From d07e7ce9b6fd1a4ff0a6b40c74fbecdc584a135b Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Tue, 27 Apr 2010 15:55:21 +0900 Subject: ASoC: S3C: I2Sv2: Move defines closer to driver The header for I2Sv2 linux/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h contains only controller specific definitions and nothing SoC specific. So, it could be moved to sound/soc/s3c24xx/ Signed-off-by: Jassi Brar Acked-by: Ben Dooks Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- .../plat-samsung/include/plat/regs-s3c2412-iis.h | 82 ---------------------- 1 file changed, 82 deletions(-) delete mode 100644 arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h deleted file mode 100644 index abf2fbc2eb2..00000000000 --- a/arch/arm/plat-samsung/include/plat/regs-s3c2412-iis.h +++ /dev/null @@ -1,82 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h - * - * Copyright 2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2412 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H -#define __ASM_ARCH_REGS_S3C2412_IIS_H - -#define S3C2412_IISCON (0x00) -#define S3C2412_IISMOD (0x04) -#define S3C2412_IISFIC (0x08) -#define S3C2412_IISPSR (0x0C) -#define S3C2412_IISTXD (0x10) -#define S3C2412_IISRXD (0x14) - -#define S3C2412_IISCON_LRINDEX (1 << 11) -#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10) -#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9) -#define S3C2412_IISCON_TXFIFO_FULL (1 << 8) -#define S3C2412_IISCON_RXFIFO_FULL (1 << 7) -#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6) -#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5) -#define S3C2412_IISCON_TXCH_PAUSE (1 << 4) -#define S3C2412_IISCON_RXCH_PAUSE (1 << 3) -#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2) -#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1) -#define S3C2412_IISCON_IIS_ACTIVE (1 << 0) - -#define S3C64XX_IISMOD_BLC_16BIT (0 << 13) -#define S3C64XX_IISMOD_BLC_8BIT (1 << 13) -#define S3C64XX_IISMOD_BLC_24BIT (2 << 13) -#define S3C64XX_IISMOD_BLC_MASK (3 << 13) - -#define S3C64XX_IISMOD_IMS_PCLK (0 << 10) -#define S3C64XX_IISMOD_IMS_SYSMUX (1 << 10) - -#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10) -#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10) -#define S3C2412_IISMOD_SLAVE (2 << 10) -#define S3C2412_IISMOD_MASTER_MASK (3 << 10) -#define S3C2412_IISMOD_MODE_TXONLY (0 << 8) -#define S3C2412_IISMOD_MODE_RXONLY (1 << 8) -#define S3C2412_IISMOD_MODE_TXRX (2 << 8) -#define S3C2412_IISMOD_MODE_MASK (3 << 8) -#define S3C2412_IISMOD_LR_LLOW (0 << 7) -#define S3C2412_IISMOD_LR_RLOW (1 << 7) -#define S3C2412_IISMOD_SDF_IIS (0 << 5) -#define S3C2412_IISMOD_SDF_MSB (1 << 5) -#define S3C2412_IISMOD_SDF_LSB (2 << 5) -#define S3C2412_IISMOD_SDF_MASK (3 << 5) -#define S3C2412_IISMOD_RCLK_256FS (0 << 3) -#define S3C2412_IISMOD_RCLK_512FS (1 << 3) -#define S3C2412_IISMOD_RCLK_384FS (2 << 3) -#define S3C2412_IISMOD_RCLK_768FS (3 << 3) -#define S3C2412_IISMOD_RCLK_MASK (3 << 3) -#define S3C2412_IISMOD_BCLK_32FS (0 << 1) -#define S3C2412_IISMOD_BCLK_48FS (1 << 1) -#define S3C2412_IISMOD_BCLK_16FS (2 << 1) -#define S3C2412_IISMOD_BCLK_24FS (3 << 1) -#define S3C2412_IISMOD_BCLK_MASK (3 << 1) -#define S3C2412_IISMOD_8BIT (1 << 0) - -#define S3C64XX_IISMOD_CDCLKCON (1 << 12) - -#define S3C2412_IISPSR_PSREN (1 << 15) - -#define S3C2412_IISFIC_TXFLUSH (1 << 15) -#define S3C2412_IISFIC_RXFLUSH (1 << 7) -#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf) -#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf) - - - -#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */ - -- cgit v1.2.3-70-g09d2 From 9bbb851c7079ff670ba3fe6c7ce93bb5daa9a694 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 19:30:35 +0900 Subject: ARM: S3C24XX: Add initial s3c_gpio configuration code Add support for s3c_gpio_setcfg() and s3c_gpio_setpull() implementations to get ready for removal of the specific code being used by s3c24xx. Also rename the s3c_gpio_setcfg_s3c24xx_banka to s3c_gpio_setcfg_s3c24xx_a as seen in the header file to correct a build warning. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Kconfig | 1 + arch/arm/plat-s3c24xx/gpiolib.c | 17 ++++++++++++++++- arch/arm/plat-samsung/gpio-config.c | 4 ++-- arch/arm/plat-samsung/include/plat/gpio-core.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 6e93ef8f3d4..a830fad6f89 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4f0f11a6a67..376b061804c 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -21,6 +21,8 @@ #include #include +#include +#include #include #include #include @@ -77,10 +79,19 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) return IRQ_EINT8 + offset; } +static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c_gpio_setcfg_s3c24xx_a, +}; + +struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = s3c_gpio_setcfg_s3c24xx, +}; + struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C2410_GPACON, .pm = __gpio_pm(&s3c_gpio_pm_1bit), + .config = &s3c24xx_gpiocfg_banka, .chip = { .base = S3C2410_GPA(0), .owner = THIS_MODULE, @@ -168,8 +179,12 @@ static __init int s3c24xx_gpiolib_init(void) struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + s3c_gpiolib_add(chip); + } return 0; } diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 44a84e89654..c5832824e19 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -61,8 +61,8 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) +int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift = off; diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406a706..f0584f26d49 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,6 +108,9 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); +/* exported for core SoC support to change */ +extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; -- cgit v1.2.3-70-g09d2 From 1ec7269fd8b05044f2cb4059b679e053d57460f5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 May 2010 14:39:45 +0900 Subject: ARM: S3C24XX: Add the gpio pull configuration for pull-up Add the necessary gpio configuration helper for the devices which have a single-bit pull-up resistor disabled. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/s3c2410.c | 8 ++++++ arch/arm/mach-s3c2440/Kconfig | 1 + arch/arm/mach-s3c2440/s3c2440.c | 8 ++++++ arch/arm/plat-samsung/gpio-config.c | 32 ++++++++++++++++++++++ .../plat-samsung/include/plat/gpio-cfg-helpers.h | 11 ++++++++ 6 files changed, 61 insertions(+) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 554731868b0..9e5e96f12d8 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 91ba42f688a..adc90a3c589 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,10 @@ #include #include +#include +#include +#include + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -65,6 +70,9 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 7f465265cf0..9d102b91209 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2410_GPIO diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 2b68f7ea45a..d50f3ae6173 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -33,6 +34,10 @@ #include #include +#include +#include +#include + static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, }; @@ -41,6 +46,9 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index c5832824e19..8aca88d6c48 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -164,3 +164,35 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, return (__force s3c_gpio_pull_t)pup; } #endif + +#ifdef CONFIG_S3C_GPIO_PULL_UP +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup = __raw_readl(reg); + + if (pup == S3C_GPIO_PULL_UP) + pup &= ~(1 << off); + else if (pup == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP */ + diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index dda19da037a..885e9ac642d 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -145,6 +145,17 @@ extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, unsigned int off); +/** + * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-up resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1up. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. -- cgit v1.2.3-70-g09d2 From 97a339995fa6224487dc026e466f5bd1bbcaa3b2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 10:27:16 +0900 Subject: ARM: SAMSUNG: Add GPIO configuration read calls Add the necessary 1,2 and 4 bit configuration read calls for the new gpio code to allow removal of the old s3c24xx gpio code. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/gpiolib.c | 6 +++ arch/arm/mach-s5p6440/gpio.c | 5 +++ arch/arm/plat-s3c24xx/gpiolib.c | 2 + arch/arm/plat-samsung/gpio-config.c | 47 +++++++++++++++++++++- .../plat-samsung/include/plat/gpio-cfg-helpers.h | 41 +++++++++++++++++++ 5 files changed, 100 insertions(+), 1 deletion(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 66e6794481d..60c929a3cab 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -51,6 +51,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -58,12 +59,14 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { .cfg_eint = 7, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .cfg_eint = 3, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, @@ -171,6 +174,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -178,6 +182,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -185,6 +190,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index b0ea741177a..262dc75d5be 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -161,12 +161,15 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, }; @@ -279,6 +282,8 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; if (!chipcfg->set_pull) chipcfg->set_pull = s3c_gpio_setpull_updown; if (!chipcfg->get_pull) diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index e8c0e8a247b..4c0896f2572 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -81,10 +81,12 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { .set_config = s3c_gpio_setcfg_s3c24xx_a, + .get_config = s3c_gpio_getcfg_s3c24xx_a, }; struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }; struct s3c_gpio_chip s3c24xx_gpios[] = { diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 8aca88d6c48..19ab89df24c 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/gpio-config.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics + * Copyright 2008-2010 Simtec Electronics * Ben Dooks * http://armlinux.simtec.co.uk/ * @@ -87,6 +87,19 @@ int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, return 0; } +unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { @@ -109,6 +122,19 @@ int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, return 0; } + +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} #endif #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX @@ -134,6 +160,25 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, return 0; } + +unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 885e9ac642d..a8868c429f7 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -52,6 +52,18 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg + * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the + * S3C_GPIO_SPECIAL() macro. + */ +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) * @chip: The gpio chip that is being configured. @@ -65,6 +77,21 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa s3c_gpio_getcfg_s3c24xx + * @sa s3c_gpio_getcfg_s3c64xx_4bit + */ +extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. * @chip: The gpio chip that is being configured. @@ -85,6 +112,20 @@ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to s3c_gpio_setcfg_s3c64xx_4bit(). + * + * @sa s3c_gpio_getcfg_s3c24xx + */ +extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off); + /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440,S3C24A0 = Pull-UP, -- cgit v1.2.3-70-g09d2 From 9933847b29bb3d3447d19236375ccc84bfbcf3df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 10:50:42 +0900 Subject: ARM: S3C24XX: Remove s3c2410_gpio_getcfg(), implement s3c_gpio_getcfg() Add s3c_gpio_getcfg() and change anything using s3c2410_gpio_getcfg() to use this instead. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpio.c | 19 ------------------- arch/arm/plat-s3c24xx/pm.c | 4 ++-- arch/arm/plat-samsung/gpio-config.c | 20 ++++++++++++++++++++ .../arm/plat-samsung/include/plat/gpio-cfg-helpers.h | 6 ++++++ arch/arm/plat-samsung/include/plat/gpio-cfg.h | 11 +++++++++++ 5 files changed, 39 insertions(+), 21 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 24c00470b86..c7c0cd73b94 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -33,25 +33,6 @@ #include -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); - void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { void __iomem *base = S3C24XX_GPIO_BASE(pin); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 691fecc61d5..60627e63a25 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -98,11 +98,11 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) else irqstate = s3c_irqwake_eintmask & (1L<chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_getcfg(chip, offset); + local_irq_restore(flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + + int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index a8868c429f7..3e21c75feef 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -30,6 +30,12 @@ static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, return (chip->config->set_config)(chip, off, config); } +static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return (chip->config->get_config)(chip, off); +} + static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull) { diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cad..8d01e853df3 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -77,6 +77,17 @@ struct s3c_gpio_cfg { */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); +/** + * s3c_gpio_getcfg - Read the current function for a GPIO pin + * @pin: The pin to read the configuration value for. + * + * Read the configuration state of the given @pin, returning a value that + * could be passed back to s3c_gpio_cfgpin(). + * + * @sa s3c_gpio_cfgpin + */ +extern unsigned s3c_gpio_getcfg(unsigned int pin); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors -- cgit v1.2.3-70-g09d2 From e561aacc70716ff59b9359ba8f010609ee757241 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 18:10:02 +0900 Subject: ARM: SAMSUNG: Move S3C6400 PLL code to for re-use The S3C6400 EPLL code matches the S3C2416 and compatible SoCs, so move it from mach-s3c64xx into for easy reuse. