From 359f64f7b3997e94ee71039b5fcdc1278b9b77c4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 15 Sep 2010 10:18:51 -0700 Subject: omap: Fix compile dependency to LEDS_CLASS If we LEDS_CLASS is not selected, we will get undefined reference to `led_classdev_register'. Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index e39a417a368..a92cb499313 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS bool depends on OMAP_DEBUG_DEVICES - default y if LEDS + default y if LEDS_CLASS config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" -- cgit v1.2.3-70-g09d2 From cb922d2596593bac0bf0597eb305cc9bc136cec5 Mon Sep 17 00:00:00 2001 From: Scott Ellis Date: Thu, 23 Sep 2010 18:47:23 -0700 Subject: omap: McBSP: tx_irq_completion used in rx_irq_handler Looks like a typo from commit d6d834b010. Signed-off-by: Scott Ellis Acked-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/mcbsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index e31496e35b0..0c8612fd831 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -156,7 +156,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) /* Writing zero to RSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); } else { - complete(&mcbsp_rx->tx_irq_completion); + complete(&mcbsp_rx->rx_irq_completion); } return IRQ_HANDLED; -- cgit v1.2.3-70-g09d2 From 98d943b02f6f1b57787ff1aa6f34d019a407e3ee Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 29 Sep 2010 16:52:25 +0200 Subject: oprofile, ARM: Release resources on failure This patch fixes a resource leak on failure, where the oprofilefs and some counters may not released properly. Signed-off-by: Robert Richter Acked-by: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: # .35.x LKML-Reference: <20100929145225.GJ13563@erda.amd.com> Signed-off-by: Ingo Molnar --- arch/arm/oprofile/common.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c index 0691176899f..72e09eb642d 100644 --- a/arch/arm/oprofile/common.c +++ b/arch/arm/oprofile/common.c @@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event) if (IS_ERR(pevent)) { ret = PTR_ERR(pevent); } else if (pevent->state != PERF_EVENT_STATE_ACTIVE) { + perf_event_release_kernel(pevent); pr_warning("oprofile: failed to enable event %d " "on CPU %d\n", event, cpu); ret = -EBUSY; @@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ret = init_driverfs(); if (ret) { kfree(counter_config); + counter_config = NULL; return ret; } @@ -402,7 +404,6 @@ void oprofile_arch_exit(void) struct perf_event *event; if (*perf_events) { - exit_driverfs(); for_each_possible_cpu(cpu) { for (id = 0; id < perf_num_counters; ++id) { event = perf_events[cpu][id]; @@ -413,8 +414,10 @@ void oprofile_arch_exit(void) } } - if (counter_config) + if (counter_config) { kfree(counter_config); + exit_driverfs(); + } } #else int __init oprofile_arch_init(struct oprofile_operations *ops) -- cgit v1.2.3-70-g09d2 From 475d92fc6e72cd123dc5dbb9e70cdb80b0cfdf2d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 28 Sep 2010 14:02:02 +0100 Subject: ARM: 6416/1: errata: faulty hazard checking in the Store Buffer may lead to data corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur under very rare conditions due to a store buffer optimisation. This workaround sets a bit in the diagnostic register of the Cortex-A9, disabling the optimisation and preventing the problem from occurring. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 14 ++++++++++++++ arch/arm/mm/proc-v7.S | 8 ++++++++ 2 files changed, 22 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 88c97bc7a6f..9c26ba7244f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1101,6 +1101,20 @@ config ARM_ERRATA_720789 invalidated are not, resulting in an incoherency in the system page tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. + +config ARM_ERRATA_743622 + bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" + depends on CPU_V7 + help + This option enables the workaround for the 743622 Cortex-A9 + (r2p0..r2p2) erratum. Under very rare conditions, a faulty + optimisation in the Cortex-A9 Store Buffer may lead to data + corruption. This workaround sets a specific bit in the diagnostic + register of the Cortex-A9 which disables the Store Buffer + optimisation, preventing the defect from occurring. This has no + visible impact on the overall performance or power consumption of the + processor. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7563ff0141b..75619c55f13 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -253,6 +253,14 @@ __v7_setup: orreq r10, r10, #1 << 22 @ set bit #22 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_743622 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register + orreq r10, r10, #1 << 6 @ set bit #6 + mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE -- cgit v1.2.3-70-g09d2 From 7f58217bb6d39edac68ae0988cdb96a520ad916f Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 30 Sep 2010 09:02:17 +0100 Subject: ARM: 6419/1: mmu: Fix MT_MEMORY and MT_MEMORY_NONCACHED pte flags The commit f1a2481c0 sets up the default flags for MT_MEMORY and MT_MEMORY_NONCACHED memory types. L_PTE_USER flag is wrongly set as default for these entries so remove it. Also adding the 'L_PTE_WRITE' flag so that these