From 4b91b6fb8646843d96628ae9512d8c4cd33ece2d Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 25 Oct 2011 02:01:27 +0000 Subject: arm/tegra: Don't create duplicate gpio and pinmux devices *_pinmux_init() register the GPIO and pinmux devices so that they're ready before any other device needs them. *_pinmux_init() are also called by board-dt.c in order to set up the GPIO and pinmux configurations. In this case, if we register the devices, they end up being probed once due to this registration, and a second time due to a device-tree node (or vice-versa). The second probe fails since the memory regions are already requested. Besides, we don't actually want the duplicated devices. To avoid this duplicate registration, modify *_pinmux_init() to check whether it's running on a DT machine. If not, register the pinmux devices. If so, don't register them. Finally, modify board-dt.c to call the *_pinmux_init() after all devices have been instantiated from device-tree. This allows the GPIO and pinmux devices to be instantiated and initialized before calling functions to configure the hardware. This has one disadvantage: The pinmux and GPIO initialization now happens after /all/ devices are instantiated, rather than after just gpio and pinmux but before anything else. So the correct HW configuration is not in place when e.g. the SD/MMC device is probed. Long-term, this should be solved by doing both: a) Initializing the HW state from DT nodes during GPIO and pinmux device probe. b) Using the deferred driver probe mechanism, so that drivers can defer their probe until after the gpio and pinmux drivers have probed. v2: s/int is_dt/bool is_dt/ v3: Use of_machine_is_compatible inside *_pinmux_init() rather than passing an explicit parameter into the function from outside. Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/mach-tegra/board-dt.c | 13 +++++++------ arch/arm/mach-tegra/board-harmony-pinmux.c | 6 +++++- arch/arm/mach-tegra/board-paz00-pinmux.c | 6 +++++- arch/arm/mach-tegra/board-seaboard-pinmux.c | 5 ++++- arch/arm/mach-tegra/board-trimslice-pinmux.c | 5 ++++- 5 files changed, 25 insertions(+), 10 deletions(-) (limited to 'arch/arm/mach-tegra') diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c index d368f8dafcf..74743ad3d2d 100644 --- a/arch/arm/mach-tegra/board-dt.c +++ b/arch/arm/mach-tegra/board-dt.c @@ -101,6 +101,13 @@ static void __init tegra_dt_init(void) tegra_clk_init_from_table(tegra_dt_clk_init_table); + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, tegra_dt_match_table, + tegra20_auxdata_lookup, NULL); + for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) { if (of_machine_is_compatible(pinmux_configs[i].machine)) { pinmux_configs[i].init(); @@ -110,12 +117,6 @@ static void __init tegra_dt_init(void) WARN(i == ARRAY_SIZE(pinmux_configs), "Unknown platform! Pinmuxing not initialized\n"); - - /* - * Finished with the static registrations now; fill in the missing - * devices - */ - of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL); } static const char * tegra_dt_board_compat[] = { diff --git a/arch/arm/mach-tegra/board-harmony-pinmux.c b/arch/arm/mach-tegra/board-harmony-pinmux.c index e99b45618cd..7a4a26d5174 100644 --- a/arch/arm/mach-tegra/board-harmony-pinmux.c +++ b/arch/arm/mach-tegra/board-harmony-pinmux.c @@ -16,6 +16,8 @@ #include #include +#include + #include #include "gpio-names.h" @@ -161,7 +163,9 @@ static struct tegra_gpio_table gpio_table[] = { void harmony_pinmux_init(void) { - platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(pinmux_devices, + ARRAY_SIZE(pinmux_devices)); tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux)); diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index fb20894862b..be30e215f4b 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -16,6 +16,8 @@ #include #include +#include + #include #include "gpio-names.h" @@ -158,7 +160,9 @@ static struct tegra_gpio_table gpio_table[] = { void paz00_pinmux_init(void) { - platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(pinmux_devices, + ARRAY_SIZE(pinmux_devices)); tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux)); diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index fbce31daa3c..eb5991dbe24 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -218,7 +219,9 @@ static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size) void __init seaboard_common_pinmux_init(void) { - platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(pinmux_devices, + ARRAY_SIZE(pinmux_devices)); tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux)); diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 4969dd28a04..7ab719d46da 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -16,6 +16,7 @@ #include #include #include +#include #include @@ -157,7 +158,9 @@ static struct tegra_gpio_table gpio_table[] = { void __init trimslice_pinmux_init(void) { - platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices)); + if (!of_machine_is_compatible("nvidia,tegra20")) + platform_add_devices(pinmux_devices, + ARRAY_SIZE(pinmux_devices)); tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux)); tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table)); } -- cgit v1.2.3-70-g09d2 From 686448d7a253f9db836f4f44c6624461570e5026 Mon Sep 17 00:00:00 2001 From: Yufeng Shen Date: Fri, 28 Oct 2011 06:27:06 +0000 Subject: arm/tegra: enable headphone detection gpio on seaboard Enable the headphone detection gpio on tegra platform. Signed-off-by: Yufeng Shen Acked-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/mach-tegra/board-seaboard-pinmux.