From d04b620e6e6e72a95b7b88ccb7b002cb8f6b8113 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 21 Sep 2010 16:03:09 +0000 Subject: omap3: Introduce CompuLab CM-T3517 module Add basic suppot, enable uart and led. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 109 +++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 arch/arm/mach-omap2/board-cm-t3517.c (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c new file mode 100644 index 00000000000..507d2d51078 --- /dev/null +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -0,0 +1,109 @@ +/* + * linux/arch/arm/mach-omap2/board-cm-t3517.c + * + * Support for the CompuLab CM-T3517 modules + * + * Copyright (C) 2010 CompuLab, Ltd. + * Author: Igor Grinberg + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include "mux.h" + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +static struct gpio_led cm_t3517_leds[] = { + [0] = { + .gpio = 186, + .name = "cm-t3517:green", + .default_trigger = "heartbeat", + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data cm_t3517_led_pdata = { + .num_leds = ARRAY_SIZE(cm_t3517_leds), + .leds = cm_t3517_leds, +}; + +static struct platform_device cm_t3517_led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &cm_t3517_led_pdata, + }, +}; + +static void __init cm_t3517_init_leds(void) +{ + platform_device_register(&cm_t3517_led_device); +} +#else +static inline void cm_t3517_init_leds(void) {} +#endif + + +static struct omap_board_config_kernel cm_t3517_config[] __initdata = { +}; + +static void __init cm_t3517_init_irq(void) +{ + omap_board_config = cm_t3517_config; + omap_board_config_size = ARRAY_SIZE(cm_t3517_config); + + omap2_init_common_hw(NULL, NULL); + omap_init_irq(); + omap_gpio_init(); +} + +static struct omap_board_mux board_mux[] __initdata = { + /* GPIO186 - Green LED */ + OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +static void __init cm_t3517_init(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); + cm_t3517_init_leds(); +} + +MACHINE_START(CM_T3517, "Compulab CM-T3517") + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_map_io, + .reserve = omap_reserve, + .init_irq = cm_t3517_init_irq, + .init_machine = cm_t3517_init, + .timer = &omap_timer, +MACHINE_END -- cgit v1.2.3-70-g09d2 From 46893a56aad011764003703b06303515ea670c57 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 21 Sep 2010 16:03:10 +0000 Subject: omap3: cm-t3517: add support for v3020 rtc add support for v3020 rtc. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 507d2d51078..2b41c6de274 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -69,6 +70,35 @@ static void __init cm_t3517_init_leds(void) static inline void cm_t3517_init_leds(void) {} #endif +#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) +#define RTC_IO_GPIO (153) +#define RTC_WR_GPIO (154) +#define RTC_RD_GPIO (160) +#define RTC_CS_GPIO (163) + +struct v3020_platform_data cm_t3517_v3020_pdata = { + .use_gpio = 1, + .gpio_cs = RTC_CS_GPIO, + .gpio_wr = RTC_WR_GPIO, + .gpio_rd = RTC_RD_GPIO, + .gpio_io = RTC_IO_GPIO, +}; + +static struct platform_device cm_t3517_rtc_device = { + .name = "v3020", + .id = -1, + .dev = { + .platform_data = &cm_t3517_v3020_pdata, + } +}; + +static void __init cm_t3517_init_rtc(void) +{ + platform_device_register(&cm_t3517_rtc_device); +} +#else +static inline void cm_t3517_init_rtc(void) {} +#endif static struct omap_board_config_kernel cm_t3517_config[] __initdata = { }; @@ -86,6 +116,11 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* RTC GPIOs: IO, WR#, RD#, CS# */ + OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -95,6 +130,7 @@ static void __init cm_t3517_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); cm_t3517_init_leds(); + cm_t3517_init_rtc(); } MACHINE_START(CM_T3517, "Compulab CM-T3517") -- cgit v1.2.3-70-g09d2 From 525d75b31bc97354870b5991d57b2607d7b88602 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 21 Sep 2010 16:03:11 +0000 Subject: omap3: cm-t3517: add support for usb host add support for hsusb host ports 1, 2 and on-module usb hub. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 50 ++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 2b41c6de274..2c7082d6d77 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -36,6 +37,7 @@ #include #include #include +#include #include "mux.h" @@ -100,6 +102,47 @@ static void __init cm_t3517_init_rtc(void) static inline void cm_t3517_init_rtc(void) {} #endif +#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +#define HSUSB1_RESET_GPIO (146) +#define HSUSB2_RESET_GPIO (147) +#define USB_HUB_RESET_GPIO (152) + +static struct ehci_hcd_omap_platform_data cm_t3517_ehci_pdata __initdata = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = HSUSB1_RESET_GPIO, + .reset_gpio_port[1] = HSUSB2_RESET_GPIO, + .reset_gpio_port[2] = -EINVAL, +}; + +static int cm_t3517_init_usbh(void) +{ + int err; + + err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + if (err) { + pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); + } else { + gpio_direction_output(USB_HUB_RESET_GPIO, 0); + udelay(10); + gpio_set_value(USB_HUB_RESET_GPIO, 1); + msleep(1); + } + + usb_ehci_init(&cm_t3517_ehci_pdata); + + return 0; +} +#else +static inline int cm_t3517_init_usbh(void) +{ + return 0; +} +#endif + static struct omap_board_config_kernel cm_t3517_config[] __initdata = { }; @@ -121,6 +164,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ + OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* HSUSB2 RESET */ + OMAP3_MUX(UART2_RX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), + /* CM-T3517 USB HUB nRESET */ + OMAP3_MUX(MCBSP4_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; @@ -131,6 +180,7 @@ static void __init cm_t3517_init(void) omap_serial_init(); cm_t3517_init_leds(); cm_t3517_init_rtc(); + cm_t3517_init_usbh(); } MACHINE_START(CM_T3517, "Compulab CM-T3517") -- cgit v1.2.3-70-g09d2 From ec34fccd3a8ed4997c38797b49e37535ad387401 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 21 Sep 2010 16:03:12 +0000 Subject: omap3: cm-t3517: add support for NAND flash add support for NAND flash. