From 1db550118c46d96f371de5b3d0bd51edb148bd54 Mon Sep 17 00:00:00 2001 From: Jason Chagas Date: Mon, 15 Nov 2010 09:50:12 +0800 Subject: ARM: mmp2: remove not used clk_rtc RTC clock will remain at 32KHz and powered on, there is no need for it at this moment. Signed-off-by: Jason Chagas Signed-off-by: Eric Miao --- arch/arm/mach-mmp/mmp2.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index daf3993349f..2e3dd08ccc3 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(rtc, MMP2_RTC, 0, 32768); static APMU_CLK(nand, NAND, 0xbf, 100000000); -- cgit v1.2.3-70-g09d2 From 9f1ee150fc7039eb65039ab17d9a95dfa6250133 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 6 Nov 2010 23:34:03 +0100 Subject: ARM: pxa/palm: fix ifdef around gen_nand driver registration Reported-by: Rafael Gandolfi Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index d2060a1d1d6..e5c9932b758 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {} /****************************************************************************** * NAND Flash ******************************************************************************/ -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { -- cgit v1.2.3-70-g09d2 From 9f5ead76d402f591ab810e71eae59ec28bf39eb9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 1 Dec 2010 10:55:46 +0000 Subject: omap: PM debug: fix wake-on-timer debugfs dependency Wakeup-on-timer code does not have/need debugfs dependency. Move the function out of debugfs ifdef. Fixes compile error when CONFIG_DEBUG_FS is disabled but PM debug is enabled. Reported-by: Tony Lindgren Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm-debug.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 5e81517a7af..a8afb610c7d 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us) printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); } +void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) +{ + u32 tick_rate, cycles; + + if (!seconds && !milliseconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %u.%03u secs" + " (%d ticks at %d ticks/sec.)\n", + seconds, milliseconds, cycles, tick_rate); +} + #ifdef CONFIG_DEBUG_FS #include #include @@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) pwrdm->timer = t; } -void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) { struct seq_file *s = (struct seq_file *)user; -- cgit v1.2.3-70-g09d2 From f811036476d7c8a9b594ebcdcf481bdbe497eb13 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Fri, 26 Nov 2010 23:59:24 +0000 Subject: omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD This patch complements ed919b0 "mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD" by declaring MMC_CAP_POWER_OFF_CARD on the ZOOM's wl1271 mmc slot. This is required in order not to break runtime PM support for the wl1271 sdio driver. Signed-off-by: Ohad Ben-Cohen Signed-off-by: Chris Ball Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 86c9b210295..9db9203667d 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "wl1271", .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, .gpio_wp = -EINVAL, .gpio_cd = -EINVAL, .nonremovable = true, -- cgit v1.2.3-70-g09d2 From cb9675f3282f5565cc9e3698cc847355c1194871 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Fri, 26 Nov 2010 17:06:02 +0000 Subject: arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check clk_get() returns ERR_PTR() on error, not NULL. Signed-off-by: Vasiliy Kulikov Acked-by: Kevin Hilman [tony@atomide.com: updated to include err.h to compile on omap1] Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/counter_32k.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 155fe43a672..8722a136f3a 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void) return -ENODEV; sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); - if (sync_32k_ick) + if (!IS_ERR(sync_32k_ick)) clk_enable(sync_32k_ick); clocksource_32k.mult = clocksource_hz2mult(32768, -- cgit v1.2.3-70-g09d2 From e281f7ec95fbbf905c10e11c83231f3d9090c22f Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 30 Nov 2010 14:17:58 +0000 Subject: arm: omap2: io: fix clk_get() error check clk_get() return value should be checked with IS_ERR(). Signed-off-by: Aaro Koskinen Acked-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 40562ddd3ee..a1939b1e6f8 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void) return 0; dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); - if (!dpll3_m2_ck) + if (IS_ERR(dpll3_m2_ck)) return -EINVAL; rate = clk_get_rate(dpll3_m2_ck); -- cgit v1.2.3-70-g09d2 From 28dd31983f6c3a4d89369ff8f0c93de2cda868db Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Dec 2010 01:02:12 +0000 Subject: OMAP1: SRAM: fix size for OMAP1611 SoCs Kernel was failing to boot on omap1611 based OSK boards due to mis-configured SRAM size. Existing code was using a hard-coded value for 250k, which was then rounded down by PAGE_SIZE. Increasing this to 256k allows kernel to boot on omap1611 SoCs. Problem reported by and initial fix suggested by Tim Bird. Thanks to Tony Lindgren for helping diagnose the problem to being specific to OMAP1611 and not affecting OMAP1610/OMAP1623. Reported-by: Tim Bird Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/sram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e2c8eebe6b3..74dac419d32 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -166,7 +166,7 @@ static void __init omap_detect_sram(void) cpu_is_omap1710()) omap_sram_size = 0x4000; /* 16K */ else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; /* 250K */ + omap_sram_size = SZ_256K; else { printk(KERN_ERR "Could not detect SRAM size\n"); omap_sram_size = 0x4000; -- cgit v1.2.3-70-g09d2 From e83df17f178360a8e7874441bca04a710c869e42 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 8 Dec 2010 22:40:40 +0000 Subject: OMAP2+: PM/serial: fix console semaphore acquire during