From 3cb5ee496ae99ee89e378d628b19cb5a904b1397 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 20:13:20 +0000 Subject: ARM: realview: switch Realview to use consolidated CLCD This switches Realview platforms to use the consolidated CLCD panel support, including the display capabilities. As Realview uses a PL111, it can support the full range of pixel formats - 444, 5551, 565 in both RGB and BGR mode. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.c | 214 +++++++----------------------------------- 1 file changed, 34 insertions(+), 180 deletions(-) (limited to 'arch/arm/mach-realview') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 1c6602cf50e..a18a5a66c4c 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -51,6 +51,7 @@ #include #include +#include #include #include "core.h" @@ -385,157 +386,6 @@ core_initcall(clk_init); #define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) #define SYS_CLCD_ID_VGA (0x1f << 8) -static struct clcd_panel vga = { - .mode = { - .name = "VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 39721, - .left_margin = 40, - .right_margin = 24, - .upper_margin = 32, - .lower_margin = 11, - .hsync_len = 96, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel xvga = { - .mode = { - .name = "XVGA", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15748, - .left_margin = 152, - .right_margin = 48, - .upper_margin = 23, - .lower_margin = 3, - .hsync_len = 104, - .vsync_len = 4, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_3_8_in = { - .mode = { - .name = "Sanyo QVGA", - .refresh = 116, - .xres = 320, - .yres = 240, - .pixclock = 100000, - .left_margin = 6, - .right_margin = 6, - .upper_margin = 5, - .lower_margin = 5, - .hsync_len = 6, - .vsync_len = 6, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel sanyo_2_5_in = { - .mode = { - .name = "Sanyo QVGA Portrait", - .refresh = 116, - .xres = 240, - .yres = 320, - .pixclock = 100000, - .left_margin = 20, - .right_margin = 10, - .upper_margin = 2, - .lower_margin = 2, - .hsync_len = 10, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -static struct clcd_panel epson_2_2_in = { - .mode = { - .name = "Epson QCIF", - .refresh = 390, - .xres = 176, - .yres = 220, - .pixclock = 62500, - .left_margin = 3, - .right_margin = 2, - .upper_margin = 1, - .lower_margin = 0, - .hsync_len = 3, - .vsync_len = 2, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = TIM2_BCD | TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1), - .bpp = 16, -}; - -/* - * Detect which LCD panel is connected, and return the appropriate - * clcd_panel structure. Note: we do not have any information on - * the required timings for the 8.4in panel, so we presently assume - * VGA timings. - */ -static struct clcd_panel *realview_clcd_panel(void) -{ - void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; - struct clcd_panel *vga_panel; - struct clcd_panel *panel; - u32 val; - - if (machine_is_realview_eb()) - vga_panel = &vga; - else - vga_panel = &xvga; - - val = readl(sys_clcd) & SYS_CLCD_ID_MASK; - if (val == SYS_CLCD_ID_SANYO_3_8) - panel = &sanyo_3_8_in; - else if (val == SYS_CLCD_ID_SANYO_2_5) - panel = &sanyo_2_5_in; - else if (val == SYS_CLCD_ID_EPSON_2_2) - panel = &epson_2_2_in; - else if (val == SYS_CLCD_ID_VGA) - panel = vga_panel; - else { - printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", - val); - panel = vga_panel; - } - - return panel; -} - /* * Disable all display connectors on the interface module. */ @@ -565,56 +415,60 @@ static void realview_clcd_enable(struct clcd_fb *fb) writel(val, sys_clcd); } +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ static int realview_clcd_setup(struct clcd_fb *fb) { + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + const char *panel_name, *vga_panel_name; unsigned long framesize; - dma_addr_t dma; + u32 val; - if (machine_is_realview_eb()) + if (machine_is_realview_eb()) { /* VGA, 16bpp */ framesize = 640 * 480 * 2; - else + vga_panel_name = "VGA"; + } else { /* XVGA, 16bpp */ framesize = 1024 * 768 * 2; - - fb->panel = realview_clcd_panel(); - - fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL | GFP_DMA); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; + vga_panel_name = "XVGA"; } - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = framesize; - - return 0; -} + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel_name = "Sanyo TM38QV67A02A"; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel_name = "Sanyo QVGA Portrait"; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel_name = "Epson L2F50113T00"; + else if (val == SYS_CLCD_ID_VGA) + panel_name = vga_panel_name; + else { + pr_err("CLCD: unknown LCD panel ID 0x%08x, using VGA\n", val); + panel_name = vga_panel_name; + } -static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_writecombine(&fb->dev->dev, vma, - fb->fb.screen_base, - fb->fb.fix.smem_start, - fb->fb.fix.smem_len); -} + fb->panel = versatile_clcd_get_panel(panel_name); + if (!fb->panel) + return -EINVAL; -static void realview_clcd_remove(struct clcd_fb *fb) -{ - dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, - fb->fb.screen_base, fb->fb.fix.smem_start); + return versatile_clcd_setup_dma(fb, framesize); } struct clcd_board clcd_plat_data = { .name = "RealView", + .caps = CLCD_CAP_ALL, .check = clcdfb_check, .decode = clcdfb_decode, .disable = realview_clcd_disable, .enable = realview_clcd_enable, .setup = realview_clcd_setup, - .mmap = realview_clcd_mmap, - .remove = realview_clcd_remove, + .mmap = versatile_clcd_mmap_dma, + .remove = versatile_clcd_remove_dma, }; #ifdef CONFIG_LEDS -- cgit v1.2.3-70-g09d2 From 631e55f966668d7a957342b38d7148643d919d73 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Jan 2011 13:05:01 +0000 Subject: ARM: realview: use new init_early for clock tree and sched_clock init Initialize the clock tree and our sched_clock() early. