From b7c9705cb799adabc0ae430943843e6c6e82617d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:41:20 +0900 Subject: ARM: S3C64XX: Make s3c64xx_init_uarts() static Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/mach-s3c64xx') diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9..bee7dcd4df7 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } -- cgit v1.2.3-70-g09d2 From 5d3a21990c58b68a31dcbf4c378231781c53bfc1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:43:44 +0900 Subject: ARM: S3C6410: Use device names for both I2C clocks When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/clock.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/mach-s3c64xx') diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4ae..aebbcc291b4 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, -- cgit v1.2.3-70-g09d2