @@ static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
 	},
 };
 #define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+#define OMAP44XX_MCBSP_REG_NUM		(OMAP_MCBSP_REG_RCCR / sizeof(u32) + 1)
 
 static int __init omap2_mcbsp_init(void)
 {
-	if (cpu_is_omap2420())
+	if (cpu_is_omap2420()) {
 		omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
-	if (cpu_is_omap2430())
+		omap_mcbsp_cache_size = OMAP2420_MCBSP_REG_NUM * sizeof(u16);
+	} else if (cpu_is_omap2430()) {
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
-	if (cpu_is_omap34xx())
+		omap_mcbsp_cache_size = OMAP2430_MCBSP_REG_NUM * sizeof(u32);
+	} else if (cpu_is_omap34xx()) {
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
-	if (cpu_is_omap44xx())
+		omap_mcbsp_cache_size = OMAP34XX_MCBSP_REG_NUM * sizeof(u32);
+	} else if (cpu_is_omap44xx()) {
 		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
+		omap_mcbsp_cache_size = OMAP44XX_MCBSP_REG_NUM * sizeof(u32);
+	}
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index d93fa44b1c9..4df957b1d25 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -414,9 +414,10 @@ struct omap_mcbsp {
 	u16 max_tx_thres;
 	u16 max_rx_thres;
 #endif
+	void *reg_cache;
 };
 extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count;
+extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f8245f25825..61e440a0f7c 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -28,28 +28,42 @@
 #include <plat/mcbsp.h>
 
 struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count;
+int omap_mcbsp_count, omap_mcbsp_cache_size;
 
 void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
 {
-	if (cpu_class_is_omap1() || cpu_is_omap2420())
+	if (cpu_class_is_omap1()) {
+		((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)] = (u16)val;
 		__raw_writew((u16)val, mcbsp->io_base + reg);
-	else
+	} else if (cpu_is_omap2420()) {
+		((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)] = (u16)val;
+		__raw_writew((u16)val, mcbsp->io_base + reg);
+	} else {
+		((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)] = val;
 		__raw_writel(val, mcbsp->io_base + reg);
+	}
 }
 
-int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg)
+int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
 {
-	if (cpu_class_is_omap1() || cpu_is_omap2420())
-		return __raw_readw(mcbsp->io_base + reg);
-	else
-		return __raw_readl(mcbsp->io_base + reg);
+	if (cpu_class_is_omap1()) {
+		return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+				((u16 *)mcbsp->reg_cache)[reg / sizeof(u16)];
+	} else if (cpu_is_omap2420()) {
+		return !from_cache ? __raw_readw(mcbsp->io_base + reg) :
+				((u16 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+	} else {
+		return !from_cache ? __raw_readl(mcbsp->io_base + reg) :
+				((u32 *)mcbsp->reg_cache)[reg / sizeof(u32)];
+	}
 }
 
 #define MCBSP_READ(mcbsp, reg) \
-		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg)
+		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
 #define MCBSP_WRITE(mcbsp, reg, val) \
 		omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val)
+#define MCBSP_READ_CACHE(mcbsp, reg) \
+		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
 
 #define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
 #define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
@@ -383,6 +397,7 @@ EXPORT_SYMBOL(omap_mcbsp_set_io_type);
 int omap_mcbsp_request(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	void *reg_cache;
 	int err;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -391,15 +406,21 @@ int omap_mcbsp_request(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
+	reg_cache = kzalloc(omap_mcbsp_cache_size, GFP_KERNEL);
+	if (!reg_cache) {
+		return -ENOMEM;
+	}
+
 	spin_lock(&mcbsp->lock);
 	if (!mcbsp->free) {
 		dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
 			mcbsp->id);
-		spin_unlock(&mcbsp->lock);
-		return -EBUSY;
+		err = -EBUSY;
+		goto err_kfree;
 	}
 
 	mcbsp->free = 0;
+	mcbsp->reg_cache = reg_cache;
 	spin_unlock(&mcbsp->lock);
 
