From 554cdaefd1cf7bb54b209c4e68c7cec87ce442a9 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 15 May 2011 13:32:53 +0200 Subject: ARM: orion5x: Refactor mpp code to use common orion platform mpp. Signed-off-by: Andrew Lunn Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/d2net-setup.c | 44 ++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 22 deletions(-) (limited to 'arch/arm/mach-orion5x/d2net-setup.c') diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 42580757930..19cf5bf99f1 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -267,28 +267,28 @@ static struct platform_device d2net_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Board ID (bit 0) */ - { 1, MPP_GPIO }, /* Board ID (bit 1) */ - { 2, MPP_GPIO }, /* Board ID (bit 2) */ - { 3, MPP_GPIO }, /* SATA 0 power */ - { 4, MPP_UNUSED }, - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED */ - { 7, MPP_UNUSED }, - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_GPIO }, /* SATA 1 power */ - { 13, MPP_UNUSED }, - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_GPIO }, /* Blue front LED blink control */ - { 17, MPP_UNUSED }, - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_UNUSED }, - { -1 } +static unsigned int d2net_mpp_modes[] __initdata = { + MPP0_GPIO, /* Board ID (bit 0) */ + MPP1_GPIO, /* Board ID (bit 1) */ + MPP2_GPIO, /* Board ID (bit 2) */ + MPP3_GPIO, /* SATA 0 power */ + MPP4_UNUSED, + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED */ + MPP7_UNUSED, + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_GPIO, /* SATA 1 power */ + MPP13_UNUSED, + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_GPIO, /* Blue front LED blink control */ + MPP17_UNUSED, + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_UNUSED, + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: Blue front LED off */ /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ -- cgit v1.2.3-70-g09d2