From 0ec3cf69304d2e35ad29da3aa9ab43c3dd97677c Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Tue, 19 Aug 2008 13:01:28 +0100 Subject: [ARM] eseries: move LCD defs into machine files This patch removes the seperate files used for the LCD definitions on e-series and places the definitions into the machine specific files. Signed-off-by: Ian Molton --- arch/arm/mach-pxa/e400.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch/arm/mach-pxa/e400.c') diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c index 405e6dcfc3c..0bcf9ece3d3 100644 --- a/arch/arm/mach-pxa/e400.c +++ b/arch/arm/mach-pxa/e400.c @@ -17,12 +17,41 @@ #include #include +#include #include #include +#include + #include "generic.h" #include "eseries.h" +/* ------------------------ E400 LCD definitions ------------------------ */ + +static struct pxafb_mode_info e400_pxafb_mode_info = { + .pixclock = 140703, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 4, + .left_margin = 28, + .right_margin = 8, + .vsync_len = 3, + .upper_margin = 5, + .lower_margin = 6, + .sync = 0, +}; + +static struct pxafb_mach_info e400_pxafb_mach_info = { + .modes = &e400_pxafb_mode_info, + .num_modes = 1, + .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, + .lccr3 = 0, + .pxafb_backlight_power = NULL, +}; + +/* ------------------------ E400 MFP config ----------------------------- */ + static unsigned long e400_pin_config[] __initdata = { /* Chip selects */ GPIO15_nCS_1, /* CS1 - Flash */ @@ -41,9 +70,12 @@ static unsigned long e400_pin_config[] __initdata = { GPIO0_GPIO | WAKEUP_ON_EDGE_RISE, }; +/* ---------------------------------------------------------------------- */ + static void __init e400_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config)); + set_pxa_fb_info(&e400_pxafb_mach_info); } MACHINE_START(E400, "Toshiba e400") -- cgit v1.2.3-70-g09d2