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/include/mach/pll.h | 35 ++---------------- arch/arm/plat-samsung/include/plat/pll6553x.h | 51 +++++++++++++++++++++++++++ 2 files changed, 54 insertions(+), 32 deletions(-) create mode 100644 arch/arm/plat-samsung/include/plat/pll6553x.h (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h index 90bbd72fdc4..5ef0bb698ee 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ b/arch/arm/mach-s3c64xx/include/mach/pll.h @@ -20,6 +20,7 @@ #define S3C6400_PLL_SDIV_SHIFT (0) #include +#include static inline unsigned long s3c6400_get_pll(unsigned long baseclk, u32 pllcon) @@ -37,38 +38,8 @@ static inline unsigned long s3c6400_get_pll(unsigned long baseclk, return (unsigned long)fvco; } -#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) -#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) -#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) -#define S3C6400_EPLL_MDIV_SHIFT (16) -#define S3C6400_EPLL_PDIV_SHIFT (8) -#define S3C6400_EPLL_SDIV_SHIFT (0) -#define S3C6400_EPLL_KDIV_MASK (0xffff) - static inline unsigned long s3c6400_get_epll(unsigned long baseclk) { - unsigned long result; - u32 epll0 = __raw_readl(S3C_EPLL_CON0); - u32 epll1 = __raw_readl(S3C_EPLL_CON1); - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; - pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; - sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; - kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; + return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); } diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h new file mode 100644 index 00000000000..b8b7e1d884f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/pll6553x.h @@ -0,0 +1,51 @@ +/* arch/arm/plat-samsung/include/plat/pll6553x.h + * partially from arch/arm/mach-s3c64xx/include/mach/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Samsung PLL6553x PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ + +#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) +#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) +#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) +#define PLL6553X_KDIV_MASK (0xffff) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll0, u32 pll1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll1 & PLL6553X_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} -- cgit v1.2.3-70-g09d2 From 4e04691bc600b53f6aab63404e58fae3bdf8e310 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 28 Apr 2010 12:58:13 +0900 Subject: ARM: SAMSUNG: Add s3c_disable_clocks() and tidy init+disable usage Add s3c_disable_clocks() and change the clock registration code to use the s3c_register_clocks() followed by s3c_disable_clocks() instead of the loops it was using. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/clock.c | 27 ++++----------------------- arch/arm/plat-s3c24xx/s3c2410-clock.c | 15 +++------------ arch/arm/plat-samsung/clock.c | 15 +++++++++++++++ arch/arm/plat-samsung/include/plat/clock.h | 1 + 4 files changed, 23 insertions(+), 35 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 62cd4eaee01..76d8d66247c 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -492,7 +492,7 @@ static struct clk clk_prediv = { /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -761,9 +761,7 @@ void __init_or_cpufreq s3c2443_setup_clocks(void) void __init s3c2443_init_clocks(int xtal) { - struct clk *clkp; unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ret; int ptr; /* s3c2443 parents h and p clocks from prediv */ @@ -774,15 +772,7 @@ void __init s3c2443_init_clocks(int xtal) s3c2443_setup_clocks(); s3c2443_clk_initparents(); - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) s3c_register_clksrc(clksrcs[ptr], 1); @@ -819,17 +809,8 @@ void __init s3c2443_init_clocks(int xtal) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - (clkp->enable)(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_pwmclk_init(); } diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index b61bdb79373..9ecc5d91367 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -87,7 +87,7 @@ static int s3c2410_upll_enable(struct clk *clk, int enable) /* standard clock definitions */ -static struct clk init_clocks_disable[] = { +static struct clk init_clocks_off[] = { { .name = "nand", .id = -1, @@ -249,17 +249,8 @@ int __init s3c2410_baseclk_add(void) /* install (and disable) the clocks we do not need immediately */ - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2410_clkcon_enable(clkp, 0); - } + s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); /* show the clock-slow value */ diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 1b25c9d8c40..8bf79f3efdf 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -376,6 +376,21 @@ void __init s3c_register_clocks(struct clk *clkp, int nr_clks) } } +/** + * s3c_disable_clocks() - disable an array of clocks + * @clkp: Pointer to the first clock in the array. + * @nr_clks: Number of clocks to register. + * + * for internal use only at initialisation time. disable the clocks in the + * @clkp array. + */ + +void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) +{ + for (; nr_clks > 0; nr_clks--, clkp++) + (clkp->enable)(clkp, 0); +} + /* initalise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 60b62692ac7..12caf48a6bd 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -91,6 +91,7 @@ extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); extern void s3c_register_clocks(struct clk *clk, int nr_clks); +extern void s3c_disable_clocks(struct clk *clkp, int nr_clks); extern int s3c24xx_register_baseclocks(unsigned long xtal); -- cgit v1.2.3-70-g09d2 From f1290a49c5496521360a3e40d8bc766aceee65e5 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Wed, 28 Apr 2010 18:09:01 +0900 Subject: ARM: S3C2416: Add arch support Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks --- arch/arm/Kconfig | 3 +- arch/arm/Makefile | 2 +- arch/arm/mach-s3c2412/Kconfig | 3 +- arch/arm/mach-s3c2416/Kconfig | 25 +++ arch/arm/mach-s3c2416/Makefile | 18 ++ arch/arm/mach-s3c2416/irq.c | 254 +++++++++++++++++++++++++++ arch/arm/mach-s3c2416/s3c2416.c | 115 ++++++++++++ arch/arm/plat-s3c24xx/cpu.c | 13 ++ arch/arm/plat-s3c24xx/include/plat/s3c2416.h | 31 ++++ arch/arm/plat-samsung/include/plat/cpu.h | 1 + 10 files changed, 462 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-s3c2416/Kconfig create mode 100644 arch/arm/mach-s3c2416/Makefile create mode 100644 arch/arm/mach-s3c2416/irq.c create mode 100644 arch/arm/mach-s3c2416/s3c2416.c create mode 100644 arch/arm/plat-s3c24xx/include/plat/s3c2416.h (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 92622eb5cc0..6785c33908b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -647,7 +647,7 @@ config ARCH_SA1100 Support for StrongARM 11x0 based boards. config ARCH_S3C2410 - bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" + bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK @@ -892,6 +892,7 @@ if ARCH_S3C2410 source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" +source "arch/arm/mach-s3c2416/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index ed820e737a8..15947397e12 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,7 @@ machine-$(CONFIG_ARCH_PNX4008) := pnx4008 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P6440) := s5p6440 diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index 9a8c0657ae5..cef6a65637b 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,8 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412 + !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 config S3C2412_DMA diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig new file mode 100644 index 00000000000..cc320f6b737 --- /dev/null +++ b/arch/arm/mach-s3c2416/Kconfig @@ -0,0 +1,25 @@ +# arch/arm/mach-s3c2416/Kconfig +# +# Copyright 2009 Yauhen Kharuzhy +# +# Licensed under GPLv2 + +config CPU_S3C2416 + bool + depends on ARCH_S3C2410 + select CPU_ARM926T + select S3C2416_DMA if S3C2410_DMA + select CPU_LLSERIAL_S3C2440 + help + Support for the S3C2416 SoC from the S3C24XX line + +config S3C2416_DMA + bool + depends on CPU_S3C2416 + help + Internal config node for S3C2416 DMA support + +menu "S3C2416 Machines" + + +endmenu diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile new file mode 100644 index 00000000000..34bb70d44d5 --- /dev/null +++ b/arch/arm/mach-s3c2416/Makefile @@ -0,0 +1,18 @@ +# arch/arm/mach-s3c2416/Makefile +# +# Copyright 2009 Yauhen Kharuzhy +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += irq.o + +#obj-$(CONFIG_S3C2416_DMA) += dma.o + +# Machine support + diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c new file mode 100644 index 00000000000..89f521d59d0 --- /dev/null +++ b/arch/arm/mach-s3c2416/irq.c @@ -0,0 +1,254 @@ +/* linux/arch/arm/mach-s3c2416/irq.c + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * +*/ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include +#include +#include + +#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1) + +static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len) +{ + unsigned int subsrc, submsk; + unsigned int end; + + /* read the current pending interrupts, and the mask + * for what it is available */ + + subsrc = __raw_readl(S3C2410_SUBSRCPND); + submsk = __raw_readl(S3C2410_INTSUBMSK); + + subsrc &= ~submsk; + subsrc >>= (irq - S3C2410_IRQSUB(0)); + subsrc &= (1 << len)-1; + + end = len + irq; + + for (; irq < end && subsrc; irq++) { + if (subsrc & 1) + generic_handle_irq(irq); + + subsrc >>= 1; + } +} + +/* WDT/AC97 sub interrupts */ + +static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_WDT, 4); +} + +#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0)) +#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97) + +static void s3c2416_irq_wdtac97_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_WDTAC97); +} + +static void s3c2416_irq_wdtac97_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97); +} + +static struct irq_chip s3c2416_irq_wdtac97 = { + .mask = s3c2416_irq_wdtac97_mask, + .unmask = s3c2416_irq_wdtac97_unmask, + .ack = s3c2416_irq_wdtac97_ack, +}; + + +/* LCD sub interrupts */ + +static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4); +} + +#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) +#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4) + +static void s3c2416_irq_lcd_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static void s3c2416_irq_lcd_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_LCD); +} + +static void s3c2416_irq_lcd_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD); +} + +static struct irq_chip s3c2416_irq_lcd = { + .mask = s3c2416_irq_lcd_mask, + .unmask = s3c2416_irq_lcd_unmask, + .ack = s3c2416_irq_lcd_ack, +}; + + +/* DMA sub interrupts */ + +static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6); +} + +#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0)) +#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5) + + +static void s3c2416_irq_dma_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static void s3c2416_irq_dma_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_DMA); +} + +static void s3c2416_irq_dma_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA); +} + +static struct irq_chip s3c2416_irq_dma = { + .mask = s3c2416_irq_dma_mask, + .unmask = s3c2416_irq_dma_unmask, + .ack = s3c2416_irq_dma_ack, +}; + + +/* UART3 sub interrupts */ + +static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc) +{ + s3c2416_irq_demux(IRQ_S3C2443_UART3, 3); +} + +#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0)) +#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0))) + + +static void s3c2416_irq_uart3_mask(unsigned int irqno) +{ + s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static void s3c2416_irq_uart3_unmask(unsigned int irqno) +{ + s3c_irqsub_unmask(irqno, INTMSK_UART3); +} + +static void s3c2416_irq_uart3_ack(unsigned int irqno) +{ + s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3); +} + +static struct irq_chip s3c2416_irq_uart3 = { + .mask = s3c2416_irq_uart3_mask, + .unmask = s3c2416_irq_uart3_unmask, + .ack = s3c2416_irq_uart3_ack, +}; + + +/* IRQ initialisation code */ + +static int __init s3c2416_add_sub(unsigned int base, + void (*demux)(unsigned int, + struct irq_desc *), + struct irq_chip *chip, + unsigned int start, unsigned int end) +{ + unsigned int irqno; + + set_irq_chip(base, &s3c_irq_level_chip); + set_irq_handler(base, handle_level_irq); + set_irq_chained_handler(base, demux); + + for (irqno = start; irqno <= end; irqno++) { + set_irq_chip(irqno, chip); + set_irq_handler(irqno, handle_level_irq); + set_irq_flags(irqno, IRQF_VALID); + } + + return 0; +} + +static int __init s3c2416_irq_add(struct sys_device *sysdev) +{ + printk(KERN_INFO "S3C2416: IRQ Support\n"); + + s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd, + IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4); + + s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma, + &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5); + + s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3, + &s3c2416_irq_uart3, + IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3); + + s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97, + &s3c2416_irq_wdtac97, + IRQ_S3C2443_WDT, IRQ_S3C2443_AC97); + + return 