From d109167b9c1002770d194644d5580a1f3588f7fc Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 10 Jun 2010 15:11:13 +0200 Subject: ARM: imx: rename mach dir for mx21 and mx27 to mach-imx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Finally all imx code should end up there, start with mach-mx2. While touching all files rename some files to use a hyphen instead of an underscore. Signed-off-by: Uwe Kleine-König --- arch/arm/plat-mxc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 7f7ad6f289b..4974fcc0673 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -49,7 +49,7 @@ config ARCH_MX5 endchoice source "arch/arm/mach-mx1/Kconfig" -source "arch/arm/mach-mx2/Kconfig" +source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" source "arch/arm/mach-mxc91231/Kconfig" -- cgit v1.2.3-70-g09d2 From 074694956b547de9a6b85b919c0bb13853b88c2d Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 14 Jun 2010 15:56:58 +0200 Subject: ARM: imx: move mx1 support to mach-imx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König --- arch/arm/Makefile | 2 +- arch/arm/mach-imx/Kconfig | 19 + arch/arm/mach-imx/Makefile | 8 + arch/arm/mach-imx/Makefile.boot | 4 + arch/arm/mach-imx/clock-imx1.c | 636 ++++++++++++++++++++++++++++++++ arch/arm/mach-imx/devices.c | 197 ++++++++++ arch/arm/mach-imx/devices.h | 12 + arch/arm/mach-imx/mach-mx1ads.c | 165 +++++++++ arch/arm/mach-imx/mach-scb9328.c | 157 ++++++++ arch/arm/mach-imx/mm-imx1.c | 55 +++ arch/arm/mach-imx/mx1-camera-fiq-ksym.c | 18 + arch/arm/mach-imx/mx1-camera-fiq.S | 35 ++ arch/arm/mach-mx1/Kconfig | 19 - arch/arm/mach-mx1/Makefile | 14 - arch/arm/mach-mx1/Makefile.boot | 4 - arch/arm/mach-mx1/clock.c | 636 -------------------------------- arch/arm/mach-mx1/devices.c | 220 ----------- arch/arm/mach-mx1/devices.h | 7 - arch/arm/mach-mx1/generic.c | 55 --- arch/arm/mach-mx1/ksym_mx1.c | 18 - arch/arm/mach-mx1/mach-mx1ads.c | 165 --------- arch/arm/mach-mx1/mach-scb9328.c | 157 -------- arch/arm/mach-mx1/mx1_camera_fiq.S | 35 -- arch/arm/plat-mxc/Kconfig | 1 - 24 files changed, 1307 insertions(+), 1332 deletions(-) create mode 100644 arch/arm/mach-imx/clock-imx1.c create mode 100644 arch/arm/mach-imx/mach-mx1ads.c create mode 100644 arch/arm/mach-imx/mach-scb9328.c create mode 100644 arch/arm/mach-imx/mm-imx1.c create mode 100644 arch/arm/mach-imx/mx1-camera-fiq-ksym.c create mode 100644 arch/arm/mach-imx/mx1-camera-fiq.S delete mode 100644 arch/arm/mach-mx1/Kconfig delete mode 100644 arch/arm/mach-mx1/Makefile delete mode 100644 arch/arm/mach-mx1/Makefile.boot delete mode 100644 arch/arm/mach-mx1/clock.c delete mode 100644 arch/arm/mach-mx1/devices.c delete mode 100644 arch/arm/mach-mx1/devices.h delete mode 100644 arch/arm/mach-mx1/generic.c delete mode 100644 arch/arm/mach-mx1/ksym_mx1.c delete mode 100644 arch/arm/mach-mx1/mach-mx1ads.c delete mode 100644 arch/arm/mach-mx1/mach-scb9328.c delete mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c60d604b2ef..ad81ece7f82 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -145,7 +145,7 @@ machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 -machine-$(CONFIG_ARCH_MX1) := mx1 +machine-$(CONFIG_ARCH_MX1) := imx machine-$(CONFIG_ARCH_MX2) := imx machine-$(CONFIG_ARCH_MX25) := mx25 machine-$(CONFIG_ARCH_MX3) := mx3 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 742fd4e6dcb..c6eddd7f68c 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,3 +1,22 @@ +if ARCH_MX1 + +comment "MX1 platforms:" +config MACH_MXLADS + bool + +config ARCH_MX1ADS + bool "MX1ADS platform" + select MACH_MXLADS + help + Say Y here if you are using Motorola MX1ADS/MXLADS boards + +config MACH_SCB9328 + bool "Synertronixx scb9328" + help + Say Y here if you are using a Synertronixx scb9328 board + +endif + if ARCH_MX2 choice diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9d57ba65d97..e56a1191c9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -6,12 +6,20 @@ obj-y := devices.o +obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o obj-$(CONFIG_MACH_MX27) += cpu-imx27.o obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o +# Support for CMOS sensor interface +obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o + +obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o +obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o + obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o + obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index e867398a8fd..7988a85cf07 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,3 +1,7 @@ +zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000 +params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 +initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 + zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000 params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c new file mode 100644 index 00000000000..c05096c3830 --- /dev/null +++ b/arch/arm/mach-imx/clock-imx1.c @@ -0,0 +1,636 @@ +/* + * Copyright (C) 2008 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) + +/* CCM register addresses */ +#define CCM_CSCR IO_ADDR_CCM(0x0) +#define CCM_MPCTL0 IO_ADDR_CCM(0x4) +#define CCM_SPCTL0 IO_ADDR_CCM(0xc) +#define CCM_PCDR IO_ADDR_CCM(0x20) + +#define CCM_CSCR_CLKO_OFFSET 29 +#define CCM_CSCR_CLKO_MASK (0x7 << 29) +#define CCM_CSCR_USB_OFFSET 26 +#define CCM_CSCR_USB_MASK (0x7 << 26) +#define CCM_CSCR_OSC_EN_SHIFT 17 +#define CCM_CSCR_SYSTEM_SEL (1 << 16) +#define CCM_CSCR_BCLK_OFFSET 10 +#define CCM_CSCR_BCLK_MASK (0xf << 10) +#define CCM_CSCR_PRESC (1 << 15) + +#define CCM_PCDR_PCLK3_OFFSET 16 +#define CCM_PCDR_PCLK3_MASK (0x7f << 16) +#define CCM_PCDR_PCLK2_OFFSET 4 +#define CCM_PCDR_PCLK2_MASK (0xf << 4) +#define CCM_PCDR_PCLK1_OFFSET 0 +#define CCM_PCDR_PCLK1_MASK 0xf + +#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off))) + +/* SCM register addresses */ +#define SCM_GCCR IO_ADDR_SCM(0xc) + +#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 +#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 +#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 +#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 + +static int _clk_enable(struct clk *clk) +{ + unsigned int reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + unsigned int reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size, + struct clk *parent) +{ + int i; + + for (i = 0; i < size; i++) + if (parent == clk_arr[i]) + return i; + + return -EINVAL; +} + +static unsigned long +_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit) +{ + int div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > limit) + div = limit; + + return parent_rate / div; +} + +static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->round_rate(clk->parent, rate); +} + +static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->set_rate(clk->parent, rate); +} + +static unsigned long clk16m_get_rate(struct clk *clk) +{ + return 16000000; +} + +static struct clk clk16m = { + .get_rate = clk16m_get_rate, + .enable = _clk_enable, + .enable_reg = CCM_CSCR, + .enable_shift = CCM_CSCR_OSC_EN_SHIFT, + .disable = _clk_disable, +}; + +/* in Hz */ +static unsigned long clk32_rate; + +static unsigned long clk32_get_rate(struct clk *clk) +{ + return clk32_rate; +} + +static struct clk clk32 = { + .get_rate = clk32_get_rate, +}; + +static unsigned long clk32_premult_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) * 512; +} + +static struct clk clk32_premult = { + .parent = &clk32, + .get_rate = clk32_premult_get_rate, +}; + +static const struct clk *prem_clk_clocks[] = { + &clk32_premult, + &clk16m, +}; + +static int prem_clk_set_parent(struct clk *clk, struct clk *parent) +{ + int i; + unsigned int reg = __raw_readl(CCM_CSCR); + + i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks), + parent); + + switch (i) { + case 0: + reg &= ~CCM_CSCR_SYSTEM_SEL; + break; + case 1: + reg |= CCM_CSCR_SYSTEM_SEL; + break; + default: + return i; + } + + __raw_writel(reg, CCM_CSCR); + + return 0; +} + +static struct clk prem_clk = { + .set_parent = prem_clk_set_parent, +}; + +static unsigned long system_clk_get_rate(struct clk *clk) +{ + return mxc_decode_pll(__raw_readl(CCM_SPCTL0), + clk_get_rate(clk->parent)); +} + +static struct clk system_clk = { + .parent = &prem_clk, + .get_rate = system_clk_get_rate, +}; + +static unsigned long mcu_clk_get_rate(struct clk *clk) +{ + return mxc_decode_pll(__raw_readl(CCM_MPCTL0), + clk_get_rate(clk->parent)); +} + +static struct clk mcu_clk = { + .parent = &clk32_premult, + .get_rate = mcu_clk_get_rate, +}; + +static unsigned long fclk_get_rate(struct clk *clk) +{ + unsigned long fclk = clk_get_rate(clk->parent); + + if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC) + fclk /= 2; + + return fclk; +} + +static struct clk fclk = { + .parent = &mcu_clk, + .get_rate = fclk_get_rate, +}; + +/* + * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) + */ +static unsigned long hclk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) & + CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1); +} + +static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate) +{ + return _clk_simple_round_rate(clk, rate, 16); +} + +static int hclk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + unsigned int reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 16 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_CSCR); + reg &= ~CCM_CSCR_BCLK_MASK; + reg |= div << CCM_CSCR_BCLK_OFFSET; + __raw_writel(reg, CCM_CSCR); + + return 0; +} + +static struct