suspend commit 0d8e2d0dad98a693bad88aea6876ac8b94ad95c6 (OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled) added use of the console semaphore to protect UARTs from being accessed after disabled during idle, but this causes problems in suspend. During suspend, the console semaphore is acquired by the console suspend method (console_suspend()) so the try_acquire_console_sem() will always fail and suspend will be aborted. To fix, introduce a check so the console semaphore is only attempted during idle, and not during suspend. Also use the same check so that the console semaphore is not prematurely released during resume. Thanks to Paul Walmsley for suggesting adding the same check during resume. Cc: Paul Walmsley Tested-by: Jean Pihet Tested-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm24xx.c | 34 +++++++++++++++++++++++++++++++--- arch/arm/mach-omap2/pm34xx.c | 27 ++++++++++++++++++++------- 2 files changed, 51 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index c85923e56b8..aaeea49b9bd 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -53,6 +53,19 @@ #include #include +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state = PM_SUSPEND_ON; +static inline bool is_suspending(void) +{ + return (suspend_state != PM_SUSPEND_ON); +} +#else +static inline bool is_suspending(void) +{ + return false; +} +#endif + static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); @@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void) goto no_sleep; /* Block console output in case it is on one of the OMAP UARTs */ - if (try_acquire_console_sem()) - goto no_sleep; + if (!is_suspending()) + if (try_acquire_console_sem()) + goto no_sleep; omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); @@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); - release_console_sem(); + if (!is_suspending()) + release_console_sem(); no_sleep: if (omap2_pm_debug) { @@ -284,6 +299,12 @@ out: local_irq_enable(); } +static int omap2_pm_begin(suspend_state_t state) +{ + suspend_state = state; + return 0; +} + static int omap2_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ @@ -333,10 +354,17 @@ static void omap2_pm_finish(void) enable_hlt(); } +static void omap2_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap2_pm_begin, .prepare = omap2_pm_prepare, .enter = omap2_pm_enter, .finish = omap2_pm_finish, + .end = omap2_pm_end, .valid = suspend_valid_only_mem, }; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0ec8a04b747..648b8c50d02 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -50,6 +50,19 @@ #include "sdrc.h" #include "control.h" +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state = PM_SUSPEND_ON; +static inline bool is_suspending(void) +{ + return (suspend_state != PM_SUSPEND_ON); +} +#else +static inline bool is_suspending(void) +{ + return false; +} +#endif + /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 #define OMAP343X_TABLE_VALUE_OFFSET 0xc0 @@ -387,10 +400,11 @@ void omap_sram_idle(void) } /* Block console output in case it is on one of the OMAP UARTs */ - if (per_next_state < PWRDM_POWER_ON || - core_next_state < PWRDM_POWER_ON) - if (try_acquire_console_sem()) - goto console_still_active; + if (!is_suspending()) + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; /* PER */ if (per_next_state < PWRDM_POWER_ON) { @@ -470,7 +484,8 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } - release_console_sem(); + if (!is_suspending()) + release_console_sem(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -514,8 +529,6 @@ out: } #ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state; - static int omap3_pm_prepare(void) { disable_hlt(); -- cgit v1.2.3-70-g09d2 From c2015dc88a57090bcf67ab7cfcdbc34671598d36 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 6 Dec 2010 20:52:40 +0000 Subject: OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks After Charu's GPIO hwmod patches, GPIO initialization on N800 emits the following messages for all GPIO banks: omap_hwmod: gpio1: cannot be enabled (3) This is due to OMAP24XX_ST_GPIOS_SHIFT being defined as a bitmask. Fix this and also fix two other macros that had the same problem. Thanks to Tony Lindgren for originally reporting this bug. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prcm-common.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 298a22a754e..f81acee4738 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -243,13 +243,14 @@ #define OMAP24XX_EN_GPT1_MASK (1 << 0) /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ -#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) -#define OMAP24XX_ST_GPIOS_MASK 2 -#define OMAP24XX_ST_GPT1_SHIFT (1 << 0) -#define OMAP24XX_ST_GPT1_MASK 0 +#define OMAP24XX_ST_GPIOS_SHIFT 2 +#define OMAP24XX_ST_GPIOS_MASK (1 << 2) +#define OMAP24XX_ST_GPT1_SHIFT 0 +#define OMAP24XX_ST_GPT1_MASK (1 << 0) /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ -#define OMAP2430_ST_MDM_SHIFT (1 << 0) +#define OMAP2430_ST_MDM_SHIFT 0 +#define OMAP2430_ST_MDM_MASK (1 << 0) /* 3430 register bits shared between CM & PRM registers */ -- cgit v1.2.3-70-g09d2 From f91e2c3bd427239c198351f44814dd39db91afe0 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Dec 2010 16:52:04 +0100 Subject: ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7 The current implementation of the dcache_line_size macro reads the L1 cache size from the CCSIDR register. This, however, is not guaranteed to be the smallest cache line in the cache hierarchy. The patch changes to the macro to use the more architecturally correct CTR register. Reported-by: Kevin Sapp Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-macros.