From edfaf05c2fcb853fcf35f12aeb9c340f5913337f Mon Sep 17 00:00:00 2001 From: Victor Kamensky Date: Tue, 15 Apr 2014 20:37:46 +0300 Subject: ARM: OMAP2+: raw read and write endian fix All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky Signed-off-by: Taras Kondratiuk Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-omap2/board-flash.c') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ac82512b9c8..84cc1482e58 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void) if (!fpga_map_addr) return -ENOMEM; - if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) + if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV))) /* we dont have an DEBUG FPGA??? */ /* Depend on #defines!! default to strata boot return param */ goto unmap; /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */ - cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; + cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; /* ES2.0 SDP's onwards 4 dip switches are provided for CS */ if (omap_rev() >= OMAP3430_REV_ES1_0) -- cgit v1.2.3-70-g09d2 From 5005e0b76781c37d0a16dd6dd17d015098e8ce92 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 16 May 2014 14:45:40 -0700 Subject: ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards Commit c66d039197e4 broke NAND for non-DT boot on all OMAP2 and OMAP3 boards using board_nand_init(). Following error is seen at boot [ 0.154998] (null): Unsupported NAND ECC scheme selected For OMAP2 and OMAP3 platforms, the ecc_opt parameter in platform data must be set to OMAP_ECC_HAM1_CODE_HW to work properly. Tested on omap3-beagle c4. Fixes: c66d039197e4 (mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes) Cc: stable@vger.kernel.org # v3.12+ Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-omap2/board-flash.c') diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ac82512b9c8..b6885e42c0a 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ -- cgit v1.2.3-70-g09d2