0; +} + +static struct sysdev_driver s3c2416_irq_driver = { + .add = s3c2416_irq_add, +}; + +static int __init s3c2416_irq_init(void) +{ + return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_irq_driver); +} + +arch_initcall(s3c2416_irq_init); + diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c new file mode 100644 index 00000000000..6165dc7010f --- /dev/null +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -0,0 +1,115 @@ +/* linux/arch/arm/mach-s3c2416/s3c2416.c + * + * Copyright (c) 2009 Yauhen Kharuzhy , + * as part of OpenInkpot project + * Copyright (c) 2009 Promwad Innovation Company + * Yauhen Kharuzhy + * + * Samsung S3C2416 Mobile CPU support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +static struct map_desc s3c2416_iodesc[] __initdata = { + IODESC_ENT(WATCHDOG), + IODESC_ENT(CLKPWR), + IODESC_ENT(TIMER), +}; + +struct sysdev_class s3c2416_sysclass = { + .name = "s3c2416-core", +}; + +static struct sys_device s3c2416_sysdev = { + .cls = &s3c2416_sysclass, +}; + +static void s3c2416_hard_reset(void) +{ + __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST); +} + +int __init s3c2416_init(void) +{ + printk(KERN_INFO "S3C2416: Initializing architecture\n"); + + s3c24xx_reset_hook = s3c2416_hard_reset; + /* s3c24xx_idle = s3c2416_idle; */ + + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + + return sysdev_register(&s3c2416_sysdev); +} + +void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); + + s3c_device_nand.name = "s3c2416-nand"; +} + +/* s3c2416_map_io + * + * register the standard cpu IO areas, and any passed in from the + * machine specific initialisation. + */ + +void __init s3c2416_map_io(void) +{ + iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); +} + +/* need to register class before we actually register the device, and + * we also need to ensure that it has been initialised before any of the + * drivers even try to use it (even if not on an s3c2416 based system) + * as a driver which may support both 2443 and 2440 may try and use it. +*/ + +static int __init s3c2416_core_init(void) +{ + return sysdev_class_register(&s3c2416_sysclass); +} + +core_initcall(s3c2416_core_init); diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 9ca64df35bf..494f4f3a933 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include @@ -57,6 +58,7 @@ static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; +static const char name_s3c2416[] = "S3C2416"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; static const char name_s3c2442b[] = "S3C2442B"; @@ -137,6 +139,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2412_init, .name = name_s3c2412, }, + { /* a strange version of the s3c2416 */ + .idcode = 0x32450003, + .idmask = 0xffffffff, + .map_io = s3c2416_map_io, + .init_clocks = s3c2416_init_clocks, + .init_uarts = s3c2416_init_uarts, + .init = s3c2416_init, + .name = name_s3c2416, + }, { .idcode = 0x32443001, .idmask = 0xffffffff, @@ -172,6 +183,8 @@ static unsigned long s3c24xx_read_idcode_v5(void) { #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) return __raw_readl(S3C2412_GSTATUS1); +#elif defined(CONFIG_CPU_S3C2416) + return __raw_readl(S3C24XX_GSTATUS1); #else return 1UL; /* don't look like an 2400 */ #endif diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h new file mode 100644 index 00000000000..dc3c0907d22 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2416.h @@ -0,0 +1,31 @@ +/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h + * + * Copyright (c) 2009 Yauhen Kharuzhy + * + * Header file for s3c2416 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C2416 + +struct s3c2410_uartcfg; + +extern int s3c2416_init(void); + +extern void s3c2416_map_io(void); + +extern void s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no); + +extern void s3c2416_init_clocks(int xtal); + +extern int s3c2416_baseclk_add(void); + +#else +#define s3c2416_init_clocks NULL +#define s3c2416_init_uarts NULL +#define s3c2416_map_io NULL +#define s3c2416_init NULL +#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f..5dbeb7991e6 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -73,6 +73,7 @@ extern struct sys_timer s3c24xx_timer; extern struct sysdev_class s3c2410_sysclass; extern struct sysdev_class s3c2410a_sysclass; extern struct sysdev_class s3c2412_sysclass; +extern struct sysdev_class s3c2416_sysclass; extern struct sysdev_class s3c2440_sysclass; extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; -- cgit v1.2.3-70-g09d2 From a8cd4561ea176f51e9f4707873ca4eff8fd5ee70 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 10 May 2010 14:51:19 +0530 Subject: fix "seperate" typos in comments s/seperate/separate Signed-off-by: Anand Gadiyar Signed-off-by: Jiri Kosina --- Documentation/filesystems/logfs.txt | 8 ++++---- arch/arm/mach-s3c2443/clock.c | 2 +- arch/arm/plat-samsung/include/plat/gpio-core.h | 2 +- drivers/usb/host/ehci-omap.c | 2 +- fs/logfs/dir.c | 2 +- fs/logfs/logfs.h | 2 +- fs/logfs/logfs_abi.h | 10 +++++----- 7 files changed, 14 insertions(+), 14 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/Documentation/filesystems/logfs.txt b/Documentation/filesystems/logfs.txt index e64c94ba401..bca42c22a14 100644 --- a/Documentation/filesystems/logfs.txt +++ b/Documentation/filesystems/logfs.txt @@ -59,7 +59,7 @@ Levels ------ Garbage collection (GC) may fail if all data is written -indiscriminately. One requirement of GC is that data is seperated +indiscriminately. One requirement of GC is that data is separated roughly according to the distance between the tree root and the data. Effectively that means all file data is on level 0, indirect blocks are on levels 1, 2, 3 4 or 5 for 1x, 2x, 3x, 4x or 5x indirect blocks, @@ -67,7 +67,7 @@ respectively. Inode file data is on level 6 for the inodes and 7-11 for indirect blocks. Each segment contains objects of a single level only. As a result, -each level requires its own seperate segment to be open for writing. +each level requires its own separate segment to be open for writing. Inode File ---------- @@ -106,9 +106,9 @@ Vim --- By cleverly predicting the life time of data, it is possible to -seperate long-living data from short-living data and thereby reduce +separate long-living data from short-living data and thereby reduce the GC overhead later. Each type of distinc life expectency (vim) can -have a seperate segment open for writing. Each (level, vim) tupel can +have a separate segment open for writing. Each (level, vim) tupel can be open just once. If an open segment with unknown vim is encountered at mount time, it is closed and ignored henceforth. diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 62cd4eaee01..8a55e78f709 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -391,7 +391,7 @@ static struct clk clk_hsmmc = { /* i2s_eplldiv * - * This clock is the output from the I2S divisor of ESYSCLK, and is seperate + * This clock is the output from the I2S divisor of ESYSCLK, and is separate * from the mux that comes after it (cannot merge into one single clock) */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406a706..16643e3029f 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -97,7 +97,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); * others = Special functions (dependant on bank) * * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of function + * registers instead of one, we do not have a separate set of function * (samsung_gpiolib_add_4bit2_chips)for each case. */ extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a67a0030dd5..bed6de342ec 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -181,7 +181,7 @@ struct ehci_hcd_omap { void __iomem *ehci_base; /* Regulators for USB PHYs. - * Each PHY can have a seperate regulator. + * Each PHY can have a separate regulator. */ struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c index 2396a85c0f5..72d1893ddd3 100644 --- a/fs/logfs/dir.c +++ b/fs/logfs/dir.c @@ -12,7 +12,7 @@ * Atomic dir operations * * Directory operations are by default not atomic. Dentries and Inodes are - * created/removed/altered in seperate operations. Therefore we need to do + * created/removed/altered in separate operations. Therefore we need to do * a small amount of journaling. * * Create, link, mkdir, mknod and symlink all share the same function to do diff --git a/fs/logfs/logfs.h b/fs/logfs/logfs.h index 0a3df1a0c93..9028d7f83bb 100644 --- a/fs/logfs/logfs.h +++ b/fs/logfs/logfs.h @@ -704,7 +704,7 @@ static inline gc_level_t expand_level(u64 ino, level_t __level) u8 level = (__force u8)__level; if (ino == LOGFS_INO_MASTER) { - /* ifile has seperate areas */ + /* ifile has separate areas */ level += LOGFS_MAX_LEVELS; } return (__force gc_level_t)level; diff --git a/fs/logfs/logfs_abi.h b/fs/logfs/logfs_abi.h index f674725663f..ae960519c54 100644 --- a/fs/logfs/logfs_abi.h +++ b/fs/logfs/logfs_abi.h @@ -50,9 +50,9 @@ static inline void check_##type(void) \ * 12 - gc recycled blocks, long-lived data * 13 - replacement blocks, short-lived data * - * Levels 1-11 are necessary for robust gc operations and help seperate + * Levels 1-11 are necessary for robust gc operations and help separate * short-lived metadata from longer-lived file data. In the future, - * file data should get seperated into several segments based on simple + * file data should get separated into several segments based on simple * heuristics. Old data recycled during gc operation is expected to be * long-lived. New data is of uncertain life expectancy. New data * used to replace older blocks in existing files is expected to be @@ -117,7 +117,7 @@ static inline void check_##type(void) \ #define pure_ofs(ofs) (ofs & ~LOGFS_FULLY_POPULATED) /* - * LogFS needs to seperate data into levels. Each level is defined as the + * LogFS needs to separate data into levels. Each level is defined as the * maximal possible distance from the master inode (inode of the inode file). * Data blocks reside on level 0, 1x indirect block on level 1, etc. * Inodes reside on level 6, indirect blocks for the inode file on levels 7-11. @@ -204,7 +204,7 @@ SIZE_CHECK(logfs_segment_header, LOGFS_SEGMENT_HEADERSIZE); * @ds_crc: crc32 of structure starting with the next field * @ds_ifile_levels: maximum number of levels for ifile * @ds_iblock_levels: maximum number of levels for regular files - * @ds_data_levels: number of seperate levels for data + * @ds_data_levels: number of separate levels for data * @pad0: reserved, must be 0 * @ds_feature_incompat: incompatible filesystem features * @ds_feature_ro_compat: read-only compatible filesystem features @@ -456,7 +456,7 @@ enum logfs_vim { * @vim: life expectancy of data * * "Areas" are segments currently being used for writing. There is at least - * one area per GC level. Several may be used to seperate long-living from + * one area per GC level. Several may be used to separate long-living from * short-living data. If an area with unknown vim is encountered, it can * simply be closed. * The write buffer immediately follow this header. -- cgit v1.2.3-70-g09d2 From fcef85c0c122f90f57f2f3ef0caeaf6404d6e8f3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 15:42:23 +0900 Subject: ARM: SAMSUNG: Add spinlock locking to GPIO banks Add locking to each GPIO bank to allow for SMP capable code to use the gpiolib functions. See the gpio-core.h header file for more information. Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/gpio-config.c | 12 ++++++------ arch/arm/plat-samsung/gpio.c | 15 +++++++++------ arch/arm/plat-samsung/include/plat/gpio-core.h | 14 ++++++++++++++ 3 files changed, 29 insertions(+), 12 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 3282db360fa..a76eef53339 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -33,9 +33,9 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setcfg(chip, offset, config); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } @@ -51,9 +51,9 @@ unsigned s3c_gpio_getcfg(unsigned int pin) if (chip) { offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_getcfg(chip, offset); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); } return ret; @@ -72,9 +72,9 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setpull(chip, offset, pull); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index 28d2ab8a08d..b83a83351ce 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -52,14 +53,14 @@ static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) unsigned long flags; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); con = __raw_readl(base + 0x00); con &= ~(3 << (offset * 2)); __raw_writel(con, base + 0x00); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -72,7 +73,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, unsigned long dat; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -87,7 +88,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, __raw_writel(con, base + 0x00); __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -99,7 +100,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, unsigned long flags; unsigned long dat; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -107,7 +108,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, dat |= 1 << offset; __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); } static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) @@ -131,6 +132,8 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) BUG_ON(!gc->label); BUG_ON(!gc->ngpio); + spin_lock_init(&chip->lock); + if (!gc->direction_input) gc->direction_input = s3c_gpiolib_input; if (!gc->direction_output) diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index f0584f26d49..f3a68d1a07b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -44,16 +44,26 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. + * + * The lock protects each gpio bank from multiple access of the shared + * configuration registers, or from reading of data whilst another thread + * is writing to the register set. + * + * Each chip has its own lock to avoid any contention between different + * CPU cores trying to get one lock for different GPIO banks, where each + * bank of GPIO has its own register space and configuration registers. */ struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; #endif @@ -138,3 +148,7 @@ extern struct s3c_gpio_pm s3c_gpio_pm_4bit; #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ + +/* locking wrappers to deal with multiple access to the same gpio bank */ +#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) -- cgit v1.2.3-70-g09d2 From 0ad73cefa2ec509126af466718e0c3cb1ad8ae9b Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 11 May 2010 09:56:37 +0900 Subject: ARM: SAMSUNG: Remove static of S5P SoCs sysclass This patch removes static of s5p6440_sysclass, s5p6442_sysclass, and s5pv210_sysclass for defintion as extern. Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks --- arch/arm/mach-s5p6440/cpu.c | 2 +- arch/arm/mach-s5p6442/cpu.c | 2 +- arch/arm/mach-s5pv210/cpu.c | 2 +- arch/arm/plat-samsung/include/plat/cpu.h | 3 +++ 4 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 1794131aeac..ca3b3206e6f 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -88,7 +88,7 @@ void __init s5p6440_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5p6440_sysclass = { +struct sysdev_class s5p6440_sysclass = { .name = "s5p6440-core", }; diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index bc2524df89b..a48fb553fd0 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -95,7 +95,7 @@ void __init s5p6442_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5p6442_sysclass = { +struct sysdev_class s5p6442_sysclass = { .name = "s5p6442-core", }; diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 0e0f8fde2aa..2b776eb5d15 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -100,7 +100,7 @@ void __init s5pv210_init_irq(void) s5p_init_irq(vic, ARRAY_SIZE(vic)); } -static struct sysdev_class s5pv210_sysclass = { +struct sysdev_class s5pv210_sysclass = { .name = "s5pv210-core", }; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index d316b4a579f..c54f318991b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -78,6 +78,9 @@ extern struct sysdev_class s3c2442_sysclass; extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; +extern struct sysdev_class s5p6440_sysclass; +extern struct sysdev_class s5p6442_sysclass; +extern struct sysdev_class s5pv210_sysclass; extern void (*s5pc1xx_idle)(void); -- cgit v1.2.3-70-g09d2 From 6cd82ffe0cd3836b32b29bd1436e5fd551957d54 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Tue, 4 May 2010 13:12:32 +0200 Subject: ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung Move HWMON platform definition from plat-s3c24xx to plat-samsung and adjust mach-bast to use the new s3c_hwmon_set_platdata(). This allows usage of dev-hwmon by other Samsung SoCs. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/mach-bast.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 8 ------ arch/arm/plat-samsung/Kconfig | 5 ++++ arch/arm/plat-samsung/Makefile | 1 + arch/arm/plat-samsung/dev-hwmon.c | 42 ++++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/hwmon.h | 10 +++++++ 7 files changed, 60 insertions(+), 9 deletions(-) create mode 100644 arch/arm/plat-samsung/dev-hwmon.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 554731868b0..ca5c3c62f37 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -110,6 +110,7 @@ config ARCH_BAST select MACH_BAST_IDE select S3C24XX_DCLK select ISA + select S3C_DEV_HWMON select S3C_DEV_USB_HOST select S3C_DEV_NAND help diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 02b1b6220cb..c8786df72b9 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -634,7 +634,7 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_device_hwmon.dev.platform_data = &bast_hwmon_info; + s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 9265f09bfa5..3166f320fd6 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -338,14 +338,6 @@ struct platform_device s3c_device_adc = { .resource = s3c_adc_resource, }; -/* HWMON */ - -struct platform_device s3c_device_hwmon = { - .name = "s3c-hwmon", - .id = -1, - .dev.parent = &s3c_device_adc.dev, -}; - /* SDI */ static struct resource s3c_sdi_resource[] = { diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index d552c65fa1b..7a36cf85e13 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -160,6 +160,11 @@ config S3C_DEV_HSMMC2 help Compile in platform device definitions for HSMMC channel 2 +config S3C_DEV_HWMON + bool + help + Compile in platform device definitions for HWMON + config S3C_DEV_I2C1 bool help diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 22c89d08f6e..0ad820acc38 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_S3C_ADC) += adc.o obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o +obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o obj-y += dev-i2c0.o obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c new file mode 100644 index 00000000000..b3ffb958725 --- /dev/null +++ b/arch/arm/plat-samsung/dev-hwmon.c @@ -0,0 +1,42 @@ +/* linux/arch/arm/plat-samsung/dev-hwmon.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Adapted for HWMON by Maurus Cuelenaere + * + * Samsung series device definition for HWMON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include + +#include +#include + +struct platform_device s3c_device_hwmon = { + .name = "s3c-hwmon", + .id = -1, + .dev.parent = &s3c_device_adc.dev, +}; + +void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) +{ + struct s3c_hwmon_pdata *npd; + + if (!pd) { + printk(KERN_ERR "%s: no platform data\n", __func__); + return; + } + + npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + + s3c_device_hwmon.dev.platform_data = npd; +} diff --git a/arch/arm/plat-samsung/include/plat/hwmon.h b/arch/arm/plat-samsung/include/plat/hwmon.h index 1ba88ea0aa3..c167e4429bc 100644 --- a/arch/arm/plat-samsung/include/plat/hwmon.h +++ b/arch/arm/plat-samsung/include/plat/hwmon.h @@ -37,5 +37,15 @@ struct s3c_hwmon_pdata { struct s3c_hwmon_chcfg *in[8]; }; +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + #endif /* __ASM_ARCH_ADC_HWMON_H */ -- cgit v1.2.3-70-g09d2 From 14894b9b8317d9a337bba55998fdef1c9b2dc63d Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Mon, 17 May 2010 10:35:29 +0900 Subject: S3C: DMA: Change argument of s3c2410_dma_devconfig All other functions have the channel argument of type 'unsigned int' the s3c2410_dma_devconfig also accept the same value as argument but treat it as type 'int'. Remove this anomaly by make it 'unsigned int'. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/dma.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-samsung/include/plat/dma.h | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 33ccf7bf766..5567e037b0d 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -414,7 +414,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(int channel, +int s3c2410_dma_devconfig(unsigned int channel, enum s3c2410_dmasrc source, unsigned long devaddr) { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 93827b3d4e8..6ad274e7593 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1104,7 +1104,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(int channel, +int s3c2410_dma_devconfig(unsigned int channel, enum s3c2410_dmasrc source, unsigned long devaddr) { diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 7584d751ed5..2e8f8c6560d 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -110,8 +110,8 @@ extern int s3c2410_dma_config(unsigned int channel, int xferunit); * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, - unsigned long devaddr); +extern int s3c2410_dma_devconfig(unsigned int channel, + enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition * -- cgit v1.2.3-70-g09d2 From d800edebe33cac300ab1ff3b95e8a74d53e842d2 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Tue, 18 May 2010 11:59:06 +0900 Subject: S3C: DMA: Add api driver for PL330 Latest Samsung SoCs have one or more PL330 as their DMACs. This patch implements the S3C DMA API for PL330 core driver. The design has been kept as generic as possible while keeping effort to add support for new SoCs to the minimum possible level. Some of the salient features of this driver are:- o Automatic scheduling of client requests onto DMAC if more than one DMAC can reach the peripheral. Factors, such as current load and number of exclusive but inactive peripherals that are supported by the DMAC, are used to decide suitability of a DMAC for a particular client. o CIRCULAR buffer option is supported. o The driver scales transparently with the number of DMACs and total peripherals in the platform, since all peripherals are added to the peripheral pool and DMACs to the controller pool. For most conservative use of memory, smallest driver size and best performance, we don't employ legacy data structures of the S3C DMA API. That should not have any affect since those data structures are completely invisible to the DMA clients. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/Kconfig | 6 + arch/arm/plat-samsung/Makefile | 2 + arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h | 78 ++ .../plat-samsung/include/plat/s3c-pl330-pdata.h | 32 + arch/arm/plat-samsung/s3c-pl330.c | 1224 ++++++++++++++++++++ 5 files changed, 1342 insertions(+) create mode 100644 arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h create mode 100644 arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h create mode 100644 arch/arm/plat-samsung/s3c-pl330.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index d552c65fa1b..78b8b89b462 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -198,6 +198,12 @@ config S3C_DMA help Internal configuration for S3C DMA core +config S3C_PL330_DMA + bool + select PL330 + help + S3C DMA API Driver for PL330 DMAC. + comment "Power management" config SAMSUNG_PM_DEBUG diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 22c89d08f6e..05718a36d74 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -45,6 +45,8 @@ obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o obj-$(CONFIG_S3C_DMA) += dma.o +obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o + # PM support obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h new file mode 100644 index 00000000000..5fe6721b57f --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __S3C_DMA_PL330_H_ +#define __S3C_DMA_PL330_H_ + +#define S3C2410_DMAF_AUTOSTART (1 << 0) +#define S3C2410_DMAF_CIRCULAR (1 << 1) + +/* + * PL330 can assign any channel to communicate with + * any of the peripherals attched to the DMAC. + * For the sake of consistency across client drivers, + * We keep the channel names unchanged and only add + * missing peripherals are added. + * Order is not important since S3C PL330 API driver + * use these just as IDs. + */ +enum dma_ch { + DMACH_UART0_RX, + DMACH_UART0_TX, + DMACH_UART1_RX, + DMACH_UART1_TX, + DMACH_UART2_RX, + DMACH_UART2_TX, + DMACH_UART3_RX, + DMACH_UART3_TX, + DMACH_IRDA, + DMACH_I2S0_RX, + DMACH_I2S0_TX, + DMACH_I2S0S_TX, + DMACH_I2S1_RX, + DMACH_I2S1_TX, + DMACH_I2S2_RX, + DMACH_I2S2_TX, + DMACH_SPI0_RX, + DMACH_SPI0_TX, + DMACH_SPI1_RX, + DMACH_SPI1_TX, + DMACH_SPI2_RX, + DMACH_SPI2_TX, + DMACH_AC97_MICIN, + DMACH_AC97_PCMIN, + DMACH_AC97_PCMOUT, + DMACH_EXTERNAL, + DMACH_PWM, + DMACH_SPDIF, + DMACH_HSI_RX, + DMACH_HSI_TX, + DMACH_PCM0_TX, + DMACH_PCM0_RX, + DMACH_PCM1_TX, + DMACH_PCM1_RX, + DMACH_PCM2_TX, + DMACH_PCM2_RX, + DMACH_MSM_REQ3, + DMACH_MSM_REQ2, + DMACH_MSM_REQ1, + DMACH_MSM_REQ0, + /* END Marker, also used to denote a reserved channel */ + DMACH_MAX, +}; + +static inline bool s3c_dma_has_circular(void) +{ + return true; +} + +#include + +#endif /* __S3C_DMA_PL330_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h new file mode 100644 index 00000000000..bf5e2a9d408 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h @@ -0,0 +1,32 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __S3C_PL330_PDATA_H +#define __S3C_PL330_PDATA_H + +#include + +/* + * Every PL330 DMAC has max 32 peripheral interfaces, + * of which some may be not be really used in your + * DMAC's configuration. + * Populate this array of 32 peri i/fs with relevant + * channel IDs for used peri i/f and DMACH_MAX for + * those unused. + * + * The platforms just need to provide this info + * to the S3C DMA API driver for PL330. + */ +struct s3c_pl330_platdata { + enum dma_ch peri[32]; +}; + +#endif /* __S3C_PL330_PDATA_H */ diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c new file mode 100644 index 00000000000..a91305a60ae --- /dev/null +++ b/arch/arm/plat-samsung/s3c-pl330.c @@ -0,0 +1,1224 @@ +/* linux/arch/arm/plat-samsung/s3c-pl330.c + * + * Copyright (C) 2010 Samsung Electronics Co. Ltd. + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include + +/** + * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC. + * @busy_chan: Number of channels currently busy. + * @peri: List of IDs of peripherals this DMAC can work with. + * @node: To attach to the global list of DMACs. + * @pi: PL330 configuration info for the DMAC. + * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. + */ +struct s3c_pl330_dmac { + unsigned busy_chan; + enum dma_ch *peri; + struct list_head node; + struct pl330_info *pi; + struct kmem_cache *kmcache; +}; + +/** + * struct s3c_pl330_xfer - A request submitted by S3C DMA clients. + * @token: Xfer ID provided by the client. + * @node: To attach to the list