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
@@ -427,7 +448,7 @@ int omap_mcbsp_request(unsigned int id)
 			dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
 					"for McBSP%d\n", mcbsp->tx_irq,
 					mcbsp->id);
-			goto error;
+			goto err_clk_disable;
 		}
 
 		init_completion(&mcbsp->rx_irq_completion);
@@ -437,16 +458,16 @@ int omap_mcbsp_request(unsigned int id)
 			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
 					"for McBSP%d\n", mcbsp->rx_irq,
 					mcbsp->id);
-			goto tx_irq;
+			goto err_free_irq;
 		}
 	}
 
 	return 0;
-tx_irq:
+err_free_irq:
 	free_irq(mcbsp->tx_irq, (void *)mcbsp);
-error:
+err_clk_disable:
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
-			mcbsp->pdata->ops->free(id);
+		mcbsp->pdata->ops->free(id);
 
 	/* Do procedure specific to omap34xx arch, if applicable */
 	omap34xx_mcbsp_free(mcbsp);
@@ -454,7 +475,12 @@ error:
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
+	spin_lock(&mcbsp->lock);
 	mcbsp->free = 1;
+	mcbsp->reg_cache = NULL;
+err_kfree:
+	spin_unlock(&mcbsp->lock);
+	kfree(reg_cache);
 
 	return err;
 }
@@ -463,6 +489,7 @@ EXPORT_SYMBOL(omap_mcbsp_request);
 void omap_mcbsp_free(unsigned int id)
 {
 	struct omap_mcbsp *mcbsp;
+	void *reg_cache;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
 		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -485,16 +512,18 @@ void omap_mcbsp_free(unsigned int id)
 		free_irq(mcbsp->tx_irq, (void *)mcbsp);
 	}
 
-	spin_lock(&mcbsp->lock);
-	if (mcbsp->free) {
-		dev_err(mcbsp->dev, "McBSP%d was not reserved\n",
-			mcbsp->id);
-		spin_unlock(&mcbsp->lock);
-		return;
-	}
+	reg_cache = mcbsp->reg_cache;
 
-	mcbsp->free = 1;
+	spin_lock(&mcbsp->lock);
+	if (mcbsp->free)
+		dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
+	else
+		mcbsp->free = 1;
+	mcbsp->reg_cache = NULL;
 	spin_unlock(&mcbsp->lock);
+
+	if (reg_cache)
+		kfree(reg_cache);
 }
 EXPORT_SYMBOL(omap_mcbsp_free);
 
-- 
cgit v1.2.3-70-g09d2


From d761585a0571c9d508b26735a3d268ff3ec3a548 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Mon, 15 Feb 2010 10:03:33 -0800
Subject: omap1: mailbox: kill compile warning

use ioremap and remove unused variable to get rid
of compile warnings.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/devices.c | 2 +-
 arch/arm/mach-omap1/mailbox.c | 9 +++++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index a2d07aa75c9..379100c1763 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -73,7 +73,7 @@ static inline void omap_init_rtc(void) {}
 #  define INT_DSP_MAILBOX1	INT_1610_DSP_MAILBOX1
 #endif
 
-#define OMAP1_MBOX_BASE		OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE)
+#define OMAP1_MBOX_BASE		OMAP16XX_MAILBOX_BASE
 
 static struct resource mbox_resources[] = {
 	{
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index caf889aaa24..4f5b3da3d55 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -146,7 +146,6 @@ EXPORT_SYMBOL(mbox_dsp_info);
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	int ret = 0;
 
 	if (pdev->num_resources != 2) {
 		dev_err(&pdev->dev, "invalid number of resources: %d\n",
@@ -160,12 +159,18 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = res->start;
+
+	mbox_base = ioremap(res->start, resource_size(res));
+	if (!mbox_base) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENODEV;
+	}
 
 	/* DSP IRQ */
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		iounmap(mbox_base);
 		return -ENODEV;
 	}
 	mbox_dsp_info.irq = res->start;
-- 
cgit v1.2.3-70-g09d2


From b92c170d019db7554db95380d2e1dfb3a368e350 Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Mon, 22 Feb 2010 22:09:19 -0700
Subject: OMAP clock: drop .id field; ensure each clock has a unique name