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 2c7082d6d77..4c26cf53a6e 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -29,6 +29,9 @@ #include #include #include +#include +#include +#include #include #include @@ -38,6 +41,8 @@ #include #include #include +#include +#include #include "mux.h" @@ -143,6 +148,54 @@ static inline int cm_t3517_init_usbh(void) } #endif +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition cm_t3517_nand_partitions[] = { + { + .name = "xloader", + .offset = 0, /* Offset = 0x00000 */ + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + }, + { + .name = "uboot environment", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 2 * NAND_BLOCK_SIZE, + }, + { + .name = "linux", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data cm_t3517_nand_data = { + .parts = cm_t3517_nand_partitions, + .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .cs = 0, +}; + +static void __init cm_t3517_init_nand(void) +{ + if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + pr_err("CM-T3517: NAND initialization failed\n"); +} +#else +static inline void cm_t3517_init_nand(void) {} +#endif + static struct omap_board_config_kernel cm_t3517_config[] __initdata = { }; @@ -179,6 +232,7 @@ static void __init cm_t3517_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); cm_t3517_init_leds(); + cm_t3517_init_nand(); cm_t3517_init_rtc(); cm_t3517_init_usbh(); } -- cgit v1.2.3-70-g09d2 From b6a26b4b87d7b030a546e7bdaf390ffc58323f36 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 21 Sep 2010 16:03:13 +0000 Subject: omap3: cm-t3517: add support for TI HECC add support for TI HECC. Signed-off-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 45 ++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 4c26cf53a6e..1115b8ab5e1 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -44,6 +45,8 @@ #include #include +#include + #include "mux.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) @@ -77,6 +80,47 @@ static void __init cm_t3517_init_leds(void) static inline void cm_t3517_init_leds(void) {} #endif +#if defined(CONFIG_CAN_TI_HECC) || defined(CONFIG_CAN_TI_HECC_MODULE) +static struct resource cm_t3517_hecc_resources[] = { + { + .start = AM35XX_IPSS_HECC_BASE, + .end = AM35XX_IPSS_HECC_BASE + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_35XX_HECC0_IRQ, + .end = INT_35XX_HECC0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ti_hecc_platform_data cm_t3517_hecc_pdata = { + .scc_hecc_offset = AM35XX_HECC_SCC_HECC_OFFSET, + .scc_ram_offset = AM35XX_HECC_SCC_RAM_OFFSET, + .hecc_ram_offset = AM35XX_HECC_RAM_OFFSET, + .mbx_offset = AM35XX_HECC_MBOX_OFFSET, + .int_line = AM35XX_HECC_INT_LINE, + .version = AM35XX_HECC_VERSION, +}; + +static struct platform_device cm_t3517_hecc_device = { + .name = "ti_hecc", + .id = 1, + .num_resources = ARRAY_SIZE(cm_t3517_hecc_resources), + .resource = cm_t3517_hecc_resources, + .dev = { + .platform_data = &cm_t3517_hecc_pdata, + }, +}; + +static void cm_t3517_init_hecc(void) +{ + platform_device_register(&cm_t3517_hecc_device); +} +#else +static inline void cm_t3517_init_hecc(void) {} +#endif + #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) @@ -235,6 +279,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_nand(); cm_t3517_init_rtc(); cm_t3517_init_usbh(); + cm_t3517_init_hecc(); } MACHINE_START(CM_T3517, "Compulab CM-T3517") -- cgit v1.2.3-70-g09d2 From 4814ced5116e3b73dc4f63eec84999739fc8ed11 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Fri, 8 Oct 2010 11:40:20 -0600 Subject: OMAP: control: move plat-omap/control.h to mach-omap2/control.h Only OMAP2+ platforms have the System Control Module (SCM) IP block. In the past, we've kept the SCM header file in plat-omap. This has led to abuse - device drivers including it; includes being added that create implicit dependencies on OMAP2+ builds; etc. In response, move the SCM headers into mach-omap2/. As part of this, remove the direct SCM access from the OMAP UDC driver. It was clearly broken. The UDC code needs an indepth review for use on OMAP2+ chips. Signed-off-by: Paul Walmsley Cc: Cory Maccarrone Cc: Kyungmin Park --- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-am3517evm.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-cm-t3517.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3logic.c | 2 +- arch/arm/mach-omap2/board-omap4panda.c | 4 +- arch/arm/mach-omap2/clock2420_data.c | 2 +- arch/arm/mach-omap2/clock2430_data.c | 2 +- arch/arm/mach-omap2/clock3xxx_data.c | 2 +- arch/arm/mach-omap2/clock44xx_data.c | 2 +- arch/arm/mach-omap2/common.c | 2 +- arch/arm/mach-omap2/control.c | 3 +- arch/arm/mach-omap2/control.h | 368 ++++++++++++++++++++++++++ arch/arm/mach-omap2/cpuidle34xx.c | 2 +- arch/arm/mach-omap2/devices.c | 3 +- arch/arm/mach-omap2/hsmmc.c | 2 +- arch/arm/mach-omap2/id.c | 3 +- arch/arm/mach-omap2/mcbsp.c | 4 +- arch/arm/mach-omap2/mux.c | 8 +- arch/arm/mach-omap2/pm24xx.c | 2 +- arch/arm/mach-omap2/pm34xx.c | 2 +- arch/arm/mach-omap2/prcm.c | 2 +- arch/arm/mach-omap2/serial.c | 2 +- arch/arm/mach-omap2/sleep34xx.S | 2 +- arch/arm/mach-omap2/usb-fs.c | 6 +- arch/arm/plat-omap/include/plat/control.h | 368 -------------------------- arch/arm/plat-omap/include/plat/omap-serial.h | 1 - arch/arm/plat-omap/mcbsp.c | 1 - drivers/usb/gadget/omap_udc.c | 18 +- 32 files changed, 408 insertions(+), 419 deletions(-) create mode 100644 arch/arm/mach-omap2/control.h delete mode 100644 arch/arm/plat-omap/include/plat/control.h (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 9ba2ee246a7..88b5734d0bb 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -39,7 +39,6 @@ #include #include -#include #include #include "board-flash.h" @@ -47,6 +46,7 @@ #include "sdram-qimonda-hyb18m512160af-6.h" #include "hsmmc.h" #include "pm.h" +#include "control.h" #define CONFIG_DISABLE_HFCLK 1 diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 1d7d70ae7cb..aafd30680fc 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -32,12 +32,12 @@ #include #include -#include #include #include #include "hsmmc.h" #include "timer-gp.h" +#include "control.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index b091741500d..fada04ea1d5 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -32,11 +32,11 @@ #include #include -#include #include #include #include "mux.h" +#include "control.h" #define AM35XX_EVM_PHY_MASK (0xF) #define AM35XX_EVM_MDIO_FREQUENCY (1000000) diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index c6421a72514..102719cb052 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -39,9 +39,9 @@ #include #include #include -#include #include "mux.h" +#include "control.h" /* LED & Switch macros */ #define LED0_GPIO13 13 diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 1115b8ab5e1..c49319ff5c3 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -40,7 +40,6 @@ #include #include -#include #include #include #include @@ -48,6 +47,7 @@ #include #include "mux.h" +#include "control.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index e09bd686389..08492a34d31 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -31,7 +31,6 @@ #include #include -#include #include #include #include @@ -42,6 +41,7 @@ #include #include "mux.h" +#include "control.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 7c1e6ad3972..8495f37d275 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -42,12 +42,12 @@ #include #include -#include #include #include "board-flash.h" #include "mux.h" #include "hsmmc.h" +#include "control.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 3151cf269a5..44ff6744ef5 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -36,6 +36,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "control.h" #include #include @@ -43,7 +44,6 @@ #include #include #include -#include #define OMAP3LOGIC_SMSC911X_CS 1 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 83bd1fe5e32..992a03e248c 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -34,12 +34,12 @@ #include #include -#include #include #include -#include "hsmmc.h" #include "timer-gp.h" +#include "hsmmc.h" +#include "control.h" static struct gpio_led gpio_leds[] = { { diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 7086fe4fb7a..21f856252ad 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -18,7 +18,6 @@ #include #include -#include #include "clock.h" #include "clock2xxx.h" @@ -28,6 +27,7 @@ #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "control.h" #define OMAP_CM_REGADDR OMAP2420_CM_REGADDR diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 454831966d3..e32afcbdfb8 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -18,7 +18,6 @@ #include #include -#include #include "clock.h" #include "clock2xxx.h" @@ -28,6 +27,7 @@ #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" +#include "control.h" #define OMAP_CM_REGADDR OMAP2430_CM_REGADDR diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4ac1fb8c001..d85ecd5aebf 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -20,7 +20,6 @@ #include #include -#include #include #include "clock.h" @@ -33,6 +32,7 @@ #include "cm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-34xx.h" +#include "control.h" /* * clocks diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 67fac44cb6e..1599836ba3d 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include "clock.h" @@ -35,6 +34,7 @@ #include "cm-regbits-44xx.h" #include "prm.h" #include "prm-regbits-44xx.h" +#include "control.h" /* Root clocks */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index cddc89ab747..778929f7e92 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -19,12 +19,12 @@ #include #include -#include #include #include #include "sdrc.h" +#include "control.h" /* Global address base setup code */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 5d9b30dd6e5..1fa3294b604 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -16,14 +16,15 @@ #include #include -#include #include + #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "prm.h" #include "sdrc.h" #include "pm.h" +#include "control.h" static void __iomem *omap2_ctrl_base; static void __iomem *omap4_ctrl_pad_base; diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h new file mode 100644 index 00000000000..b6c6b7c450b --- /dev/null +++ b/arch/arm/mach-omap2/control.h @@ -0,0 +1,368 @@ +/* + * arch/arm/mach-omap2/control.h + * + * OMAP2/3/4 System Control Module definitions + * + * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2008, 2010 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H +#define __ARCH_ARM_MACH_OMAP2_CONTROL_H + +#include +#include +#include +#include +#include + +#ifndef __ASSEMBLY__ +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#else +#define OMAP242X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) +#endif /* __ASSEMBLY__ */ + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) +#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ + + ((i) >> 1) * 4 + (!