of xfers on a channel. + * @px: Xfer for PL330 core. + * @chan: Owner channel of this xfer. + */ +struct s3c_pl330_xfer { + void *token; + struct list_head node; + struct pl330_xfer px; + struct s3c_pl330_chan *chan; +}; + +/** + * struct s3c_pl330_chan - Logical channel to communicate with + * a Physical peripheral. + * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC. + * NULL if the channel is available to be acquired. + * @id: ID of the peripheral that this channel can communicate with. + * @options: Options specified by the client. + * @sdaddr: Address provided via s3c2410_dma_devconfig. + * @node: To attach to the global list of channels. + * @lrq: Pointer to the last submitted pl330_req to PL330 core. + * @xfer_list: To manage list of xfers enqueued. + * @req: Two requests to communicate with the PL330 engine. + * @callback_fn: Callback function to the client. + * @rqcfg: Channel configuration for the xfers. + * @xfer_head: Pointer to the xfer to be next excecuted. + * @dmac: Pointer to the DMAC that manages this channel, NULL if the + * channel is available to be acquired. + * @client: Client of this channel. NULL if the + * channel is available to be acquired. + */ +struct s3c_pl330_chan { + void *pl330_chan_id; + enum dma_ch id; + unsigned int options; + unsigned long sdaddr; + struct list_head node; + struct pl330_req *lrq; + struct list_head xfer_list; + struct pl330_req req[2]; + s3c2410_dma_cbfn_t callback_fn; + struct pl330_reqcfg rqcfg; + struct s3c_pl330_xfer *xfer_head; + struct s3c_pl330_dmac *dmac; + struct s3c2410_dma_client *client; +}; + +/* All DMACs in the platform */ +static LIST_HEAD(dmac_list); + +/* All channels to peripherals in the platform */ +static LIST_HEAD(chan_list); + +/* + * Since we add resources(DMACs and Channels) to the global pool, + * we need to guard access to the resources using a global lock + */ +static DEFINE_SPINLOCK(res_lock); + +/* Returns the channel with ID 'id' in the chan_list */ +static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch; + + list_for_each_entry(ch, &chan_list, node) + if (ch->id == id) + return ch; + + return NULL; +} + +/* Allocate a new channel with ID 'id' and add to chan_list */ +static void chan_add(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + + /* Return if the channel already exists */ + if (ch) + return; + + ch = kmalloc(sizeof(*ch), GFP_KERNEL); + /* Return silently to work with other channels */ + if (!ch) + return; + + ch->id = id; + ch->dmac = NULL; + + list_add_tail(&ch->node, &chan_list); +} + +/* If the channel is not yet acquired by any client */ +static bool chan_free(struct s3c_pl330_chan *ch) +{ + if (!ch) + return false; + + /* Channel points to some DMAC only when it's acquired */ + return ch->dmac ? false : true; +} + +/* + * Returns 0 is peripheral i/f is invalid or not present on the dmac. + * Index + 1, otherwise. + */ +static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id) +{ + enum dma_ch *id = dmac->peri; + int i; + + /* Discount invalid markers */ + if (ch_id == DMACH_MAX) + return 0; + + for (i = 0; i < PL330_MAX_PERI; i++) + if (id[i] == ch_id) + return i + 1; + + return 0; +} + +/* If all channel threads of the DMAC are busy */ +static inline bool dmac_busy(struct s3c_pl330_dmac *dmac) +{ + struct pl330_info *pi = dmac->pi; + + return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true; +} + +/* + * Returns the number of free channels that + * can be handled by this dmac only. + */ +static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac) +{ + enum dma_ch *id = dmac->peri; + struct s3c_pl330_dmac *d; + struct s3c_pl330_chan *ch; + unsigned found, count = 0; + enum dma_ch p; + int i; + + for (i = 0; i < PL330_MAX_PERI; i++) { + p = id[i]; + ch = id_to_chan(p); + + if (p == DMACH_MAX || !chan_free(ch)) + continue; + + found = 0; + list_for_each_entry(d, &dmac_list, node) { + if (d != dmac && iface_of_dmac(d, ch->id)) { + found = 1; + break; + } + } + if (!found) + count++; + } + + return count; +} + +/* + * Measure of suitability of 'dmac' handling 'ch' + * + * 0 indicates 'dmac' can not handle 'ch' either + * because it is not supported by the hardware or + * because all dmac channels are currently busy. + * + * >0 vlaue indicates 'dmac' has the capability. + * The bigger the value the more suitable the dmac. + */ +#define MAX_SUIT UINT_MAX +#define MIN_SUIT 0 + +static unsigned suitablility(struct s3c_pl330_dmac *dmac, + struct s3c_pl330_chan *ch) +{ + struct pl330_info *pi = dmac->pi; + enum dma_ch *id = dmac->peri; + struct s3c_pl330_dmac *d; + unsigned s; + int i; + + s = MIN_SUIT; + /* If all the DMAC channel threads are busy */ + if (dmac_busy(dmac)) + return s; + + for (i = 0; i < PL330_MAX_PERI; i++) + if (id[i] == ch->id) + break; + + /* If the 'dmac' can't talk to 'ch' */ + if (i == PL330_MAX_PERI) + return s; + + s = MAX_SUIT; + list_for_each_entry(d, &dmac_list, node) { + /* + * If some other dmac can talk to this + * peri and has some channel free. + */ + if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) { + s = 0; + break; + } + } + if (s) + return s; + + s = 100; + + /* Good if free chans are more, bad otherwise */ + s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac); + + return s; +} + +/* More than one DMAC may have capability to transfer data with the + * peripheral. This function assigns most suitable DMAC to manage the + * channel and hence communicate with the peripheral. + */ +static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch) +{ + struct s3c_pl330_dmac *d, *dmac = NULL; + unsigned sn, sl = MIN_SUIT; + + list_for_each_entry(d, &dmac_list, node) { + sn = suitablility(d, ch); + + if (sn == MAX_SUIT) + return d; + + if (sn > sl) + dmac = d; + } + + return dmac; +} + +/* Acquire the channel for peripheral 'id' */ +static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + struct s3c_pl330_dmac *dmac; + + /* If the channel doesn't exist or is already acquired */ + if (!ch || !chan_free(ch)) { + ch = NULL; + goto acq_exit; + } + + dmac = map_chan_to_dmac(ch); + /* If couldn't map */ + if (!dmac) { + ch = NULL; + goto acq_exit; + } + + dmac->busy_chan++; + ch->dmac = dmac; + +acq_exit: + return ch; +} + +/* Delete xfer from the queue */ +static inline void del_from_queue(struct s3c_pl330_xfer *xfer) +{ + struct s3c_pl330_xfer *t; + struct s3c_pl330_chan *ch; + int found; + + if (!xfer) + return; + + ch = xfer->chan; + + /* Make sure xfer is in the queue */ + found = 0; + list_for_each_entry(t, &ch->xfer_list, node) + if (t == xfer) { + found = 1; + break; + } + + if (!found) + return; + + /* If xfer is last entry in the queue */ + if (xfer->node.next == &ch->xfer_list) + t = list_entry(ch->xfer_list.next, + struct s3c_pl330_xfer, node); + else + t = list_entry(xfer->node.next, + struct s3c_pl330_xfer, node); + + /* If there was only one node left */ + if (t == xfer) + ch->xfer_head = NULL; + else if (ch->xfer_head == xfer) + ch->xfer_head = t; + + list_del(&xfer->node); +} + +/* Provides pointer to the next xfer in the queue. + * If CIRCULAR option is set, the list is left intact, + * otherwise the xfer is removed from the list. + * Forced delete 'pluck' can be set to override the CIRCULAR option. + */ +static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch, + int pluck) +{ + struct s3c_pl330_xfer *xfer = ch->xfer_head; + + if (!xfer) + return NULL; + + /* If xfer is last entry in the queue */ + if (xfer->node.next == &ch->xfer_list) + ch->xfer_head = list_entry(ch->xfer_list.next, + struct s3c_pl330_xfer, node); + else + ch->xfer_head = list_entry(xfer->node.next, + struct s3c_pl330_xfer, node); + + if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR)) + del_from_queue(xfer); + + return xfer; +} + +static inline void add_to_queue(struct s3c_pl330_chan *ch, + struct s3c_pl330_xfer *xfer, int front) +{ + struct pl330_xfer *xt; + + /* If queue empty */ + if (ch->xfer_head == NULL) + ch->xfer_head = xfer; + + xt = &ch->xfer_head->px; + /* If the head already submitted (CIRCULAR head) */ + if (ch->options & S3C2410_DMAF_CIRCULAR && + (xt == ch->req[0].x || xt == ch->req[1].x)) + ch->xfer_head = xfer; + + /* If this is a resubmission, it should go at the head */ + if (front) { + ch->xfer_head = xfer; + list_add(&xfer->node, &ch->xfer_list); + } else { + list_add_tail(&xfer->node, &ch->xfer_list); + } +} + +static inline void _finish_off(struct s3c_pl330_xfer *xfer, + enum s3c2410_dma_buffresult res, int ffree) +{ + struct s3c_pl330_chan *ch; + + if (!xfer) + return; + + ch = xfer->chan; + + /* Do callback */ + if (ch->callback_fn) + ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res); + + /* Force Free or if buffer is not needed anymore */ + if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR)) + kmem_cache_free(ch->dmac->kmcache, xfer); +} + +static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch, + struct pl330_req *r) +{ + struct s3c_pl330_xfer *xfer; + int ret = 0; + + /* If already submitted */ + if (r->x) + return 0; + + xfer = get_from_queue(ch, 0); + if (xfer) { + r->x = &xfer->px; + + /* Use max bandwidth for M<->M xfers */ + if (r->rqtype == MEMTOMEM) { + struct pl330_info *pi = xfer->chan->dmac->pi; + int burst = 1 << ch->rqcfg.brst_size; + u32 bytes = r->x->bytes; + int bl; + + bl = pi->pcfg.data_bus_width / 8; + bl *= pi->pcfg.data_buf_dep; + bl /= burst; + + /* src/dst_burst_len can't be more than 16 */ + if (bl > 16) + bl = 16; + + while (bl > 1) { + if (!(bytes % (bl * burst))) + break; + bl--; + } + + ch->rqcfg.brst_len = bl; + } else { + ch->rqcfg.brst_len = 1; + } + + ret = pl330_submit_req(ch->pl330_chan_id, r); + + /* If submission was successful */ + if (!ret) { + ch->lrq = r; /* latest submitted req */ + return 0; + } + + r->x = NULL; + + /* If both of the PL330 ping-pong buffers filled */ + if (ret == -EAGAIN) { + dev_err(ch->dmac->pi->dev, "%s:%d!\n", + __func__, __LINE__); + /* Queue back again */ + add_to_queue(ch, xfer, 1); + ret = 0; + } else { + dev_err(ch->dmac->pi->dev, "%s:%d!\n", + __func__, __LINE__); + _finish_off(xfer, S3C2410_RES_ERR, 0); + } + } + + return ret; +} + +static void s3c_pl330_rq(struct s3c_pl330_chan *ch, + struct pl330_req *r, enum pl330_op_err err) +{ + unsigned long flags; + struct s3c_pl330_xfer *xfer; + struct pl330_xfer *xl = r->x; + enum s3c2410_dma_buffresult res; + + spin_lock_irqsave(&res_lock, flags); + + r->x = NULL; + + s3c_pl330_submit(ch, r); + + spin_unlock_irqrestore(&res_lock, flags); + + /* Map result to S3C DMA API */ + if (err == PL330_ERR_NONE) + res = S3C2410_RES_OK; + else if (err == PL330_ERR_ABORT) + res = S3C2410_RES_ABORT; + else + res = S3C2410_RES_ERR; + + /* If last request had some xfer */ + if (xl) { + xfer = container_of(xl, struct s3c_pl330_xfer, px); + _finish_off(xfer, res, 0); + } else { + dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n", + __func__, __LINE__); + } +} + +static void s3c_pl330_rq0(void *token, enum pl330_op_err err) +{ + struct pl330_req *r = token; + struct s3c_pl330_chan *ch = container_of(r, + struct s3c_pl330_chan, req[0]); + s3c_pl330_rq(ch, r, err); +} + +static void s3c_pl330_rq1(void *token, enum pl330_op_err err) +{ + struct pl330_req *r = token; + struct s3c_pl330_chan *ch = container_of(r, + struct s3c_pl330_chan, req[1]); + s3c_pl330_rq(ch, r, err); +} + +/* Release an acquired channel */ +static void chan_release(struct s3c_pl330_chan *ch) +{ + struct s3c_pl330_dmac *dmac; + + if (chan_free(ch)) + return; + + dmac = ch->dmac; + ch->dmac = NULL; + dmac->busy_chan--; +} + +int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op) +{ + struct s3c_pl330_xfer *xfer; + enum pl330_chan_op pl330op; + struct s3c_pl330_chan *ch; + unsigned long flags; + int idx, ret; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto ctrl_exit; + } + + switch (op) { + case S3C2410_DMAOP_START: + /* Make sure both reqs are enqueued */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + s3c_pl330_submit(ch, &ch->req[idx]); + s3c_pl330_submit(ch, &ch->req[1 - idx]); + pl330op = PL330_OP_START; + break; + + case S3C2410_DMAOP_STOP: + pl330op = PL330_OP_ABORT; + break; + + case S3C2410_DMAOP_FLUSH: + pl330op = PL330_OP_FLUSH; + break; + + case S3C2410_DMAOP_PAUSE: + case S3C2410_DMAOP_RESUME: + case S3C2410_DMAOP_TIMEOUT: + case S3C2410_DMAOP_STARTED: + spin_unlock_irqrestore(&res_lock, flags); + return 0; + + default: + spin_unlock_irqrestore(&res_lock, flags); + return -EINVAL; + } + + ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op); + + if (pl330op == PL330_OP_START) { + spin_unlock_irqrestore(&res_lock, flags); + return ret; + } + + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + /* Abort the current xfer */ + if (ch->req[idx].x) { + xfer = container_of(ch->req[idx].x, + struct s3c_pl330_xfer, px); + + /* Drop xfer during FLUSH */ + if (pl330op == PL330_OP_FLUSH) + del_from_queue(xfer); + + ch->req[idx].x = NULL; + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, + pl330op == PL330_OP_FLUSH ? 