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/mach-tegra') diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c index eb5991dbe24..b1c2972f62f 100644 --- a/arch/arm/mach-tegra/board-seaboard-pinmux.c +++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c @@ -192,6 +192,7 @@ static struct tegra_gpio_table common_gpio_table[] = { { .gpio = TEGRA_GPIO_SD2_POWER, .enable = true }, { .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true }, { .gpio = TEGRA_GPIO_POWERKEY, .enable = true }, + { .gpio = TEGRA_GPIO_HP_DET, .enable = true }, { .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true }, { .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true }, { .gpio = TEGRA_GPIO_USB1, .enable = true }, -- cgit v1.2.3-70-g09d2 From afed2a261825e83cf9564dec60961e8aba6dc701 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 10:23:45 +0100 Subject: ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER Convert the tegra2 platforms to be using the gic_handle_irq function as their primary interrupt handler. Tested on harmony. Cc: Colin Cross Acked-by: Stephen Warren Acked-by: Olof Johansson Signed-off-by: Marc Zyngier --- arch/arm/mach-tegra/Kconfig | 1 + arch/arm/mach-tegra/board-dt.c | 2 ++ arch/arm/mach-tegra/board-harmony.c | 2 ++ arch/arm/mach-tegra/board-paz00.c | 2 ++ arch/arm/mach-tegra/board-seaboard.c | 4 ++++ arch/arm/mach-tegra/board-trimslice.c | 2 ++ arch/arm/mach-tegra/include/mach/entry-macro.S | 22 ++-------------------- 7 files changed, 15 insertions(+), 20 deletions(-) (limited to 'arch/arm/mach-tegra') diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 91aff7cb828..a6faa503350 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -13,6 +13,7 @@ config ARCH_TEGRA_2x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT + select MULTI_IRQ_HANDLER help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c index 74743ad3d2d..f6f03ce340f 100644 --- a/arch/arm/mach-tegra/board-dt.c +++ b/arch/arm/mach-tegra/board-dt.c @@ -32,6 +32,7 @@ #include #include +#include #include #include #include @@ -130,6 +131,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_dt_init, .dt_compat = tegra_dt_board_compat, diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index f0bdc5e3fe5..fd190a8dc66 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -187,6 +188,7 @@ MACHINE_START(HARMONY, "harmony") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_harmony_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 55c55ba89f1..0b7e1cfee70 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -29,6 +29,7 @@ #include #include +#include #include #include #include @@ -190,6 +191,7 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_paz00_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index bf13ea355ef..7328379b135 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -34,6 +34,7 @@ #include #include +#include #include "board.h" #include "board-seaboard.h" @@ -284,6 +285,7 @@ MACHINE_START(SEABOARD, "seaboard") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_seaboard_init, MACHINE_END @@ -293,6 +295,7 @@ MACHINE_START(KAEN, "kaen") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_kaen_init, MACHINE_END @@ -302,6 +305,7 @@ MACHINE_START(WARIO, "wario") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_wario_init, MACHINE_END diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index 1a6617b7806..60a36a2e0be 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include @@ -176,6 +177,7 @@ MACHINE_START(TRIMSLICE, "trimslice") .map_io = tegra_map_common_io, .init_early = tegra_init_early, .init_irq = tegra_init_irq, + .handle_irq = gic_handle_irq, .timer = &tegra_timer, .init_machine = tegra_trimslice_init, MACHINE_END diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S index dd165c53889..ac11262149c 100644 --- a/arch/arm/mach-tegra/include/mach/entry-macro.S +++ b/arch/arm/mach-tegra/include/mach/entry-macro.S @@ -12,30 +12,15 @@ * GNU General Public License for more details. * */ -#include -#include - -#if defined(CONFIG_ARM_GIC) -#define HAVE_GET_IRQNR_PREAMBLE -#include - - /* Uses the GIC interrupt controller built into the cpu */ -#define ICTRL_BASE (IO_CPU_VIRT + 0x100) .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - movw \base, #(ICTRL_BASE & 0x0000ffff) - movt \base, #((ICTRL_BASE & 0xffff0000) >> 16) + .macro arch_ret_to_user, tmp1, tmp2 .