((i) & 1)) * 2) +#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) +#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) +#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) +#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4) +#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8) +#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC) +#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0) +#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4) +#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8) +#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0) +#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4) + +/* AM35XX only CONTROL_GENERAL register offsets */ +#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038) +#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310) +#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314) +#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320) +#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324) +#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328) +#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C) + +/* 34xx PADCONF register offsets */ +#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \ + (i)*2) +#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0) +#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1) +#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2) +#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3) +#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4) +#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5) +#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6) +#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7) +#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8) +#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9) +#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10) +#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11) +#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12) +#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13) +#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14) +#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15) +#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) +#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) + +/* 34xx GENERAL_WKUP regist offsets */ +#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ + 0x008 + (i)) +#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) +#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C) +#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010) +#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) +#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) + +/* 34xx D2D idle-related pins, handled by PM core */ +#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 +#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_FSR_MASK (1 << 4) +#define OMAP2_MCBSP1_CLKR_MASK (1 << 3) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) +#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +/* CONTROL_PBIAS_LITE bits */ +#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) +#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) +#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) +#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) +#define OMAP343X_PBIASLITEVMODE1 (1 << 8) +#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) +#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) +#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) +#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) +#define OMAP2_PBIASLITEVMODE0 (1 << 0) + +/* CONTROL_PROG_IO1 bits */ +#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) + +/* CONTROL_IVA2_BOOTMOD bits */ +#define OMAP3_IVA2_BOOTMOD_SHIFT 0 +#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) +#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) + +/* CONTROL_PADCONF_X bits */ +#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) +#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) + +#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860) +#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) +#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C + +/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ +#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 +#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 +#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 +#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 +#define AM35XX_USBOTG_FCLK_SHIFT 8 +#define AM35XX_CPGMAC_FCLK_SHIFT 9 +#define AM35XX_VPFE_FCLK_SHIFT 10 + +/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ +#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) +#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) +#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) +#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3) +#define AM35XX_USBOTGSS_INT_CLR BIT(4) +#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5) +#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) +#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) + +/*AM35XX CONTROL_IP_SW_RESET bits*/ +#define AM35XX_USBOTGSS_SW_RST BIT(0) +#define AM35XX_CPGMACSS_SW_RST BIT(1) +#define AM35XX_VPFE_VBUSP_SW_RST BIT(2) +#define AM35XX_HECC_SW_RST BIT(3) +#define AM35XX_VPFE_PCLK_SW_RST BIT(4) + +/* + * CONTROL OMAP STATUS register to identify OMAP3 features + */ +#define OMAP3_CONTROL_OMAP_STATUS 0x044c + +#define