1 : 0); + spin_lock_irqsave(&res_lock, flags); + } + + /* Flush the whole queue */ + if (pl330op == PL330_OP_FLUSH) { + + if (ch->req[1 - idx].x) { + xfer = container_of(ch->req[1 - idx].x, + struct s3c_pl330_xfer, px); + + del_from_queue(xfer); + + ch->req[1 - idx].x = NULL; + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + /* Finish off the remaining in the queue */ + xfer = ch->xfer_head; + while (xfer) { + + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + + xfer = ch->xfer_head; + } + } + +ctrl_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_ctrl); + +int s3c2410_dma_enqueue(enum dma_ch id, void *token, + dma_addr_t addr, int size) +{ + struct s3c_pl330_chan *ch; + struct s3c_pl330_xfer *xfer; + unsigned long flags; + int idx, ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + /* Error if invalid or free channel */ + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto enq_exit; + } + + /* Error if size is unaligned */ + if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) { + ret = -EINVAL; + goto enq_exit; + } + + xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC); + if (!xfer) { + ret = -ENOMEM; + goto enq_exit; + } + + xfer->token = token; + xfer->chan = ch; + xfer->px.bytes = size; + xfer->px.next = NULL; /* Single request */ + + /* For S3C DMA API, direction is always fixed for all xfers */ + if (ch->req[0].rqtype == MEMTODEV) { + xfer->px.src_addr = addr; + xfer->px.dst_addr = ch->sdaddr; + } else { + xfer->px.src_addr = ch->sdaddr; + xfer->px.dst_addr = addr; + } + + add_to_queue(ch, xfer, 0); + + /* Try submitting on either request */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + if (!ch->req[idx].x) + s3c_pl330_submit(ch, &ch->req[idx]); + else + s3c_pl330_submit(ch, &ch->req[1 - idx]); + + spin_unlock_irqrestore(&res_lock, flags); + + if (ch->options & S3C2410_DMAF_AUTOSTART) + s3c2410_dma_ctrl(id, S3C2410_DMAOP_START); + + return 0; + +enq_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_enqueue); + +int s3c2410_dma_request(enum dma_ch id, + struct s3c2410_dma_client *client, + void *dev) +{ + struct s3c_pl330_dmac *dmac; + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = chan_acquire(id); + if (!ch) { + ret = -EBUSY; + goto req_exit; + } + + dmac = ch->dmac; + + ch->pl330_chan_id = pl330_request_channel(dmac->pi); + if (!ch->pl330_chan_id) { + chan_release(ch); + ret = -EBUSY; + goto req_exit; + } + + ch->client = client; + ch->options = 0; /* Clear any option */ + ch->callback_fn = NULL; /* Clear any callback */ + ch->lrq = NULL; + + ch->rqcfg.brst_size = 2; /* Default word size */ + ch->rqcfg.swap = SWAP_NO; + ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */ + ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */ + ch->rqcfg.privileged = 0; + ch->rqcfg.insnaccess = 0; + + /* Set invalid direction */ + ch->req[0].rqtype = DEVTODEV; + ch->req[1].rqtype = ch->req[0].rqtype; + + ch->req[0].cfg = &ch->rqcfg; + ch->req[1].cfg = ch->req[0].cfg; + + ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */ + ch->req[1].peri = ch->req[0].peri; + + ch->req[0].token = &ch->req[0]; + ch->req[0].xfer_cb = s3c_pl330_rq0; + ch->req[1].token = &ch->req[1]; + ch->req[1].xfer_cb = s3c_pl330_rq1; + + ch->req[0].x = NULL; + ch->req[1].x = NULL; + + /* Reset xfer list */ + INIT_LIST_HEAD(&ch->xfer_list); + ch->xfer_head = NULL; + +req_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_request); + +int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client) +{ + struct s3c_pl330_chan *ch; + struct s3c_pl330_xfer *xfer; + unsigned long flags; + int ret = 0; + unsigned idx; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) + goto free_exit; + + /* Refuse if someone else wanted to free the channel */ + if (ch->client != client) { + ret = -EBUSY; + goto free_exit; + } + + /* Stop any active xfer, Flushe the queue and do callbacks */ + pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH); + + /* Abort the submitted requests */ + idx = (ch->lrq == &ch->req[0]) ? 1 : 0; + + if (ch->req[idx].x) { + xfer = container_of(ch->req[idx].x, + struct s3c_pl330_xfer, px); + + ch->req[idx].x = NULL; + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + if (ch->req[1 - idx].x) { + xfer = container_of(ch->req[1 - idx].x, + struct s3c_pl330_xfer, px); + + ch->req[1 - idx].x = NULL; + del_from_queue(xfer); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } + + /* Pluck and Abort the queued requests in order */ + do { + xfer = get_from_queue(ch, 1); + + spin_unlock_irqrestore(&res_lock, flags); + _finish_off(xfer, S3C2410_RES_ABORT, 1); + spin_lock_irqsave(&res_lock, flags); + } while (xfer); + + ch->client = NULL; + + pl330_release_channel(ch->pl330_chan_id); + + ch->pl330_chan_id = NULL; + + chan_release(ch); + +free_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_free); + +int s3c2410_dma_config(enum dma_ch id, int xferunit) +{ + struct s3c_pl330_chan *ch; + struct pl330_info *pi; + unsigned long flags; + int i, dbwidth, ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto cfg_exit; + } + + pi = ch->dmac->pi; + dbwidth = pi->pcfg.data_bus_width / 8; + + /* Max size of xfer can be pcfg.data_bus_width */ + if (xferunit > dbwidth) { + ret = -EINVAL; + goto cfg_exit; + } + + i = 0; + while (xferunit != (1 << i)) + i++; + + /* If valid value */ + if (xferunit == (1 << i)) + ch->rqcfg.brst_size = i; + else + ret = -EINVAL; + +cfg_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_config); + +/* Options that are supported by this driver */ +#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART) + +int s3c2410_dma_setflags(enum dma_ch id, unsigned int options) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS)) + ret = -EINVAL; + else + ch->options = options; + + spin_unlock_irqrestore(&res_lock, flags); + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_setflags); + +int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) + ret = -EINVAL; + else + ch->callback_fn = rtn; + + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); + +int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source, + unsigned long address) +{ + struct s3c_pl330_chan *ch; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&res_lock, flags); + + ch = id_to_chan(id); + + if (!ch || chan_free(ch)) { + ret = -EINVAL; + goto devcfg_exit; + } + + switch (source) { + case S3C2410_DMASRC_HW: /* P->M */ + ch->req[0].rqtype = DEVTOMEM; + ch->req[1].rqtype = DEVTOMEM; + ch->rqcfg.src_inc = 0; + ch->rqcfg.dst_inc = 1; + break; + case S3C2410_DMASRC_MEM: /* M->P */ + ch->req[0].rqtype = MEMTODEV; + ch->req[1].rqtype = MEMTODEV; + ch->rqcfg.src_inc = 1; + ch->rqcfg.dst_inc = 0; + break; + default: + ret = -EINVAL; + goto devcfg_exit; + } + + ch->sdaddr = address; + +devcfg_exit: + spin_unlock_irqrestore(&res_lock, flags); + + return ret; +} +EXPORT_SYMBOL(s3c2410_dma_devconfig); + +int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst) +{ + struct s3c_pl330_chan *ch = id_to_chan(id); + struct pl330_chanstatus status; + int ret; + + if (!ch || chan_free(ch)) + return -EINVAL; + + ret = pl330_chan_status(ch->pl330_chan_id, &status); + if (ret < 0) + return ret; + + *src = status.src_addr; + *dst = status.dst_addr; + + return 0; +} +EXPORT_SYMBOL(s3c2410_dma_getposition); + +static irqreturn_t pl330_irq_handler(int irq, void *data) +{ + if (pl330_update(data)) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +static int pl330_probe(struct platform_device *pdev) +{ + struct s3c_pl330_dmac *s3c_pl330_dmac; + struct s3c_pl330_platdata *pl330pd; + struct pl330_info *pl330_info; + struct resource *res; + int i, ret, irq; + + pl330pd = pdev->dev.platform_data; + + /* Can't do without the list of _32_ peripherals */ + if (!pl330pd || !pl330pd->peri) { + dev_err(&pdev->dev, "platform data missing!\n"); + return -ENODEV; + } + + pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL); + if (!pl330_info) + return -ENOMEM; + + pl330_info->pl330_data = NULL; + pl330_info->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto probe_err1; + } + + request_mem_region(res->start, resource_size(res), pdev->name); + + pl330_info->base = ioremap(res->start, resource_size(res)); + if (!pl330_info->base) { + ret = -ENXIO; + goto probe_err2; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = irq; + goto probe_err3; + } + + ret = request_irq(irq, pl330_irq_handler, 0, + dev_name(&pdev->dev), pl330_info); + if (ret) + goto probe_err4; + + ret = pl330_add(pl330_info); + if (ret) + goto probe_err5; + + /* Allocate a new DMAC */ + s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); + if (!s3c_pl330_dmac) { + ret = -ENOMEM; + goto probe_err6; + } + + /* Hook the info */ + s3c_pl330_dmac->pi = pl330_info; + + /* No busy channels */ + s3c_pl330_dmac->busy_chan = 0; + + s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev), + sizeof(struct s3c_pl330_xfer), 0, 0, NULL); + + if (!s3c_pl330_dmac->kmcache) { + ret = -ENOMEM; + goto probe_err7; + } + + /* Get the list of peripherals */ + s3c_pl330_dmac->peri = pl330pd->peri; + + /* Attach to the list of DMACs */ + list_add_tail(&s3c_pl330_dmac->node, &dmac_list); + + /* Create a channel for each peripheral in the DMAC + * that is, if it doesn't already exist + */ + for (i = 0; i < PL330_MAX_PERI; i++) + if (s3c_pl330_dmac->peri[i] != DMACH_MAX) + chan_add(s3c_pl330_dmac->peri[i]); + + printk(KERN_INFO + "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name); + printk(KERN_INFO + "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", + pl330_info->pcfg.data_buf_dep, + pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan, + pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events); + + return 0; + +probe_err7: + kfree(s3c_pl330_dmac); +probe_err6: + pl330_del(pl330_info); +probe_err5: + free_irq(irq, pl330_info); +probe_err4: +probe_err3: + iounmap(pl330_info->base); +probe_err2: + release_mem_region(res->start, resource_size(res)); +probe_err1: + kfree(pl330_info); + + return ret; +} + +static int pl330_remove(struct platform_device *pdev) +{ + struct s3c_pl330_dmac *dmac, *d; + struct s3c_pl330_chan *ch; + unsigned long flags; + int del, found; + + if (!pdev->dev.platform_data) + return -EINVAL; + + spin_lock_irqsave(&res_lock, flags); + + found = 0; + list_for_each_entry(d, &dmac_list, node) + if (d->pi->dev == &pdev->dev) { + found = 1; + break; + } + + if (!found) { + spin_unlock_irqrestore(&res_lock, flags); + return 0; + } + + dmac = d; + + /* Remove all Channels that are managed only by this DMAC */ + list_for_each_entry(ch, &chan_list, node) { + + /* Only channels that are handled by this DMAC */ + if (iface_of_dmac(dmac, ch->id)) + del = 1; + else + continue; + + /* Don't remove if some other DMAC has it too */ + list_for_each_entry(d, &dmac_list, node) + if (d != dmac && iface_of_dmac(d, ch->id)) { + del = 0; + break; + } + + if (del) { + spin_unlock_irqrestore(&res_lock, flags); + s3c2410_dma_free(ch->id, ch->client); + spin_lock_irqsave(&res_lock, flags); + list_del(&ch->node); + kfree(ch); + } + } + + /* Remove the DMAC */ + list_del(&dmac->node); + kfree(dmac); + + spin_unlock_irqrestore(&res_lock, flags); + + return 0; +} + +static struct platform_driver pl330_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "s3c-pl330", + }, + .probe = pl330_probe, + .remove = pl330_remove, +}; + +static int __init pl330_init(void) +{ + return platform_driver_register(&pl330_driver); +} +module_init(pl330_init); + +static void __exit pl330_exit(void) +{ + platform_driver_unregister(&pl330_driver); + return; +} +module_exit(pl330_exit); + +MODULE_AUTHOR("Jaswinder Singh "); +MODULE_DESCRIPTION("Driver for PL330 DMA Controller"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 05e021f095ffe9c7c1a695a3e2835f39243c6270 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Mon, 17 May 2010 20:17:42 +0200 Subject: ARM: S3C64XX: Add USB external clock definition This adds the xusbxti clock to S3C64XX platform. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/clock.c | 7 +++++++ arch/arm/plat-samsung/include/plat/clock.h | 1 + 2 files changed, 8 insertions(+) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index da835958901..7a4138beb66 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -88,6 +88,12 @@ struct clk clk_48m = { .enable = clk_48m_ctrl, }; +struct clk clk_xusbxti = { + .name = "xusbxti", + .id = -1, + .rate = 48000000, +}; + static int inline s3c64xx_gate(void __iomem *reg, struct clk *clk, int enable) @@ -791,6 +797,7 @@ static struct clk *clks[] __initdata = { &clk_27m, &clk_48m, &clk_h2, + &clk_xusbxti, }; /** diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 60b62692ac7..efbc984640c 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -74,6 +74,7 @@ extern struct clk clk_ext; extern struct clk clk_h2; extern struct clk clk_27m; extern struct clk clk_48m; +extern struct clk clk_xusbxti; extern int clk_default_setrate(struct clk *clk, unsigned long rate); extern struct clk_ops clk_ops_def_setrate; -- cgit v1.2.3-70-g09d2 From f077f3fc055b329787783a1ab0efb9a8f8ecc874 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 13 May 2010 14:44:50 +0900 Subject: ARM: SAMSUNG: Set S3C_FB_MAX_WIN in Move the S3C_FB_MAX_WIN to the platform data to avoid having to include the registers with the platform data. Set S3C_FB_MAX_WIN to 5, which is the maximum that any of the current hardware can do and the cost of having it set to this for all is minimal (at least for the platform data case), then always leave this as the maximum for the systems supported. Also remove the inclusion of from the device definition in arch/arm/plat-samsung Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/dev-fb.c | 1 - arch/arm/plat-samsung/include/plat/fb.h | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index 002a15f313f..bf60204c629 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index ffc01a76b7c..1f85649d8c1 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,6 +15,13 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + /** * struct s3c_fb_pd_win - per window setup data * @win_mode: The display parameters to initialise (not for window 0) -- cgit v1.2.3-70-g09d2 From 602bf0cfbdedfd988e43203d2a26bdbbab639309 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Tue, 18 May 2010 16:02:26 +0900 Subject: ARM: S5PV210: Add audio platform devices Define platform devices for all audio devices found on S5PV210 Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/mach-s5pv210/Makefile | 4 + arch/arm/mach-s5pv210/dev-audio.c | 327 ++++++++++++++++++++++++++++++ arch/arm/mach-s5pv210/include/mach/map.h | 13 ++ arch/arm/plat-samsung/include/plat/devs.h | 8 + 4 files changed, 352 insertions(+) create mode 100644 arch/arm/mach-s5pv210/dev-audio.