pages become read-write instead of just being read-only [this stops them being exposed to userspace, which is the main concern here --rmk] Reported-by: Catalin Marinas Signed-off-by: Santosh Shilimkar Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6a3a2d0cd6d..e8ed9dc461f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -248,7 +248,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC, + L_PTE_WRITE | L_PTE_EXEC, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, @@ -259,7 +259,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_NONCACHED] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, + L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, -- cgit v1.2.3-70-g09d2 From ccdf2e1bca8a45eaf89eb142dbed3551886413fe Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 27 Sep 2010 18:12:12 +0100 Subject: ARM: 6412/1: kprobes-decode: add support for MOVW instruction The MOVW instruction moves a 16-bit immediate into the bottom halfword of the destination register. This patch ensures that kprobes leaves the 16-bit immediate intact, rather than assume a 12-bit immediate and mask out the upper 4 bits. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/kprobes-decode.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 8bccbfa693f..2c1f0050c9c 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx + * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ - if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */ + if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ + (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */ + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; -- cgit v1.2.3-70-g09d2 From cdaf9a2f280b25dd2fb1e04da5d3899411766e1b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 5 Oct 2010 11:29:28 +0100 Subject: ARM: fix section mismatch warnings in Versatile Express WARNING: vmlinux.o(.text+0xbf30): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clocksource_init() The function v2m_timer_init() references the function __init sp804_clocksource_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clocksource_init is wrong. WARNING: vmlinux.o(.text+0xbf3c): Section mismatch in reference from the function v2m_timer_init() to the function .init.text:sp804_clockevents_init() The function v2m_timer_init() references the function __init sp804_clockevents_init(). This is often because v2m_timer_init lacks a __init annotation or the annotation of sp804_clockevents_init is wrong. WARNING: vmlinux.o(.text+0xc524): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:l2x0_init() The function ct_ca9x4_init() references the function __init l2x0_init(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of l2x0_init is wrong. WARNING: vmlinux.o(.text+0xc530): Section mismatch in reference from the function ct_ca9x4_init() to the function .init.text:clkdev_add_table() The function ct_ca9x4_init() references the function __init clkdev_add_table(). This is often because ct_ca9x4_init lacks a __init annotation or the annotation of clkdev_add_table is wrong. WARNING: vmlinux.o(.text+0xc578): Section mismatch in reference from the function ct_ca9x4_init() to the (unknown reference) .init.data:(unknown) The function ct_ca9x4_init() references the (unknown reference) __initdata (unknown). This is often because ct_ca9x4_init lacks a __initdata annotation or the annotation of (unknown) is wrong. Fix these by making ct_ca9x4_init() and v2m_timer_init() both __init. Signed-off-by: Russell King --- arch/arm/mach-vexpress/ct-ca9x4.c | 4 ++-- arch/arm/mach-vexpress/v2m.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index efb127022d4..71fb1734952 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void) } #if 0 -static void ct_ca9x4_timer_init(void) +static void __init ct_ca9x4_timer_init(void) { writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); @@ -222,7 +222,7 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static void ct_ca9x4_init(void) +static void __init ct_ca9x4_init(void) { int i; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 817f0ad38a0..7eaa232180a 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) } -static void v2m_timer_init(void) +static void __init v2m_timer_init(void) { writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); -- cgit v1.2.3-70-g09d2 From 0fa035e52373386381fcdfbd506e32eac0c662f0 Mon Sep 17 00:00:00 2001 From: Hari Kanigeri Date: Fri, 20 Aug 2010 13:50:18 +0000 Subject: omap: iommu-load cam register before flushing the entry The flush_iotlb_page is not loading the cam register before flushing the cam entry. This causes wrong entry to be flushed out from the TLB, and if the entry happens to be a locked TLB entry it would lead to MMU faults. The fix is to load the cam register with the address to be flushed before flushing the TLB entry. Signed-off-by: Hari Kanigeri Acked-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iommu.