After the clkdev conversion, the struct clk.id field became
superfluous, so, drop it.  Bring the clock names closer to the TRMs
and ensure they are unique for debugfs.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap1/clock_data.c        | 10 ++--
 arch/arm/mach-omap2/clock2xxx_data.c    | 81 +++++++++++-------------------
 arch/arm/mach-omap2/clock34xx_data.c    | 88 +++++++++++----------------------
 arch/arm/plat-omap/clock.c              |  2 -
 arch/arm/plat-omap/include/plat/clock.h |  1 -
 5 files changed, 61 insertions(+), 121 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index edefb3440d3..cea91cdf624 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -530,7 +530,7 @@ static struct clk bclk_16xx = {
 };
 
 static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
+	.name		= "mmc1_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
@@ -541,8 +541,7 @@ static struct clk mmc1_ck = {
 };
 
 static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
+	.name		= "mmc2_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
@@ -553,8 +552,7 @@ static struct clk mmc2_ck = {
 };
 
 static struct clk mmc3_ck = {
-	.name		= "mmc_ck",
-	.id		= 2,
+	.name		= "mmc3_ck",
 	.ops		= &clkops_generic,
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
@@ -577,7 +575,6 @@ static struct clk virtual_ck_mpu = {
 remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armxor_ck.clk,
@@ -586,7 +583,6 @@ static struct clk i2c_fck = {
 
 static struct clk i2c_ick = {
 	.name		= "i2c_ick",
-	.id		= 1,
 	.ops		= &clkops_null,
 	.flags		= CLOCK_NO_IDLE_PARENT,
 	.parent		= &armper_ck.clk,
diff --git a/arch/arm/mach-omap2/clock2xxx_data.c b/arch/arm/mach-omap2/clock2xxx_data.c
index 9bcef44fb14..82ad8b439eb 100644
--- a/arch/arm/mach-omap2/clock2xxx_data.c
+++ b/arch/arm/mach-omap2/clock2xxx_data.c
@@ -1224,9 +1224,8 @@ static struct clk gpt12_fck = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1235,9 +1234,8 @@ static struct clk mcbsp1_ick = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1246,9 +1244,8 @@ static struct clk mcbsp1_fck = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1257,9 +1254,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1268,9 +1264,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1279,9 +1274,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1290,9 +1284,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1301,9 +1294,8 @@ static struct clk mcbsp4_ick = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1312,9 +1304,8 @@ static struct clk mcbsp4_fck = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp5_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1323,9 +1314,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1334,9 +1324,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1345,9 +1334,8 @@ static struct clk mcspi1_ick = {
 };
 
 static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &func_48m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1356,9 +1344,8 @@ static struct clk mcspi1_fck = {
 };
 
 static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1367,9 +1354,8 @@ static struct clk mcspi2_ick = {
 };
 
 static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &func_48m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1378,9 +1364,8 @@ static struct clk mcspi2_fck = {
 };
 
 static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1389,9 +1374,8 @@ static struct clk mcspi3_ick = {
 };
 
 static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &func_48m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1717,9 +1701,8 @@ static struct clk hdq_fck = {
 };
 
 static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
+	.name		= "i2c2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1728,9 +1711,8 @@ static struct clk i2c2_ick = {
 };
 
 static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2c2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &func_12m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1739,9 +1721,8 @@ static struct clk i2c2_fck = {
 };
 
 static struct clk i2chs2_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2chs2_fck",
 	.ops		= &clkops_omap2430_i2chs_wait,
-	.id		= 2,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1750,9 +1731,8 @@ static struct clk i2chs2_fck = {
 };
 
 static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
+	.name		= "i2c1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1761,9 +1741,8 @@ static struct clk i2c1_ick = {
 };
 
 static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2c1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &func_12m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1772,9 +1751,8 @@ static struct clk i2c1_fck = {
 };
 
 static struct clk i2chs1_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2chs1_fck",
 	.ops		= &clkops_omap2430_i2chs_wait,
-	.id		= 1,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
@@ -1941,7 +1919,7 @@ static struct clk usbhs_ick = {
 };
 
 static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
+	.name		= "mmchs1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -1951,7 +1929,7 @@ static struct clk mmchs1_ick = {
 };
 
 static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
+	.name		= "mmchs1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l3_clkdm",
@@ -1961,9 +1939,8 @@ static struct clk mmchs1_fck = {
 };
 