clk hclk = { + .parent = &system_clk, + .get_rate = hclk_get_rate, + .round_rate = hclk_round_rate, + .set_rate = hclk_set_rate, +}; + +static unsigned long clk48m_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) & + CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1); +} + +static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate) +{ + return _clk_simple_round_rate(clk, rate, 8); +} + +static int clk48m_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + unsigned int reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_CSCR); + reg &= ~CCM_CSCR_USB_MASK; + reg |= div << CCM_CSCR_USB_OFFSET; + __raw_writel(reg, CCM_CSCR); + + return 0; +} + +static struct clk clk48m = { + .parent = &system_clk, + .get_rate = clk48m_get_rate, + .round_rate = clk48m_round_rate, + .set_rate = clk48m_set_rate, +}; + +/* + * get peripheral clock 1 ( UART[12], Timer[12], PWM ) + */ +static unsigned long perclk1_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & + CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1); +} + +static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate) +{ + return _clk_simple_round_rate(clk, rate, 16); +} + +static int perclk1_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + unsigned int reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 16 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_PCDR); + reg &= ~CCM_PCDR_PCLK1_MASK; + reg |= div << CCM_PCDR_PCLK1_OFFSET; + __raw_writel(reg, CCM_PCDR); + + return 0; +} + +/* + * get peripheral clock 2 ( LCD, SD, SPI[12] ) + */ +static unsigned long perclk2_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & + CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1); +} + +static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate) +{ + return _clk_simple_round_rate(clk, rate, 16); +} + +static int perclk2_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + unsigned int reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 16 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_PCDR); + reg &= ~CCM_PCDR_PCLK2_MASK; + reg |= div << CCM_PCDR_PCLK2_OFFSET; + __raw_writel(reg, CCM_PCDR); + + return 0; +} + +/* + * get peripheral clock 3 ( SSI ) + */ +static unsigned long perclk3_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & + CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1); +} + +static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate) +{ + return _clk_simple_round_rate(clk, rate, 128); +} + +static int perclk3_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + unsigned int reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 128 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_PCDR); + reg &= ~CCM_PCDR_PCLK3_MASK; + reg |= div << CCM_PCDR_PCLK3_OFFSET; + __raw_writel(reg, CCM_PCDR); + + return 0; +} + +static struct clk perclk[] = { + { + .id = 0, + .parent = &system_clk, + .get_rate = perclk1_get_rate, + .round_rate = perclk1_round_rate, + .set_rate = perclk1_set_rate, + }, { + .id = 1, + .parent = &system_clk, + .get_rate = perclk2_get_rate, + .round_rate = perclk2_round_rate, + .set_rate = perclk2_set_rate, + }, { + .id = 2, + .parent = &system_clk, + .get_rate = perclk3_get_rate, + .round_rate = perclk3_round_rate, + .set_rate = perclk3_set_rate, + } +}; + +static const struct clk *clko_clocks[] = { + &perclk[0], + &hclk, + &clk48m, + &clk16m, + &prem_clk, + &fclk, +}; + +static int clko_set_parent(struct clk *clk, struct clk *parent) +{ + int i; + unsigned int reg; + + i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent); + if (i < 0) + return i; + + reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK; + reg |= i << CCM_CSCR_CLKO_OFFSET; + __raw_writel(reg, CCM_CSCR); + + if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) { + clk->set_rate = _clk_parent_set_rate; + clk->round_rate = _clk_parent_round_rate; + } else { + clk->set_rate = NULL; + clk->round_rate = NULL; + } + + return 0; +} + +static struct clk clko_clk = { + .set_parent = clko_set_parent, +}; + +static struct clk dma_clk = { + .parent = &hclk, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + .enable = _clk_enable, + .enable_reg = SCM_GCCR, + .enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET, + .disable = _clk_disable, +}; + +static struct clk csi_clk = { + .parent = &hclk, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + .enable = _clk_enable, + .enable_reg = SCM_GCCR, + .enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mma_clk = { + .parent = &hclk, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + .enable = _clk_enable, + .enable_reg = SCM_GCCR, + .enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET, + .disable = _clk_disable, +}; + +static struct clk usbd_clk = { + .parent = &clk48m, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + .enable = _clk_enable, + .enable_reg = SCM_GCCR, + .enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET, + .disable = _clk_disable, +}; + +static struct clk gpt_clk = { + .parent = &perclk[0], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk uart_clk = { + .parent = &perclk[0], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk i2c_clk = { + .parent = &hclk, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk spi_clk = { + .parent = &perclk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk sdhc_clk = { + .parent = &perclk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk lcdc_clk = { + .parent = &perclk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk mshc_clk = { + .parent = &hclk, + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk ssi_clk = { + .parent = &perclk[2], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, +}; + +static struct clk rtc_clk = { + .parent = &clk32, +}; + +#define _REGISTER_CLOCK(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = &c, \ + }, +static struct clk_lookup lookups[] __initdata = { + _REGISTER_CLOCK(NULL, "dma", dma_clk) + _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk) + _REGISTER_CLOCK(NULL, "mma", mma_clk) + _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) + _REGISTER_CLOCK(NULL, "gpt", gpt_clk) + _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) + _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) + _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) + _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) + _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) + _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) + _REGISTER_CLOCK(NULL, "mshc", mshc_clk) + _REGISTER_CLOCK(NULL, "ssi", ssi_clk) + _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk) +}; + +int __init mx1_clocks_init(unsigned long fref) +{ + unsigned int reg; + + /* disable clocks we are able to */ + __raw_writel(0, SCM_GCCR); + + clk32_rate = fref; + reg = __raw_readl(CCM_CSCR); + + /* detect clock reference for system PLL */ + if (reg & CCM_CSCR_SYSTEM_SEL) { + prem_clk.parent = &clk16m; + } else { + /* ensure that oscillator is disabled */ + reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT); + __raw_writel(reg, CCM_CSCR); + prem_clk.parent = &clk32_premult; + } + + /* detect reference for CLKO */ + reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET; + clko_clk.parent = (struct clk *)clko_clocks[reg]; + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + clk_enable(&hclk); + clk_enable(&fclk); + + mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), + MX1_TIM1_INT); + + return 0; +} diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c index b37280561a3..ceae6413d4c 100644 --- a/arch/arm/mach-imx/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -11,6 +11,9 @@ * * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * Copyright (c) 2008 Paulius Zaleckas + * Copyright (c) 2008 Darius Augulis * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -41,6 +44,199 @@ #include "devices.h" +#if defined(CONFIG_ARCH_MX1) +static struct resource imx1_camera_resources[] = { + { + .start = 0x00224000, + .end = 0x00224010, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_CSI_INT, + .end = MX1_CSI_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 imx1_camera_dmamask = DMA_BIT_MASK(32); + +struct platform_device imx1_camera_device = { + .name = "mx1-camera", + .id = 0, /* This is used to put cameras on this interface */ + .dev = { + .dma_mask = &imx1_camera_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = imx1_camera_resources, + .num_resources = ARRAY_SIZE(imx1_camera_resources), +}; + +static struct resource imx_i2c_resources[] = { + { + .start = 0x00217000, + .end = 0x00217010, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_I2C_INT, + .end = MX1_I2C_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_i2c_device0 = { + .name = "imx-i2c", + .id = 0, + .resource = imx_i2c_resources, + .num_resources = ARRAY_SIZE(imx_i2c_resources), +}; + +#define DEFINE_IMX1_UART_DEVICE(n, baseaddr, irqrx, irqtx, irqrts) \ + static struct resource imx1_uart_resources ## n[] = { \ + { \ + .start = baseaddr, \ + .end = baseaddr + 0xd0, \ + .flags = IORESOURCE_MEM, \ + }, { \ + .start = irqrx, \ + .end = irqrx, \ + .flags = IORESOURCE_IRQ, \ + }, { \ + .start = irqtx, \ + .end = irqtx, \ + .flags = IORESOURCE_IRQ, \ + }, { \ + .start = irqrts, \ + .end = irqrts, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }; \ + \ + struct platform_device imx1_uart_device ## n = { \ + .name = "imx-uart", \ + .id = n, \ + .num_resources = ARRAY_SIZE(imx1_uart_resources ## n), \ + .resource = imx1_uart_resources ## n, \ + } + +DEFINE_IMX1_UART_DEVICE(0, MX1_UART1_BASE_ADDR, MX1_UART1_MINT_RX, MX1_UART1_MINT_TX, MX1_UART1_MINT_RTS); +DEFINE_IMX1_UART_DEVICE(1, MX1_UART2_BASE_ADDR, MX1_UART2_MINT_RX, MX1_UART2_MINT_TX, MX1_UART2_MINT_RTS); + +static struct resource imx_rtc_resources[] = { + { + .start = 0x00204000, + .end = 0x00204024, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_RTC_INT, + .end = MX1_RTC_INT, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_RTC_SAMINT, + .end = MX1_RTC_SAMINT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_rtc_device = { + .name = "rtc-imx", + .id = 0, + .resource = imx_rtc_resources, + .num_resources = ARRAY_SIZE(imx_rtc_resources), +}; + +static struct resource imx_wdt_resources[] = { + { + .start = 0x00201000, + .end = 0x00201008, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_WDT_INT, + .end = MX1_WDT_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_wdt_device = { + .name = "imx-wdt", + .id = 0, + .resource = imx_wdt_resources, + .num_resources = ARRAY_SIZE(imx_wdt_resources), +}; + +static struct resource imx_usb_resources[] = { + { + .start = 0x00212000, + .end = 0x00212148, + .flags = IORESOURCE_MEM, + }, { + .start = MX1_USBD_INT0, + .end = MX1_USBD_INT0, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT1, + .end = MX1_USBD_INT1, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT2, + .end = MX1_USBD_INT2, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT3, + .end = MX1_USBD_INT3, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT4, + .end = MX1_USBD_INT4, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT5, + .end = MX1_USBD_INT5, + .flags = IORESOURCE_IRQ, + }, { + .start = MX1_USBD_INT6, + .end = MX1_USBD_INT6, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_usb_device = { + .name = "imx_udc", + .id = 0, + .num_resources = ARRAY_SIZE(imx_usb_resources), + .resource = imx_usb_resources, +}; + +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + { + .chip.label = "gpio-0", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), + .irq = MX1_GPIO_INT_PORTA, + .virtual_irq_start = MXC_GPIO_IRQ_START, + }, { + .chip.label = "gpio-1", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100), + .irq = MX1_GPIO_INT_PORTB, + .virtual_irq_start = MXC_GPIO_IRQ_START + 32, + }, { + .chip.label = "gpio-2", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200), + .irq = MX1_GPIO_INT_PORTC, + .virtual_irq_start = MXC_GPIO_IRQ_START + 64, + }, { + .chip.label = "gpio-3", + .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300), + .irq = MX1_GPIO_INT_PORTD, + .virtual_irq_start = MXC_GPIO_IRQ_START + 96, + } +}; + +int __init imx1_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} +#endif + +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) /* * SPI master controller * @@ -526,3 +722,4 @@ struct platform_device mx21_usbhc_device = { .resource = mx21_usbhc_resources, }; #endif +#endif diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h index 65c4a435b95..5c1a0dcb751 100644 --- a/arch/arm/mach-imx/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -1,3 +1,14 @@ +#ifdef CONFIG_ARCH_MX1 +extern struct platform_device imx1_camera_device; +extern struct platform_device imx_i2c_device0; +extern struct platform_device imx1_uart_device0; +extern struct platform_device imx1_uart_device1; +extern struct platform_device imx_rtc_device; +extern struct platform_device imx_wdt_device; +extern struct platform_device imx_usb_device; +#endif + +#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27) extern struct platform_device mxc_gpt1; extern struct platform_device mxc_gpt2; #ifdef CONFIG_MACH_MX27 @@ -42,3 +53,4 @@ extern struct platform_device mxc_spi_device2; extern struct platform_device mx21_usbhc_device; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; +#endif diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c new file mode 100644 index 00000000000..5d7c85f8aaf --- /dev/null +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -0,0 +1,165 @@ +/* + * arch/arm/mach-imx/mach-mx1ads.c + * + * Initially based on: + * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c + * Copyright (c) 2004 Sascha Hauer + * + * 2004 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +static int mx1ads_pins[] = { + /* UART1 */ + PC9_PF_UART1_CTS, + PC10_PF_UART1_RTS, + PC11_PF_UART1_TXD, + PC12_PF_UART1_RXD, + /* UART2 */ + PB28_PF_UART2_CTS, + PB29_PF_UART2_RTS, + PB30_PF_UART2_TXD, + PB31_PF_UART2_RXD, + /* I2C */ + PA15_PF_I2C_SDA, + PA16_PF_I2C_SCL, + /* SPI */ + PC13_PF_SPI1_SPI_RDY, + PC14_PF_SPI1_SCLK, + PC15_PF_SPI1_SS, + PC16_PF_SPI1_MISO, + PC17_PF_SPI1_MOSI, +}; + +/* + * UARTs platform data + */ + +static struct imxuart_platform_data uart_pdata[] = { + { + .flags = IMXUART_HAVE_RTSCTS, + }, { + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +/* + * Physmap flash + */ + +static struct physmap_flash_data mx1ads_flash_data = { + .width = 4, /* bankwidth in bytes */ +}; + +static struct resource flash_resource = { + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + SZ_32M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = 0, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * I2C + */ +static struct pcf857x_platform_data pcf857x_data[] = { + { + .gpio_base = 4 * 32, + }, { + .gpio_base = 4 * 32 + 16, + } +}; + +static struct imxi2c_platform_data mx1ads_i2c_data = { + .bitrate = 100000, +}; + +static struct i2c_board_info mx1ads_i2c_devices[] = { + { + I2C_BOARD_INFO("pcf8575", 0x22), + .platform_data = &pcf857x_data[0], + }, { + I2C_BOARD_INFO("pcf8575", 0x24), + .platform_data = &pcf857x_data[1], + }, +}; + +/* + * Board init + */ +static void __init mx1ads_init(void) +{ + mxc_gpio_setup_multiple_pins(mx1ads_pins, + ARRAY_SIZE(mx1ads_pins), "mx1ads"); + + /* UART */ + mxc_register_device(&imx1_uart_device0, &uart_pdata[0]); + mxc_register_device(&imx1_uart_device1, &uart_pdata[1]); + + /* Physmap flash */ + mxc_register_device(&flash_device, &mx1ads_flash_data); + + /* I2C */ + i2c_register_board_info(0, mx1ads_i2c_devices, + ARRAY_SIZE(mx1ads_i2c_devices)); + + mxc_register_device(&imx_i2c_device0, &mx1ads_i2c_data); +} + +static void __init mx1ads_timer_init(void) +{ + mx1_clocks_init(32000); +} + +struct sys_timer mx1ads_timer = { + .init = mx1ads_timer_init, +}; + +MACHINE_START(MX1ADS, "Freescale MX1ADS") + /* Maintainer: Sascha Hauer, Pengutronix */ + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, +MACHINE_END + +MACHINE_START(MXLADS, "Freescale MXLADS") + .phys_io = MX1_IO_BASE_ADDR, + .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, + .boot_params = MX1_PHYS_OFFSET + 0x100, + .map_io = mx1_map_io, + .init_irq = mx1_init_irq, + .timer = &mx1ads_timer, + .init_machine = mx1ads_init, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c new file mode 100644 index 00000000000..482b24df462 --- /dev/null +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-mx1/mach-scb9328.c + * + * Copyright (c) 2004 Sascha Hauer + * Copyright (c) 2006-2008 Juergen Beisert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "devices.h" + +/* + * This scb9328 has a 32MiB flash + */ +static struct resource flash_resource = { + .start = MX1_CS0_PHYS, + .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, + .flags = IORESOURCE_MEM, +}; + +static struct physmap_flash_data scb_flash_data = { + .width = 2, +}; + +static struct platform_device scb_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &scb_flash_data, + }, + .resource = &flash_resource, + .num_resources = 1, +}; + +/* + * scb9328 has a DM9000 network controller + * connected to CS5, with 16 bit data path + * and interrupt connected to GPIO 3 + */ + +/* + * internal datapath is fixed 16 bit + */ +static struct dm9000_plat_data dm9000_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +/* + * the DM9000 drivers wants two defined address spaces + * to gain access to address latch registers and the data path. + */ +static struct resource dm9000x_resources[] = { + { + .name = "address area", + .start = MX1_CS5_PHYS, + .end = MX1_CS5_PHYS + 1, + .flags = IORESOURCE_MEM, /* address access */ + }, { + .name = "data area", + .start = MX1_CS5_PHYS + 4, + .end = MX1_CS5_PHYS + 5, + .flags = IORESOURCE_MEM, /* data access */ + }, { + .start = IRQ_GPIOC(3), + .end = IRQ_GPIOC(3), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, +}; + +static struct platform_device dm9000x_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(dm9000x_resources), + .resource = dm9000x_resources, + .dev = { + .platform_data = &dm9000_platdata, + } +}; + +static int mxc_uart1_pins[] = { + PC9_PF_UART1_CTS, + PC10_PF_UART1_RTS, + PC11_PF_UART1_TXD, + PC12_PF_UART1_RXD, +}; + +static int uart1_mxc_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), "UART1"); +} + +static void uart1_mxc_exit(struct platform_device *pdev) +{ + mxc_gpio_release_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins)); +} + +static struct imxuart_platform_data uart_pdata = { + .init = uart1_mxc_init, + .exit = uart1_mxc_exit, + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct platform_device *devices[] __initdata = { + &scb_flash_device, + &dm9000x_device, +}; + +/* + * scb9328_init - Init the CPU card itself + */ +static void __init scb9328_init(void) +{ + mxc_register_device(&imx1_uart_device0, &uart_pdata); + + printk(KERN_INFO"Scb9328: Adding devices\n"); + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static void __init scb9328_timer_init(void) +{ + mx1_clocks_init(32000); +} + +static