From e3e92a7be6936dff1de80e66b0b683d54e9e02d8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 28 Jan 2013 21:58:22 +0100 Subject: ARM: 7635/1: versatile: fix the PCI IRQ regression The PCI IRQs were regressing due to two things: - The PCI glue layer was using an hard-coded IRQ 27 offset. This caused the immediate regression. - The SIC IRQ mask was inverted (i.e. a bit was indeed set to one for each valid IRQ on the SIC, but accidentally inverted in the init call). This has been around forever, but we have been saved by some other forgiving code that would reserve IRQ descriptors in this range, as the versatile is non-sparse. When the IRQs were bumped up 32 steps so as to avoid using IRQ zero and avoid touching the 16 legacy IRQs, things broke. Introduce an explicit valid mask for the IRQs that are active on the PIC/SIC, and pass that. Use the BIT() macro from to make sure we hit the right bits, readily defined in . Reported-by: Tetsuo Handa Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 15 ++++++++++++++- arch/arm/mach-versatile/pci.c | 11 ++++++----- 2 files changed, 20 insertions(+), 6 deletions(-) (limited to 'arch/arm/mach-versatile') diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 5d592945036..a78827b7027 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -65,16 +66,28 @@ #define VA_VIC_BASE __io_address(VERSATILE_VIC_BASE) #define VA_SIC_BASE __io_address(VERSATILE_SIC_BASE) +/* These PIC IRQs are valid in each configuration */ +#define PIC_VALID_ALL BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \ + BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \ + BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \ + BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \ + BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \ + BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \ + BIT(SIC_INT_PCI3) #if 1 #define IRQ_MMCI0A IRQ_VICSOURCE22 #define IRQ_AACI IRQ_VICSOURCE24 #define IRQ_ETH IRQ_VICSOURCE25 #define PIC_MASK 0xFFD00000 +#define PIC_VALID PIC_VALID_ALL #else #define IRQ_MMCI0A IRQ_SIC_MMCI0A #define IRQ_AACI IRQ_SIC_AACI #define IRQ_ETH IRQ_SIC_ETH #define PIC_MASK 0 +#define PIC_VALID PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \ + BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \ + BIT(SIC_INT_ETH) #endif /* Lookup table for finding a DT node that represents the vic instance */ @@ -102,7 +115,7 @@ void __init versatile_init_irq(void) VERSATILE_SIC_BASE); fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_VICSOURCE31, ~PIC_MASK, np); + IRQ_VICSOURCE31, PIC_VALID, np); /* * Interrupts on secondary controller from 0 to 8 are routed to diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 2f84f4094f1..e92e5e0705b 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -327,12 +328,12 @@ static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) int irq; /* slot, pin, irq - * 24 1 27 - * 25 1 28 - * 26 1 29 - * 27 1 30 + * 24 1 IRQ_SIC_PCI0 + * 25 1 IRQ_SIC_PCI1 + * 26 1 IRQ_SIC_PCI2 + * 27 1 IRQ_SIC_PCI3 */ - irq = 27 + ((slot - 24 + pin - 1) & 3); + irq = IRQ_SIC_PCI0 + ((slot - 24 + pin - 1) & 3); return irq; } -- cgit v1.2.3-70-g09d2