From de8e71ca4f2e17329f6718ae88d5c8336cb249ee Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 27 Aug 2011 22:39:09 +0100 Subject: ARM: pm: only use preallocated page table during resume Only use the preallocated page table during the resume, not while suspending. This avoids the overhead of having to switch unnecessarily to the resume page table in the suspend path. Tested-by: Santosh Shilimkar Tested-by: Shawn Guo Tested-by: Lorenzo Pieralisi Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'arch/arm/mm/proc-v7.S') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 21d6910d220..b56004f90d9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -217,22 +217,21 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 9 +.equ cpu_v7_suspend_size, 4 * 8 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) - stmfd sp!, {r4 - r11, lr} + stmfd sp!, {r4 - r10, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 1 @ Context ID mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID stmia r0!, {r4 - r6} mrc p15, 0, r6, c3, c0, 0 @ Domain ID - mrc p15, 0, r7, c2, c0, 0 @ TTB 0 - mrc p15, 0, r8, c2, c0, 1 @ TTB 1 - mrc p15, 0, r9, c1, c0, 0 @ Control register - mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register - mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r6 - r11} - ldmfd sp!, {r4 - r11, pc} + mrc p15, 0, r7, c2, c0, 1 @ TTB 1 + mrc p15, 0, r8, c1, c0, 0 @ Control register + mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control + stmia r0, {r6 - r10} + ldmfd sp!, {r4 - r10, pc} ENDPROC(cpu_v7_do_suspend) ENTRY(cpu_v7_do_resume) @@ -243,22 +242,24 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 1 @ Context ID mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID - ldmia r0, {r6 - r11} + ldmia r0, {r6 - r10} mcr p15, 0, r6, c3, c0, 0 @ Domain ID - mcr p15, 0, r7, c2, c0, 0 @ TTB 0 - mcr p15, 0, r8, c2, c0, 1 @ TTB 1 + ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP) + ALT_UP(orr r1, r1, #TTB_FLAGS_UP) + mcr p15, 0, r1, c2, c0, 0 @ TTB 0 + mcr p15, 0, r7, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register - teq r4, r10 @ Is it already set? - mcrne p15, 0, r10, c1, c0, 1 @ No, so write it - mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control + teq r4, r9 @ Is it already set? + mcrne p15, 0, r9, c1, c0, 1 @ No, so write it + mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb dsb - mov r0, r9 @ control register + mov r0, r8 @ control register b cpu_resume_mmu ENDPROC(cpu_v7_do_resume) #endif -- cgit v1.2.3-70-g09d2