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 7d63beaf974..321555b894d 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -61,14 +61,14 @@ .endm /* - * cache_line_size - get the cache line size from the CSIDR register - * (available on ARMv7+). It assumes that the CSSR register was configured - * to access the L1 data cache CSIDR. + * dcache_line_size - get the minimum D-cache line size from the CTR register + * on ARMv7. */ .macro dcache_line_size, reg, tmp - mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR - and \tmp, \tmp, #7 @ cache line size encoding - mov \reg, #16 @ size offset + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + lsr \tmp, \tmp, #16 + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size .endm -- cgit v1.2.3-70-g09d2 From da30e0ac0f9a521f0cfec8145ddd1ad131f66d61 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 7 Dec 2010 16:56:29 +0100 Subject: ARM: 6528/1: Use CTR for the I-cache line size on ARMv7 The current implementation of the v7_coherent_*_range function assumes that the D and I cache lines have the same size, which is incorrect architecturally. This patch adds the icache_line_size macro which reads the CTR register. The main loop in v7_coherent_*_range is split in two independent loops or the D and I caches. This also has the performance advantage that the DSB is moved outside the main loop. Reported-by: Kevin Sapp Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-v7.S | 27 +++++++++++++++++---------- arch/arm/mm/proc-macros.S | 10 ++++++++++ 2 files changed, 27 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index a3ebf7a4f49..6136e68ce95 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range) UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 - bic r0, r0, r3 + bic r12, r0, r3 1: - USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification + USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification + add r12, r12, r2 + cmp r12, r1 + blo 1b dsb - USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line - add r0, r0, r2 + icache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 2: - cmp r0, r1 - blo 1b + USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line + add r12, r12, r2 + cmp r12, r1 + blo 2b +3: mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB @@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range) * isn't mapped, just try the next page. */ 9001: - mov r0, r0, lsr #12 - mov r0, r0, lsl #12 - add r0, r0, #4096 - b 2b + mov r12, r12, lsr #12 + mov r12, r12, lsl #12 + add r12, r12, #4096 + b 3b UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 321555b894d..b795afd0a2c 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -72,6 +72,16 @@ mov \reg, \reg, lsl \tmp @ actual cache line size .endm +/* + * icache_line_size - get the minimum I-cache line size from the CTR register + * on ARMv7. + */ + .macro icache_line_size, reg, tmp + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word + mov \reg, \reg, lsl \tmp @ actual cache line size + .endm /* * Sanity check the PTE configuration for the code below - which makes -- cgit v1.2.3-70-g09d2 From 440e2e4759805437f89f7eda78de72cb46729d04 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 12 Dec 2010 23:24:28 +0000 Subject: ARM: Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 183 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 179 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 55590a4d87c..2fea897ebeb 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Sep 9 22:43:01 2010 +# Last update: Sun Dec 12 23:24:27 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2321,7 +2321,7 @@ mx31txtr MACH_MX31TXTR MX31TXTR 2332 u380 MACH_U380 U380 2333 oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334 npcmx50 MACH_NPCMX50 NPCMX50 2335 -mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336 +mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336 mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337 riom MACH_RIOM RIOM 2338 comcas MACH_COMCAS COMCAS 2339 @@ -2355,7 +2355,7 @@ at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366 csb732 MACH_CSB732 CSB732 2367 u8500 MACH_U8500 U8500 2368 huqiu MACH_HUQIU HUQIU 2369 -mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370 +mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370 pmt1g MACH_PMT1G PMT1G 2371 htcelf MACH_HTCELF HTCELF 2372 armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373 @@ -2971,7 +2971,7 @@ premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 wasabi MACH_WASABI WASABI 2986 vivow MACH_VIVOW VIVOW 2987 mx50_rdp MACH_MX50_RDP MX50_RDP 2988 -universal MACH_UNIVERSAL UNIVERSAL 2989 +universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989 real6410 MACH_REAL6410 REAL6410 2990 spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 @@ -3044,3 +3044,178 @@ harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 spear900 MACH_SPEAR900 SPEAR900 3061 pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 +rdstor MACH_RDSTOR RDSTOR 3063 +usdloader MACH_USDLOADER USDLOADER 3064 +tsoploader MACH_TSOPLOADER TSOPLOADER 3065 +kronos MACH_KRONOS KRONOS 3066 +ffcore MACH_FFCORE FFCORE 3067 +mone MACH_MONE MONE 3068 +unit2s MACH_UNIT2S UNIT2S 3069 +acer_a5 MACH_ACER_A5 ACER_A5 3070 +etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071 +stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072 +p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073 +tulip MACH_TULIP TULIP 3074 +sunflower MACH_SUNFLOWER SUNFLOWER 3075 +rib MACH_RIB RIB 3076 +clod MACH_CLOD CLOD 3077 +rump MACH_RUMP RUMP 3078 +tenderloin MACH_TENDERLOIN TENDERLOIN 3079 +shortloin MACH_SHORTLOIN SHORTLOIN 3080 +crespo MACH_CRESPO CRESPO 3081 +antares MACH_ANTARES ANTARES 3082 +wb40n MACH_WB40N WB40N 3083 +herring MACH_HERRING HERRING 3084 +naxy400 MACH_NAXY400 NAXY400 3085 +naxy1200 MACH_NAXY1200 NAXY1200 3086 +vpr200 MACH_VPR200 VPR200 3087 +bug20 MACH_BUG20 BUG20 3088 +goflexnet MACH_GOFLEXNET GOFLEXNET 3089 +torbreck MACH_TORBRECK TORBRECK 3090 +saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091 +callisto MACH_CALLISTO CALLISTO 3092 +multhsu MACH_MULTHSU MULTHSU 3093 +saluda MACH_SALUDA SALUDA 3094 +pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095 +vc0718 MACH_VC0718 VC0718 3096 +mvblx MACH_MVBLX MVBLX 3097 +inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098 +inhand_fury MACH_INHAND_FURY INHAND_FURY 3099 +inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100 +hdnvp MACH_HDNVP HDNVP 3101 +softwinner MACH_SOFTWINNER SOFTWINNER 3102 +prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 +nas6210 MACH_NAS6210 NAS6210 3104 +unisdev MACH_UNISDEV UNISDEV 3105 +sbca11 MACH_SBCA11 SBCA11 3106 +saga MACH_SAGA SAGA 3107 +ns_k330 MACH_NS_K330 NS_K330 3108 +tanna MACH_TANNA TANNA 3109 +imate8502 MACH_IMATE8502 IMATE8502 3110 +aspen MACH_ASPEN ASPEN 3111 +daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112 +zmx25 MACH_ZMX25 ZMX25 3113 +maple1 MACH_MAPLE1 MAPLE1 3114 +qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115 +qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116 +abilene MACH_ABILENE ABILENE 3117 +eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118 +iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119 +coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120 +santiago MACH_SANTIAGO SANTIAGO 3121 +mx257sol MACH_MX257SOL MX257SOL 3122 +strasbourg MACH_STRASBOURG STRASBOURG 3123 +msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124 +smartqv5 MACH_SMARTQV5 SMARTQV5 3125 +smartqv3 MACH_SMARTQV3 SMARTQV3 3126 +smartqv7 MACH_SMARTQV7 SMARTQV7 3127 +paz00 MACH_PAZ00 PAZ00 3128 +acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 +htcwillow MACH_HTCWILLOW HTCWILLOW 3130 +fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131 +hdgu MACH_HDGU HDGU 3132 +pyramid MACH_PYRAMID PYRAMID 3133 +epiphan MACH_EPIPHAN EPIPHAN 3134 +omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135 +gurnard MACH_GURNARD GURNARD 3136 +gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137 +bcm2708 MACH_BCM2708 BCM2708 3138 +mx51_ggc MACH_MX51_GGC MX51_GGC 3139 +sharespace MACH_SHARESPACE SHARESPACE 3140 +haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141 +simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142 +crux MACH_CRUX CRUX 3143 +mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144 +charon MACH_CHARON CHARON 3145 +picocom3 MACH_PICOCOM3 PICOCOM3 3146 +picocom4 MACH_PICOCOM4 PICOCOM4 3147 +serrano MACH_SERRANO SERRANO 3148 +doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149 +evsy MACH_EVSY EVSY 3150 +huashan MACH_HUASHAN HUASHAN 3151 +lausanne MACH_LAUSANNE LAUSANNE 3152 +emerald MACH_EMERALD EMERALD 3153 +tqma35 MACH_TQMA35 TQMA35 3154 +marvel MACH_MARVEL MARVEL 3155 +manuae MACH_MANUAE MANUAE 3156 +chacha MACH_CHACHA CHACHA 3157 +lemon MACH_LEMON LEMON 3158 +csc MACH_CSC CSC 3159 +gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160 +t20 MACH_T20 T20 3161 +hdmini MACH_HDMINI HDMINI 3162 +sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163 +express MACH_EXPRESS EXPRESS 3164 +express_kt MACH_EXPRESS_KT EXPRESS_KT 3165 +maximasp MACH_MAXIMASP MAXIMASP 3166 +nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167 +nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168 +sunfire MACH_SUNFIRE SUNFIRE 3169 +arowana MACH_AROWANA AROWANA 3170 +tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171 +tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172 +edison MACH_EDISON EDISON 3173 +svp8500v1 MACH_SVP8500V1 SVP8500V1 3174 +svp8500v2 MACH_SVP8500V2 SVP8500V2 3175 +svp5500 MACH_SVP5500 SVP5500 3176 +b5500 MACH_B5500 B5500 3177 +s5500 MACH_S5500 S5500 3178 +icon MACH_ICON ICON 3179 +elephant MACH_ELEPHANT ELEPHANT 3180 +msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181 +shooter MACH_SHOOTER SHOOTER 3182 +spade_lte MACH_SPADE_LTE SPADE_LTE 3183 +philhwani MACH_PHILHWANI PHILHWANI 3184 +gsncomm MACH_GSNCOMM GSNCOMM 3185 +strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186 +mmm MACH_MMM MMM 3187 +davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188 +ag5evm MACH_AG5EVM AG5EVM 3189 +sc575plc MACH_SC575PLC SC575PLC 3190 +sc575hmi MACH_SC575IPC SC575IPC 3191 +omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192 +g7 MACH_G7 G7 3193 +top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194 +top9000_su MACH_TOP9000_SU TOP9000_SU 3195 +utm300 MACH_UTM300 UTM300 3196 +tsunagi MACH_TSUNAGI TSUNAGI 3197 +ts75xx MACH_TS75XX TS75XX 3198 +msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199 +ts47xx MACH_TS47XX TS47XX 3200 +da850_k5 MACH_DA850_K5 DA850_K5 3201 +ax502 MACH_AX502 AX502 3202 +igep0032 MACH_IGEP0032 IGEP0032 3203 +antero MACH_ANTERO ANTERO 3204 +synergy MACH_SYNERGY SYNERGY 3205 +ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 +wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 +punica MACH_PUNICA PUNICA 3208 +sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 +mackerel MACH_MACKEREL MACKEREL 3211 +fa9x27 MACH_FA9X27 FA9X27 3213 +ns2816tb MACH_NS2816TB NS2816TB 3214 +ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215 +ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216 +kaen MACH_KAEN KAEN 3217 +nv1000 MACH_NV1000 NV1000 3218 +nuc950ts MACH_NUC950TS NUC950TS 3219 +nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220 +ast2200 MACH_AST2200 AST2200 3221 +lead MACH_LEAD LEAD 3222 +unino1 MACH_UNINO1 UNINO1 3223 +greeco MACH_GREECO GREECO 3224 +verdi MACH_VERDI VERDI 3225 +dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226 +quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227 +abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228 +svcid MACH_SVCID SVCID 3229 +msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230 +msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231 +icon_g MACH_ICON_G ICON_G 3232 +mb3 MACH_MB3 MB3 3233 +gsia18s MACH_GSIA18S GSIA18S 3234 +pivicc