 static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
+	.name		= "mmchs2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &l4_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
@@ -1972,9 +1949,8 @@ static struct clk mmchs2_ick = {
 };
 
 static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
+	.name		= "mmchs2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &func_96m_ck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
@@ -2012,7 +1988,7 @@ static struct clk mdm_intc_ick = {
 };
 
 static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb_fck",
+	.name		= "mmchsdb1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_32k_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2022,9 +1998,8 @@ static struct clk mmchsdb1_fck = {
 };
 
 static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb_fck",
+	.name		= "mmchsdb2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &func_32k_ck,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index 94f603b16c5..995d5d4c897 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -1505,9 +1505,8 @@ static struct clk core_96m_fck = {
 };
 
 static struct clk mmchs3_fck = {
-	.name		= "mmchs_fck",
+	.name		= "mmchs3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1516,9 +1515,8 @@ static struct clk mmchs3_fck = {
 };
 
 static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
+	.name		= "mmchs2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
@@ -1537,7 +1535,7 @@ static struct clk mspro_fck = {
 };
 
 static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
+	.name		= "mmchs1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
@@ -1547,9 +1545,8 @@ static struct clk mmchs1_fck = {
 };
 
 static struct clk i2c3_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2c3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
@@ -1558,9 +1555,8 @@ static struct clk i2c3_fck = {
 };
 
 static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2c2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
@@ -1569,9 +1565,8 @@ static struct clk i2c2_fck = {
 };
 
 static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
+	.name		= "i2c1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_96m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
@@ -1600,9 +1595,8 @@ static const struct clksel mcbsp_15_clksel[] = {
 };
 
 static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -1614,9 +1608,8 @@ static struct clk mcbsp5_fck = {
 };
 
 static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -1638,9 +1631,8 @@ static struct clk core_48m_fck = {
 };
 
 static struct clk mcspi4_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
@@ -1648,9 +1640,8 @@ static struct clk mcspi4_fck = {
 };
 
 static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
@@ -1658,9 +1649,8 @@ static struct clk mcspi3_fck = {
 };
 
 static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
@@ -1668,9 +1658,8 @@ static struct clk mcspi2_fck = {
 };
 
 static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
+	.name		= "mcspi1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
@@ -1879,9 +1868,8 @@ static struct clk usbtll_ick = {
 };
 
 static struct clk mmchs3_ick = {
-	.name		= "mmchs_ick",
+	.name		= "mmchs3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
@@ -1931,9 +1919,8 @@ static struct clk des2_ick = {
 };
 
 static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
+	.name		= "mmchs2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
@@ -1942,7 +1929,7 @@ static struct clk mmchs2_ick = {
 };
 
 static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
+	.name		= "mmchs1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
@@ -1972,9 +1959,8 @@ static struct clk hdq_ick = {
 };
 
 static struct clk mcspi4_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
@@ -1983,9 +1969,8 @@ static struct clk mcspi4_ick = {
 };
 
 static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
@@ -1994,9 +1979,8 @@ static struct clk mcspi3_ick = {
 };
 
 static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
@@ -2005,9 +1989,8 @@ static struct clk mcspi2_ick = {
 };
 
 static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
+	.name		= "mcspi1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
@@ -2016,9 +1999,8 @@ static struct clk mcspi1_ick = {
 };
 
 static struct clk i2c3_ick = {
-	.name		= "i2c_ick",
+	.name		= "i2c3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
@@ -2027,9 +2009,8 @@ static struct clk i2c3_ick = {
 };
 
 static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
+	.name		= "i2c2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
@@ -2038,9 +2019,8 @@ static struct clk i2c2_ick = {
 };
 
 static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
+	.name		= "i2c1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
@@ -2089,9 +2069,8 @@ static struct clk gpt10_ick = {
 };
 
 static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp5_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
@@ -2100,9 +2079,8 @@ static struct clk mcbsp5_ick = {
 };
 
 static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp1_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
 	.parent		= &core_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
@@ -2897,9 +2875,8 @@ static struct clk gpt2_ick = {
 };
 
 static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp2_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2908,9 +2885,8 @@ static struct clk mcbsp2_ick = {
 };
 
 static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp3_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2919,9 +2895,8 @@ static struct clk mcbsp3_ick = {
 };
 
