From 4283dbb3e3b9b42c6f52f33d0de985e4f8ce928f Mon Sep 17 00:00:00 2001 From: Torben Hohn Date: Wed, 18 Jul 2012 14:58:25 +0200 Subject: arm imx31: add a few pinmux settings the tt01 needs These are the Pinmux Settings for the PP4 SSI Port multiplexible onto the first UART Pins. Signed-off-by: Torben Hohn Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-mx3.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/arm/plat-mxc') diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index d8b65b51f2a..f79f78a1c0e 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -512,12 +512,16 @@ enum iomux_pins { #define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1) #define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS1__SFS IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_ALT2) #define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_TXD1__SCK IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RXD1__STXDA IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_ALT2) #define MX31_PIN_DCD_DCE1__DCD_DCE1 IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC) #define MX31_PIN_RI_DCE1__RI_DCE1 IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC) #define MX31_PIN_DSR_DCE1__DSR_DCE1 IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC) #define MX31_PIN_DTR_DCE1__DTR_DCE1 IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_DTR_DCE1__SRXDA IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_CTS2__CTS2 IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_RTS2__RTS2 IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC) #define MX31_PIN_TXD2__TXD2 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC) @@ -721,6 +725,7 @@ enum iomux_pins { #define MX31_PIN_KEY_ROW2_KEY_ROW2 IOMUX_MODE(MX31_PIN_KEY_ROW2, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_ROW3_KEY_ROW3 IOMUX_MODE(MX31_PIN_KEY_ROW3, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_ROW4_KEY_ROW4 IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_FUNC) +#define MX31_PIN_KEY_ROW4_GPIO IOMUX_MODE(MX31_PIN_KEY_ROW4, IOMUX_CONFIG_GPIO) #define MX31_PIN_KEY_ROW5_KEY_ROW5 IOMUX_MODE(MX31_PIN_KEY_ROW5, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_ROW6_KEY_ROW6 IOMUX_MODE(MX31_PIN_KEY_ROW6, IOMUX_CONFIG_FUNC) #define MX31_PIN_KEY_ROW7_KEY_ROW7 IOMUX_MODE(MX31_PIN_KEY_ROW7, IOMUX_CONFIG_FUNC) -- cgit v1.2.3-70-g09d2 From 7095b95654302ceb8a011ee883d1500851061b0d Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Fri, 10 Aug 2012 12:53:24 +0100 Subject: ARM: mxc: ssi-fiq: Make ssi-fiq.S Thumb-2 compatible Because FIQ handlers get copied straight into the vectors page to the FIQ vector entry point, FIQ handlers in a Thumb-2 kernel must start in Thumb-2. A Thumb-2 kernel enters all exception vectors in Thumb-2. This patch adapts the mxc SSI FIQ code suitable for a Thumb-2 kernel. The code contained use of r13 (sp) which isn't allowed in Thumb-2. r11 and r13 have been swapped throughout the file to work around this. Currently, the way that the function to be copied is located using labels is a bit ugly: we cannot annotate the FIQ handler properly as a Thumb-2 function, because this would set bit 0 of the label address seen by the linker, causing off-by-one errors when copying the function. Ideally, the copy would be done with fncpy(), but this would require changes to the common set_fiq_handler() function. For now, we don't touch this. References to locally-defined global symbols with adr and ldr may not be accepted by the assembler in Thumb-2. Local shadow symbols are added to work around this. Signed-off-by: Dave Martin Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/ssi-fiq.S | 89 +++++++++++++++++++++++++-------------------- 1 file changed, 50 insertions(+), 39 deletions(-) (limited to 'arch/arm/plat-mxc') diff --git a/arch/arm/plat-mxc/ssi-fiq.S b/arch/arm/plat-mxc/ssi-fiq.S index 8397a2dd19f..a8b93c5f29b 100644 --- a/arch/arm/plat-mxc/ssi-fiq.S +++ b/arch/arm/plat-mxc/ssi-fiq.S @@ -34,91 +34,98 @@ .global imx_ssi_fiq_rx_buffer .global imx_ssi_fiq_tx_buffer +/* + * imx_ssi_fiq_start is _intentionally_ not marked as a function symbol + * using ENDPROC(). imx_ssi_fiq_start and imx_ssi_fiq_end are used to + * mark the function body so that it can be copied to the FIQ vector in + * the vectors page. imx_ssi_fiq_start should only be called as the result + * of an FIQ: calling it directly will not work. + */ imx_ssi_fiq_start: - ldr r12, imx_ssi_fiq_base + ldr r12, .L_imx_ssi_fiq_base /* TX */ - ldr r11, imx_ssi_fiq_tx_buffer + ldr r13, .L_imx_ssi_fiq_tx_buffer /* shall we send? */ - ldr r13, [r12, #SSI_SIER] - tst r13, #SSI_SIER_TFE0_EN + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_TFE0_EN beq 1f /* TX FIFO empty? */ - ldr r13, [r12, #SSI_SISR] - tst r13, #SSI_SISR_TFE0 + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_TFE0 beq 1f mov r10, #0x10000 sub r10, #1 and r10, r10, r8 /* r10: current buffer offset */ - add r11, r11, r10 + add r13, r13, r10 - ldrh r13, [r11] - strh r13, [r12, #SSI_STX0] + ldrh r11, [r13] + strh r11, [r12, #SSI_STX0] - ldrh r13, [r11, #2] - strh r13, [r12, #SSI_STX0] + ldrh r11, [r13, #2] + strh r11, [r12, #SSI_STX0] - ldrh r13, [r11, #4] - strh r13, [r12, #SSI_STX0] + ldrh r11, [r13, #4] + strh r11, [r12, #SSI_STX0] - ldrh r13, [r11, #6] - strh r13, [r12, #SSI_STX0] + ldrh r11, [r13, #6] + strh r11, [r12, #SSI_STX0] add r10, #8 - lsr r13, r8, #16 /* r13: buffer size */ - cmp r10, r13 - lslgt r8, r13, #16 + lsr r11, r8, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r8, r11, #16 addle r8, #8 1: /* RX */ /* shall we receive? */ - ldr r13, [r12, #SSI_SIER] - tst r13, #SSI_SIER_RFF0_EN + ldr r11, [r12, #SSI_SIER] + tst r11, #SSI_SIER_RFF0_EN beq 1f /* RX FIFO full? */ - ldr r13, [r12, #SSI_SISR] - tst r13, #SSI_SISR_RFF0 + ldr r11, [r12, #SSI_SISR] + tst r11, #SSI_SISR_RFF0 beq 1f - ldr r11, imx_ssi_fiq_rx_buffer + ldr r13, .L_imx_ssi_fiq_rx_buffer mov r10, #0x10000 sub r10, #1 and r10, r10, r9 /* r10: current buffer offset */ - add r11, r11, r10 + add r13, r13, r10 - ldr r13, [r12, #SSI_SACNT] - tst r13, #SSI_SACNT_AC97EN + ldr r11, [r12, #SSI_SACNT] + tst r11, #SSI_SACNT_AC97EN - ldr r13, [r12, #SSI_SRX0] - strh r13, [r11] + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13] - ldr r13, [r12, #SSI_SRX0] - strh r13, [r11, #2] + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #2] /* dummy read to skip slot 12 */ - ldrne r13, [r12, #SSI_SRX0] + ldrne r11, [r12, #SSI_SRX0] - ldr r13, [r12, #SSI_SRX0] - strh r13, [r11, #4] + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #4] - ldr r13, [r12, #SSI_SRX0] - strh r13, [r11, #6] + ldr r11, [r12, #SSI_SRX0] + strh r11, [r13, #6] /* dummy read to skip slot 12 */ - ldrne r13, [r12, #SSI_SRX0] + ldrne r11, [r12, #SSI_SRX0] add r10, #8 - lsr r13, r9, #16 /* r13: buffer size */ - cmp r10, r13 - lslgt r9, r13, #16 + lsr r11, r9, #16 /* r11: buffer size */ + cmp r10, r11 + lslgt r9, r11, #16 addle r9, #8 1: @@ -126,11 +133,15 @@ imx_ssi_fiq_start: subs pc, lr, #4 .align +.L_imx_ssi_fiq_base: imx_ssi_fiq_base: .word 0x0 +.L_imx_ssi_fiq_rx_buffer: imx_ssi_fiq_rx_buffer: .word 0x0 +.L_imx_ssi_fiq_tx_buffer: imx_ssi_fiq_tx_buffer: .word 0x0 +.L_imx_ssi_fiq_end: imx_ssi_fiq_end: -- cgit v1.2.3-70-g09d2