OMAP3_SGX_SHIFT 13 +#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT) +#define FEAT_SGX_FULL 0 +#define FEAT_SGX_HALF 1 +#define FEAT_SGX_NONE 2 + +#define OMAP3_IVA_SHIFT 12 +#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT) +#define FEAT_IVA 0 +#define FEAT_IVA_NONE 1 + +#define OMAP3_L2CACHE_SHIFT 10 +#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT) +#define FEAT_L2CACHE_NONE 0 +#define FEAT_L2CACHE_64KB 1 +#define FEAT_L2CACHE_128KB 2 +#define FEAT_L2CACHE_256KB 3 + +#define OMAP3_ISP_SHIFT 5 +#define OMAP3_ISP_MASK (1 << OMAP3_ISP_SHIFT) +#define FEAT_ISP 0 +#define FEAT_ISP_NONE 1 + +#define OMAP3_NEON_SHIFT 4 +#define OMAP3_NEON_MASK (1 << OMAP3_NEON_SHIFT) +#define FEAT_NEON 0 +#define FEAT_NEON_NONE 1 + + +#ifndef __ASSEMBLY__ +#ifdef CONFIG_ARCH_OMAP2PLUS +extern void __iomem *omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern u32 omap4_ctrl_pad_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +extern void omap4_ctrl_pad_writel(u32 val, u16 offset); + +extern void omap3_save_scratchpad_contents(void); +extern void omap3_clear_scratchpad_contents(void); +extern u32 *get_restore_pointer(void); +extern u32 *get_es3_restore_pointer(void); +extern u32 omap3_arm_context[128]; +extern void omap3_control_save_context(void); +extern void omap3_control_restore_context(void); + +#else +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap4_ctrl_pad_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#define omap4_ctrl_pad_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */ + diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 703b5ec88e9..0d50b45d041 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -29,10 +29,10 @@ #include #include #include -#include #include #include "pm.h" +#include "control.h" #ifdef CONFIG_CPU_IDLE diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 818452ac905..eaf37994403 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -9,7 +9,6 @@ * (at your option) any later version. */ -#include #include #include #include @@ -23,7 +22,6 @@ #include #include -#include #include #include #include @@ -33,6 +31,7 @@ #include #include "mux.h" +#include "control.h" #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index ab78a5a8d9b..34272e4863f 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,11 +14,11 @@ #include #include #include -#include #include #include #include "hsmmc.h" +#include "control.h" #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 04a2fa240bc..5f9086c65e4 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -22,11 +22,12 @@ #include #include -#include #include #include +#include "control.h" + static struct omap_chip_id omap_chip; static unsigned int omap_revision; diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 51abcedfde8..eba9fa14a9d 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -22,7 +22,9 @@ #include #include #include -#include + +#include "control.h" + /* McBSP internal signal muxing functions */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index e33740c091b..074536ae401 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -23,12 +23,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ -#include +#include #include #include -#include -#include #include +#include #include #include #include @@ -36,8 +35,7 @@ #include -#include - +#include "control.h" #include "mux.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index f5c7ef95594..a40457d8192 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include @@ -48,6 +47,7 @@ #include "cm-regbits-24xx.h" #include "sdrc.h" #include "pm.h" +#include "control.h" #include #include diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e57c9aeeefe..8c8f1acd352 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -48,6 +47,7 @@ #include "prm.h" #include "pm.h" #include "sdrc.h" +#include "control.h" /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0x31 diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index a48a1e24f42..a51846e3a6f 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "clock.h" #include "clock2xxx.h" @@ -34,6 +33,7 @@ #include "prm.h" #include "prm-regbits-24xx.h" #include "prm-regbits-44xx.h" +#include "control.h" static void __iomem *prm_base; static void __iomem *cm_base; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0bcc9df0c03..338e46a844a 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -44,6 +43,7 @@ #include "pm.h" #include "cm.h" #include "prm-regbits-34xx.h" +#include "control.h" #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index ba53191ae4c..2fb205a7f28 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -27,11 +27,11 @@ #include #include #include -#include #include "cm.h" #include "prm.h" #include "sdrc.h" +#include "control.h" #define SDRC_SCRATCHPAD_SEM_V 0xfa00291c diff --git a/arch/arm/mach-omap2/usb-fs.c b/arch/arm/mach-omap2/usb-fs.c index a216d88b04b..1481078763b 100644 --- a/arch/arm/mach-omap2/usb-fs.c +++ b/arch/arm/mach-omap2/usb-fs.c @@ -29,18 +29,18 @@ #include -#include #include #include +#include "control.h" +#include "mux.h" + #define INT_USB_IRQ_GEN INT_24XX_USB_IRQ_GEN #define INT_USB_IRQ_NISO INT_24XX_USB_IRQ_NISO #define INT_USB_IRQ_ISO INT_24XX_USB_IRQ_ISO #define INT_USB_IRQ_HGEN INT_24XX_USB_IRQ_HGEN #define INT_USB_IRQ_OTG INT_24XX_USB_IRQ_OTG -#include "mux.h" - #if defined(CONFIG_ARCH_OMAP2) #ifdef CONFIG_USB_GADGET_OMAP diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h deleted file mode 100644 index 54b0c3529c8..00000000000 --- a/arch/arm/plat-omap/include/plat/control.h +++ /dev/null @@ -1,368 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/control.h - * - * OMAP2/3/4 System Control Module definitions - * - * Copyright (C) 2007-2009 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_CONTROL_H -#define __ASM_ARCH_CONTROL_H - -#include -#include -#include -#include -#include - -#ifndef __ASSEMBLY__ -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#else -#define OMAP242X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) -#define OMAP243X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) -#endif /* __ASSEMBLY__ */ - -/* - * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for - * OMAP24XX and OMAP34XX. - */ - -/* Control submodule offsets */ - -#define OMAP2_CONTROL_INTERFACE 0x000 -#define OMAP2_CONTROL_PADCONFS 0x030 -#define OMAP2_CONTROL_GENERAL 0x270 -#define OMAP343X_CONTROL_MEM_WKUP 0x600 -#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 -#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 - -/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ - -#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) - -/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ -#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) -#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) -#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) -#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) -#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) -#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) -#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) -#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) -#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) -#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) -#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) -#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) - -/* 242x-only CONTROL_GENERAL register offsets */ -#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ -#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) - -/* 243x-only CONTROL_GENERAL register offsets */ -/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ -#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) -#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) -#define OMAP243X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x0230) - -/* 24xx-only CONTROL_GENERAL register offsets */ -#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) -#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) -#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) -#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) -#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) -#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) -#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) -#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) -#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) -#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) -#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) -#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) - -#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0) - -/* 34xx-only CONTROL_GENERAL register offsets */ -#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) -#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) -#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) -#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) -#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) -#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) -#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) -#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) -#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) -#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) -#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) -#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) -#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) -#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) -#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) -#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) -#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) -#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) -#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) -#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) -#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) -#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) -#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) -#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) -#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) -#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) -#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) -#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) -#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) -#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) -#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CONTROL_DEBOBS(i) (OMAP2_CONTROL_GENERAL + 0x01B0 \ - + ((i) >> 1) * 4 + (!