From ca43ea345de96dc214be790b6cebedbdfe110b63 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Wed, 15 May 2013 20:18:38 +0530 Subject: ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active Some IPs (like UART) need the sidle mode to be controlled in SW only while they are active. Once they go inactive, they need the IP to be put back in HW control so they are also wakeup capable. The flag HWMOD_SWSUP_SIDLE takes care of IPs which need the sidle mode to be *always* controlled in SWSUP. We now have a need to control IPs sidle mode in SWSUP only while its active. So define a new flag 'HWMOD_SWSUP_SIDLE_ACT' to help the framework know about these new IP requirements. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra Nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/mach-omap2/omap_hwmod.h') diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index fe5962921f0..8498774b5fb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -463,6 +463,9 @@ struct omap_hwmod_omap4_prcm { * is kept in force-standby mode. Failing to do so causes PM problems * with musb on OMAP3630 at least. Note that musb has a dedicated register * to control MSTANDBY signal when MIDLEMODE is set to force-standby. + * HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module + * out of idle, but rely on smart-idle to the put it back in idle, + * so the wakeups are still functional (Only known case for now is UART) */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -476,6 +479,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) #define HWMOD_BLOCK_WFI (1 << 10) #define HWMOD_FORCE_MSTANDBY (1 << 11) +#define HWMOD_SWSUP_SIDLE_ACT (1 << 12) /* * omap_hwmod._int_flags definitions -- cgit v1.2.3-70-g09d2 From 3260c76055afc6c9396e5ad9f9e599505ea8891f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Wed, 15 May 2013 20:18:42 +0530 Subject: ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis With the OMAP serial driver sysc cleanup patches in this series, we can now remove the hwmod external apis for sysc fiddling. While at this, also remove unused sysc auto idle api from hwmod code. Tested-by: Vaibhav Bedia Tested-by: Sourav Poddar Signed-off-by: Rajendra nayak Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-by: Kevin Hilman # OMAP4/Panda Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 68 ---------------------------------------- arch/arm/mach-omap2/omap_hwmod.h | 3 -- 2 files changed, 71 deletions(-) (limited to 'arch/arm/mach-omap2/omap_hwmod.h') diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5739429894b..03931425029 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2254,42 +2254,6 @@ static int _idle(struct omap_hwmod *oh) return 0; } -/** - * omap_hwmod_set_ocp_autoidle - set the hwmod's OCP autoidle bit - * @oh: struct omap_hwmod * - * @autoidle: desired AUTOIDLE bitfield value (0 or 1) - * - * Sets the IP block's OCP autoidle bit in hardware, and updates our - * local copy. Intended to be used by drivers that require - * direct manipulation of the AUTOIDLE bits. - * Returns -EINVAL if @oh is null or is not in the ENABLED state, or passes - * along the return value from _set_module_autoidle(). - * - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle) -{ - u32 v; - int retval = 0; - unsigned long flags; - - if (!oh || oh->_state != _HWMOD_STATE_ENABLED) - return -EINVAL; - - spin_lock_irqsave(&oh->_lock, flags); - - v = oh->_sysc_cache; - - retval = _set_module_autoidle(oh, autoidle, &v); - - if (!retval) - _write_sysconfig(v, oh); - - spin_unlock_irqrestore(&oh->_lock, flags); - - return retval; -} - /** * _shutdown - shutdown an omap_hwmod * @oh: struct omap_hwmod * @@ -3188,38 +3152,6 @@ error: return ret; } -/** - * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode - * @oh: struct omap_hwmod * - * @idlemode: SIDLEMODE field bits (shifted to bit 0) - * - * Sets the IP block's OCP slave idlemode in hardware, and updates our - * local copy. Intended to be used by drivers that have some erratum - * that requires direct manipulation of the SIDLEMODE bits. Returns - * -EINVAL if @oh is null, or passes along the return value from - * _set_slave_idlemode(). - * - * XXX Does this function have any current users? If not, we should - * remove it; it is better to let the rest of the hwmod code handle this. - * Any users of this function should be scrutinized carefully. - */ -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) -{ - u32 v; - int retval = 0; - - if (!oh) - return -EINVAL; - - v = oh->_sysc_cache; - - retval = _set_slave_idlemode(oh, idlemode, &v); - if (!retval) - _write_sysconfig(v, oh); - - return retval; -} - /** * omap_hwmod_lookup - look up a registered omap_hwmod by name * @name: name of the omap_hwmod to look up diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 8498774b5fb..0c898f58ac9 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -645,9 +645,6 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); int omap_hwmod_disable_clocks(struct omap_hwmod *oh); -int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode); -int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle); - int omap_hwmod_reset(struct omap_hwmod *oh); void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); -- cgit v1.2.3-70-g09d2