 static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
+	.name		= "mcbsp4_ick",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.parent		= &per_l4_ick,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
@@ -2936,9 +2911,8 @@ static const struct clksel mcbsp_234_clksel[] = {
 };
 
 static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
@@ -2950,9 +2924,8 @@ static struct clk mcbsp2_fck = {
 };
 
 static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
@@ -2964,9 +2937,8 @@ static struct clk mcbsp3_fck = {
 };
 
 static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
+	.name		= "mcbsp4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
 	.init		= &omap2_init_clksel_parent,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index e3b58afa5dc..f244b172f9e 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -408,8 +408,6 @@ static int clk_debugfs_register_one(struct clk *c)
 	char *p = s;
 
 	p += sprintf(p, "%s", c->name);
-	if (c->id != 0)
-		sprintf(p, ":%d", c->id);
 	d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
 	if (!d)
 		return -ENOMEM;
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 474c21e40ea..bbaba1b64a8 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -120,7 +120,6 @@ struct clk {
 	struct list_head	node;
 	const struct clkops	*ops;
 	const char		*name;
-	int			id;
 	struct clk		*parent;
 	struct list_head	children;
 	struct list_head	sibling;	/* node for children */
-- 
cgit v1.2.3-70-g09d2


From 51c19541624f5588bccb9d4fb3ae518c68c8082e Mon Sep 17 00:00:00 2001
From: Paul Walmsley <paul@pwsan.com>
Date: Mon, 22 Feb 2010 22:09:26 -0700
Subject: OMAP clock: drop RATE_FIXED clock flag

The RATE_FIXED clock flag is pointless.  In the OMAP1 clock code, it
simply causes the omap1_clk_round_rate() function to return the
current rate of the clock.  omap1_clk_round_rate(), however, should
never be called for a fixed-rate clock, since none of these clocks
have a .round_rate function pointer set in their struct clk records.
Similarly, in the OMAP2+ clock code, the RATE_FIXED flag just causes
the clock code to emit a warning if the OMAP clock maintainer was
foolish enough to add a .round_rate function pointer to a fixed-rate
clock.  "Doctor, it hurts when I pretend that a fixed-rate clock is
rate-changeable."  "Then don't pretend that a fixed-rate clock is
rate-changeable."  It has no functional value.  This patch drops the
RATE_FIXED clock flag, removing it from all clocks that are so marked.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
---
 arch/arm/mach-omap1/clock.c             |  5 +----
 arch/arm/mach-omap1/clock_data.c        | 25 +++++++++----------------
 arch/arm/mach-omap2/clkt_clksel.c       |  4 ----
 arch/arm/mach-omap2/clock2420_data.c    |  7 ++-----
 arch/arm/mach-omap2/clock2430_data.c    |  7 ++-----
 arch/arm/mach-omap2/clock3xxx_data.c    | 11 -----------
 arch/arm/plat-omap/include/plat/clock.h | 13 ++++++-------
 7 files changed, 20 insertions(+), 52 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 3e052f6532b..0ba044d80a4 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified to use omap shared clock framework by
@@ -571,9 +571,6 @@ const struct clkops clkops_uart = {
 
 long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
-
 	if (clk->round_rate != NULL)
 		return clk->round_rate(clk, rate);
 
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cea91cdf624..8b1d14d1e38 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock_data.c
  *
- *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -31,7 +31,6 @@
 static struct clk dummy_ck = {
 	.name	= "dummy",
 	.ops	= &clkops_dummy,
-	.flags	= RATE_FIXED,
 };
 
