From 80796f2a40504526797d488d17b87c4274d430fa Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 25 Nov 2008 11:03:03 +0800 Subject: [ARM] pxa: use instead of unnecessary Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-pxa/devices.c') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 35736fc0863..541940b5d79 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,7 +4,7 @@ #include #include -#include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 02f652626a8f23e513877cb751c8ea533739c28f Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 28 Nov 2008 14:08:53 +0800 Subject: [ARM] pxa: move UART register definitions into dedicated regs-uart.h Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 16 ++-- arch/arm/mach-pxa/include/mach/pxa-regs.h | 141 --------------------------- arch/arm/mach-pxa/include/mach/regs-uart.h | 143 ++++++++++++++++++++++++++++ arch/arm/mach-pxa/include/mach/uncompress.h | 2 +- drivers/net/irda/pxaficp_ir.c | 1 + drivers/serial/pxa.c | 1 + 6 files changed, 154 insertions(+), 150 deletions(-) create mode 100644 arch/arm/mach-pxa/include/mach/regs-uart.h (limited to 'arch/arm/mach-pxa/devices.c') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 541940b5d79..4db44925897 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -156,8 +156,8 @@ void __init set_pxa_fb_parent(struct device *parent_dev) static struct resource pxa_resource_ffuart[] = { { - .start = __PREG(FFUART), - .end = __PREG(FFUART) + 35, + .start = 0x40100000, + .end = 0x40100023, .flags = IORESOURCE_MEM, }, { .start = IRQ_FFUART, @@ -175,8 +175,8 @@ struct platform_device pxa_device_ffuart= { static struct resource pxa_resource_btuart[] = { { - .start = __PREG(BTUART), - .end = __PREG(BTUART) + 35, + .start = 0x40200000, + .end = 0x40200023, .flags = IORESOURCE_MEM, }, { .start = IRQ_BTUART, @@ -194,8 +194,8 @@ struct platform_device pxa_device_btuart = { static struct resource pxa_resource_stuart[] = { { - .start = __PREG(STUART), - .end = __PREG(STUART) + 35, + .start = 0x40700000, + .end = 0x40700023, .flags = IORESOURCE_MEM, }, { .start = IRQ_STUART, @@ -213,8 +213,8 @@ struct platform_device pxa_device_stuart = { static struct resource pxa_resource_hwuart[] = { { - .start = __PREG(HWUART), - .end = __PREG(HWUART) + 47, + .start = 0x41600000, + .end = 0x4160002F, .flags = IORESOURCE_MEM, }, { .start = IRQ_HWUART, diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h index ab62f6c11e0..cb9b46de97c 100644 --- a/arch/arm/mach-pxa/include/mach/pxa-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h @@ -123,147 +123,6 @@ #define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * UARTs - */ - -/* Full Function UART (FFUART) */ -#define FFUART FFRBR -#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ -#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ -#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ -#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ -#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ -#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ -#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ -#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ -#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ -#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ -#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ -#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Bluetooth UART (BTUART) */ -#define BTUART BTRBR -#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ -#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ -#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ -#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ -#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ -#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ -#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ -#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ -#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ -#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ -#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ -#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Standard UART (STUART) */ -#define STUART STRBR -#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ -#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ -#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ -#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ -#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ -#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ -#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ -#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ -#define STMSR __REG(0x40700018) /* Reserved */ -#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ -#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ -#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -/* Hardware UART (HWUART) */ -#define HWUART HWRBR -#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ -#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ -#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ -#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ -#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ -#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ -#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ -#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ -#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ -#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ -#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ -#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ -#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ -#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ -#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ -#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ - -#define IER_DMAE (1 << 7) /* DMA Requests Enable */ -#define IER_UUE (1 << 6) /* UART Unit Enable */ -#define IER_NRZE (1 << 5) /* NRZ coding Enable */ -#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ -#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ -#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ -#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ -#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ - -#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ -#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ -#define IIR_TOD (1 << 3) /* Time Out Detected */ -#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ -#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ -#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ - -#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ -#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ -#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ -#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ -#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ -#define FCR_ITL_1 (0) -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ -#define LCR_SB (1 << 6) /* Set Break */ -#define LCR_STKYP (1 << 5) /* Sticky Parity */ -#define LCR_EPS (1 << 4) /* Even Parity Select */ -#define LCR_PEN (1 << 3) /* Parity Enable */ -#define LCR_STB (1 << 2) /* Stop Bit */ -#define LCR_WLS1 (1 << 1) /* Word Length Select */ -#define LCR_WLS0 (1 << 0) /* Word Length Select */ - -#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ -#define LSR_TEMT (1 << 6) /* Transmitter Empty */ -#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ -#define LSR_BI (1 << 4) /* Break Interrupt */ -#define LSR_FE (1 << 3) /* Framing Error */ -#define LSR_PE (1 << 2) /* Parity Error */ -#define LSR_OE (1 << 1) /* Overrun Error */ -#define LSR_DR (1 << 0) /* Data Ready */ - -#define MCR_LOOP (1 << 4) -#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ -#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ -#define MCR_RTS (1 << 1) /* Request to Send */ -#define MCR_DTR (1 << 0) /* Data Terminal Ready */ - -#define MSR_DCD (1 << 7) /* Data Carrier Detect */ -#define MSR_RI (1 << 6) /* Ring Indicator */ -#define MSR_DSR (1 << 5) /* Data Set Ready */ -#define MSR_CTS (1 << 4) /* Clear To Send */ -#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ -#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ -#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ - -/* - * IrSR (Infrared Selection Register) - */ -#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ -#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ -#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ -#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ -#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ - - /* * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c */ diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/include/mach/regs-uart.h new file mode 100644 index 00000000000..55aeb7fb72f --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/regs-uart.h @@ -0,0 +1,143 @@ +#ifndef __ASM_ARCH_REGS_UART_H +#define __ASM_ARCH_REGS_UART_H + +/* + * UARTs + */ + +/* Full Function UART (FFUART) */ +#define FFUART FFRBR +#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ +#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ +#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ +#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ +#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ +#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ +#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ +#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ +#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ +#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ +#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ +#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Bluetooth UART (BTUART) */ +#define BTUART BTRBR +#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ +#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ +#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ +#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ +#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ +#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ +#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ +#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ +#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ +#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ +#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ +#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Standard UART (STUART) */ +#define STUART STRBR +#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ +#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ +#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ +#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ +#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ +#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ +#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ +#define STLSR __REG(0x40700014) /* Line Status Register (read only) */ +#define STMSR __REG(0x40700018) /* Reserved */ +#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ +#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ +#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +/* Hardware UART (HWUART) */ +#define HWUART HWRBR +#define HWRBR __REG(0x41600000) /* Receive Buffer Register (read only) */ +#define HWTHR __REG(0x41600000) /* Transmit Holding Register (write only) */ +#define HWIER __REG(0x41600004) /* Interrupt Enable Register (read/write) */ +#define HWIIR __REG(0x41600008) /* Interrupt ID Register (read only) */ +#define HWFCR __REG(0x41600008) /* FIFO Control Register (write only) */ +#define HWLCR __REG(0x4160000C) /* Line Control Register (read/write) */ +#define HWMCR __REG(0x41600010) /* Modem Control Register (read/write) */ +#define HWLSR __REG(0x41600014) /* Line Status Register (read only) */ +#define HWMSR __REG(0x41600018) /* Modem Status Register (read only) */ +#define HWSPR __REG(0x4160001C) /* Scratch Pad Register (read/write) */ +#define HWISR __REG(0x41600020) /* Infrared Selection Register (read/write) */ +#define HWFOR __REG(0x41600024) /* Receive FIFO Occupancy Register (read only) */ +#define HWABR __REG(0x41600028) /* Auto-Baud Control Register (read/write) */ +#define HWACR __REG(0x4160002C) /* Auto-Baud Count Register (read only) */ +#define HWDLL __REG(0x41600000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ +#define HWDLH __REG(0x41600004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ + +#define IER_DMAE (1 << 7) /* DMA Requests Enable */ +#define IER_UUE (1 << 6) /* UART Unit Enable */ +#define IER_NRZE (1 << 5) /* NRZ coding Enable */ +#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ +#define IER_MIE (1 << 3) /* Modem Interrupt Enable */ +#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ +#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ +#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ + +#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ +#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ +#define IIR_TOD (1 << 3) /* Time Out Detected */ +#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ +#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ +#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ + +#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ +#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ +#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ +#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ +#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ +#define FCR_ITL_1 (0) +#define FCR_ITL_8 (FCR_ITL1) +#define FCR_ITL_16 (FCR_ITL2) +#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) + +#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ +#define LCR_SB (1 << 6) /* Set Break */ +#define LCR_STKYP (1 << 5) /* Sticky Parity */ +#define LCR_EPS (1 << 4) /* Even Parity Select */ +#define LCR_PEN (1 << 3) /* Parity Enable */ +#define LCR_STB (1 << 2) /* Stop Bit */ +#define LCR_WLS1 (1 << 1) /* Word Length Select */ +#define LCR_WLS0 (1 << 0) /* Word Length Select */ + +#define LSR_FIFOE (1 << 7) /* FIFO Error Status */ +#define LSR_TEMT (1 << 6) /* Transmitter Empty */ +#define LSR_TDRQ (1 << 5) /* Transmit Data Request */ +#define LSR_BI (1 << 4) /* Break Interrupt */ +#define LSR_FE (1 << 3) /* Framing Error */ +#define LSR_PE (1 << 2) /* Parity Error */ +#define LSR_OE (1 << 1) /* Overrun Error */ +#define LSR_DR (1 << 0) /* Data Ready */ + +#define MCR_LOOP (1 << 4) +#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ +#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ +#define MCR_RTS (1 << 1) /* Request to Send */ +#define MCR_DTR (1 << 0) /* Data Terminal Ready */ + +#define MSR_DCD (1 << 7) /* Data Carrier Detect */ +#define MSR_RI (1 << 6) /* Ring Indicator */ +#define MSR_DSR (1 << 5) /* Data Set Ready */ +#define MSR_CTS (1 << 4) /* Clear To Send */ +#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ +#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ +#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ +#define MSR_DCTS (1 << 0) /* Delta Clear To Send */ + +/* + * IrSR (Infrared Selection Register) + */ +#define STISR_RXPL (1 << 4) /* Receive Data Polarity */ +#define STISR_TXPL (1 << 3) /* Transmit Data Polarity */ +#define STISR_XMODE (1 << 2) /* Transmit Pulse Width Select */ +#define STISR_RCVEIR (1 << 1) /* Receiver SIR Enable */ +#define STISR_XMITIR (1 << 0) /* Transmitter