struct sys_timer scb9328_timer = { + .init = scb9328_timer_init, +}; + +MACHINE_START(SCB9328, "Synertronixx scb9328") + /* Sascha Hauer */ + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mx1_map_io, + .init_irq = mx1_init_irq, + .timer = &scb9328_timer, + .init_machine = scb9328_init, +MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c new file mode 100644 index 00000000000..396d0a5f71b --- /dev/null +++ b/arch/arm/mach-imx/mm-imx1.c @@ -0,0 +1,55 @@ +/* + * author: Sascha Hauer + * Created: april 20th, 2004 + * Copyright: Synertronixx GmbH + * + * Common code for i.MX1 machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#include +#include +#include + +#include + +#include +#include + +static struct map_desc imx_io_desc[] __initdata = { + { + .virtual = MX1_IO_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR), + .length = MX1_IO_SIZE, + .type = MT_DEVICE + } +}; + +void __init mx1_map_io(void) +{ + mxc_set_cpu_type(MXC_CPU_MX1); + mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); + + iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); +} + +int imx1_register_gpios(void); + +void __init mx1_init_irq(void) +{ + imx1_register_gpios(); + mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); +} diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c new file mode 100644 index 00000000000..b09ee12a4ff --- /dev/null +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c @@ -0,0 +1,18 @@ +/* + * Exported ksyms of ARCH_MX1 + * + * Copyright (C) 2008, Darius Augulis + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include + +/* IMX camera FIQ handler */ +EXPORT_SYMBOL(mx1_camera_sof_fiq_start); +EXPORT_SYMBOL(mx1_camera_sof_fiq_end); diff --git a/arch/arm/mach-imx/mx1-camera-fiq.S b/arch/arm/mach-imx/mx1-camera-fiq.S new file mode 100644 index 00000000000..9c69aa65bf1 --- /dev/null +++ b/arch/arm/mach-imx/mx1-camera-fiq.S @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2008 Paulius Zaleckas + * + * Based on linux/arch/arm/lib/floppydma.S + * Copyright (C) 1995, 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + .text + .global mx1_camera_sof_fiq_end + .global mx1_camera_sof_fiq_start +mx1_camera_sof_fiq_start: + @ enable dma + ldr r12, [r9] + orr r12, r12, #0x00000001 + str r12, [r9] + @ unmask DMA interrupt + ldr r12, [r8] + bic r12, r12, r13 + str r12, [r8] + @ disable SOF interrupt + ldr r12, [r10] + bic r12, r12, #0x00010000 + str r12, [r10] + @ clear SOF flag + mov r12, #0x00010000 + str r12, [r11] + @ return from FIQ + subs pc, lr, #4 +mx1_camera_sof_fiq_end: diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig deleted file mode 100644 index eb7660f5d4b..00000000000 --- a/arch/arm/mach-mx1/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -if ARCH_MX1 - -comment "MX1 platforms:" - -config MACH_MXLADS - bool - -config ARCH_MX1ADS - bool "MX1ADS platform" - select MACH_MXLADS - help - Say Y here if you are using Motorola MX1ADS/MXLADS boards - -config MACH_SCB9328 - bool "Synertronixx scb9328" - help - Say Y here if you are using a Synertronixx scb9328 board - -endif diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile deleted file mode 100644 index 297d17210e1..00000000000 --- a/arch/arm/mach-mx1/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += generic.o clock.o devices.o - -# Support for CMOS sensor interface -obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o - -# Specific board support -obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o diff --git a/arch/arm/mach-mx1/Makefile.boot b/arch/arm/mach-mx1/Makefile.boot deleted file mode 100644 index 8ed1492288a..00000000000 --- a/arch/arm/mach-mx1/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y := 0x08008000 -params_phys-y := 0x08000100 -initrd_phys-y := 0x08800000 - diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c deleted file mode 100644 index c05096c3830..00000000000 --- a/arch/arm/mach-mx1/clock.c +++ /dev/null @@ -1,636 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer , Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off))) - -/* CCM register addresses */ -#define CCM_CSCR IO_ADDR_CCM(0x0) -#define CCM_MPCTL0 IO_ADDR_CCM(0x4) -#define CCM_SPCTL0 IO_ADDR_CCM(0xc) -#define CCM_PCDR IO_ADDR_CCM(0x20) - -#define CCM_CSCR_CLKO_OFFSET 29 -#define CCM_CSCR_CLKO_MASK (0x7 << 29) -#define CCM_CSCR_USB_OFFSET 26 -#define CCM_CSCR_USB_MASK (0x7 << 26) -#define CCM_CSCR_OSC_EN_SHIFT 17 -#define CCM_CSCR_SYSTEM_SEL (1 << 16) -#define CCM_CSCR_BCLK_OFFSET 10 -#define CCM_CSCR_BCLK_MASK (0xf << 10) -#define CCM_CSCR_PRESC (1 << 15) - -#define CCM_PCDR_PCLK3_OFFSET 16 -#define CCM_PCDR_PCLK3_MASK (0x7f << 16) -#define CCM_PCDR_PCLK2_OFFSET 4 -#define CCM_PCDR_PCLK2_MASK (0xf << 4) -#define CCM_PCDR_PCLK1_OFFSET 0 -#define CCM_PCDR_PCLK1_MASK 0xf - -#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off))) - -/* SCM register addresses */ -#define SCM_GCCR IO_ADDR_SCM(0xc) - -#define SCM_GCCR_DMA_CLK_EN_OFFSET 3 -#define SCM_GCCR_CSI_CLK_EN_OFFSET 2 -#define SCM_GCCR_MMA_CLK_EN_OFFSET 1 -#define SCM_GCCR_USBD_CLK_EN_OFFSET 0 - -static int _clk_enable(struct clk *clk) -{ - unsigned int reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void _clk_disable(struct clk *clk) -{ - unsigned int reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size, - struct clk *parent) -{ - int i; - - for (i = 0; i < size; i++) - if (parent == clk_arr[i]) - return i; - - return -EINVAL; -} - -static unsigned long -_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit) -{ - int div; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - if (parent_rate % rate) - div++; - - if (div > limit) - div = limit; - - return parent_rate / div; -} - -static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) -{ - return clk->parent->round_rate(clk->parent, rate); -} - -static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) -{ - return clk->parent->set_rate(clk->parent, rate); -} - -static unsigned long clk16m_get_rate(struct clk *clk) -{ - return 16000000; -} - -static struct clk clk16m = { - .get_rate = clk16m_get_rate, - .enable = _clk_enable, - .enable_reg = CCM_CSCR, - .enable_shift = CCM_CSCR_OSC_EN_SHIFT, - .disable = _clk_disable, -}; - -/* in Hz */ -static unsigned long clk32_rate; - -static unsigned long clk32_get_rate(struct clk *clk) -{ - return clk32_rate; -} - -static struct clk clk32 = { - .get_rate = clk32_get_rate, -}; - -static unsigned long clk32_premult_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) * 512; -} - -static struct clk clk32_premult = { - .parent = &clk32, - .get_rate = clk32_premult_get_rate, -}; - -static const struct clk *prem_clk_clocks[] = { - &clk32_premult, - &clk16m, -}; - -static int prem_clk_set_parent(struct clk *clk, struct clk *parent) -{ - int i; - unsigned int reg = __raw_readl(CCM_CSCR); - - i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks), - parent); - - switch (i) { - case 0: - reg &= ~CCM_CSCR_SYSTEM_SEL; - break; - case 1: - reg |= CCM_CSCR_SYSTEM_SEL; - break; - default: - return i; - } - - __raw_writel(reg, CCM_CSCR); - - return 0; -} - -static struct clk prem_clk = { - .set_parent = prem_clk_set_parent, -}; - -static unsigned long system_clk_get_rate(struct clk *clk) -{ - return mxc_decode_pll(__raw_readl(CCM_SPCTL0), - clk_get_rate(clk->parent)); -} - -static struct clk system_clk = { - .parent = &prem_clk, - .get_rate = system_clk_get_rate, -}; - -static unsigned long mcu_clk_get_rate(struct clk *clk) -{ - return mxc_decode_pll(__raw_readl(CCM_MPCTL0), - clk_get_rate(clk->parent)); -} - -static struct clk mcu_clk = { - .parent = &clk32_premult, - .get_rate = mcu_clk_get_rate, -}; - -static unsigned long fclk_get_rate(struct clk *clk) -{ - unsigned long fclk = clk_get_rate(clk->parent); - - if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC) - fclk /= 2; - - return fclk; -} - -static struct clk fclk = { - .parent = &mcu_clk, - .get_rate = fclk_get_rate, -}; - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -static unsigned long hclk_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) & - CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1); -} - -static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate) -{ - return _clk_simple_round_rate(clk, rate, 16); -} - -static int hclk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int div; - unsigned int reg; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 16 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - - div--; - - reg = __raw_readl(CCM_CSCR); - reg &= ~CCM_CSCR_BCLK_MASK; - reg |= div << CCM_CSCR_BCLK_OFFSET; - __raw_writel(reg, CCM_CSCR); - - return 0; -} - -static struct clk hclk = { - .parent = &system_clk, - .get_rate = hclk_get_rate, - .round_rate = hclk_round_rate, - .set_rate = hclk_set_rate, -}; - -static unsigned long clk48m_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) & - CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1); -} - -static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate) -{ - return _clk_simple_round_rate(clk, rate, 8); -} - -static int clk48m_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int div; - unsigned int reg; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 8 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - - div--; - - reg = __raw_readl(CCM_CSCR); - reg &= ~CCM_CSCR_USB_MASK; - reg |= div << CCM_CSCR_USB_OFFSET; - __raw_writel(reg, CCM_CSCR); - - return 0; -} - -static struct clk clk48m = { - .parent = &system_clk, - .get_rate = clk48m_get_rate, - .round_rate = clk48m_round_rate, - .set_rate = clk48m_set_rate, -}; - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -static unsigned long perclk1_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & - CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1); -} - -static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate) -{ - return _clk_simple_round_rate(clk, rate, 16); -} - -static int perclk1_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int div; - unsigned int reg; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 16 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - - div--; - - reg = __raw_readl(CCM_PCDR); - reg &= ~CCM_PCDR_PCLK1_MASK; - reg |= div << CCM_PCDR_PCLK1_OFFSET; - __raw_writel(reg, CCM_PCDR); - - return 0; -} - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -static unsigned long perclk2_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & - CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1); -} - -static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate) -{ - return _clk_simple_round_rate(clk, rate, 16); -} - -static int perclk2_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int div; - unsigned int reg; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 16 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - - div--; - - reg = __raw_readl(CCM_PCDR); - reg &= ~CCM_PCDR_PCLK2_MASK; - reg |= div << CCM_PCDR_PCLK2_OFFSET; - __raw_writel(reg, CCM_PCDR); - - return 0; -} - -/* - * get peripheral clock 3 ( SSI ) - */ -static unsigned long perclk3_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) & - CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1); -} - -static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate) -{ - return _clk_simple_round_rate(clk, rate, 128); -} - -static int perclk3_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned int div; - unsigned int reg; - unsigned long parent_rate; - - parent_rate = clk_get_rate(clk->parent); - - div = parent_rate / rate; - - if (div > 128 || div < 1 || ((parent_rate / div) != rate)) - return -EINVAL; - - div--; - - reg = __raw_readl(CCM_PCDR); - reg &= ~CCM_PCDR_PCLK3_MASK; - reg |= div << CCM_PCDR_PCLK3_OFFSET; - __raw_writel(reg, CCM_PCDR); - - return 0; -} - -static struct clk perclk[] = { - { - .id = 0, - .parent = &system_clk, - .get_rate = perclk1_get_rate, - .round_rate = perclk1_round_rate, - .set_rate = perclk1_set_rate, - }, { - .id = 1, - .parent = &system_clk, - .get_rate = perclk2_get_rate, - .round_rate = perclk2_round_rate, - .set_rate = perclk2_set_rate, - }, { - .id = 2, - .parent = &system_clk, - .get_rate = perclk3_get_rate, - .round_rate = perclk3_round_rate, - .set_rate = perclk3_set_rate, - } -}; - -static const struct clk *clko_clocks[] = { - &perclk[0], - &hclk, - &clk48m, - &clk16m, - &prem_clk, - &fclk, -}; - -static int clko_set_parent(struct clk *clk, struct clk *parent) -{ - int i; - unsigned int reg; - - i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent); - if (i < 0) - return i; - - reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK; - reg |= i << CCM_CSCR_CLKO_OFFSET; - __raw_writel(reg, CCM_CSCR); - - if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) { - clk->set_rate = _clk_parent_set_rate; - clk->round_rate = _clk_parent_round_rate; - } else { - clk->set_rate = NULL; - clk->round_rate = NULL; - } - - return 0; -} - -static struct clk clko_clk = { - .set_parent = clko_set_parent, -}; - -static struct clk dma_clk = { - .parent = &hclk, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - .enable = _clk_enable, - .enable_reg = SCM_GCCR, - .enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET, - .disable = _clk_disable, -}; - -static struct clk csi_clk = { - .parent = &hclk, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - .enable = _clk_enable, - .enable_reg = SCM_GCCR, - .enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET, - .disable = _clk_disable, -}; - -static struct clk mma_clk = { - .parent = &hclk, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - .enable = _clk_enable, - .enable_reg = SCM_GCCR, - .enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET, - .disable = _clk_disable, -}; - -static struct clk usbd_clk = { - .parent = &clk48m, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, - .enable = _clk_enable, - .enable_reg = SCM_GCCR, - .enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET, - .disable = _clk_disable, -}; - -static struct clk gpt_clk = { - .parent = &perclk[0], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk uart_clk = { - .parent = &perclk[0], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk i2c_clk = { - .parent = &hclk, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk spi_clk = { - .parent = &perclk[1], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk sdhc_clk = { - .parent = &perclk[1], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk lcdc_clk = { - .parent = &perclk[1], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk mshc_clk = { - .parent = &hclk, - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk ssi_clk = { - .parent = &perclk[2], - .round_rate = _clk_parent_round_rate, - .set_rate = _clk_parent_set_rate, -}; - -static struct clk rtc_clk = { - .parent = &clk32, -}; - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, -static struct clk_lookup lookups[] __initdata = { - _REGISTER_CLOCK(NULL, "dma", dma_clk) - _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk) - _REGISTER_CLOCK(NULL, "mma", mma_clk) - _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) - _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) - _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) - _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) - _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) - _REGISTER_CLOCK(NULL, "mshc", mshc_clk) - _REGISTER_CLOCK(NULL, "ssi", ssi_clk) - _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk) -}; - -int __init mx1_clocks_init(unsigned long fref) -{ - unsigned int reg; - - /* disable clocks we are able to */ - __raw_writel(0, SCM_GCCR); - - clk32_rate = fref; - reg = __raw_readl(CCM_CSCR); - - /* detect clock reference for system PLL */ - if (reg & CCM_CSCR_SYSTEM_SEL) { - prem_clk.parent = &clk16m; - } else { - /* ensure that oscillator is disabled */ - reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT); - __raw_writel(reg, CCM_CSCR); - prem_clk.parent = &clk32_premult; - } - - /* detect reference for CLKO */ - reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET; - clko_clk.parent = (struct clk *)clko_clocks[reg]; - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - clk_enable(&hclk); - clk_enable(&fclk); - - mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); - - return 0; -} diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c deleted file mode 100644 index a79e6132dbe..00000000000 --- a/arch/arm/mach-mx1/devices.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * Copyright (c) 2008 Paulius Zaleckas - * Copyright (c) 2008 Darius Augulis - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "devices.h" - -static struct resource imx1_camera_resources[] = { - { - .start = 0x00224000, - .end = 0x00224010, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CSI_INT, - .end = MX1_CSI_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 imx1_camera_dmamask = DMA_BIT_MASK(32); - -struct platform_device imx1_camera_device = { - .name = "mx1-camera", - .id = 0, /* This is used to put cameras on this interface */ - .dev = { - .dma_mask = &imx1_camera_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = imx1_camera_resources, - .num_resources = ARRAY_SIZE(imx1_camera_resources), -}; - -static struct resource imx_i2c_resources[] = { - { - .start = 0x00217000, - .end = 0x00217010, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_I2C_INT, - .end = MX1_I2C_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .resource = imx_i2c_resources, - .num_resources = ARRAY_SIZE(imx_i2c_resources), -}; - -#define DEFINE_IMX1_UART_DEVICE(n, baseaddr, irqrx, irqtx, irqrts) \ - static struct resource imx1_uart_resources ## n[] = { \ - { \ - .start = baseaddr, \ - .end = baseaddr + 0xd0, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = irqrx, \ - .end = irqrx, \ - .flags = IORESOURCE_IRQ, \ - }, { \ - .start = irqtx, \ - .end = irqtx, \ - .flags = IORESOURCE_IRQ, \ - }, { \ - .start = irqrts, \ - .end = irqrts, \ - .flags = IORESOURCE_IRQ, \ - }, \ - }; \ - \ - struct platform_device imx1_uart_device ## n = { \ - .name = "imx-uart", \ - .id = n, \ - .num_resources = ARRAY_SIZE(imx1_uart_resources ## n), \ - .resource = imx1_uart_resources ## n, \ - } - -DEFINE_IMX1_UART_DEVICE(0, MX1_UART1_BASE_ADDR, MX1_UART1_MINT_RX, MX1_UART1_MINT_TX, MX1_UART1_MINT_RTS); -DEFINE_IMX1_UART_DEVICE(1, MX1_UART2_BASE_ADDR, MX1_UART2_MINT_RX, MX1_UART2_MINT_TX, MX1_UART2_MINT_RTS); - -static struct resource imx_rtc_resources[] = { - { - .start = 0x00204000, - .end = 0x00204024, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_RTC_INT, - .end = MX1_RTC_INT, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_RTC_SAMINT, - .end = MX1_RTC_SAMINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_rtc_device = { - .name = "rtc-imx", - .id = 0, - .resource = imx_rtc_resources, - .num_resources = ARRAY_SIZE(imx_rtc_resources), -}; - -static struct resource imx_wdt_resources[] = { - { - .start = 0x00201000, - .end = 0x00201008, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_WDT_INT, - .end = MX1_WDT_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_wdt_device = { - .name = "imx-wdt", - .id = 0, - .resource = imx_wdt_resources, - .num_resources = ARRAY_SIZE(imx_wdt_resources), -}; - -static struct resource imx_usb_resources[] = { - { - .start = 0x00212000, - .end = 0x00212148, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_USBD_INT0, - .end = MX1_USBD_INT0, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT1, - .end = MX1_USBD_INT1, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT2, - .end = MX1_USBD_INT2, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT3, - .end = MX1_USBD_INT3, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT4, - .end = MX1_USBD_INT4, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT5, - .end = MX1_USBD_INT5, - .flags = IORESOURCE_IRQ, - }, { - .start = MX1_USBD_INT6, - .end = MX1_USBD_INT6, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_usb_device = { - .name = "imx_udc", - .id = 0, - .num_resources = ARRAY_SIZE(imx_usb_resources), - .resource = imx_usb_resources, -}; - -/* GPIO port description */ -static struct mxc_gpio_port imx_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), - .irq = MX1_GPIO_INT_PORTA, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, { - .chip.label = "gpio-1", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100), - .irq = MX1_GPIO_INT_PORTB, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, { - .chip.label = "gpio-2", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200), - .irq = MX1_GPIO_INT_PORTC, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, { - .chip.label = "gpio-3", - .base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300), - .irq = MX1_GPIO_INT_PORTD, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - } -}; - -int __init imx1_register_gpios(void) -{ - return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); -} diff --git a/arch/arm/mach-mx1/devices.h b/arch/arm/mach-mx1/devices.h deleted file mode 100644 index 13325166f63..00000000000 --- a/arch/arm/mach-mx1/devices.h +++ /dev/null @@ -1,7 +0,0 @@ -extern struct platform_device imx1_camera_device; -extern struct platform_device imx_i2c_device0; -extern struct platform_device imx1_uart_device0; -extern struct platform_device imx1_uart_device1; -extern struct platform_device imx_rtc_device; -extern struct platform_device imx_wdt_device; -extern struct platform_device imx_usb_device; diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c deleted file mode 100644 index a9be5f14bd9..00000000000 --- a/arch/arm/mach-mx1/generic.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include -#include -#include - -#include - -#include -#include - -static struct map_desc imx_io_desc[] __initdata = { - { - .virtual = MX1_IO_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX1_IO_BASE_ADDR), - .length = MX1_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init mx1_map_io(void) -{ - mxc_set_cpu_type(MXC_CPU_MX1); - mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -int imx1_register_gpios(void); - -void __init mx1_init_irq(void) -{ - imx1_register_gpios(); - mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); -} diff --git a/arch/arm/mach-mx1/ksym_mx1.c b/arch/arm/mach-mx1/ksym_mx1.c deleted file mode 100644 index b09ee12a4ff..00000000000 --- a/arch/arm/mach-mx1/ksym_mx1.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Exported ksyms of ARCH_MX1 - * - * Copyright (C) 2008, Darius Augulis - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -#include - -/* IMX camera FIQ handler */ -EXPORT_SYMBOL(mx1_camera_sof_fiq_start); -EXPORT_SYMBOL(mx1_camera_sof_fiq_end); diff --git a/arch/arm/mach-mx1/mach-mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c deleted file mode 100644 index 5d7c85f8aaf..00000000000 --- a/arch/arm/mach-mx1/mach-mx1ads.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * arch/arm/mach-imx/mach-mx1ads.c - * - * Initially based on: - * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c - * Copyright (c) 2004 Sascha Hauer - * - * 2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "devices.h" - -static int mx1ads_pins[] = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, - /* SPI */ - PC13_PF_SPI1_SPI_RDY, - PC14_PF_SPI1_SCLK, - PC15_PF_SPI1_SS, - PC16_PF_SPI1_MISO, - PC17_PF_SPI1_MOSI, -}; - -/* - * UARTs platform data - */ - -static struct imxuart_platform_data uart_pdata[] = { - { - .flags = IMXUART_HAVE_RTSCTS, - }, { - .flags = IMXUART_HAVE_RTSCTS, - }, -}; - -/* - * Physmap flash - */ - -static struct physmap_flash_data mx1ads_flash_data = { - .width = 4, /* bankwidth in bytes */ -}; - -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device flash_device = { - .name = "physmap-flash", - .id = 0, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * I2C - */ -static struct pcf857x_platform_data pcf857x_data[] = { - { - .gpio_base = 4 * 32, - }, { - .gpio_base = 4 * 32 + 16, - } -}; - -static struct imxi2c_platform_data mx1ads_i2c_data = { - .bitrate = 100000, -}; - -static struct i2c_board_info mx1ads_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8575", 0x22), - .platform_data = &pcf857x_data[0], - }, { - I2C_BOARD_INFO("pcf8575", 0x24), - .platform_data = &pcf857x_data[1], - }, -}; - -/* - * Board init - */ -static void __init mx1ads_init(void) -{ - mxc_gpio_setup_multiple_pins(mx1ads_pins, - ARRAY_SIZE(mx1ads_pins), "mx1ads"); - - /* UART */ - mxc_register_device(&imx1_uart_device0, &uart_pdata[0]); - mxc_register_device(&imx1_uart_device1, &uart_pdata[1]); - - /* Physmap flash */ - mxc_register_device(&flash_device, &mx1ads_flash_data); - - /* I2C */ - i2c_register_board_info(0, mx1ads_i2c_devices, - ARRAY_SIZE(mx1ads_i2c_devices)); - - mxc_register_device(&imx_i2c_device0, &mx1ads_i2c_data); -} - -static void __init mx1ads_timer_init(void) -{ - mx1_clocks_init(32000); -} - -struct sys_timer mx1ads_timer = { - .init = mx1ads_timer_init, -}; - -MACHINE_START(MX1ADS, "Freescale MX1ADS") - /* Maintainer: Sascha Hauer, Pengutronix */ - .phys_io = MX1_IO_BASE_ADDR, - .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, -MACHINE_END - -MACHINE_START(MXLADS, "Freescale MXLADS") - .phys_io = MX1_IO_BASE_ADDR, - .io_pg_offst = (MX1_IO_BASE_ADDR_VIRT >> 18) & 0xfffc, - .boot_params = MX1_PHYS_OFFSET + 0x100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &mx1ads_timer, - .init_machine = mx1ads_init, -MACHINE_END diff --git a/arch/arm/mach-mx1/mach-scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c deleted file mode 100644 index 482b24df462..00000000000 --- a/arch/arm/mach-mx1/mach-scb9328.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * linux/arch/arm/mach-mx1/mach-scb9328.c - * - * Copyright (c) 2004 Sascha Hauer - * Copyright (c) 2006-2008 Juergen Beisert - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices.h" - -/* - * This scb9328 has a 32MiB flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data scb_flash_data = { - .width = 2, -}; - -static struct platform_device scb_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &scb_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * scb9328 has a DM9000 network controller - * connected to CS5, with 16 bit data path - * and interrupt connected to GPIO 3 - */ - -/* - * internal datapath is fixed 16 bit - */ -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -/* - * the DM9000 drivers wants two defined address spaces - * to gain access to address latch registers and the data path. - */ -static struct resource dm9000x_resources[] = { - { - .name = "address area", - .start = MX1_CS5_PHYS, - .end = MX1_CS5_PHYS + 1, - .flags = IORESOURCE_MEM, /* address access */ - }, { - .name = "data area", - .start = MX1_CS5_PHYS + 4, - .end = MX1_CS5_PHYS + 5, - .flags = IORESOURCE_MEM, /* data access */ - }, { - .start = IRQ_GPIOC(3), - .end = IRQ_GPIOC(3), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000x_resources), - .resource = dm9000x_resources, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -static int mxc_uart1_pins[] = { - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, -}; - -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static void uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); -} - -static struct imxuart_platform_data uart_pdata = { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &scb_flash_device, - &dm9000x_device, -}; - -/* - * scb9328_init - Init the CPU card itself - */ -static void __init scb9328_init(void) -{ - mxc_register_device(&imx1_uart_device0, &uart_pdata); - - printk(KERN_INFO"Scb9328: Adding devices\n"); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init scb9328_timer_init(void) -{ - mx1_clocks_init(32000); -} - -static struct sys_timer scb9328_timer = { - .init = scb9328_timer_init, -}; - -MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .phys_io = 0x00200000, - .