 static struct clk ck_ref = {
@@ -389,8 +388,7 @@ static struct uart_clk uart1_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 29,
 	},
@@ -430,8 +428,7 @@ static struct uart_clk uart3_16xx = {
 		/* Direct from ULPD, no real parent */
 		.parent		= &armper_ck.clk,
 		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 		.enable_bit	= 31,
 	},
@@ -443,7 +440,7 @@ static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
 	.enable_bit	= USB_MCLK_EN_BIT,
 };
@@ -453,7 +450,7 @@ static struct clk usb_hhc_ck1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= USB_HOST_HHC_UHOST_EN,
 };
@@ -464,7 +461,7 @@ static struct clk usb_hhc_ck16xx = {
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
 	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= ENABLE_REG_32BIT,
 	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
 	.enable_bit	= 8 /* UHOST_EN */,
 };
@@ -474,7 +471,6 @@ static struct clk usb_dc_ck = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 4,
 };
@@ -484,7 +480,6 @@ static struct clk usb_dc_ck7xx = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 8,
 };
@@ -494,7 +489,6 @@ static struct clk mclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 6,
 };
@@ -515,7 +509,6 @@ static struct clk bclk_1510 = {
 	.ops		= &clkops_generic,
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk bclk_16xx = {
@@ -535,7 +528,7 @@ static struct clk mmc1_ck = {
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 23,
 };
@@ -546,7 +539,7 @@ static struct clk mmc2_ck = {
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
 	.enable_bit	= 20,
 };
@@ -557,7 +550,7 @@ static struct clk mmc3_ck = {
 	/* Functional clock is direct from ULPD, interface clock is ARMPER */
 	.parent		= &armper_ck.clk,
 	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
 	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
 	.enable_bit	= 12,
 };
diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c
index ade19f6369d..e50812dd03f 100644
--- a/arch/arm/mach-omap2/clkt_clksel.c
+++ b/arch/arm/mach-omap2/clkt_clksel.c
@@ -258,10 +258,6 @@ long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk->round_rate)
 		return clk->round_rate(clk, rate);
 
-	if (clk->flags & RATE_FIXED)
-		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
-		       "on fixed-rate clock %s\n", clk->name);
-
 	return clk->rate;
 }
 
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index d5913f01e5d..f12af95ead4 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -55,7 +55,6 @@ static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32000,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -63,7 +62,6 @@ static struct clk secure_32k_ck = {
 	.name		= "secure_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -88,7 +86,6 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
 	.ops		= &clkops_null,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -134,7 +131,7 @@ static struct clk apll96_ck = {
 	.ops		= &clkops_apll96,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
@@ -145,7 +142,7 @@ static struct clk apll54_ck = {
 	.ops		= &clkops_apll54,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index b3895840dc4..0438b6e4f51 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -55,7 +55,6 @@ static struct clk func_32k_ck = {
 	.name		= "func_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32000,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -63,7 +62,6 @@ static struct clk secure_32k_ck = {
 	.name		= "secure_32k_ck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -88,7 +86,6 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.name		= "alt_ck",
 	.ops		= &clkops_null,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED,
 	.clkdm_name	= "wkup_clkdm",
 };
 
@@ -134,7 +131,7 @@ static struct clk apll96_ck = {
 	.ops		= &clkops_apll96,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
@@ -145,7 +142,7 @@ static struct clk apll54_ck = {
 	.ops		= &clkops_apll54,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
-	.flags		= RATE_FIXED | ENABLE_ON_INIT,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "wkup_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
 	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index f2379029700..fd832300be3 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -64,14 +64,12 @@ static struct clk omap_32k_fck = {
 	.name		= "omap_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk secure_32k_fck = {
 	.name		= "secure_32k_fck",
 	.ops		= &clkops_null,
 	.rate		= 32768,
-	.flags		= RATE_FIXED,
 };
 
 /* Virtual source clocks for osc_sys_ck */
@@ -79,42 +77,36 @@ static struct clk virt_12m_ck = {
 	.name		= "virt_12m_ck",
 	.ops		= &clkops_null,
 	.rate		= 12000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_13m_ck = {
 	.name		= "virt_13m_ck",
 	.ops		= &clkops_null,
 	.rate		= 13000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_16_8m_ck = {
 	.name		= "virt_16_8m_ck",
 	.ops		= &clkops_null,
 	.rate		= 16800000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_19_2m_ck = {
 	.name		= "virt_19_2m_ck",
 	.ops		= &clkops_null,
 	.rate		= 19200000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_26m_ck = {
 	.name		= "virt_26m_ck",
 	.ops		= &clkops_null,
 	.rate		= 26000000,
-	.flags		= RATE_FIXED,
 };
 
 static struct clk virt_38_4m_ck = {
 	.name		= "virt_38_4m_ck",
 	.ops		= &clkops_null,
 	.rate		= 38400000,
-	.flags		= RATE_FIXED,
 };
 
 static const struct clksel_rate osc_sys_12m_rates[] = {
@@ -167,7 +159,6 @@ static struct clk osc_sys_ck = {
 	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
 	.clksel		= osc_sys_clksel,
 	/* REVISIT: deal with autoextclkmode? */
-	.flags		= RATE_FIXED,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -3168,7 +3159,6 @@ static struct clk emac_ick = {
 static struct clk rmii_ck = {
 	.name		= "rmii_ck",
 	.ops		= &clkops_null,
-	.flags		= RATE_FIXED,
 	.rate		= 50000000,
 };
 
