From 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Fri, 20 Aug 2010 15:23:59 +0800 Subject: ARM: pxa: encode IRQ number into .nr_irqs Signed-off-by: Haojian Zhuang Acked-by: Antonio Ospite Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 21 -------------- arch/arm/mach-pxa/balloon3.c | 1 + arch/arm/mach-pxa/cm-x2xx.c | 4 +++ arch/arm/mach-pxa/eseries.c | 7 +++++ arch/arm/mach-pxa/ezx.c | 8 ++++++ arch/arm/mach-pxa/hx4700.c | 1 + arch/arm/mach-pxa/include/mach/balloon3.h | 2 ++ arch/arm/mach-pxa/include/mach/eseries-irq.h | 1 + arch/arm/mach-pxa/include/mach/hx4700.h | 1 + arch/arm/mach-pxa/include/mach/irqs.h | 42 ++-------------------------- arch/arm/mach-pxa/include/mach/littleton.h | 2 ++ arch/arm/mach-pxa/include/mach/lpd270.h | 1 + arch/arm/mach-pxa/include/mach/lubbock.h | 3 ++ arch/arm/mach-pxa/include/mach/magician.h | 2 ++ arch/arm/mach-pxa/include/mach/mainstone.h | 2 ++ arch/arm/mach-pxa/include/mach/pcm027.h | 2 ++ arch/arm/mach-pxa/include/mach/poodle.h | 2 ++ arch/arm/mach-pxa/include/mach/tosa.h | 1 + arch/arm/mach-pxa/include/mach/zeus.h | 2 ++ arch/arm/mach-pxa/include/mach/zylonite.h | 2 ++ arch/arm/mach-pxa/littleton.c | 1 + arch/arm/mach-pxa/lpd270.c | 1 + arch/arm/mach-pxa/lubbock.c | 3 +- arch/arm/mach-pxa/magician.c | 1 + arch/arm/mach-pxa/mainstone.c | 1 + arch/arm/mach-pxa/pcm027.c | 1 + arch/arm/mach-pxa/poodle.c | 1 + arch/arm/mach-pxa/stargate2.c | 3 ++ arch/arm/mach-pxa/tosa.c | 1 + arch/arm/mach-pxa/zeus.c | 1 + arch/arm/mach-pxa/zylonite.c | 1 + 31 files changed, 61 insertions(+), 61 deletions(-) (limited to 'arch/arm/mach-pxa') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3d4926edb67..e2453dba517 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -8,19 +8,16 @@ config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" select PXA25x select SA1111 - select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE bool select PXA3xx select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" @@ -61,7 +58,6 @@ config ARCH_VIPER select ISA select I2C_GPIO select HAVE_PWM - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -69,7 +65,6 @@ config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" select PXA27x select ISA - select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS select ARCOM_PCMCIA @@ -77,7 +72,6 @@ config MACH_BALLOON3 bool "Balloon 3 board" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" @@ -140,13 +134,11 @@ config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_STARGATE2 bool "Intel Stargate 2 Platform" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_XCEP bool "Iskratel Electronics XCEP" @@ -206,13 +198,11 @@ config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT - select PXA_HAVE_BOARD_IRQS config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" @@ -247,7 +237,6 @@ config MACH_COLIBRI_PXA270_INCOME depends on MACH_COLIBRI select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" @@ -274,7 +263,6 @@ config MACH_H4700 select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_H5000 bool "HP iPAQ h5000" @@ -289,7 +277,6 @@ config MACH_MAGICIAN select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 bool "Mitac Mio A701 Support" @@ -307,7 +294,6 @@ config PXA_EZX select PXA27x select IWMMXT select HAVE_PWM - select PXA_HAVE_BOARD_IRQS config MACH_EZX_A780 bool "Motorola EZX A780" @@ -478,7 +464,6 @@ config MACH_POODLE depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO - select PXA_HAVE_BOARD_IRQS config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" @@ -523,7 +508,6 @@ config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x - select PXA_HAVE_BOARD_IRQS config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" @@ -552,7 +536,6 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x - select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" @@ -606,7 +589,6 @@ config MACH_ZIPIT2 bool "Zipit Z2 Handheld" select PXA27x select HAVE_PWM - select PXA_HAVE_BOARD_IRQS endmenu @@ -693,9 +675,6 @@ config SHARPSL_PM_MAX1111 select HWMON select SENSORS_MAX1111 -config PXA_HAVE_BOARD_IRQS - bool - config PXA_HAVE_ISA_IRQS bool diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 9041340fee1..2b81e64beb4 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -779,6 +779,7 @@ MACHINE_START(BALLOON3, "Balloon3") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = balloon3_map_io, + .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index bff6e78f033..ad40e7b141e 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -33,6 +33,9 @@ extern void cmx255_init(void); extern void cmx270_init(void); +/* reserve IRQs for IT8152 */ +#define CMX2XX_NR_IRQS (IRQ_BOARD_START + 40) + /* virtual addresses for statically mapped regions */ #define CMX2XX_VIRT_BASE (0xe8000000) #define CMX2XX_IT8152_VIRT (CMX2XX_VIRT_BASE) @@ -514,6 +517,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = cmx2xx_map_io, + .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 349212a1cbd..4971ce11950 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -183,6 +184,7 @@ MACHINE_START(E330, "Toshiba e330") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e330_init, @@ -233,6 +235,7 @@ MACHINE_START(E350, "Toshiba e350") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e350_init, @@ -356,6 +359,7 @@ MACHINE_START(E400, "Toshiba e400") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e400_init, @@ -545,6 +549,7 @@ MACHINE_START(E740, "Toshiba e740") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e740_init, @@ -737,6 +742,7 @@ MACHINE_START(E750, "Toshiba e750") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e750_init, @@ -933,6 +939,7 @@ MACHINE_START(E800, "Toshiba e800") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, .fixup = eseries_fixup, .init_machine = e800_init, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 626c82b1397..3fe61f4ac79 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -38,6 +38,8 @@ #include "devices.h" #include "generic.h" +#define EZX_NR_IRQS (IRQ_BOARD_START + 24) + #define GPIO12_A780_FLIP_LID 12 #define GPIO15_A1200_FLIP_LID 15 #define GPIO15_A910_FLIP_LID 15 @@ -800,6 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a780_init, @@ -866,6 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e680_init, @@ -932,6 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a1200_init, @@ -1124,6 +1129,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = a910_init, @@ -1190,6 +1196,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e6_init, @@ -1230,6 +1237,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = e2_init, diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 848c861dd23..10104f16e6e 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, .init_machine = hx4700_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h index eec92e6fd7c..561562b4360 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/include/mach/balloon3.h @@ -174,6 +174,8 @@ enum balloon3_features { #define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ) #define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD) +#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 4) + extern int balloon3_has(enum balloon3_features feature); #endif diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h index f2a93d5e31d..de292b269c6 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-irq.h +++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h @@ -25,3 +25,4 @@ #define TMIO_SD_IRQ IRQ_TMIO(1) #define TMIO_USB_IRQ IRQ_TMIO(2) +#define ESERIES_NR_IRQS (IRQ_BOARD_START + 16) diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h index 9eaeed1f87f..37408449ec2 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/include/mach/hx4700.h @@ -17,6 +17,7 @@ #define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO #define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS) +#define HX4700_NR_IRQS (IRQ_BOARD_START + 70) /* * PXA GPIOs diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index ffc8314520f..d372caa75dc 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -117,48 +117,12 @@ /* * The following interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use - * these. There will be 16 IRQs by default. If it is not enough, - * IRQ_BOARD_END is allowed be customized for each board, but keep - * the numbers within sensible limits and in descending order, so - * when multiple config options are selected, the maximum will be - * used. + * these. + * By default, no board IRQ is reserved. It should be finished in + * custom board since sparse IRQ is already enabled. */ #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) -#if defined(CONFIG_MACH_H4700) -#define IRQ_BOARD_END (IRQ_BOARD_START + 70) -#elif defined(CONFIG_MACH_ZYLONITE) -#define IRQ_BOARD_END (IRQ_BOARD_START + 32) -#elif defined(CONFIG_PXA_EZX) -#define IRQ_BOARD_END (IRQ_BOARD_START + 23) -#else -#define IRQ_BOARD_END (IRQ_BOARD_START + 16) -#endif - -/* - * Figure out the MAX IRQ number. - * - * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1. - * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1 - * Otherwise, we have the standard IRQs only. - */ -#ifdef CONFIG_SA1111 -#define NR_IRQS (IRQ_BOARD_END + 55) -#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS) -#define NR_IRQS (IRQ_BOARD_END) -#else #define NR_IRQS (IRQ_BOARD_START) -#endif - -/* add IT8152 IRQs beyond BOARD_END */ -#ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40) - -#if NR_IRQS < (IT8152_LAST_IRQ+1) -#undef NR_IRQS -#define NR_IRQS (IT8152_LAST_IRQ+1) -#endif - -#endif /* CONFIG_PCI_HOST_ITE8152 */ #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h index 6c9b21c5132..2a5726c15e0 100644 --- a/arch/arm/mach-pxa/include/mach/littleton.h +++ b/arch/arm/mach-pxa/include/mach/littleton.h @@ -10,4 +10,6 @@ #define EXT0_GPIO_BASE (NR_BUILTIN_GPIO) #define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x)) +#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8) + #endif /* __ASM_ARCH_LITTLETON_H */ diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h index 0e6440c8168..cd070092b6e 100644 --- a/arch/arm/mach-pxa/include/mach/lpd270.h +++ b/arch/arm/mach-pxa/include/mach/lpd270.h @@ -38,5 +38,6 @@ #define LPD270_USBC_IRQ LPD270_IRQ(2) #define LPD270_ETHERNET_IRQ LPD270_IRQ(3) #define LPD270_AC97_IRQ LPD270_IRQ(4) +#define LPD270_NR_IRQS (IRQ_BOARD_START + 5) #endif diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h index a0d4247f08f..2a086e8373e 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/include/mach/lubbock.h @@ -45,6 +45,9 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) +#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16) +#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55) + #ifndef __ASSEMBLY__ extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set); #endif diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 20ef37d4a9a..0a2efcf7947 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -71,6 +71,8 @@ #define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) #define IRQ_MAGICIAN_VBUS (IRQ_BOARD_START + 3) +#define MAGICIAN_NR_IRQS (IRQ_BOARD_START + 8) + /* * CPLD EGPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h index 86e623abd64..4c2d11cd824 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/include/mach/mainstone.h @@ -134,4 +134,6 @@ #define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14) #define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15) +#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16) + #endif diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h