SIR Enable */ + +#endif /* __ASM_ARCH_REGS_UART_H */ diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 21e3e890af9..a9a4f302b6e 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -10,7 +10,7 @@ */ #include -#include +#include #include #define __REG(x) ((volatile unsigned long *)x) diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 06f448a37ca..ba445133f3e 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -25,6 +25,7 @@ #include #include #include +#include #define FICP __REG(0x40800000) /* Start of FICP area */ #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index abc00be5543..a793d1fa1cd 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -48,6 +48,7 @@ #include #include #include +#include struct uart_pxa_port { -- cgit v1.2.3-70-g09d2 From 994642934d99b9a4d5447d628de7c321c4fde5fe Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 28 Nov 2008 15:01:55 +0800 Subject: [ARM] pxa: move power I2C device definitions into devices.c Let's put these devices into a central place even if they are now processor specific, as they might be re-used in later processors. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 42 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/pxa27x.c | 20 -------------------- arch/arm/mach-pxa/pxa3xx.c | 19 ------------------- 3 files changed, 42 insertions(+), 39 deletions(-) (limited to 'arch/arm/mach-pxa/devices.c') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 4db44925897..55699a216f9 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -261,6 +261,48 @@ void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa_device_i2c, info); } +#ifdef CONFIG_PXA27x +static struct resource pxa27x_resources_i2c_power[] = { + { + .start = 0x40f00180, + .end = 0x40f001a3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PWRI2C, + .end = IRQ_PWRI2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa27x_device_i2c_power = { + .name = "pxa2xx-i2c", + .id = 1, + .resource = pxa27x_resources_i2c_power, + .num_resources = ARRAY_SIZE(pxa27x_resources_i2c_power), +}; +#endif + +#ifdef CONFIG_PXA3xx +static struct resource pxa3xx_resources_i2c_power[] = { + { + .start = 0x40f500c0, + .end = 0x40f500d3, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PWRI2C, + .end = IRQ_PWRI2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device pxa3xx_device_i2c_power = { + .name = "pxa2xx-i2c", + .id = 1, + .resource = pxa3xx_resources_i2c_power, + .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power), +}; +#endif + static struct resource pxai2s_resources[] = { { .start = 0x40400000, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 67592664493..7c116693185 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -319,26 +319,6 @@ void __init pxa27x_init_irq(void) /* * device registration specific to PXA27x. */ - -static struct resource i2c_power_resources[] = { - { - .start = 0x40f00180, - .end = 0x40f001a3, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PWRI2C, - .end = IRQ_PWRI2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa27x_device_i2c_power = { - .name = "pxa2xx-i2c", - .id = 1, - .resource = i2c_power_resources, - .num_resources = ARRAY_SIZE(i2c_power_resources), -}; - void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) { local_irq_disable(); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index b3cd5d0b0f3..7775f882493 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -529,25 +529,6 @@ void __init pxa3xx_init_irq(void) * device registration specific to PXA3xx. */ -static struct resource i2c_power_resources[] = { - { - .start = 0x40f500c0, - .end = 0x40f500d3, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PWRI2C, - .end = IRQ_PWRI2C, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa3xx_device_i2c_power = { - .name = "pxa2xx-i2c", - .id = 1, - .resource = i2c_power_resources, - .num_resources = ARRAY_SIZE(i2c_power_resources), -}; - void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) { pxa3xx_device_i2c_power.dev.platform_data = info; -- cgit v1.2.3-70-g09d2 From 6f584cfab47173bcbf06b67cb22d519e95317311 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 28 Nov 2008 16:00:24 +0800 Subject: [ARM] pxa: move I2C pin configurations out into board specific files Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cm-x300.c | 4 ++++ arch/arm/mach-pxa/devices.c | 8 -------- arch/arm/mach-pxa/ezx.c | 4 ++++ arch/arm/mach-pxa/magician.c | 4 ++++ arch/arm/mach-pxa/mainstone.c | 4 ++++ arch/arm/mach-pxa/pcm990-baseboard.c | 4 ++++ arch/arm/mach-pxa/spitz.c | 4 ++++ 7 files changed, 24 insertions(+), 8 deletions(-) (limited to 'arch/arm/mach-pxa/devices.c') diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 36a789ce803..ff0c577cd1a 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -136,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = { GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */ GPIO85_GPIO, /* MMC WP */ GPIO99_GPIO, /* Ethernet IRQ */ + + /* Standard I2C */ + GPIO21_I2C_SCL, + GPIO22_I2C_SDA, }; #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 55699a216f9..88c36265144 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include #include @@ -249,15 +248,8 @@ struct platform_device pxa_device_i2c = { .num_resources = ARRAY_SIZE(pxai2c_resources), }; -static unsigned long pxa27x_i2c_mfp_cfg[] = { - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, -}; - void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info) { - if (cpu_is_pxa27x()) - pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg)); pxa_register_device(&pxa_device_i2c, info); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index cc3d850cc0b..a3084125aee 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -112,6 +112,10 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO91_USB_P3_1, /* ICL_XRXD */ GPIO56_USB_P3_4, /* ICL_VMOUT */ GPIO113_USB_P3_3, /* /ICL_VMIN */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, }; static void __init ezx_init(void) diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 519138bc5f8..bf59cec27de 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = { GPIO107_GPIO, /* DS1WM_IRQ */ GPIO108_GPIO, /* GSM_READY */ GPIO115_GPIO, /* nPEN_IRQ */ + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, }; /* diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index f2c7ad8f2b6..5f224968043 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = { GPIO108_KP_MKOUT_5, GPIO96_KP_MKOUT_6, + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + /* GPIO */ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, }; diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index f601425f1b1..1e751545228 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = { GPIO89_USBH1_PEN, /* PWM0 */ GPIO16_PWM0_OUT, + + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, }; /* diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3be76ee2bdb..ebfb146f221 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -122,6 +122,10 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */ GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */ + /* I2C */ + GPIO117_I2C_SCL, + GPIO118_I2C_SDA, + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, }; -- cgit v1.2.3-70-g09d2 From 724931465c234f71551e229dcd8842d1fc531d77 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 13 Nov 2008 23:50:56 +0100 Subject: [ARM] pxa: add resources for incoming rtc-pxa driver Add IO memory and IRQ ressources for pxa based SoC to be able to use the new rtc-pxa driver. Signed-off-by: Robert Jarzmik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 27 ++++++++++++++++++++++++++- arch/arm/mach-pxa/devices.h | 1 + arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 1 + 5 files changed, 30 insertions(+), 2 deletions(-) (limited to 'arch/arm/mach-pxa/devices.c') diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 88c36265144..e16f8e3d58d 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -330,11 +330,36 @@ void __init pxa_set_ficp_info(struct pxaficp_platform_data *info) pxa_register_device(&pxa_device_ficp, info); } -struct platform_device pxa_device_rtc = { +static struct resource pxa_rtc_resources[] = { + [0] = { + .start = 0x40900000, + .end = 0x40900000 + 0x3b, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_RTC1Hz, + .end = IRQ_RTC1Hz, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_RTCAlrm, + .end = IRQ_RTCAlrm, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, }; +struct platform_device pxa_device_rtc = { + .name = "pxa-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(pxa_rtc_resources), + .resource = pxa_rtc_resources, +}; + static struct resource pxa_ac97_resources[] = { [0] = { .start = 0x40500000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index bb04af4b0aa..ecc24a4dca6 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -11,6 +11,7 @@ extern struct platform_device pxa_device_hwuart; extern struct platform_device pxa_device_i2c; extern struct platform_device pxa_device_i2s; extern struct platform_device pxa_device_ficp; +extern struct platform_device sa1100_device_rtc; extern struct platform_device pxa_device_rtc; extern struct platform_device pxa_device_ac97; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 0f672998b2e..265b8a5657b 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -312,7 +312,7 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa_device_btuart, &pxa_device_stuart, &pxa_device_i2s, - &pxa_device_rtc, + &sa1100_device_rtc, &pxa25x_device_ssp, &pxa25x_device_nssp, &pxa25x_device_assp, diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7769718a80b..9fdef7641c2 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -333,6 +333,7 @@ static struct platform_device *devices[] __initdata = { &pxa_device_btuart, &pxa_device_stuart, &pxa_device_i2s, + &sa1100_device_rtc, &pxa_device_rtc, &pxa27x_device_ssp1, &pxa27x_device_ssp2, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index a9b17568473..041b8abb9e1 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -541,6 +541,7 @@ static struct platform_device *devices[] __initdata = { &pxa_device_btuart, &pxa_device_stuart, &pxa_device_i2s, + &sa1100_device_rtc, &pxa_device_rtc, &pxa27x_device_ssp1, &pxa27x_device_ssp2, -- cgit v1.2.3-70-g09d2