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index a202a2ce6e3..6cd151b31bc 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } -- cgit v1.2.3-70-g09d2 From 1a95036465e6abdcb639f0d7bb1ec612663caf5b Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 9 Sep 2010 08:56:15 +0900 Subject: ARM: SAMSUNG: Fix build warnings because of unused codes This patch removes following unused codes for removing build warnings. arch/arm/plat-samsung/adc.c:438: warning: unused variable 'flags' arch/arm/mach-s5pv210/clock.c:176: warning: 's5pv210_clk_ip4_ctrl' defined but not used Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/clock.c | 5 ----- arch/arm/plat-samsung/adc.c | 1 - 2 files changed, 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index cfecd70657c..d562670e1b0 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); } -static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable); -} - static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable); diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 04d9521ddc9..e8f2be2d67f 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_adc_resume(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - unsigned long flags; clk_enable(adc->clk); enable_irq(adc->irq); -- cgit v1.2.3-70-g09d2 From 4341f9b38fe33aab51439ae59593e149a6f61d9f Mon Sep 17 00:00:00 2001 From: SeungChull Suh Date: Sat, 2 Oct 2010 12:48:12 +0900 Subject: ARM: S5P: Bug fix on errors of build with CONFIG_PREEMPT_NONE This patch adds header into the below files for build with CONFIG_PREEMPT_NONE. arch/arm/mach-s5p6440/cpu.c arch/arm/mach-s5p6442/cpu.c arch/arm/mach-s5pc100/cpu.c arch/arm/mach-s5pv210/cpu.c Following is error message of in case of s5pv210_defconfig with CONFIG_PREEMPT_NONE. arch/arm/mach-s5pv210/cpu.c:91: error: implicit declaration of function 'need_resched' Signed-off-by: SeungChull Suh [kgene.kim@samsung.com: removed mach-s5p64x0/cpu.c] [kgene.kim@samsung.com: added fix mach-s5p6440/cpu.c] Signed-off-by: Kukjin Kim --- arch/arm/mach-s5p6440/cpu.c | 1 + arch/arm/mach-s5p6442/cpu.c | 1 + arch/arm/mach-s5pc100/cpu.c | 1 + arch/arm/mach-s5pv210/cpu.c | 1 + 4 files changed, 4 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 526f33adb31..ec592e86605 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index a48fb553fd0..70ac681af72 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 251c92ac5b2..cd1afbce83e 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 77f456c91ad..245b82b53df 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From 7cf4b482f06df0b590a9bc1561a5a81d67e0fe4c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 Oct 2010 17:19:10 +0900 Subject: ARM: SAMSUNG: Add a workaround for get_clock() for serial driver Serial drivers call get_clock() very early, before platform bus has been set up, this requires a special check to let them get a proper clock. Without this patch, a serial console is broken on S5PV310 and S5PC210 boards. Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park [kgene.kim@samsung.com: fix coding-style] Signed-off-by: Kukjin Kim Cc: Ben Dooks --- arch/arm/plat-samsung/clock.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 90a20512d68..e8d20b0bc50 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -48,6 +48,9 @@ #include #include +#include +#include /* for s3c24xx_uart_devs */ + /* clock information */ static LIST_HEAD(clocks); @@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable) return 0; } +static int dev_is_s3c_uart(struct device *dev) +{ + struct platform_device **pdev = s3c24xx_uart_devs; + int i; + for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++) + if (*pdev && dev == &(*pdev)->dev) + return 1; + return 0; +} + +/* + * Serial drivers call get_clock() very early, before platform bus + * has been set up, this requires a special check to let them get + * a proper clock + */ + +static int dev_is_platform_device(struct device *dev) +{ + return dev->bus == &platform_bus_type || + (dev->bus == NULL && dev_is_s3c_uart(dev)); +} + /* Clock API calls */ struct clk *clk_get(struct device *dev, const char *id) @@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id) struct clk *clk = ERR_PTR(-ENOENT); int idno; - if (dev == NULL || dev->bus != &platform_bus_type) + if (dev == NULL || !dev_is_platform_device(dev)) idno = -1; else idno = to_platform_device(dev)->id; -- cgit v1.2.3-70-g09d2 From 5c189208b606a85b4e97109af70d59f10a42fdfd Mon Sep 17 00:00:00 2001 From: Anders Larsen Date: Thu, 7 Oct 2010 20:44:15 +0100 Subject: ARM: 6436/1: AT91: Fix power-saving in idle-mode on 926T processors According to Atmel, their 926T processors (AT91 post RM9200) requires 'Wait for Interrupt' mode be entered right after disabling the processor clock in order to minimise current consumption when idle, so do both provided we're not running on a 920T (an RM9200). Furthermore, get rid of the #ifndef CONFIG_DEBUG_KERNEL, since arch_idle() can be turned off completely with the kernel parameter 'nohlt'. Cc: Andrew Victor Signed-off-by: Anders Larsen Signed-off-by: Russell King --- arch/arm/mach-at91/include/mach/system.