MACH_PIVICC PIVICC 3235 +pcm048 MACH_PCM048 PCM048 3236 +dds MACH_DDS DDS 3237 +chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 -- cgit v1.2.3-70-g09d2 From 6e6fc998b8c127fe06b9350a1f16e41bfe4f109d Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 13 Dec 2010 21:53:53 +0100 Subject: ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6 This makes sense, because Thumb-2 code can't execute on plain ARMv6 processors. This will avoid accidentally configuring a broken kernel where the config otherwise would allow multiple architecture versions to coexist in the same kernel. Not adding !CPU_V5 etc., because the chance of anyone trying to put v5 and v7 in the same kernel is low, and I'm not aware of any mach which can do this. These could be added later if it matters. Note that the rules may need to be refined if support for the ARM1156J(F)-S processor is later added to the kernel, since this processor supports the rare ARMv6T2 extensions, which add support for Thumb-2 and a few other ARMv7 features. Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Acked-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f1d9297b105..bf1f8dba02f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1311,7 +1311,7 @@ config HZ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" - depends on CPU_V7 && EXPERIMENTAL + depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED help -- cgit v1.2.3-70-g09d2 From 593c252a731389ffdd00d4cb2d20192c47aa18c1 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 13 Dec 2010 21:56:03 +0100 Subject: ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL Because the nwfpe support is unlikely to be used on new platforms and requires CONFIG_OABI_COMPAT, which is not generally used with ARMv7+, we shouldn't expect to build nwfpe support into a Thumb-2 kernel. At present, nwfpe contains assembly code which isn't Thumb-2 compatible, and for now it doesn't appear useful to port this code. All ARMv7-A/R platforms necessarily have VFPv3 hardware floating- point natively, making emulation unnecessary. Signed-off-by: Dave Martin Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Acked-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bf1f8dba02f..d56d21c0573 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected" config FPE_NWFPE bool "NWFPE math emulation" - depends on !AEABI || OABI_COMPAT + depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL ---help--- Say Y to include the NWFPE floating point emulator in the kernel. This is necessary to run most binaries. Linux does not currently -- cgit v1.2.3-70-g09d2 From 85b093bcc5322baa811a03ec73de0909c157f181 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Tue, 14 Dec 2010 00:03:16 +0100 Subject: ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix Cache ownership must be acquired by reading/writing data from the cache line to make cache operation have the desired effect on the SMP MPCore CPU. However, the ownership is never acquired in the v6_dma_inv_range function when cleaning the first line and flushing the last one, in case the address is not aligned to D_CACHE_LINE_SIZE boundary. Fix this by reading/writing data if needed, before performing cache operations. While at it, fix v6_dma_flush_range to prevent RWFO outside the buffer. Cc: stable@kernel.org Signed-off-by: Valentine Barshak Signed-off-by: George G. Davis Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/cache-v6.S | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 99fa688dfad..c96fa1b3f49 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area) * - end - virtual end address of region */ v6_dma_inv_range: +#ifdef CONFIG_DMA_CACHE_RWFO + ldrb r2, [r0] @ read for ownership + strb r2, [r0] @ write for ownership +#endif tst r0, #D_CACHE_LINE_SIZE - 1 bic r0, r0, #D_CACHE_LINE_SIZE - 1 #ifdef HARVARD_CACHE @@ -211,6 +215,10 @@ v6_dma_inv_range: mcrne p15, 0, r0, c7, c11, 1 @ clean unified line #endif tst r1, #D_CACHE_LINE_SIZE - 1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrneb r2, [r1, #-1] @ read for ownership + strneb r2, [r1, #-1] @ write for ownership +#endif bic r1, r1, #D_CACHE_LINE_SIZE - 1 #ifdef HARVARD_CACHE mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line @@ -218,10 +226,6 @@ v6_dma_inv_range: mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line #endif 1: -#ifdef CONFIG_DMA_CACHE_RWFO - ldr r2, [r0] @ read for ownership - str r2, [r0] @ write for ownership -#endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c6, 1 @ invalidate D line #else @@ -229,6 +233,10 @@ v6_dma_inv_range: #endif add r0, r0, #D_CACHE_LINE_SIZE cmp r0, r1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrlo r2, [r0] @ read for ownership + strlo r2, [r0] @ write for ownership +#endif blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer @@ -263,12 +271,12 @@ v6_dma_clean_range: * - end - virtual end address of region */ ENTRY(v6_dma_flush_range) - bic r0, r0, #D_CACHE_LINE_SIZE - 1 -1: #ifdef CONFIG_DMA_CACHE_RWFO - ldr r2, [r0] @ read for ownership - str r2, [r0] @ write for ownership + ldrb r2, [r0] @ read for ownership + strb r2, [r0] @ write for ownership #endif + bic r0, r0, #D_CACHE_LINE_SIZE - 1 +1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line #else @@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range) #endif add r0, r0, #D_CACHE_LINE_SIZE cmp r0, r1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrlob r2, [r0] @ read for ownership + strlob r2, [r0] @ write for ownership +#endif blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer -- cgit v1.2.3-70-g09d2 From a74b74a5555c741ed3df896096e33b853995631e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 15 Dec 2010 07:20:16 +0800 Subject: ARM: pxa: PXA_ESERIES depends on FB_W100. As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dd235ecc9d6..c93e73d54dd 