((i) & 1)) * 2) -#define OMAP343X_CONTROL_PROG_IO0 (OMAP2_CONTROL_GENERAL + 0x01D4) -#define OMAP343X_CONTROL_PROG_IO1 (OMAP2_CONTROL_GENERAL + 0x01D8) -#define OMAP343X_CONTROL_DSS_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E0) -#define OMAP343X_CONTROL_CORE_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E4) -#define OMAP343X_CONTROL_PER_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01E8) -#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING (OMAP2_CONTROL_GENERAL + 0x01EC) -#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02B0) -#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02B4) -#define OMAP343X_CONTROL_SRAMLDO4 (OMAP2_CONTROL_GENERAL + 0x02B8) -#define OMAP343X_CONTROL_SRAMLDO5 (OMAP2_CONTROL_GENERAL + 0x02C0) -#define OMAP343X_CONTROL_CSI (OMAP2_CONTROL_GENERAL + 0x02C4) - -/* AM35XX only CONTROL_GENERAL register offsets */ -#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038) -#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310) -#define AM35XX_CONTROL_DEVCONF3 (OMAP2_CONTROL_GENERAL + 0x0314) -#define AM35XX_CONTROL_CBA_PRIORITY (OMAP2_CONTROL_GENERAL + 0x0320) -#define AM35XX_CONTROL_LVL_INTR_CLEAR (OMAP2_CONTROL_GENERAL + 0x0324) -#define AM35XX_CONTROL_IP_SW_RESET (OMAP2_CONTROL_GENERAL + 0x0328) -#define AM35XX_CONTROL_IPSS_CLK_CTRL (OMAP2_CONTROL_GENERAL + 0x032C) - -/* 34xx PADCONF register offsets */ -#define OMAP343X_PADCONF_ETK(i) (OMAP2_CONTROL_PADCONFS + 0x5a8 + \ - (i)*2) -#define OMAP343X_PADCONF_ETK_CLK OMAP343X_PADCONF_ETK(0) -#define OMAP343X_PADCONF_ETK_CTL OMAP343X_PADCONF_ETK(1) -#define OMAP343X_PADCONF_ETK_D0 OMAP343X_PADCONF_ETK(2) -#define OMAP343X_PADCONF_ETK_D1 OMAP343X_PADCONF_ETK(3) -#define OMAP343X_PADCONF_ETK_D2 OMAP343X_PADCONF_ETK(4) -#define OMAP343X_PADCONF_ETK_D3 OMAP343X_PADCONF_ETK(5) -#define OMAP343X_PADCONF_ETK_D4 OMAP343X_PADCONF_ETK(6) -#define OMAP343X_PADCONF_ETK_D5 OMAP343X_PADCONF_ETK(7) -#define OMAP343X_PADCONF_ETK_D6 OMAP343X_PADCONF_ETK(8) -#define OMAP343X_PADCONF_ETK_D7 OMAP343X_PADCONF_ETK(9) -#define OMAP343X_PADCONF_ETK_D8 OMAP343X_PADCONF_ETK(10) -#define OMAP343X_PADCONF_ETK_D9 OMAP343X_PADCONF_ETK(11) -#define OMAP343X_PADCONF_ETK_D10 OMAP343X_PADCONF_ETK(12) -#define OMAP343X_PADCONF_ETK_D11 OMAP343X_PADCONF_ETK(13) -#define OMAP343X_PADCONF_ETK_D12 OMAP343X_PADCONF_ETK(14) -#define OMAP343X_PADCONF_ETK_D13 OMAP343X_PADCONF_ETK(15) -#define OMAP343X_PADCONF_ETK_D14 OMAP343X_PADCONF_ETK(16) -#define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) - -/* 34xx GENERAL_WKUP regist offsets */ -#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ - 0x008 + (i)) -#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) -#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C) -#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010) -#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014) -#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018) - -/* 34xx D2D idle-related pins, handled by PM core */ -#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250 -#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254 - -/* - * REVISIT: This list of registers is not comprehensive - there are more - * that should be added. - */ - -/* - * Control module register bit defines - these should eventually go into - * their own regbits file. Some of these will be complicated, depending - * on the device type (general-purpose, emulator, test, secure, bad, other) - * and the security mode (secure, non-secure, don't care) - */ -/* CONTROL_DEVCONF0 bits */ -#define OMAP2_MMCSDIO1ADPCLKISEL (1 << 24) /* MMC1 loop back clock */ -#define OMAP24XX_USBSTANDBYCTRL (1 << 15) -#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) -#define OMAP2_MCBSP1_FSR_MASK (1 << 4) -#define OMAP2_MCBSP1_CLKR_MASK (1 << 3) -#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) - -/* CONTROL_DEVCONF1 bits */ -#define OMAP243X_MMC1_ACTIVE_OVERWRITE (1 << 31) -#define OMAP2_MMCSDIO2ADPCLKISEL (1 << 6) /* MMC2 loop back clock */ -#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ -#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ -#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ - -/* CONTROL_STATUS bits */ -#define OMAP2_DEVICETYPE_MASK (0x7 << 8) -#define OMAP2_SYSBOOT_5_MASK (1 << 5) -#define OMAP2_SYSBOOT_4_MASK (1 << 4) -#define OMAP2_SYSBOOT_3_MASK (1 << 3) -#define OMAP2_SYSBOOT_2_MASK (1 << 2) -#define OMAP2_SYSBOOT_1_MASK (1 << 1) -#define OMAP2_SYSBOOT_0_MASK (1 << 0) - -/* CONTROL_PBIAS_LITE bits */ -#define OMAP343X_PBIASLITESUPPLY_HIGH1 (1 << 15) -#define OMAP343X_PBIASLITEVMODEERROR1 (1 << 11) -#define OMAP343X_PBIASSPEEDCTRL1 (1 << 10) -#define OMAP343X_PBIASLITEPWRDNZ1 (1 << 9) -#define OMAP343X_PBIASLITEVMODE1 (1 << 8) -#define OMAP343X_PBIASLITESUPPLY_HIGH0 (1 << 7) -#define OMAP343X_PBIASLITEVMODEERROR0 (1 << 3) -#define OMAP2_PBIASSPEEDCTRL0 (1 << 2) -#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1) -#define OMAP2_PBIASLITEVMODE0 (1 << 0) - -/* CONTROL_PROG_IO1 bits */ -#define OMAP3630_PRG_SDMMC1_SPEEDCTRL (1 << 20) - -/* CONTROL_IVA2_BOOTMOD bits */ -#define OMAP3_IVA2_BOOTMOD_SHIFT 0 -#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0) -#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0) - -/* CONTROL_PADCONF_X bits */ -#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15) -#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14) - -#define OMAP343X_SCRATCHPAD_ROM (OMAP343X_CTRL_BASE + 0x860) -#define OMAP343X_SCRATCHPAD (OMAP343X_CTRL_BASE + 0x910) -#define OMAP343X_SCRATCHPAD_ROM_OFFSET 0x19C - -/* AM35XX_CONTROL_IPSS_CLK_CTRL bits */ -#define AM35XX_USBOTG_VBUSP_CLK_SHIFT 0 -#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT 1 -#define AM35XX_VPFE_VBUSP_CLK_SHIFT 2 -#define AM35XX_HECC_VBUSP_CLK_SHIFT 3 -#define AM35XX_USBOTG_FCLK_SHIFT 8 -#define AM35XX_CPGMAC_FCLK_SHIFT 9 -#define AM35XX_VPFE_FCLK_SHIFT 10 - -/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/ -#define AM35XX_CPGMAC_C0_MISC_PULSE_CLR BIT(0) -#define AM35XX_CPGMAC_C0_RX_PULSE_CLR BIT(1) -#define AM35XX_CPGMAC_C0_RX_THRESH_CLR BIT(2) -#define AM35XX_CPGMAC_C0_TX_PULSE_CLR BIT(3) -#define AM35XX_USBOTGSS_INT_CLR BIT(4) -#define AM35XX_VPFE_CCDC_VD0_INT_CLR BIT(5) -#define AM35XX_VPFE_CCDC_VD1_INT_CLR BIT(6) -#define AM35XX_VPFE_CCDC_VD2_INT_CLR BIT(7) - -/*AM35XX