index 04083263167..4bac588478a 100644 --- a/arch/arm/mach-pxa/include/mach/pcm027.h +++ b/arch/arm/mach-pxa/include/mach/pcm027.h @@ -30,6 +30,8 @@ #define PCM027_MMCDET_IRQ PCM027_IRQ(2) #define PCM027_PM_5V_IRQ PCM027_IRQ(3) +#define PCM027_NR_IRQS (IRQ_BOARD_START + 32) + /* I2C RTC */ #define PCM027_RTC_IRQ_GPIO 0 #define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO) diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 0b3e6d051c6..83d1cfd00fc 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -85,6 +85,8 @@ #define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12) #define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13) +#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ + extern struct platform_device poodle_locomo_device; #endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 1bbd1f2e4be..1272c4b56ce 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -20,6 +20,7 @@ /* Jacket Scoop */ #define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) +#define TOSA_NR_IRQS (IRQ_BOARD_START + TC6393XB_NR_IRQS) /* * SCOOP2 internal GPIOs */ diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h index 6e119976003..faa408ab7ad 100644 --- a/arch/arm/mach-pxa/include/mach/zeus.h +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -15,6 +15,8 @@ #ifndef _MACH_ZEUS_H #define _MACH_ZEUS_H +#define ZEUS_NR_IRQS (IRQ_BOARD_START + 48) + /* Physical addresses */ #define ZEUS_FLASH_PHYS PXA_CS0_PHYS #define ZEUS_ETH0_PHYS PXA_CS1_PHYS diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h index 9edf645368d..ea24998b923 100644 --- a/arch/arm/mach-pxa/include/mach/zylonite.h +++ b/arch/arm/mach-pxa/include/mach/zylonite.h @@ -5,6 +5,8 @@ #define EXT_GPIO(x) (128 + (x)) +#define ZYLONITE_NR_IRQS (IRQ_BOARD_START + 32) + /* the following variables are processor specific and initialized * by the corresponding zylonite_pxa3xx_init() */ diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 9b9046185b0..83f3236893b 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .boot_params = 0xa0000100, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = littleton_init, diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index d279507fc74..fc9502ef402 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -509,6 +509,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = lpd270_map_io, + .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, .timer = &pxa_timer, .init_machine = lpd270_init, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 330c3282856..1956c23093d 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = { }; static struct sa1111_platform_data sa1111_info = { - .irq_base = IRQ_BOARD_END, + .irq_base = LUBBOCK_SA1111_IRQ_BASE, }; static struct platform_device sa1111_device = { @@ -560,6 +560,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = lubbock_map_io, + .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, .timer = &pxa_timer, .init_machine = lubbock_init, diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e81dd0c8e40..42a0c2b4128 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -768,6 +768,7 @@ MACHINE_START(MAGICIAN, "HTC Magician") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, .init_machine = magician_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5543c64da9e..c2a8717e463 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -628,6 +628,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .boot_params = 0xa0000100, /* BLOB boot parameter setting */ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, + .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, .timer = &pxa_timer, .init_machine = mainstone_init, diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 2190af06647..90b08ba8ad1 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pcm027_map_io, + .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = pcm027_init, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 55e8fcde014..c04e025cd79 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -469,6 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, .map_io = pxa_map_io, + .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, .timer = &pxa_timer, .init_machine = poodle_init, diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a654d1e6b38..62de07341cc 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -56,6 +56,8 @@ #include "devices.h" #include "generic.h" +#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8) + /* Bluetooth */ #define SG2_BT_RESET 81 @@ -1011,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .phys_io = 0x40000000, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = stargate2_init, diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 83cc3a18c2e..3a06e98b492 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -956,6 +956,7 @@ MACHINE_START(TOSA, "SHARP Tosa") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_tosa, .map_io = pxa_map_io, + .nr_irqs = TOSA_NR_IRQS, .init_irq = pxa25x_init_irq, .init_machine = tosa_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 03b9cb910e0..9da2b624ba2 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -904,6 +904,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc), .boot_params = 0xa0000100, .map_io = zeus_map_io, + .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, .timer = &pxa_timer, .init_machine = zeus_init, diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index c479cbecf78..2edad61539a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -415,6 +415,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .boot_params = 0xa0000100, .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = pxa_map_io, + .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, .timer = &pxa_timer, .init_machine = zylonite_init, -- cgit v1.2.3-70-g09d2