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -540,6 +540,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x + select FB_W100 config MACH_E330 bool "Toshiba e330" -- cgit v1.2.3-70-g09d2 From 258b78c364b9d3f730b5e3187fc500d472b5c237 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 3 Dec 2010 21:22:42 +0900 Subject: ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entry Should be CONFIG_S3C_DEV_NAND instead of CONFIG_S3C_DEVICE_NAND. Cc: Ben Dooks Signed-off-by: Kukjin Kim --- arch/arm/plat-s3c24xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5a27b1b538f..eb105e61c74 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -8,7 +8,7 @@ config PLAT_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB - select S3C_DEVICE_NAND + select S3C_DEV_NAND select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device -- cgit v1.2.3-70-g09d2 From 0f8f9c2b6c1326e99e51729a5d4aeb9c3ce164e1 Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Fri, 17 Dec 2010 14:45:01 +0900 Subject: ARM S3C24XX: Fix compilation of PM code for S3C2416 S3C2416 PM code uses low-level sleep routines from S3C2412 code, but these routines are compiled only for S3C2412 SoC. Split S3C2412_PM to two parts: S3C2412_PM, S3C2412_PM_SLEEP and select last in S3C2416's Kconfig. Signed-off-by: Yauhen Kharuzhy Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c2412/Kconfig | 7 +++++++ arch/arm/mach-s3c2412/Makefile | 3 ++- arch/arm/mach-s3c2416/Kconfig | 1 + 3 files changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index fa2e5bffbb8..6983cb4d4ca 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -28,9 +28,16 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2412 power management +config S3C2412_PM_SLEEP + bool + help + Internal config node to apply sleep for S3C2412 power management. + Can be selected by another SoCs with similar sleep procedure. + # Note, the S3C2412 IOtiming support is in plat-s3c24xx config S3C2412_CPUFREQ diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 530ec46cbae..6c48a91ea39 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2412_PM) += pm.o +obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o # Machine support diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 27b3e7c9d61..df8d14974c9 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -27,6 +27,7 @@ config S3C2416_DMA config S3C2416_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2416 power management -- cgit v1.2.3-70-g09d2 From cb1868869dce7b751b670aadfc1f1360bc224b29 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 17 Dec 2010 14:47:42 +0900 Subject: ARM: S5PV210: update MAX8998 platform data to get rid of WARN() This patch adds new entries required by the new version of MAX8998 driver. Without them, the driver fails to init. See commit 50f19a4596 Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-aquila.c | 6 ++++++ arch/arm/mach-s5pv210/mach-goni.c | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 28677caf361..461aa035afc 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = { static struct max8998_platform_data aquila_max8998_pdata = { .num_regulators = ARRAY_SIZE(aquila_regulators), .regulators = aquila_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b1dcf964a76..e22d5112fd4 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = { static struct max8998_platform_data goni_max8998_pdata = { .num_regulators = ARRAY_SIZE(goni_regulators), .regulators = goni_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif -- cgit v1.2.3-70-g09d2 From 676b14c36de5bea83f7666e5f5965188426b97a7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 15 Dec 2010 10:59:24 +0000 Subject: ARM: mach-shmobile: fix compile warning in mm/init.c Turn down the warning noise from the compiler, basically a SH-Mobile specific version of the patch located in the RMK patch tracker: 6484/1: "fix compile warning in mm/init.c", Without this patch the following warning triggers: CC arch/arm/kernel/sys_arm.o arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' CC arch/arm/kernel/traps.o Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/vmalloc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h index 4aecf6e3a85..2b8fd8b942f 100644 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -2,6 +2,6 @@ #define __ASM_MACH_VMALLOC_H /* Vmalloc at ... - 0xe5ffffff */ -#define VMALLOC_END 0xe6000000 +#define VMALLOC_END 0xe6000000UL #endif /* __ASM_MACH_VMALLOC_H */ -- cgit v1.2.3-70-g09d2 From 1cf215a5b43950d1a304373037828158057ff9fc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 17 Dec 2010 15:15:48 +0900 Subject: ARM: mach-shmobile: INTC interrupt priority level demux fix Fix interrupt priority level handling on SH-Mobile ARM. SH-Mobile ARM platforms using multiple interrupt priority levels need this patch to fix a potential dead lock that may occur if multiple interrupts with different levels are pending simultaneously. The default INTC configuration is to use the same priority level for all interrupts, so this issue does not trigger by default. It is however common for board code to override the interrupt priority for certain interrupt sources depending on the application. Without this fix such boards may lock up. In detail, this patch updates the INTC code in entry-macro.S to make sure that the INTLVLA register gets set as expected. To trigger this bug modify the board specific code to adjust the interrupt priority level for the ethernet chip. After changing the priority level simply use flood ping to drown the board with interrupts. This patch applies to INTCA-based processors such as sh7372, sh7377 and sh7372. GIC-based processors are not affected. Suitable for v2.6.37-rc and stable from v2.6.34 to v2.6.36. Cc: stable@kernel.org Signed-off-by: Magnus Damm Tested-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/entry-macro.S | 30 ++++++++++++++++++++--- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index a285d13c741..f428c4db2b6 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -1,4 +1,5 @@ /* + * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify @@ -14,24 +15,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include #include +#define INTCA_BASE 0xe6980000 +#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */ +#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */ +#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */ +#define INTLVLB_OFFS 0x00000034 /* previous priority level */ + .