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, - .boot_params = 0x08000100, - .map_io = mx1_map_io, - .init_irq = mx1_init_irq, - .timer = &scb9328_timer, - .init_machine = scb9328_init, -MACHINE_END diff --git a/arch/arm/mach-mx1/mx1_camera_fiq.S b/arch/arm/mach-mx1/mx1_camera_fiq.S deleted file mode 100644 index 9c69aa65bf1..00000000000 --- a/arch/arm/mach-mx1/mx1_camera_fiq.S +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2008 Paulius Zaleckas - * - * Based on linux/arch/arm/lib/floppydma.S - * Copyright (C) 1995, 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include - - .text - .global mx1_camera_sof_fiq_end - .global mx1_camera_sof_fiq_start -mx1_camera_sof_fiq_start: - @ enable dma - ldr r12, [r9] - orr r12, r12, #0x00000001 - str r12, [r9] - @ unmask DMA interrupt - ldr r12, [r8] - bic r12, r12, r13 - str r12, [r8] - @ disable SOF interrupt - ldr r12, [r10] - bic r12, r12, #0x00010000 - str r12, [r10] - @ clear SOF flag - mov r12, #0x00010000 - str r12, [r11] - @ return from FIQ - subs pc, lr, #4 -mx1_camera_sof_fiq_end: diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 4974fcc0673..3adad382227 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -48,7 +48,6 @@ config ARCH_MX5 endchoice -source "arch/arm/mach-mx1/Kconfig" source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" source "arch/arm/mach-mx25/Kconfig" -- cgit v1.2.3-70-g09d2 From e780d2392dd37fcc231d97400c1cdd8d261ed556 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 14 Jun 2010 17:39:21 +0200 Subject: ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit MACH_... is reserved for machine support, so use SOC as prefix, not MACH. This introduces new symbols SOC_IMX1, SOC_IMX21 and SOC_IMX27. They are selected by the old symbols for now. There is no substitute for MACH_MX2 as most usages of MX2 only means MX21 + MX27 but not MX25. Later the choice about CPU and CPU family should go away and the individual machines should select the right SOC symbol. This is a precondition to support more than one SOC in a single kernel image. Signed-off-by: Uwe Kleine-König --- arch/arm/mach-imx/Kconfig | 21 +++++++++++++++++++-- arch/arm/plat-mxc/Kconfig | 5 +---- 2 files changed, 20 insertions(+), 6 deletions(-) (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3ca8fa7d91a..5edead235bd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,5 +1,10 @@ if ARCH_MX1 +config SOC_IMX1 + select CPU_ARM920T + select IMX_HAVE_IOMUX_V1 + bool + comment "MX1 platforms:" config MACH_MXLADS bool @@ -19,19 +24,31 @@ endif if ARCH_MX2 +config SOC_IMX21 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_IOMUX_V1 + bool + +config SOC_IMX27 + select CPU_ARM926T + select ARCH_MXC_AUDMUX_V1 + select IMX_HAVE_IOMUX_V1 + bool + choice prompt "CPUs:" default MACH_MX21 config MACH_MX21 bool "i.MX21 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX21 help This enables support for Freescale's MX2 based i.MX21 processor. config MACH_MX27 bool "i.MX27 support" - select ARCH_MXC_AUDMUX_V1 + select SOC_IMX27 help This enables support for Freescale's MX2 based i.MX27 processor. diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 3adad382227..d80de4eacd2 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -8,15 +8,12 @@ choice config ARCH_MX1 bool "MX1-based" - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 + select SOC_IMX1 help This enables support for systems based on the Freescale i.MX1 family config ARCH_MX2 bool "MX2-based" - select CPU_ARM926T - select IMX_HAVE_IOMUX_V1 help This enables support for systems based on the Freescale i.MX2 family -- cgit v1.2.3-70-g09d2 From 66384eedd900f2f6bb00e4f16c2cb770d6b0066b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Tue, 15 Jun 2010 18:14:19 +0200 Subject: ARM: imx: Change the way nand devices are registered (generic part) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead of having a platform device defined in a devices.c and register it in the machine file allocate it dynamically. This reduces the size of needed memory as the new function is discarded after init and only the existing devices are created. Signed-off-by: Uwe Kleine-König --- arch/arm/plat-mxc/Kconfig | 2 ++ arch/arm/plat-mxc/Makefile | 2 ++ arch/arm/plat-mxc/devices/Kconfig | 2 ++ arch/arm/plat-mxc/devices/Makefile | 1 + arch/arm/plat-mxc/devices/platform-mxc_nand.c | 44 +++++++++++++++++++++++++ arch/arm/plat-mxc/include/mach/devices-common.h | 6 ++++ 6 files changed, 57 insertions(+) create mode 100644 arch/arm/plat-mxc/devices/Kconfig create mode 100644 arch/arm/plat-mxc/devices/Makefile create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_nand.c (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index d80de4eacd2..cf053d7e526 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -1,5 +1,7 @@ if ARCH_MXC +source "arch/arm/plat-mxc/devices/Kconfig" + menu "Freescale MXC Implementations" choice diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index f134d14eabf..c7506a80eb3 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -19,3 +19,5 @@ ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif + +obj-y += devices/ diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig new file mode 100644 index 00000000000..09e91dde63a --- /dev/null +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -0,0 +1,2 @@ +config IMX_HAVE_PLATFORM_MXC_NAND + bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile new file mode 100644 index 00000000000..e314533a61b --- /dev/null +++ b/arch/arm/plat-mxc/devices/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c new file mode 100644 index 00000000000..1c286418d12 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2009-2010 Pengutronix + * Uwe Kleine-Koenig + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include +#include + +static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata, + resource_size_t iosize) +{ + static int id = 0; + + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} + +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); +} + +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata) +{ + return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); +} diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 849d8ff7b17..d5f121a5604 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -13,3 +13,9 @@ struct platform_device *imx_add_platform_device(const char *name, int id, const struct resource *res, unsigned int num_resources, const void *data, size_t size_data); + +#include +struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); +struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, + int irq, const struct mxc_nand_platform_data *pdata); -- cgit v1.2.3-70-g09d2 From 8402ed30e16c65ad8560ba3293c7cf9c259712eb Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Tue, 8 Jun 2010 11:03:00 +0200 Subject: i.MX25: add AUDMUX and SSI support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * add clocks for audmux and ssi 1 & 2 * add irq for ssi 1 & 2 * add devices platform for ssi1 & 2 * update audmux-v2 for i.MX25 * add base addresses for audmux & ssi 1 & 2 * add iomux configuration for GPIO for AUD5 port Signed-off-by: Eric Bénard Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/clock.c | 18 ++++++++++++++ arch/arm/mach-mx25/devices.c | 38 +++++++++++++++++++++++++++++ arch/arm/mach-mx25/devices.h | 2 ++ arch/arm/plat-mxc/Kconfig | 1 + arch/arm/plat-mxc/audmux-v2.c | 15 +++++++++++- arch/arm/plat-mxc/include/mach/iomux-mx25.h | 4 +++ arch/arm/plat-mxc/include/mach/mx25.h | 7 +++++- 7 files changed, 83 insertions(+), 2 deletions(-) (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 84f0f1efea4..caeea755158 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -109,6 +109,16 @@ static unsigned long get_rate_uart(struct clk *clk) return get_rate_per(15); } +static unsigned long get_rate_ssi2(struct clk *clk) +{ + return get_rate_per(14); +} + +static unsigned long get_rate_ssi1(struct clk *clk) +{ + return get_rate_per(13); +} + static unsigned long get_rate_i2c(struct clk *clk) { return get_rate_per(6); @@ -171,6 +181,8 @@ static void clk_cgcr_disable(struct clk *clk) DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL); DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL); +DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); @@ -194,6 +206,9 @@ DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL); DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk); DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); +DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); +DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -228,6 +243,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK(NULL, "audmux", audmux_clk) }; int __init mx25_clocks_init(void) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index d9766d4d504..baf0a791364 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -533,3 +533,41 @@ struct platform_device mx25_kpp_device = { .num_resources = ARRAY_SIZE(mx25_kpp_resources), .resource = mx25_kpp_resources, }; + +static struct resource imx_ssi_resources0[] = { + { + .start = MX25_SSI1_BASE_ADDR, + .end = MX25_SSI1_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM, + }, { + .start = MX25_INT_SSI1, + .end = MX25_INT_SSI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource imx_ssi_resources1[] = { + { + .start = MX25_SSI2_BASE_ADDR, + .end = MX25_SSI2_BASE_ADDR + 0x3fff, + .flags = IORESOURCE_MEM + }, { + .start = MX25_INT_SSI2, + .end = MX25_INT_SSI2, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device imx_ssi_device0 = { + .name = "imx-ssi", + .id = 0, + .num_resources = ARRAY_SIZE(imx_ssi_resources0), + .resource = imx_ssi_resources0, +}; + +struct platform_device imx_ssi_device1 = { + .name = "imx-ssi", + .id = 1, + .num_resources = ARRAY_SIZE(imx_ssi_resources1), + .resource = imx_ssi_resources1, +}; diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 8247fd45111..290843bdddf 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -23,3 +23,5 @@ extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; extern struct platform_device mx25_kpp_device; +extern struct platform_device