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.c | 19 ++++++------------- arch/arm/mach-realview/core.h | 1 + arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-realview/realview_pb1176.c | 1 + arch/arm/mach-realview/realview_pb11mp.c | 1 + arch/arm/mach-realview/realview_pba8.c | 1 + arch/arm/mach-realview/realview_pbx.c | 1 + 7 files changed, 12 insertions(+), 13 deletions(-) (limited to 'arch/arm/mach-realview') diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a18a5a66c4c..75dbc8791d0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -360,18 +360,19 @@ static struct clk_lookup lookups[] = { } }; -static int __init clk_init(void) +void __init realview_init_early(void) { + void __iomem *sys = __io_address(REALVIEW_SYS_BASE); + if (machine_is_realview_pb1176()) - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC0_OFFSET; else - oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET; + oscvco_clk.vcoreg = sys + REALVIEW_SYS_OSC4_OFFSET; clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - return 0; + versatile_sched_clock_init(sys + REALVIEW_SYS_24MHz_OFFSET, 24000000); } -core_initcall(clk_init); /* * CLCD support. @@ -509,12 +510,6 @@ void realview_leds_event(led_event_t ledevt) } #endif /* CONFIG_LEDS */ -/* - * The sched_clock counter - */ -#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \ - REALVIEW_SYS_24MHz_OFFSET) - /* * Where is the timer (VA)? */ @@ -530,8 +525,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; - versatile_sched_clock_init(REFCOUNTER, 24000000); - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 693239ddc39..27c92738708 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -63,6 +63,7 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_init_early(void); extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 6ef5c5e528b..c00e52754ef 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -487,6 +487,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_eb_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_eb_timer, .init_machine = realview_eb_init, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index cbdc97a5685..f0447bbf809 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -382,6 +382,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, .init_machine = realview_pb1176_init, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 8e8ab7d29a6..3b4f78870ac 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -384,6 +384,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, .init_machine = realview_pb11mp_init, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 841118e3e11..f98d4fa74e3 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -334,6 +334,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, .map_io = realview_pba8_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, .init_machine = realview_pba8_init, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 02b755b009d..b0521e1bb1a 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -417,6 +417,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, + .init_early = realview_init_early, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, .init_machine = realview_pbx_init, -- cgit v1.2.3-70-g09d2 From f093728c0ddc30bef5792b7faf2743024b166350 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Jan 2011 19:48:57 +0000 Subject: ARM: realview: remove old AMBA device DMA definitions The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA support makes no use of them either, so they can be removed. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.h | 1 - arch/arm/mach-realview/realview_eb.c | 21 --------------------- arch/arm/mach-realview/realview_pb1176.c | 21 --------------------- arch/arm/mach-realview/realview_pb11mp.c | 21 --------------------- arch/arm/mach-realview/realview_pba8.c | 21 --------------------- arch/arm/mach-realview/realview_pbx.c | 21 --------------------- 6 files changed, 106 deletions(-) (limited to 'arch/arm/mach-realview') diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 27c92738708..5c83d1e87a0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -42,7 +42,6 @@ static struct amba_device name##_device = { \ }, \ .dma_mask = ~0, \ .irq = base##_IRQ, \ - /* .dma = base##_DMA,*/ \ } struct machine_desc; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index c00e52754ef..d0f851b886d 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = { * These devices are connected via the core APB bridge */ #define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_EB_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } /* * These