@@ -3224,7 +3214,6 @@ static struct clk vpfe_ick = {
 static struct clk pclk_ck = {
 	.name		= "pclk_ck",
 	.ops		= &clkops_null,
-	.flags		= RATE_FIXED,
 	.rate		= 27000000,
 };
 
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 91aa2c48cdd..47de911b0a1 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -186,13 +186,12 @@ extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 extern const struct clkops clkops_null;
 
 /* Clock flags */
-#define RATE_FIXED		(1 << 0)	/* Fixed clock rate */
-#define ENABLE_REG_32BIT	(1 << 1)	/* Use 32-bit access */
-#define CLOCK_IDLE_CONTROL	(1 << 2)
-#define CLOCK_NO_IDLE_PARENT	(1 << 3)
-#define ENABLE_ON_INIT		(1 << 4)	/* Enable upon framework init */
-#define INVERT_ENABLE		(1 << 5)	/* 0 enables, 1 disables */
-#define ALWAYS_ENABLED		(1 << 6)
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define ALWAYS_ENABLED		(1 << 5)
 
 /* Clksel_rate flags */
 #define DEFAULT_RATE		(1 << 0)
-- 
cgit v1.2.3-70-g09d2


From 7c43d5472878db90d0244551370f6f0dc1b97747 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 22 Feb 2010 22:09:40 -0700
Subject: OMAP4: clock: Add dummy clock nodes for interface clocks

On OMAP4 platform the iclk control is completly under hardware control
and no software control is available.

This difference w.r.t previous OMAP's needs all the common driver
accross OMAP's , cpu_is_xxxx() checks. To avoid poulluting the
drivers dummy clock nodes are created (The autogeneration
script has been updated accordingly).

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
[paul@pwsan.com: made OMAP1 dummy_ck common and edited patch to reuse that]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap1/clock.c             | 14 -------------
 arch/arm/mach-omap1/clock_data.c        |  6 ------
 arch/arm/mach-omap2/clock.h             |  1 +
 arch/arm/mach-omap2/clock44xx_data.c    | 35 +++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/clock.c              | 10 ++++++++++
 arch/arm/plat-omap/include/plat/clock.h |  2 ++
 6 files changed, 48 insertions(+), 20 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 0ba044d80a4..e0aec1007a0 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -38,20 +38,6 @@ struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
  * Omap1 specific clock functions
  *-------------------------------------------------------------------------*/
 
-static int clk_omap1_dummy_enable(struct clk *clk)
-{
-	return 0;
-}
-
-static void clk_omap1_dummy_disable(struct clk *clk)
-{
-}
-
-const struct clkops clkops_dummy = {
-	.enable		= clk_omap1_dummy_enable,
-	.disable	= clk_omap1_dummy_disable,
-};
-
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 8b1d14d1e38..aa8558adbf1 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -27,12 +27,6 @@
  * Omap1 clocks
  *-------------------------------------------------------------------------*/
 
-/* XXX is this necessary? */
-static struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_dummy,
-};
-
 static struct clk ck_ref = {
 	.name		= "ck_ref",
 	.ops		= &clkops_null,
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index f77d8af585a..ad8a1f7c1af 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -127,6 +127,7 @@ void omap2_clk_print_new_rates(const char *hfclkin_ck_name,
 extern u8 cpu_mask;
 
 extern const struct clkops clkops_omap2_dflt_wait;
+extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index c0825cffdbb..28b107967c8 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -2645,6 +2645,41 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk_ck",		&utmi_p1_gfclk_ck,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk_ck",		&utmi_p2_gfclk_ck,	CK_443X),
+	CLK(NULL,	"gpio1_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio2_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio3_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio4_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio5_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpio6_dbck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpmc_ck",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt1_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt2_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt3_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt4_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt5_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt6_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt7_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt8_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
+	CLK("i2c_omap.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("i2c_omap.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcbsp.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcspi.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcspi.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcspi.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap-mcspi.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart1_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
+	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
+	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 6cc13e7fd89..5261a092369 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -357,6 +357,16 @@ const struct clkops clkops_null = {
 	.disable	= clkll_disable_null,
 };
 