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm -#else +#if !defined(CONFIG_ARM_GIC) /* legacy interrupt controller for AP16 */ - .macro disable_fiq - .endm .macro get_irqnr_preamble, base, tmp @ enable imprecise aborts @@ -46,9 +31,6 @@ orr \base, #0x0000f000 .endm - .macro arch_ret_to_user, tmp1, tmp2 - .endm - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS cmp \irqnr, #0x80 -- cgit v1.2.3-70-g09d2 From 08d33b27f7063ba2b4a29f9e3a2dcb65f30dec0b Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 6 Sep 2011 13:27:10 +0100 Subject: ARM: GIC: Make MULTI_IRQ_HANDLER mandatory Now that MULTI_IRQ_HANDLER is selected by all the in-tree GIC users, make it mandatory and remove the unused macros. Signed-off-by: Marc Zyngier --- arch/arm/Kconfig | 6 --- arch/arm/common/Kconfig | 1 + arch/arm/common/gic.c | 4 -- arch/arm/include/asm/hardware/entry-macro-gic.S | 60 ------------------------- arch/arm/include/asm/hardware/gic.h | 1 - arch/arm/mach-msm/Kconfig | 2 - arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-tegra/Kconfig | 1 - arch/arm/mach-ux500/Kconfig | 1 - arch/arm/plat-omap/Kconfig | 1 - 10 files changed, 2 insertions(+), 76 deletions(-) delete mode 100644 arch/arm/include/asm/hardware/entry-macro-gic.S (limited to 'arch/arm/mach-tegra') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d99ee9ba232..44789eff983 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -278,7 +278,6 @@ config ARCH_REALVIEW select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB select NEED_MACH_MEMORY_H - select MULTI_IRQ_HANDLER help This enables support for ARM Ltd RealView boards. @@ -311,7 +310,6 @@ config ARCH_VEXPRESS select ICST select PLAT_VERSATILE select PLAT_VERSATILE_CLCD - select MULTI_IRQ_HANDLER help This enables support for the ARM Ltd Versatile Express boards. @@ -347,7 +345,6 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select USE_OF - select MULTI_IRQ_HANDLER help Support for the Calxeda Highbank SoC based boards. @@ -366,7 +363,6 @@ config ARCH_CNS3XXX select ARM_GIC select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI - select MULTI_IRQ_HANDLER help Support for Cavium Networks CNS3XXX platform. @@ -855,7 +851,6 @@ config ARCH_EXYNOS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select NEED_MACH_MEMORY_H - select MULTI_IRQ_HANDLER help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) @@ -979,7 +974,6 @@ config ARCH_ZYNQ select ARM_AMBA select ICST select USE_OF - select MULTI_IRQ_HANDLER help Support for Xilinx Zynq ARM Cortex A9 Platform endchoice diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index a3beda1213d..a11cee523cd 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,5 +1,6 @@ config ARM_GIC select IRQ_DOMAIN + select MULTI_IRQ_HANDLER bool config GIC_NON_BANKED diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3c78b7c6069..a1feb6b4f9f 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -71,9 +71,6 @@ struct gic_chip_data { static DEFINE_RAW_SPINLOCK(irq_controller_lock); -/* Address of GIC 0 CPU interface */ -void __iomem *gic_cpu_base_addr __read_mostly; - /* * Supported arch specific GIC irq extension. * Default make them NULL. @@ -700,7 +697,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start, * For secondary GICs, skip over PPIs, too. */ if (gic_nr == 0) { - gic_cpu_base_addr = cpu_base; domain->hwirq_base = 16; if (irq_start > 0) irq_start = (irq_start & ~31) + 16; diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S deleted file mode 100644 index 74ebc803904..00000000000 --- a/arch/arm/include/asm/hardware/entry-macro-gic.S +++ /dev/null @@ -1,60 +0,0 @@ -/* - * arch/arm/include/asm/hardware/entry-macro-gic.S - * - * Low-level IRQ helper macros for GIC - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include - -#ifndef HAVE_GET_IRQNR_PREAMBLE - .macro get_irqnr_preamble, base, tmp - ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - .endm -#endif - -/* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] - /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - .endm - -/* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index ecf7c02fa16..4bdfe001869 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,6 @@ #include struct device_node; -extern void __iomem *gic_cpu_base_addr; extern struct irq_chip gic_arch_extn; void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *, diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index ba36b74881c..ebde97f5d5f 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -50,7 +50,6 @@ config ARCH_MSM8X60 select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP - select MULTI_IRQ_HANDLER config ARCH_MSM8960 bool "MSM8960" @@ -61,7 +60,6 @@ config ARCH_MSM8960 select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP - select MULTI_IRQ_HANDLER endchoice diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 9a6d8187342..22f7c97a272 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -37,6 +37,7 @@ config ARCH_OMAP3 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM + select MULTI_IRQ_HANDLER config ARCH_OMAP4 bool "TI OMAP4" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index a6faa503350..91aff7cb828 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -13,7 +13,6 @@ config ARCH_TEGRA_2x_SOC select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_SUPPORT select USB_ULPI_VIEWPORT if USB_SUPPORT - select MULTI_IRQ_HANDLER help Support for NVIDIA Tegra AP20 and T20 processors, based on the ARM CortexA9MP CPU and the ARM PL310 L2 cache controller diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index bb2b52b0390..a3e0c8692f0 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,7 +7,6 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 - select MULTI_IRQ_HANDLER menu "Ux500 SoC" diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 4a1cc589168..aa59f4247dc 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -24,7 +24,6 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER - select MULTI_IRQ_HANDLER help "Systems based on OMAP2, OMAP3 or OMAP4" -- cgit v1.2.3-70-g09d2