imx_ssi_device0; +extern struct platform_device imx_ssi_device1; diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 7f7ad6f289b..902ba9e42c5 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -25,6 +25,7 @@ config ARCH_MX25 select CPU_ARM926T select ARCH_MXC_IOMUX_V3 select HAVE_FB_IMX + select ARCH_MXC_AUDMUX_V2 help This enables support for systems based on the Freescale i.MX25 family diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index 0c2cc5cd4d8..ab94d78a927 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -191,6 +191,7 @@ static int mxc_audmux_v2_init(void) { int ret; +#if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); @@ -204,7 +205,19 @@ static int mxc_audmux_v2_init(void) } audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); } - +#endif +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) { + audmux_clk = clk_get(NULL, "audmux"); + if (IS_ERR(audmux_clk)) { + ret = PTR_ERR(audmux_clk); + printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, + ret); + return ret; + } + audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); + } +#endif audmux_debugfs_init(); return 0; diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index e88d01a125a..1c8317e8ecc 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -389,15 +389,19 @@ #define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL) +#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) #define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL) #define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index f064ec8833b..a1ba9d7c55d 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -29,19 +29,24 @@ #define MX25_UART1_BASE_ADDR 0x43f90000 #define MX25_UART2_BASE_ADDR 0x43f94000 +#define MX25_AUDMUX_BASE_ADDR 0x43fb0000 #define MX25_FEC_BASE_ADDR 0x50038000 +#define MX25_SSI2_BASE_ADDR 0x50014000 +#define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 #define MX25_KPP_BASE_ADDR 0x43fa8000 #define MX25_OTG_BASE_ADDR 0x53ff4000 +#define MX25_INT_SSI2 11 +#define MX25_INT_SSI1 12 #define MX25_INT_DRYICE 25 -#define MX25_INT_FEC 57 #define MX25_INT_NANDFC 33 #define MX25_INT_LCDC 39 #define MX25_INT_KPP 24 +#define MX25_INT_FEC 57 #if defined(IMX_NEEDS_DEPRECATED_SYMBOLS) #define UART1_BASE_ADDR MX25_UART1_BASE_ADDR -- cgit v1.2.3-70-g09d2 From fa94f8dce1459eef1f0f8d5b1e4f26c3f058dec2 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Thu, 24 Jun 2010 21:11:28 +0800 Subject: mxc: add common debug board for 3-stack platforms The debug board is little different for all mxc 3-stack(PDK) platforms, it is possible here to add a common implementation to support this board. Signed-off-by: Jason Wang Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/3ds_debugboard.c | 202 ++++++++++++++++++++++++ arch/arm/plat-mxc/Kconfig | 11 ++ arch/arm/plat-mxc/Makefile | 1 + arch/arm/plat-mxc/include/mach/3ds_debugboard.h | 18 +++ 4 files changed, 232 insertions(+) create mode 100644 arch/arm/plat-mxc/3ds_debugboard.c create mode 100644 arch/arm/plat-mxc/include/mach/3ds_debugboard.h (limited to 'arch/arm/plat-mxc/Kconfig') diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c new file mode 100644 index 00000000000..639c54a0799 --- /dev/null +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -0,0 +1,202 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2010 Jason Wang + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* LAN9217 ethernet base address */ +#define LAN9217_BASE_ADDR(n) (n + 0x0) +/* External UART */ +#define UARTA_BASE_ADDR(n) (n + 0x8000) +#define UARTB_BASE_ADDR(n) (n + 0x10000) + +#define BOARD_IO_ADDR(n) (n + 0x20000) +/* LED switchs */ +#define LED_SWITCH_REG 0x00 +/* buttons */ +#define SWITCH_BUTTONS_REG 0x08 +/* status, interrupt */ +#define INTR_STATUS_REG 0x10 +#define INTR_MASK_REG 0x38 +#define INTR_RESET_REG 0x20 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER1_REG 0x40 +#define MAGIC_NUMBER2_REG 0x48 +/* CPLD code version */ +#define CPLD_CODE_VER_REG 0x50 +/* magic word for debug CPLD */ +#define MAGIC_NUMBER3_REG 0x58 +/* module reset register*/ +#define MODULE_RESET_REG 0x60 +/* CPU ID and Personality ID */ +#define MCU_BOARD_ID_REG 0x68 + +#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START) +#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS) + +#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) +#define MXC_MAX_EXP_IO_LINES 16 + +/* interrupts like external uart , external ethernet etc*/ +#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0) +#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1) +#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2) +#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3) +#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4) + +static void __iomem *brd_io; +static void expio_ack_irq(u32 irq); + +static struct resource smsc911x_resources[] = { + { + .flags = IORESOURCE_MEM, + } , { + .start = EXPIO_INT_ENET, + .end = EXPIO_INT_ENET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY, +}; + +static struct platform_device smsc_lan9217_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &smsc911x_config, + }, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, +}; + +static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 imr_val; + u32 int_valid; + u32 expio_irq; + + desc->chip->mask(irq); /* irq = gpio irq number */ + + imr_val = __raw_readw(brd_io + INTR_MASK_REG); + int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; + + expio_irq = MXC_BOARD_IRQ_START; + for (; int_valid != 0; int_valid >>= 1, expio_irq++) { + struct irq_desc *d; + if ((int_valid & 1) == 0) + continue; + d = irq_desc + expio_irq; + if (unlikely(!(d->handle_irq))) + pr_err("\nEXPIO irq: %d unhandled\n", expio_irq); + else + d->handle_irq(expio_irq, d); + } + + desc->chip->ack(irq); + desc->chip->unmask(irq); +} + +/* + * Disable an expio pin's interrupt by setting the bit in the imr. + * Irq is an expio virtual irq number + */ +static void expio_mask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg |= (1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static void expio_ack_irq(u32 irq) +{ + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + __raw_writew(1 << expio, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + expio_mask_irq(irq); +} + +static void expio_unmask_irq(u32 irq) +{ + u16 reg; + u32 expio = MXC_IRQ_TO_EXPIO(irq); + + reg = __raw_readw(brd_io + INTR_MASK_REG); + reg &= ~(1 << expio); + __raw_writew(reg, brd_io + INTR_MASK_REG); +} + +static struct irq_chip expio_irq_chip = { + .ack = expio_ack_irq, + .mask = expio_mask_irq, + .unmask = expio_unmask_irq, +}; + +int __init mxc_expio_init(u32 base, u32 p_irq) +{ + int i; + + brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); + if (brd_io == NULL) + return -ENOMEM; + + if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) || + (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) || + (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) { + pr_info("3-Stack Debug board not detected\n"); + iounmap(brd_io); + brd_io = NULL; + return -ENODEV; + } + + pr_info("3-Stack Debug board detected, rev = 0x%04X\n", + readw(brd_io + CPLD_CODE_VER_REG)); + + /* + * Configure INT line as GPIO input + */ + gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq"); + gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq)); + + /* disable the interrupt and clear the status */ + __raw_writew(0, brd_io + INTR_MASK_REG); + __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); + __raw_writew(0, brd_io + INTR_RESET_REG); + __raw_writew(0x1F, brd_io + INTR_MASK_REG); + for (i = MXC_EXP_IO_BASE; + i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { + set_irq_chip(i, &expio_irq_chip); + set_irq_handler(i, handle_level_irq); + set_irq_flags(i, IRQF_VALID); + } + set_irq_type(p_irq, IRQF_TRIGGER_LOW); + set_irq_chained_handler(p_irq, mxc_expio_irq_handler); + + /* Register Lan device on the debugboard */ + smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); + smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + platform_device_register(&smsc_lan9217_device); + + return 0; +} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 20b2e79e54f..0527e65318f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -80,6 +80,17 @@ config MXC_PWM help Enable support for the i.MX PWM controller(s). +config MXC_DEBUG_BOARD + bool "Enable MXC debug board(for 3-stack)" + help + The debug board is an integral part of the MXC 3-stack(PDK) + platforms, it can be attached or removed from the peripheral + board. On debug board, several debug devices(ethernet, UART, + buttons, LEDs and JTAG) are implemented. Between the MCU and + these devices, a CPLD is added as a bridge which performs + data/address de-multiplexing and decode, signal level shift, + interrupt control and various board functions. + config MXC_ULPI bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index c7506a80eb3..78d405ed861 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o +obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o ifdef CONFIG_SND_IMX_SOC obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h new file mode 100644 index 00000000000..a384fdd49c6 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h @@ -0,0 +1,18 @@ +/* + * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_3DS_DB_H__ +#define __ASM_ARCH_MXC_3DS_DB_H__ + +extern int __init mxc_expio_init(u32 base, u32 p_irq); + +#endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ -- cgit v1.2.3-70-g09d2