From bd5ce4332328c1fe473690a86b2e6a4157be038f Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 20 Jan 2009 12:06:01 +0800 Subject: [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support 1. introduce folder of 'arch/arm/plat-pxa' for common code across different PXA processor families 2. initially moved DMA code into plat-pxa 3. common code in moved into , new processors should implement its own , provide the following required definitions and '#include ' in the end: - DMAC_REGS_VIRT for mapped virtual address of the DMA registers' physical I/O memory Signed-off-by: Eric Miao --- arch/arm/plat-pxa/include/plat/dma.h | 85 ++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 arch/arm/plat-pxa/include/plat/dma.h (limited to 'arch/arm/plat-pxa/include') diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h new file mode 100644 index 00000000000..a7b91dc0685 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/dma.h @@ -0,0 +1,85 @@ +#ifndef __PLAT_DMA_H +#define __PLAT_DMA_H + +#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x)))) + +#define DCSR(n) DMAC_REG((n) << 2) +#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */ +#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */ +#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4)) +#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4)) +#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4)) +#define DCMD(n) DMAC_REG(0x020c + ((n) << 4)) +#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \ + (((n) & 0x3f) << 2)) + +#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ +#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ +#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ +#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ +#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ +#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ +#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ +#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ + +#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ +#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ +#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ +#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ +#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ +#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ +#define DCSR_EORINTR (1 << 9) /* The end of Receive */ + +#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ +#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ + +#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ +#define DDADR_STOP (1 << 0) /* Stop (read / write) */ + +#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ +#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ +#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ +#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ +#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ +#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ +#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ +#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ +#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ +#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ +#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ +#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ +#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ +#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ + +/* + * Descriptor structure for PXA's DMA engine + * Note: this structure must always be aligned to a 16-byte boundary. + */ + +typedef struct pxa_dma_desc { + volatile u32 ddadr; /* Points to the next descriptor + flags */ + volatile u32 dsadr; /* DSADR value for the current transfer */ + volatile u32 dtadr; /* DTADR value for the current transfer */ + volatile u32 dcmd; /* DCMD value for the current transfer */ +} pxa_dma_desc; + +typedef enum { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +} pxa_dma_prio; + +/* + * DMA registration + */ + +int __init pxa_init_dma(int irq, int num_ch); + +int pxa_request_dma (char *name, + pxa_dma_prio prio, + void (*irq_handler)(int, void *), + void *data); + +void pxa_free_dma (int dma_ch); + +#endif /* __PLAT_DMA_H */ -- cgit v1.2.3-70-g09d2