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_null,
+};
+
 #ifdef CONFIG_CPU_FREQ
 void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 9b4701f1498..34f7fa9ad4c 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -186,6 +186,8 @@ extern struct clk *omap_clk_get_by_name(const char *name);
 
 extern const struct clkops clkops_null;
 
+extern struct clk dummy_ck;
+
 /* Clock flags */
 #define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
 #define CLOCK_IDLE_CONTROL	(1 << 1)
-- 
cgit v1.2.3-70-g09d2


From 9833eff3d7db76d2d04f28567ed8704d69e225ae Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Mon, 22 Feb 2010 20:29:36 +0000
Subject: omap: i2c: Fix muxing for command line enabled bus

The commit b63128e81214cc2db2995d690438055c26d213a5 broke the pin muxing
for I2C busses that are enabled from the kernel command line.

Fix this by defining the board registration function omap_register_i2c_bus
in common platform code as it was before but keep the muxing in architecture
dependent files.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap1/i2c.c             |  6 +-----
 arch/arm/mach-omap2/i2c.c             |  6 +-----
 arch/arm/plat-omap/i2c.c              | 10 ++++++++--
 arch/arm/plat-omap/include/plat/i2c.h |  5 ++---
 4 files changed, 12 insertions(+), 15 deletions(-)

(limited to 'arch/arm/mach-omap1')

diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
index 1bf4735e27a..5446c991264 100644
--- a/arch/arm/mach-omap1/i2c.c
+++ b/arch/arm/mach-omap1/i2c.c
@@ -23,9 +23,7 @@
 #include <plat/mux.h>
 #include <plat/cpu.h>
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap1_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap7xx()) {
 		omap_cfg_reg(I2C_7XX_SDA);
@@ -34,6 +32,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		omap_cfg_reg(I2C_SDA);
 		omap_cfg_reg(I2C_SCL);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
index 789ca8c02f0..7951ae1447e 100644
--- a/arch/arm/mach-omap2/i2c.c
+++ b/arch/arm/mach-omap2/i2c.c
@@ -25,9 +25,7 @@
 
 #include "mux.h"
 
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
-			  struct i2c_board_info const *info,
-			  unsigned len)
+void __init omap2_i2c_mux_pins(int bus_id)
 {
 	if (cpu_is_omap24xx()) {
 		const int omap24xx_pins[][2] = {
@@ -51,6 +49,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
 		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
 	}
-
-	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
 }
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 96d2781ac4f..624e26298fa 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <mach/irqs.h>
 #include <plat/mux.h>
+#include <plat/i2c.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -117,6 +118,11 @@ static int __init omap_i2c_add_bus(int bus_id)
 		res[1].start = irq;
 	}
 
+	if (cpu_class_is_omap1())
+		omap1_i2c_mux_pins(bus_id);
+	if (cpu_class_is_omap2())
+		omap2_i2c_mux_pins(bus_id);
+
 	return platform_device_register(pdev);
 }
 
@@ -169,7 +175,7 @@ out:
 subsys_initcall(omap_register_i2c_bus_cmdline);
 
 /**
- * omap_plat_register_i2c_bus - register I2C bus with device descriptors
+ * omap_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
  * @clkrate: clock rate of the bus in kHz
  * @info: pointer into I2C device descriptor table or NULL
@@ -177,7 +183,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
  *
  * Returns 0 on success or an error code.
  */
-int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 585d9ca68b9..87f6bf2ea4f 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -34,6 +34,5 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
-int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
+void __init omap1_i2c_mux_pins(int bus_id);
+void __init omap2_i2c_mux_pins(int bus_id);
-- 
cgit v1.2.3-70-g09d2