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 8ebf51c52a0..e435afe7cff 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -18,3 +18,7 @@ obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o + +# device support + +obj-y += dev-audio.o diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c new file mode 100644 index 00000000000..6e215330a1b --- /dev/null +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -0,0 +1,327 @@ +/* linux/arch/arm/mach-s5pv210/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include +#include +#include +#include + +static int s5pv210_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 1: + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2)); + break; + + case 2: + s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4)); + break; + + case -1: + s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5pv210_cfg_i2s, +}; + +static struct resource s5pv210_iis0_resource[] = { + [0] = { + .start = S5PV210_PA_IIS0, + .end = S5PV210_PA_IIS0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_iis0_resource), + .resource = s5pv210_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pv210_iis1_resource[] = { + [0] = { + .start = S5PV210_PA_IIS1, + .end = S5PV210_PA_IIS1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_iis1_resource), + .resource = s5pv210_iis1_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5pv210_iis2_resource[] = { + [0] = { + .start = S5PV210_PA_IIS2, + .end = S5PV210_PA_IIS2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S2_TX, + .end = DMACH_I2S2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S2_RX, + .end = DMACH_I2S2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_iis2 = { + .name = "s3c64xx-iis", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv210_iis2_resource), + .resource = s5pv210_iis2_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3)); + break; + case 1: + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3)); + break; + case 2: + s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2)); + break; + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5pv210_pcm_cfg_gpio, +}; + +static struct resource s5pv210_pcm0_resource[] = { + [0] = { + .start = S5PV210_PA_PCM0, + .end = S5PV210_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource), + .resource = s5pv210_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv210_pcm1_resource[] = { + [0] = { + .start = S5PV210_PA_PCM1, + .end = S5PV210_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource), + .resource = s5pv210_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5pv210_pcm2_resource[] = { + [0] = { + .start = S5PV210_PA_PCM2, + .end = S5PV210_PA_PCM2 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM2_TX, + .end = DMACH_PCM2_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM2_RX, + .end = DMACH_PCM2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5pv210_device_pcm2 = { + .name = "samsung-pcm", + .id = 2, + .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource), + .resource = s5pv210_pcm2_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +/* AC97 Controller platform devices */ + +static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev) +{ + s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4)); + + return 0; +} + +static struct resource s5pv210_ac97_resource[] = { + [0] = { + .start = S5PV210_PA_AC97, + .end = S5PV210_PA_AC97 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_AC97_PCMOUT, + .end = DMACH_AC97_PCMOUT, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_AC97_PCMIN, + .end = DMACH_AC97_PCMIN, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DMACH_AC97_MICIN, + .end = DMACH_AC97_MICIN, + .flags = IORESOURCE_DMA, + }, + [4] = { + .start = IRQ_AC97, + .end = IRQ_AC97, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct s3c_audio_pdata s3c_ac97_pdata = { + .cfg_gpio = s5pv210_ac97_cfg_gpio, +}; + +static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5pv210_device_ac97 = { + .name = "s3c-ac97", + .id = -1, + .num_resources = ARRAY_SIZE(s5pv210_ac97_resource), + .resource = s5pv210_ac97_resource, + .dev = { + .platform_data = &s3c_ac97_pdata, + .dma_mask = &s5pv210_ac97_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index c22694c8231..bcd2e82c2e2 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -58,6 +58,19 @@ #define S5PV210_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5PV210_PA_SDRAM +/* I2S */ +#define S5PV210_PA_IIS0 0xEEE30000 +#define S5PV210_PA_IIS1 0xE2100000 +#define S5PV210_PA_IIS2 0xE2A00000 + +/* PCM */ +#define S5PV210_PA_PCM0 0xE2300000 +#define S5PV210_PA_PCM1 0xE1200000 +#define S5PV210_PA_PCM2 0xE2B00000 + +/* AC97 */ +#define S5PV210_PA_AC97 0xE2200000 + /* compatibiltiy defines. */ #define S3C_PA_UART S5PV210_PA_UART #define S3C_PA_IIC S5PV210_PA_IIC0 diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 796d2425831..d8fda3a6db6 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -64,6 +64,14 @@ extern struct platform_device s3c_device_nand; extern struct platform_device s3c_device_usbgadget; extern struct platform_device s3c_device_usb_hsotg; +extern struct platform_device s5pv210_device_ac97; +extern struct platform_device s5pv210_device_pcm0; +extern struct platform_device s5pv210_device_pcm1; +extern struct platform_device s5pv210_device_pcm2; +extern struct platform_device s5pv210_device_iis0; +extern struct platform_device s5pv210_device_iis1; +extern struct platform_device s5pv210_device_iis2; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 -- cgit v1.2.3-70-g09d2 From 070c808546f69bc37db14db96e043a3b8894e0e2 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Tue, 18 May 2010 16:02:50 +0900 Subject: ARM: S5P6442: Add audio platform devices Define platform devices for all audio devices found on S5P6442 Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/mach-s5p6442/Makefile | 3 + arch/arm/mach-s5p6442/dev-audio.c | 197 ++++++++++++++++++++++++++++++ arch/arm/mach-s5p6442/include/mach/map.h | 8 ++ arch/arm/plat-samsung/include/plat/devs.h | 5 + 4 files changed, 213 insertions(+) create mode 100644 arch/arm/mach-s5p6442/dev-audio.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile index dde39a6ce6b..a43d5da5c58 100644 --- a/arch/arm/mach-s5p6442/Makefile +++ b/arch/arm/mach-s5p6442/Makefile @@ -17,3 +17,6 @@ obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o # machine support obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o + +# device support +obj-y += dev-audio.o diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c new file mode 100644 index 00000000000..cb801e1f5e2 --- /dev/null +++ b/arch/arm/mach-s5p6442/dev-audio.c @@ -0,0 +1,197 @@ +/* linux/arch/arm/mach-s5p6442/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include +#include +#include +#include + +static int s5p6442_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case 1: + s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2)); + break; + + case -1: + s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5p6442_cfg_i2s, +}; + +static struct resource s5p6442_iis0_resource[] = { + [0] = { + .start = S5P6442_PA_I2S0, + .end = S5P6442_PA_I2S0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6442_device_iis0 = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), + .resource = s5p6442_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +static struct resource s5p6442_iis1_resource[] = { + [0] = { + .start = S5P6442_PA_I2S1, + .end = S5P6442_PA_I2S1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S1_TX, + .end = DMACH_I2S1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S1_RX, + .end = DMACH_I2S1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6442_device_iis1 = { + .name = "s3c64xx-iis", + .id = 1, + .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), + .resource = s5p6442_iis1_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3)); + break; + + case 1: + s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5p6442_pcm_cfg_gpio, +}; + +static struct resource s5p6442_pcm0_resource[] = { + [0] = { + .start = S5P6442_PA_PCM0, + .end = S5P6442_PA_PCM0 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6442_device_pcm0 = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), + .resource = s5p6442_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; + +static struct resource s5p6442_pcm1_resource[] = { + [0] = { + .start = S5P6442_PA_PCM1, + .end = S5P6442_PA_PCM1 + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM1_TX, + .end = DMACH_PCM1_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM1_RX, + .end = DMACH_PCM1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6442_device_pcm1 = { + .name = "samsung-pcm", + .id = 1, + .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), + .resource = s5p6442_pcm1_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h index 685277d792f..767c596143c 100644 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ b/arch/arm/mach-s5p6442/include/mach/map.h @@ -51,6 +51,14 @@ #define S5P6442_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5P6442_PA_SDRAM +/* I2S */ +#define S5P6442_PA_I2S0 0xC0B00000 +#define S5P6442_PA_I2S1 0xF2200000 + +/* PCM */ +#define S5P6442_PA_PCM0 0xF2400000 +#define S5P6442_PA_PCM1 0xF2500000 + /* compatibiltiy defines. */ #define S3C_PA_UART S5P6442_PA_UART #define S3C_PA_IIC S5P6442_PA_IIC0 diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index d8fda3a6db6..ebf0387fb20 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -72,6 +72,11 @@ extern struct platform_device s5pv210_device_iis0; extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; +extern struct platform_device s5p6442_device_pcm0; +extern struct platform_device s5p6442_device_pcm1; +extern struct platform_device s5p6442_device_iis0; +extern struct platform_device s5p6442_device_iis1; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 -- cgit v1.2.3-70-g09d2 From 08885d0a4c4fa929c386e17c9682bf0d524146b9 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Tue, 18 May 2010 16:03:02 +0900 Subject: ARM: S5P6440: Add audio platform devices Define platform devices for all audio devices found on S5P6440 Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/mach-s5p6440/Makefile | 3 + arch/arm/mach-s5p6440/dev-audio.c | 127 ++++++++++++++++++++++++++++++ arch/arm/mach-s5p6440/include/mach/map.h | 6 ++ arch/arm/plat-samsung/include/plat/devs.h | 3 + 4 files changed, 139 insertions(+) create mode 100644 arch/arm/mach-s5p6440/dev-audio.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile index 1ad894b1d3a..a2e99a24976 100644 --- a/arch/arm/mach-s5p6440/Makefile +++ b/arch/arm/mach-s5p6440/Makefile @@ -17,3 +17,6 @@ obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o # machine support obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o + +# device support +obj-y += dev-audio.o diff --git a/arch/arm/mach-s5p6440/dev-audio.c b/arch/arm/mach-s5p6440/dev-audio.c new file mode 100644 index 00000000000..0c536796283 --- /dev/null +++ b/arch/arm/mach-s5p6440/dev-audio.c @@ -0,0 +1,127 @@ +/* linux/arch/arm/mach-s5p6440/dev-audio.c + * + * Copyright (c) 2010 Samsung Electronics Co. Ltd + * Jaswinder Singh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include +#include +#include +#include + +static int s5p6440_cfg_i2s(struct platform_device *pdev) +{ + /* configure GPIO for i2s port */ + switch (pdev->id) { + case -1: + s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5)); + break; + + default: + printk(KERN_ERR "Invalid Device %d\n", pdev->id); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_i2s_pdata = { + .cfg_gpio = s5p6440_cfg_i2s, +}; + +static struct resource s5p6440_iis0_resource[] = { + [0] = { + .start = S5P6440_PA_I2S, + .end = S5P6440_PA_I2S + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_I2S0_TX, + .end = DMACH_I2S0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_I2S0_RX, + .end = DMACH_I2S0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_iis = { + .name = "s3c64xx-iis-v4", + .id = -1, + .num_resources = ARRAY_SIZE(s5p6440_iis0_resource), + .resource = s5p6440_iis0_resource, + .dev = { + .platform_data = &s3c_i2s_pdata, + }, +}; + +/* PCM Controller platform_devices */ + +static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev) +{ + switch (pdev->id) { + case 0: + s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2)); + break; + + default: + printk(KERN_DEBUG "Invalid PCM Controller number!"); + return -EINVAL; + } + + return 0; +} + +static struct s3c_audio_pdata s3c_pcm_pdata = { + .cfg_gpio = s5p6440_pcm_cfg_gpio, +}; + +static struct resource s5p6440_pcm0_resource[] = { + [0] = { + .start = S5P6440_PA_PCM, + .end = S5P6440_PA_PCM + 0x100 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DMACH_PCM0_TX, + .end = DMACH_PCM0_TX, + .flags = IORESOURCE_DMA, + }, + [2] = { + .start = DMACH_PCM0_RX, + .end = DMACH_PCM0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device s5p6440_device_pcm = { + .name = "samsung-pcm", + .id = 0, + .