CONTROL_IP_SW_RESET bits*/ -#define AM35XX_USBOTGSS_SW_RST BIT(0) -#define AM35XX_CPGMACSS_SW_RST BIT(1) -#define AM35XX_VPFE_VBUSP_SW_RST BIT(2) -#define AM35XX_HECC_SW_RST BIT(3) -#define AM35XX_VPFE_PCLK_SW_RST BIT(4) - -/* - * CONTROL OMAP STATUS register to identify OMAP3 features - */ -#define OMAP3_CONTROL_OMAP_STATUS 0x044c - -#define OMAP3_SGX_SHIFT 13 -#define OMAP3_SGX_MASK (3 << OMAP3_SGX_SHIFT) -#define FEAT_SGX_FULL 0 -#define FEAT_SGX_HALF 1 -#define FEAT_SGX_NONE 2 - -#define OMAP3_IVA_SHIFT 12 -#define OMAP3_IVA_MASK (1 << OMAP3_SGX_SHIFT) -#define FEAT_IVA 0 -#define FEAT_IVA_NONE 1 - -#define OMAP3_L2CACHE_SHIFT 10 -#define OMAP3_L2CACHE_MASK (3 << OMAP3_L2CACHE_SHIFT) -#define FEAT_L2CACHE_NONE 0 -#define FEAT_L2CACHE_64KB 1 -#define FEAT_L2CACHE_128KB 2 -#define FEAT_L2CACHE_256KB 3 - -#define OMAP3_ISP_SHIFT 5 -#define OMAP3_ISP_MASK (1<< OMAP3_ISP_SHIFT) -#define FEAT_ISP 0 -#define FEAT_ISP_NONE 1 - -#define OMAP3_NEON_SHIFT 4 -#define OMAP3_NEON_MASK (1<< OMAP3_NEON_SHIFT) -#define FEAT_NEON 0 -#define FEAT_NEON_NONE 1 - - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_ARCH_OMAP2PLUS -extern void __iomem *omap_ctrl_base_get(void); -extern u8 omap_ctrl_readb(u16 offset); -extern u16 omap_ctrl_readw(u16 offset); -extern u32 omap_ctrl_readl(u16 offset); -extern u32 omap4_ctrl_pad_readl(u16 offset); -extern void omap_ctrl_writeb(u8 val, u16 offset); -extern void omap_ctrl_writew(u16 val, u16 offset); -extern void omap_ctrl_writel(u32 val, u16 offset); -extern void omap4_ctrl_pad_writel(u32 val, u16 offset); - -extern void omap3_save_scratchpad_contents(void); -extern void omap3_clear_scratchpad_contents(void); -extern u32 *get_restore_pointer(void); -extern u32 *get_es3_restore_pointer(void); -extern u32 omap3_arm_context[128]; -extern void omap3_control_save_context(void); -extern void omap3_control_restore_context(void); - -#else -#define omap_ctrl_base_get() 0 -#define omap_ctrl_readb(x) 0 -#define omap_ctrl_readw(x) 0 -#define omap_ctrl_readl(x) 0 -#define omap4_ctrl_pad_readl(x) 0 -#define omap_ctrl_writeb(x, y) WARN_ON(1) -#define omap_ctrl_writew(x, y) WARN_ON(1) -#define omap_ctrl_writel(x, y) WARN_ON(1) -#define omap4_ctrl_pad_writel(x, y) WARN_ON(1) -#endif -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_CONTROL_H */ - diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 0d6f076cf74..c8dae02f070 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -20,7 +20,6 @@ #include #include -#include #include #define DRIVER_NAME "omap-hsuart" diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 09f8c287133..45d99e955f7 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -27,7 +27,6 @@ #include #include -#include #include "../mach-omap2/cm-regbits-34xx.h" diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index f81e4f025f2..7f472a57490 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -54,7 +54,6 @@ #include #include -#include #include "omap_udc.h" @@ -2309,21 +2308,12 @@ static char *trx_mode(unsigned m, int enabled) static int proc_otg_show(struct seq_file *s) { u32 tmp; - u32 trans; - char *ctrl_name; + u32 trans = 0; + char *ctrl_name = "(UNKNOWN)"; + /* XXX This needs major revision for OMAP2+ */ tmp = omap_readl(OTG_REV); - if (cpu_is_omap24xx()) { - /* - * REVISIT: Not clear how this works on OMAP2. trans - * is ANDed to produce bits 7 and 8, which might make - * sense for USB_TRANSCEIVER_CTRL on OMAP1, - * but with CONTROL_DEVCONF, these bits have something to - * do with the frame adjustment counter and McBSP2. - */ - ctrl_name = "control_devconf"; - trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); - } else { + if (cpu_class_is_omap1()) { ctrl_name = "tranceiver_ctrl"; trans = omap_readw(USB_TRANSCEIVER_CTRL); } -- cgit v1.2.3-70-g09d2 From bc487fb341af05120bccb9f59ce76302391dcc77 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Fri, 22 Oct 2010 11:15:16 -0700 Subject: omap: complete removal of machine_desc.io_pg_offst and .phys_io Commit ab69bcd66fb4be64edfc767365cb9eb084961246 (arm: remove machine_desc.io_pg_offst and .phys_io) could not update the new boards in the omap tree. This causes the build of omap2plus_defconfig to fail. Fix this. Signed-off-by: Anand Gadiyar Cc: Nicolas Pitre Cc: Eric Miao [tony@atomide.com: updated description] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-cm-t3517.c | 2 -- arch/arm/mach-omap2/board-igep0030.c | 2 -- arch/arm/mach-omap2/board-omap3logic.c | 4 ---- 3 files changed, 8 deletions(-) (limited to 'arch/arm/mach-omap2/board-cm-t3517.c') diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index c49319ff5c3..1dd303e9a26 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -283,8 +283,6 @@ static void __init cm_t3517_init(void) } MACHINE_START(CM_T3517, "Compulab CM-T3517") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .reserve = omap_reserve, diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index 7ed41e076c0..22b0b253e16 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -392,8 +392,6 @@ static void __init igep3_init(void) } MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .phys_io = 0x48000000, - .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .init_irq = igep3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 44ff6744ef5..5f7d2c1e7ef 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -225,8 +225,6 @@ static void __init omap3logic_init(void) } MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .init_irq = omap3logic_init_irq, @@ -235,8 +233,6 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_map_io, .init_irq = omap3logic_init_irq, -- cgit v1.2.3-70-g09d2