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index c80e090b367..ee8db152592 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -28,17 +28,16 @@ static inline void arch_idle(void) { -#ifndef CONFIG_DEBUG_KERNEL /* * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#else +#ifndef CONFIG_CPU_ARM920T /* * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Unlike disabling the processor clock via the PMC (above) - * this allows the processor to be woken via JTAG. + * Post-RM9200 processors need this in conjunction with the above + * to save power when idle. */ cpu_do_idle(); #endif -- cgit v1.2.3-70-g09d2 From c0bb5862a9076992e2cbeb5fa0d08c2ac3d4fbb0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 7 Oct 2010 19:34:04 +0100 Subject: ARM: 6435/1: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9 Commit 14eff1812679c76564b775aa95cdd378965f6cfb added proper detection for ARM11MPCore/Cortex-A9 instead of detecting them as ARMv7. However, it was missing the HWCAP_TLS flags. HWCAP_TLS is needed if support for earlier ARMv6 is compiled into the same kernel. Without HWCAP_TLS flags the userspace won't work unless nosmp is specified: Kernel panic - not syncing: Attempted to kill init! CPU0: stopping ] (unwind_backtrace+0x0/0xec) from [] (do_IPI+0xfc/0x184) ] (do_IPI+0xfc/0x184) from [] (__irq_svc+0x9c/0x160) Exception stack(0xc0565f80 to 0xc0565fc8) 5f80: 00000001 c05772a0 00000000 00003a61 c0564000 c05cf500 c003603c c0578600 5fa0: 80033ef0 410fc091 0000001f 00000000 00000000 c0565fc8 c00b91f8 c0057cb4 5fc0: 20000013 ffffffff [] (__irq_svc+0x9c/0x160) from [] (default_idle+0x30/0x38) [] (default_idle+0x30/0x38) from [] (cpu_idle+0x9c/0xf8) [] (cpu_idle+0x9c/0xf8) from [] (start_kernel+0x2a4/0x300) [] (start_kernel+0x2a4/0x300) from [<80008084>] (0x80008084) Signed-off-by: Tony Lindgren Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 75619c55f13..197f21bed5e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -373,7 +373,7 @@ __v7_ca9mp_proc_info: b __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns -- cgit v1.2.3-70-g09d2 From 22377ec5ea0a6d65a712465df33f7c2058ac32aa Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 8 Oct 2010 10:37:40 +0200 Subject: cpuimx27: fix compile when ULPI is selected MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit without this patch we get : arch/arm/mach-imx/built-in.o: In function `eukrea_cpuimx27_init': eukrea_mbimx27-baseboard.c:(.init.text+0x44c): undefined reference to `mxc_ulpi_access_ops' Signed-off-by: Eric Bénard Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c5c0369bb48..2f7e2728970 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -122,6 +122,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND + select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. -- cgit v1.2.3-70-g09d2 From 4793ca4028e4dcdbf2740db50995c9378ded3cf8 Mon Sep 17 00:00:00 2001 From: Eric Bénard Date: Fri, 8 Oct 2010 10:37:41 +0200 Subject: cpuimx27: fix i2c bus selection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Recent clean of i.MX devices registration changed the i2C bus number selected for our platform (Freescale start peripheral ID at 1, kernel now start it at 0 so i.MX27's i2c 1 is kernel's i2c 0). Without this fix, i2c is unusable on this platform. Signed-off-by: Eric Bénard Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mach-cpuimx27.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 575ff1ae85a..ac30883a716 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void) i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - imx27_add_i2c_imx1(&cpuimx27_i2c1_data); + imx27_add_i2c_imx0(&cpuimx27_i2c1_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); -- cgit v1.2.3-70-g09d2 From 10d48b3934940c178635413b5128c33bc17abe1d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 12 Oct 2010 10:37:59 +0100 Subject: ARM: 6440/1: ep93xx: DMA: fix channel_disable When channel_disable() is called, it disables per channel interrupts and waits until channels state becomes STATE_STALL, and then disables the channel. Now, if the DMA transfer is disabled while the channel is in STATE_NEXT we will not wait anything and disable the channel immediately. This seems to cause weird data corruption for example in audio transfers. Fix is to wait while we are in STATE_NEXT or STATE_ON and only then disable the channel. Signed-off-by: Mika Westerberg Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/dma-m2p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index 8904ca4e2e2..a696d354b1f 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch) v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); m2p_set_control(ch, v); - while (m2p_channel_state(ch) == STATE_ON) + while (m2p_channel_state(ch) >= STATE_ON) cpu_relax(); m2p_set_control(ch, 0x0); -- cgit v1.2.3-70-g09d2 From 06c10884486a63a1e4ff657aaa51e848e64b9dc3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 13 Oct 2010 00:15:25 +0100 Subject: ARM: relax ioremap prohibition (309caa9) for -final and -stable ... but produce a big warning about the problem as encouragement for people to fix their drivers. Signed-off-by: Russell King --- arch/arm/mm/ioremap.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ab506272b2d..17e7b0b57e4 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, /* * Don't allow RAM to be mapped - this causes problems with ARMv6+ */ - if (WARN_ON(pfn_valid(pfn))) - return NULL; + if (pfn_valid(pfn)) { + printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n" + KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" + KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n"); + WARN_ON(1); + } type = get_mem_type(mtype); if (!type) -- cgit v1.2.3-70-g09d2