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource), + .resource = s5p6440_pcm0_resource, + .dev = { + .platform_data = &s3c_pcm_pdata, + }, +}; diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h index 8924e5a4d6a..ccbfdaea6eb 100644 --- a/arch/arm/mach-s5p6440/include/mach/map.h +++ b/arch/arm/mach-s5p6440/include/mach/map.h @@ -61,6 +61,12 @@ #define S5P6440_PA_SDRAM (0x20000000) #define S5P_PA_SDRAM S5P6440_PA_SDRAM +/* I2S */ +#define S5P6440_PA_I2S 0xF2000000 + +/* PCM */ +#define S5P6440_PA_PCM 0xF2100000 + /* compatibiltiy defines. */ #define S3C_PA_UART S5P6440_PA_UART #define S3C_PA_IIC S5P6440_PA_IIC0 diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index ebf0387fb20..ef69e56b288 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -77,6 +77,9 @@ extern struct platform_device s5p6442_device_pcm1; extern struct platform_device s5p6442_device_iis0; extern struct platform_device s5p6442_device_iis1; +extern struct platform_device s5p6440_device_pcm; +extern struct platform_device s5p6440_device_iis; + /* s3c2440 specific devices */ #ifdef CONFIG_CPU_S3C2440 -- cgit v1.2.3-70-g09d2 From 838c6d499b780c42fccbbdfecc0f5dcc471d0ef3 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 18 May 2010 12:23:36 +0200 Subject: ARM: SAMSUNG: move driver strength gpio configuration helper to common dir Driver strength parameter can be changed not only on S5PC100 but also on S5PV210/S5PC110 platforms, so move the helper functions to the common plat-samsung directory. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Ben Dooks --- arch/arm/plat-s5p/Kconfig | 1 + arch/arm/plat-s5pc1xx/Kconfig | 2 +- arch/arm/plat-s5pc1xx/Makefile | 1 - arch/arm/plat-s5pc1xx/gpio-config.c | 62 ---------------------- .../plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h | 32 ----------- arch/arm/plat-s5pc1xx/setup-fb-24bpp.c | 1 - arch/arm/plat-samsung/Kconfig | 12 ++--- arch/arm/plat-samsung/gpio-config.c | 48 +++++++++++++++++ arch/arm/plat-samsung/include/plat/gpio-cfg.h | 30 +++++++++++ 9 files changed, 86 insertions(+), 103 deletions(-) delete mode 100644 arch/arm/plat-s5pc1xx/gpio-config.c delete mode 100644 arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index d400a6a20fe..92bd75607b4 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -13,6 +13,7 @@ config PLAT_S5P select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK + select S5P_GPIO_DRVSTR select SAMSUNG_GPIOLIB_4BIT select S3C_GPIO_CFG_S3C64XX select S3C_GPIO_PULL_UPDOWN diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig index c7ccdf22eef..79d3be721dd 100644 --- a/arch/arm/plat-s5pc1xx/Kconfig +++ b/arch/arm/plat-s5pc1xx/Kconfig @@ -16,9 +16,9 @@ config PLAT_S5PC1XX select SAMSUNG_IRQ_VIC_TIMER select S3C_GPIO_TRACK select S3C_GPIO_PULL_UPDOWN + select S5P_GPIO_DRVSTR select S3C_GPIO_CFG_S3C24XX select S3C_GPIO_CFG_S3C64XX - select S5P_GPIO_CFG_S5PC1XX help Base platform code for any Samsung S5PC1XX device diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile index 278f2680608..66a8f3eb707 100644 --- a/arch/arm/plat-s5pc1xx/Makefile +++ b/arch/arm/plat-s5pc1xx/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o # Device setup -obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c deleted file mode 100644 index a4f67e80a15..00000000000 --- a/arch/arm/plat-s5pc1xx/gpio-config.c +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/gpio-config.c - * - * Copyright 2009 Samsung Electronics - * - * S5PC1XX GPIO Configuration. - * - * Based on plat-s3c64xx/gpio-config.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include - -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - void __iomem *reg; - int shift = off * 2; - u32 drvstr; - - if (!chip) - return -EINVAL; - - reg = chip->base + 0x0C; - - drvstr = __raw_readl(reg); - drvstr = 0xffff & (0x3 << shift); - drvstr = drvstr >> shift; - - return (__force s5p_gpio_drvstr_t)drvstr; -} -EXPORT_SYMBOL(s5p_gpio_get_drvstr); - -int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, - s5p_gpio_drvstr_t drvstr) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - void __iomem *reg; - int shift = off * 2; - u32 tmp; - - if (!chip) - return -EINVAL; - - reg = chip->base + 0x0C; - - tmp = __raw_readl(reg); - tmp |= drvstr << shift; - - __raw_writel(tmp, reg); - - return 0; -} -EXPORT_SYMBOL(s5p_gpio_set_drvstr); diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h deleted file mode 100644 index 72ad59f61ef..00000000000 --- a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h - * - * Copyright 2009 Samsung Electronic - * - * S5PC1XX Platform - GPIO pin configuration - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* This file contains the necessary definitions to get the basic gpio - * pin configuration done such as setting a pin to input or output or - * changing the pull-{up,down} configurations. - */ - -#ifndef __GPIO_CFG_S5PC1XX_H -#define __GPIO_CFG_S5PC1XX_H __FILE__ - -typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; - -#define S5P_GPIO_DRVSTR_LV1 0x00 -#define S5P_GPIO_DRVSTR_LV2 0x01 -#define S5P_GPIO_DRVSTR_LV3 0x10 -#define S5P_GPIO_DRVSTR_LV4 0x11 - -extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off); - -extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off, - s5p_gpio_drvstr_t drvstr); - -#endif /* __GPIO_CFG_S5PC1XX_H */ diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c index 1a63768a9a2..b02c36fb10d 100644 --- a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c +++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c @@ -19,7 +19,6 @@ #include #include #include -#include #define DISR_OFFSET 0x7008 diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index c91c21ac5fc..711d5a4cce5 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -90,12 +90,6 @@ config S3C_GPIO_CFG_S3C64XX Internal configuration to enable S3C64XX style GPIO configuration functions. -config S5P_GPIO_CFG_S5PC1XX - bool - help - Internal configuration to enable S5PC1XX style GPIO configuration - functions. - config S3C_GPIO_PULL_UPDOWN bool help @@ -111,6 +105,12 @@ config S3C_GPIO_PULL_UP help Internal configuration to enable the correct GPIO pull helper +config S5P_GPIO_DRVSTR + bool + help + Internal configuration to get and set correct GPIO driver strength + helper + config SAMSUNG_GPIO_EXTRA int "Number of additional GPIO pins" default 0 diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index a76eef53339..57b68a50f45 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -261,3 +261,51 @@ s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, } #endif /* CONFIG_S3C_GPIO_PULL_UP */ +#ifdef CONFIG_S5P_GPIO_DRVSTR +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 drvstr; + + if (!chip) + return -EINVAL; + + off = chip->chip.base - pin; + shift = off * 2; + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = 0xffff & (0x3 << shift); + drvstr = drvstr >> shift; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 tmp; + + if (!chip) + return -EINVAL; + + off = chip->chip.base - pin; + shift = off * 2; + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); +#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 8d01e853df3..34efdd2b032 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -25,6 +25,7 @@ #define __PLAT_GPIO_CFG_H __FILE__ typedef unsigned int __bitwise__ s3c_gpio_pull_t; +typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ struct s3c_gpio_chip; @@ -118,4 +119,33 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); */ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +/* Define values for the drvstr available for each gpio pin. + * + * These values control the value of the output signal driver strength, + * configurable on most pins on the S5C series. + */ +#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00) +#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01) +#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10) +#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11) + +/** + * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the driver streght value for the specified pin. +*/ +extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin); + +/** + * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin + * @pin: The pin number to configure the driver streght value + * @drvstr: The new value of the driver strength + * + * This function sets the driver strength value for the specified pin. + * It will return 0 if successfull, or a negative error code if the pin + * cannot support the requested setting. +*/ +extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); + #endif /* __PLAT_GPIO_CFG_H */ -- cgit v1.2.3-70-g09d2 From 73e59b1d6b69f5ae02e3be5e2b3259c46d8bb27a Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Tue, 4 May 2010 13:12:41 +0200 Subject: ARM: SAMSUNG: Move mach/ts.h to plat/ts.h This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in order to prepare for s3c64xx support in the touchscreen driver. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/ts.h | 21 --------------------- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 3 +-- arch/arm/plat-samsung/include/plat/ts.h | 21 +++++++++++++++++++++ drivers/input/touchscreen/s3c2410_ts.c | 2 +- 5 files changed, 24 insertions(+), 25 deletions(-) delete mode 100644 arch/arm/mach-s3c2410/include/mach/ts.h create mode 100644 arch/arm/plat-samsung/include/plat/ts.h (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h deleted file mode 100644 index dc361700d69..00000000000 --- a/arch/arm/mach-s3c2410/include/mach/ts.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/include/asm/arch-s3c2410/ts.h - * - * Copyright (c) 2005 Arnaud Patard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_TS_H -#define __ASM_ARM_TS_H - -struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; -}; - -extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); - -#endif /* __ASM_ARM_TS_H */ diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index d2a2fad7db9..b1f7dbb3bb6 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include @@ -57,6 +56,7 @@ #include #include #include +#include static struct map_desc h1940_iodesc[] __initdata = { [0] = { diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index cd5b41d0b5a..58583732b29 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -39,8 +39,7 @@ #include #include #include - -#include +#include /* Serial port registrations */ diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h new file mode 100644 index 00000000000..8a51675f6b0 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/ts.h @@ -0,0 +1,21 @@ +/* arch/arm/plat-samsung/include/plat/ts.h + * + * Copyright (c) 2005 Arnaud Patard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +#endif /* __ASM_ARM_TS_H */ diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index 98a7d127948..a2e122878f3 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -37,9 +37,9 @@ #include #include +#include #include -#include #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) -- cgit v1.2.3-70-g09d2 From 5bfdca146edc558ae6b3bac6b05dc5b1f094fbf3 Mon Sep 17 00:00:00 2001 From: Naveen Krishna Date: Tue, 18 May 2010 20:44:27 +0900 Subject: ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen This patch implements cfg_gpio function for Samsung touchscreen. And also modifies the H1940 machine respectively. Signed-off-by: Naveen Krishna Ch Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/mach-h1940.c | 1 + arch/arm/plat-s3c24xx/Kconfig | 5 +++++ arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/setup-ts.c | 34 +++++++++++++++++++++++++++++++++ arch/arm/plat-samsung/include/plat/ts.h | 4 ++++ 6 files changed, 46 insertions(+) create mode 100644 arch/arm/plat-s3c24xx/setup-ts.c (limited to 'arch/arm/plat-samsung/include') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index a4c0b3fcdbb..7245a55795d 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -77,6 +77,7 @@ config ARCH_H1940 select PM_H1940 if PM select S3C_DEV_USB_HOST select S3C_DEV_NAND + select S3C2410_SETUP_TS help Say Y here if you are using the HP IPAQ H1940 diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index b1f7dbb3bb6..779b45b3f80 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -146,6 +146,7 @@ static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = { .delay = 10000, .presc = 49, .oversampling_shift = 2, + .cfg_gpio = s3c24xx_ts_cfg_gpio, }; /** diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 3ce8f010b3c..984bf66826d 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -164,4 +164,9 @@ config S3C24XX_SIMTEC_AUDIO help Add audio devices for common Simtec S3C24XX boards +config S3C2410_SETUP_TS + bool + help + Compile in platform device definition for Samsung TouchScreen. + endif diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 44aea8868f8..c2064c30871 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o # device specific setup and/or initialisation obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o +obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o # SPI gpio central GPIO functions diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/plat-s3c24xx/setup-ts.c new file mode 100644 index 00000000000..ed263866367 --- /dev/null +++ b/arch/arm/plat-s3c24xx/setup-ts.c @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s3c24xx/setup-ts.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on S3C24XX setup for i2c device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +struct platform_device; /* don't need the contents */ + +#include +#include + +/** + * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems + * + * Configure the GPIO for the S3C2410 system, where we have external FETs + * connected to the device (later systems such as the S3C2440 integrate + * these into the device). + */ +void s3c24xx_ts_cfg_gpio(struct platform_device *dev) +{ + s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON); + s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON); + s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON); + s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON); +} diff --git a/arch/arm/plat-samsung/include/plat/ts.h b/arch/arm/plat-samsung/include/plat/ts.h index 8a51675f6b0..26fdb22e0fc 100644 --- a/arch/arm/plat-samsung/include/plat/ts.h +++ b/arch/arm/plat-samsung/include/plat/ts.h @@ -14,8 +14,12 @@ struct s3c2410_ts_mach_info { int delay; int presc; int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); }; extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); + #endif /* __ASM_ARM_TS_H */ -- cgit v1.2.3-70-g09d2