devices are connected directly to the multi-layer AHB switch */ #define EB_SMC_IRQ { NO_IRQ, NO_IRQ } -#define EB_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ } -#define EB_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ } -#define DMAC_DMA { 0, 0 } /* * These devices are connected via the core APB bridge */ #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ } -#define EB_WATCHDOG_DMA { 0, 0 } #define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ } -#define EB_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ } -#define EB_RTC_DMA { 0, 0 } /* * These devices are connected via the DMA APB bridge */ #define SCI_IRQ { IRQ_EB_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ } -#define EB_UART0_DMA { 15, 14 } #define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ } -#define EB_UART1_DMA { 13, 12 } #define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ } -#define EB_UART2_DMA { 11, 10 } #define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ } -#define EB_UART3_DMA { 0x86, 0x87 } #define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ } -#define EB_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index f0447bbf809..61f6a9d853f 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { * RealView PB1176 AMBA devices */ #define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB1176_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } -#define PB1176_CLCD_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } -#define PB1176_WATCHDOG_DMA { 0, 0 } #define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ } -#define PB1176_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ } -#define PB1176_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ } -#define PB1176_UART0_DMA { 15, 14 } #define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ } -#define PB1176_UART1_DMA { 13, 12 } #define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ } -#define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } -#define PB1176_UART3_DMA { 0x86, 0x87 } #define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } -#define PB1176_UART4_DMA { 0, 0 } #define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } -#define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 3b4f78870ac..27bfeca8912 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PB11MP_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ } -#define PB11MP_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ } -#define PB11MP_WATCHDOG_DMA { 0, 0 } #define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ } -#define PB11MP_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ } -#define PB11MP_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ } -#define PB11MP_UART0_DMA { 15, 14 } #define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ } -#define PB11MP_UART1_DMA { 13, 12 } #define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ } -#define PB11MP_UART2_DMA { 11, 10 } #define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ } -#define PB11MP_UART3_DMA { 0x86, 0x87 } #define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ } -#define PB11MP_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index f98d4fa74e3..11972df9431 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBA8_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ } -#define PBA8_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ } -#define PBA8_WATCHDOG_DMA { 0, 0 } #define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ } -#define PBA8_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ } -#define PBA8_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ } -#define PBA8_UART0_DMA { 15, 14 } #define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ } -#define PBA8_UART1_DMA { 13, 12 } #define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ } -#define PBA8_UART2_DMA { 11, 10 } #define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ } -#define PBA8_UART3_DMA { 0x86, 0x87 } #define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ } -#define PBA8_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index b0521e1bb1a..73ab3ca9355 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = { */ #define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ } -#define GPIO2_DMA { 0, 0 } #define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ } -#define GPIO3_DMA { 0, 0 } #define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ } -#define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B } -#define MMCI0_DMA { 0x84, 0 } #define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ } -#define KMI0_DMA { 0, 0 } #define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ } -#define KMI1_DMA { 0, 0 } #define PBX_SMC_IRQ { NO_IRQ, NO_IRQ } -#define PBX_SMC_DMA { 0, 0 } #define MPMC_IRQ { NO_IRQ, NO_IRQ } -#define MPMC_DMA { 0, 0 } #define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ } -#define PBX_CLCD_DMA { 0, 0 } #define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } -#define SCTL_DMA { 0, 0 } #define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ } -#define PBX_WATCHDOG_DMA { 0, 0 } #define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ } -#define PBX_GPIO0_DMA { 0, 0 } #define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ } -#define GPIO1_DMA { 0, 0 } #define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ } -#define PBX_RTC_DMA { 0, 0 } #define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ } -#define SCI_DMA { 7, 6 } #define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ } -#define PBX_UART0_DMA { 15, 14 } #define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ } -#define PBX_UART1_DMA { 13, 12 } #define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ } -#define PBX_UART2_DMA { 11, 10 } #define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ } -#define PBX_UART3_DMA { 0x86, 0x87 } #define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ } -#define PBX_SSP_DMA { 9, 8 } /* FPGA Primecells */ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); -- cgit v1.2.3-70-g09d2 From cdab142a80d859984eb5e3876e0e762b1f0bded9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 10:07:38 +0000 Subject: ARM: realview/vexpress: consolidate localtimer support Realview and Versatile Express local timer support is identical, so consolidate the implementations. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/Makefile | 1 - arch/arm/mach-realview/localtimer.c | 26 -------------------------- arch/arm/mach-vexpress/Makefile | 1 - arch/arm/mach-vexpress/localtimer.c | 26 -------------------------- arch/arm/plat-versatile/Makefile | 1 + arch/arm/plat-versatile/localtimer.c | 26 ++++++++++++++++++++++++++ 6 files changed, 27 insertions(+), 54 deletions(-) delete mode 100644 arch/arm/mach-realview/localtimer.c delete mode 100644 arch/arm/mach-vexpress/localtimer.c create mode 100644 arch/arm/plat-versatile/localtimer.c (limited to 'arch/arm/mach-realview') diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index a01b76b7c95..ba85e5290b7 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -10,4 +10,3 @@ obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c deleted file mode 100644 index 60b4e111f45..00000000000 --- a/arch/arm/mach-realview/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 2c0ac7de281..cfe344ec1d6 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,4 +6,3 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o diff --git a/arch/arm/mach-vexpress/localtimer.c b/arch/arm/mach-vexpress/localtimer.c deleted file mode 100644 index c0e3a59a0bf..00000000000 --- a/arch/arm/mach-vexpress/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * linux/arch/arm/mach-vexpress/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include - -#include -#include -#include - -/* - * Setup the local clock events for a CPU. - */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); -} diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 41f57f4b903..b511abb1019 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,4 +1,5 @@ obj-y := clock.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o diff --git a/arch/arm/plat-versatile/localtimer.c b/arch/arm/plat-versatile/localtimer.c new file mode 100644 index 00000000000..83ebee56933 --- /dev/null +++ b/arch/arm/plat-versatile/localtimer.c @@ -0,0 +1,26 @@ +/* + * linux/arch/arm/plat-versatile/localtimer.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include + +#include +#include +#include + +/* + * Setup the local clock events for a CPU. + */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + evt->irq = IRQ_LOCALTIMER; + twd_timer_setup(evt); +} -- cgit v1.2.3-70-g09d2 From 0462b4477ea3260304bbcd97c64c0b704b4f0f85 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 19 Jan 2011 10:24:56 +0000 Subject: ARM: realview/vexpress: consolidate SMP bringup code Realview and Versatile Express share the same SMP bringup code, so consolidate the two implementations. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/Makefile | 2 +- arch/arm/mach-realview/headsmp.S | 40 --------------- arch/arm/mach-realview/platsmp.c | 98 ++--------------------------------- arch/arm/mach-vexpress/Makefile | 2 +- arch/arm/mach-vexpress/headsmp.S | 40 --------------- arch/arm/mach-vexpress/platsmp.c | 94 +--------------------------------- arch/arm/plat-versatile/Makefile | 2 +- arch/arm/plat-versatile/headsmp.S | 40 +++++++++++++++ arch/arm/plat-versatile/platsmp.c | 104 ++++++++++++++++++++++++++++++++++++++ 9 files changed, 152 insertions(+), 270 deletions(-) delete mode 100644 arch/arm/mach-realview/headsmp.S delete mode 100644 arch/arm/mach-vexpress/headsmp.S create mode 100644 arch/arm/plat-versatile/headsmp.S create mode 100644 arch/arm/plat-versatile/platsmp.c (limited to 'arch/arm/mach-realview') diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index ba85e5290b7..541fa4c109e 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -8,5 +8,5 @@ obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S deleted file mode 100644 index b34be4554d4..00000000000 --- a/arch/arm/mach-realview/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-realview/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * Realview specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(realview_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 6959d13d908..23919229e12 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -10,44 +10,21 @@ */ #include #include -#include -#include -#include #include #include -#include #include #include +#include #include #include #include #include -#include #include "core.h" -extern void realview_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { @@ -62,75 +39,6 @@ static void __iomem *scu_base_addr(void) return (void __iomem *)0; } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -174,6 +82,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), + __raw_writel(BSYM(virt_to_phys(versatile_secondary_startup)), __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index cfe344ec1d6..90551b9780a 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -4,5 +4,5 @@ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S deleted file mode 100644 index 7a3f0632947..00000000000 --- a/arch/arm/mach-vexpress/headsmp.S +++ /dev/null @@ -1,40 +0,0 @@ -/* - * linux/arch/arm/mach-vexpress/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - __INIT - -/* - * Versatile Express specific entry point for secondary CPUs. This - * provides a "holding pen" into which all secondary cores are held - * until we're ready for them to initialise. - */ -ENTRY(vexpress_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #15 - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - add r6, r6, r4 -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - - .align -1: .long . - .long pen_release diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 634bf1d3a31..18927023c2c 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -10,13 +10,9 @@ */ #include #include -#include -#include -#include #include #include -#include #include #include @@ -26,99 +22,13 @@ #include "core.h" -extern void vexpress_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void __cpuinit write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); - outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); -} +extern void versatile_secondary_startup(void); static void __iomem *scu_base_addr(void) { return MMIO_P2V(A9_MPCORE_SCU); } -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - gic_secondary_init(0); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * Set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * This is really belt and braces; we hold unintended secondary - * CPUs in the holding pen until we're ready for them. However, - * since we haven't sent them a soft interrupt, they shouldn't - * be there. - */ - write_pen_release(cpu); - - /* - * Send the secondary CPU a soft interrupt, thereby causing - * the boot monitor to read the system wide flags register, - * and branch to the address found there. - */ - smp_cross_call(cpumask_of(cpu), 1); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - smp_rmb(); - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. @@ -163,6 +73,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * secondary CPU branches to this address. */ writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + writel(BSYM(virt_to_phys(versatile_secondary_startup)), MMIO_P2V(V2M_SYS_FLAGSSET)); } diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index b511abb1019..69714db47c3 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o - +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S new file mode 100644 index 00000000000..d397a1fb2f5 --- /dev/null +++ b/arch/arm/plat-versatile/headsmp.S @@ -0,0 +1,40 @@ +/* + * linux/arch/arm/plat-versatile/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + __INIT + +/* + * Realview/Versatile Express specific entry point for secondary CPUs. + * This provides a "holding pen" into which all secondary cores are held + * until we're ready for them to initialise. + */ +ENTRY(versatile_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + + .align +1: .long . + .long pen_release diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c new file mode 100644 index 00000000000..ba3d471d4bc --- /dev/null +++ b/arch/arm/plat-versatile/platsmp.c @@ -0,0 +1,104 @@ +/* + * linux/arch/arm/plat-versatile/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#include + +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + +/* + * Write pen_release in a way that is guaranteed to be visible to all + * observers, irrespective of whether they're taking part in coherency + * or not. This is necessary for the hotplug code to work reliably. + */ +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit platform_secondary_init(unsigned int cpu) +{ + /* + * if any interrupts are already enabled for the primary + * core (e.g. timer irq), then they will not have been enabled + * for us: do so + */ + gic_secondary_init(0); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * Set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * This is really belt and braces; we hold unintended secondary + * CPUs in the holding pen until we're ready for them. However, + * since we haven't sent them a soft interrupt, they shouldn't + * be there. + */ + write_pen_release(cpu); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * the boot monitor to read the system wide flags register, + * and branch to the address found there. + */ + smp_cross_call(cpumask_of(cpu), 1); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} -- cgit v1.2.3-70-g09d2