From 7a9f0604bd56936b2b18f49824e0e392dc7878c3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 5 Jan 2015 15:19:08 -0200 Subject: ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling GPIO2_5 is the reset GPIO for the USB3317 ULPI PHY. Instead of modelling it as a regulator, the correct approach is to use the 'reset_gpios' property of the "usb-nop-xceiv" node. GPIO1_7 is the reset GPIO for the USB2517 USB hub. As we currently don't have dt bindings to describe a HUB reset, let's keep using the regulator approach. Rename the regulator to 'reg_hub_reset' to better describe its function and bind it with the USB host1 port instead. USB host support has been introduced by commit 9bf206a9d13be3 ("ARM: dts: imx51-babbage: Add USB Host1 support"), which landed in 3.16 and it seems that USB has only been functional due to previous bootloader initialization. With this patch applied we can get USB host to work without relying on the bootloader. Cc: # 3.16+ Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx51-babbage.dts | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa7..649befeb2cf 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; -- cgit v1.2.3-70-g09d2