From c564e6ae6c5aa6e3995ff87ed4a32b4788ad5109 Mon Sep 17 00:00:00 2001 From: Daniel Silverstone Date: Fri, 13 Mar 2009 13:53:46 +0000 Subject: i2c-s3c2410: Simplify bus frequency calculation The platform data for the i2c-s3c2410 driver used to allow a min, max and desired frequency for the I2C bus. This patch reduces it to simply a desired frequency ceiling and corrects all the uses of the platform data appropriately. This means, for example, that on a system with a 66MHz fclk, a request for 100KHz will achieve 65KHz which is safe and acceptable, rather than 378KHz which it would have achieved without this change. Signed-off-by: Simtec Linux Team Signed-off-by: Daniel Silverstone [ben-linux@fluff.org: tidy subject and description] Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 3 +-- arch/arm/mach-s3c2410/mach-n30.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-s3c2410') diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 01bd76725b9..4389c160f7d 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -409,8 +409,7 @@ static struct platform_device bast_sio = { static struct s3c2410_platform_i2c __initdata bast_i2c_info = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 130*1000, + .frequency = 100*1000, }; /* Asix AX88796 10/100 ethernet controller */ diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 05a5e877b49..2b83f870771 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -340,8 +340,7 @@ static struct platform_device *n35_devices[] __initdata = { static struct s3c2410_platform_i2c n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, - .bus_freq = 10*1000, - .max_freq = 10*1000, + .frequency = 10*1000, }; /* Lots of hardcoded stuff, but it sets up the hardware in a useful -- cgit v1.2.3-70-g09d2