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =INTFLGA + ldr \base, =INTCA_BASE .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] + /* The single INTFLGA read access below results in the following: + * + * 1. INTLVLB is updated with old priority value from INTLVLA + * 2. Highest priority interrupt is accepted + * 3. INTLVLA is updated to contain priority of accepted interrupt + * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA + */ + ldr \irqnr, [\base, #INTFLGA_OFFS] + + /* Restore INTLVLA with the value saved in INTLVLB. + * This is required to support interrupt priorities properly. + */ + ldrb \tmp, [\base, #INTLVLB_OFFS] + strb \tmp, [\base, #INTLVLA_OFFS] + + /* Handle invalid vector number case */ cmp \irqnr, #0 beq 1000f - /* intevt to irq number */ + + /* Convert vector to irq number, same as the evt2irq() macro */ lsr \irqnr, \irqnr, #0x5 subs \irqnr, \irqnr, #16 -- cgit v1.2.3-70-g09d2 From 8251544f9e28058e54c4f35b7cd13b0d191d7555 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 2 Jun 2010 12:55:36 +1200 Subject: at91: Fix uhpck clock rate in upll case The uhpck clock should be divided from the utmi clock, not its parent (main). This change is mostly cosmetic as the uhpck rate value is not used anywhere except for the debugfs clock output. Signed-off-by: Ryan Mallon Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 7525cee3983..9113da6845f 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz = utmi_clk.rate_hz; uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); } -- cgit v1.2.3-70-g09d2 From c20b4dd31820a551d0fb60bf27b99345905c2eb6 Mon Sep 17 00:00:00 2001 From: Christian Glindkamp Date: Thu, 9 Dec 2010 11:15:59 +0100 Subject: at91: Refactor Stamp9G20 and PControl G20 board file As PControl G20 is a carrier board for the Stamp9G20 SoM, some code can be shared. Therefore board-stamp9g20.c is refactored to allow reusing the SoM initialization and board-pcontrol-g20.c is modified to use it. Signed-off-by: Christian Glindkamp Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/Makefile | 2 +- arch/arm/mach-at91/board-pcontrol-g20.c | 98 +---------------------------- arch/arm/mach-at91/board-stamp9g20.c | 82 ++++++++++++------------ arch/arm/mach-at91/include/mach/stamp9g20.h | 7 +++ 4 files changed, 54 insertions(+), 135 deletions(-) create mode 100644 arch/arm/mach-at91/include/mach/stamp9g20.h (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 62d686f0b42..d13add71f72 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o +obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index bba5a560e02..feb65787c30 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -31,6 +31,7 @@ #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -38,11 +39,7 @@ static void __init pcontrol_g20_map_io(void) { - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */ - at91_register_uart(0, 0, 0); + stamp9g20_map_io(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void) /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ at91_register_uart(AT91SAM9260_ID_US4, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } @@ -66,38 +60,6 @@ static void __init init_irq(void) } -/* - * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB - */ -static struct atmel_nand_data __initdata nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, -}; - -/* - * Bus timings; unit = 7.57ns - */ -static struct sam9_smc_config __initdata nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .tdf_cycles = 1, } }; -static void __init add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &nand_smc_config); - at91_add_device_nand(&nand_data); -} - - static void __init add_device_pcontrol(void) { /* configure chip-select 4 (IO compatible to 8051 X4 ) */ @@ -155,23 +109,6 @@ static void __init add_device_pcontrol(void) } -/* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) -static struct mci_platform_data __initdata mmc_data = { - .slot[0] = { - .bus_width = 4, - }, -}; -#else -static struct at91_mmc_data __initdata mmc_data = { - .wire4 = 1, -}; -#endif - - /* * USB Host port */ @@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = { }; -/* - * Dallas 1-Wire DS2431 - */ -static struct w1_gpio_platform_data w1_gpio_pdata = { - .pin = AT91_PIN_PA29, - .is_open_drain = 1, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -static void add_wire1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - - static void __init pcontrol_g20_board_init(void) { - at91_add_device_serial(); - add_device_nand(); -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) - at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif + stamp9g20_board_init(); at91_add_device_usbh(&usbh_data); at91_add_device_eth(&macb_data); at91_add_device_i2c(pcontrol_g20_i2c_devices, ARRAY_SIZE(pcontrol_g20_i2c_devices)); - add_wire1(); add_device_pcontrol(); at91_add_device_spi(pcontrol_g20_spi_devices, ARRAY_SIZE(pcontrol_g20_spi_devices)); diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5206eef4a67..f8902b11896 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -static void __init portuxg20_map_io(void) +void __init stamp9g20_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void) /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init stamp9g20evb_map_io(void) +{ + stamp9g20_map_io(); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); +} + +static void __init portuxg20_map_io(void) +{ + stamp9g20_map_io(); + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR @@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void) /* USART5 on ttyS6. (Rx, Tx only) */ at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init stamp9g20_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static void __init init_irq(void) @@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = { .pullup_pin = 0, /* pull-up driven by UDC */ }; -static struct at91_udc_data __initdata stamp9g20_udc_data = { +static struct at91_udc_data __initdata stamp9g20evb_udc_data = { .vbus_pin = AT91_PIN_PA22, .pullup_pin = 0, /* pull-up driven by UDC */ }; @@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = { } }; -static struct gpio_led stamp9g20_leds[] = { +static struct gpio_led stamp9g20evb_leds[] = { { .name = "D8", .gpio = AT91_PIN_PB18, @@ -250,7 +248,7 @@ void add_w1(void) } -static void __init generic_board_init(void) +void __init stamp9g20_board_init(void) { /* Serial */ at91_add_device_serial(); @@ -262,34 +260,40 @@ static void __init generic_board_init(void) #else at91_add_device_mmc(0, &mmc_data); #endif - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); /* W1 */ add_w1(); } static void __init portuxg20_board_init(void) { - generic_board_init(); - /* SPI */ - at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ at91_add_device_udc(&portuxg20_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* SPI */ + at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); /* LEDs */ at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); } -static void __init stamp9g20_board_init(void) +static void __init stamp9g20evb_board_init(void) { - generic_board_init(); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ - at91_add_device_udc(&stamp9g20_udc_data); + at91_add_device_udc(&stamp9g20evb_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); /* LEDs */ - at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds)); + at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds)); } MACHINE_START(PORTUXG20, "taskit PortuxG20") @@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20_map_io, + .map_io = stamp9g20evb_map_io, .init_irq = init_irq, - .init_machine = stamp9g20_board_init, + .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h new file mode 100644 index 00000000000..6120f9c46d5 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -0,0 +1,7 @@ +#ifndef __MACH_STAMP9G20_H +#define __MACH_STAMP9G20_H + +void stamp9g20_map_io(void); +void stamp9g20_board_init(void); + +#endif -- cgit v1.2.3-70-g09d2 From 1ae1b5f053cf36bd0f913e83f3b136fec8152d4d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 18 Dec 2010 13:57:00 +0000 Subject: ARM: smp: avoid incrementing mm_users on CPU startup We should not be incrementing mm_users when we startup a secondary CPU - doing so results in mm_users incrementing by one each time we hotplug a CPU, which will eventually wrap, and will cause problems. Other architectures such as x86 do not increment mm_users, but only mm_count, so we follow that pattern. Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8c195959025..9066473c0eb 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -310,7 +310,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) * All kernel threads share the same mm context; grab a * reference and switch to it. */ - atomic_inc(&mm->mm_users); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); -- cgit v1.2.3-70-g09d2 From 39af22a79232373764904576f31572f1db76af10 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 15 Dec 2010 15:14:45 -0500 Subject: ARM: get rid of kmap_high_l1_vipt() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is no longer necessary to carry an ad hoc version of kmap_atomic() added in commit 7e5a69e83b "ARM: 6007/1: fix highmem with VIPT cache and DMA" to cope with reentrancy. In fact, it is now actively wrong to rely on fixed kmap type indices (namely KM_L1_CACHE) as kmap_atomic() totally ignores them now and a concurrent instance of it may reuse any slot for any purpose. Signed-off-by: Nicolas Pitre --- arch/arm/include/asm/highmem.h | 3 -- arch/arm/mm/dma-mapping.c | 7 ++-- arch/arm/mm/flush.c | 7 ++-- arch/arm/mm/highmem.c | 87 ------------------------------------------ 4 files changed, 8 insertions(+), 96 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 1fc684e70ab..7080e2c8fa6 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -25,9 +25,6 @@ extern void *kmap_high(struct page *page); extern void *kmap_high_get(struct page *page); extern void kunmap_high(struct page *page); -extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte); -extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte); - /* * The following functions are already defined by * when CONFIG_HIGHMEM is not set. diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ac6a36142fc..809f1bf9fa2 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -480,10 +481,10 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, op(vaddr, len, dir); kunmap_high(page); } else if (cache_is_vipt()) { - pte_t saved_pte; - vaddr = kmap_high_l1_vipt(page, &saved_pte); + /* unmapped pages might still be cached */ + vaddr = kmap_atomic(page); op(vaddr + offset, len, dir); - kunmap_high_l1_vipt(page, saved_pte); + kunmap_atomic(vaddr); } } else { vaddr = page_address(page) + offset; diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 391ffae7509..c29f2839f1d 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -180,10 +181,10 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page) __cpuc_flush_dcache_area(addr, PAGE_SIZE); kunmap_high(page); } else if (cache_is_vipt()) { - pte_t saved_pte; - addr = kmap_high_l1_vipt(page, &saved_pte); + /* unmapped pages might still be cached */ + addr = kmap_atomic(page); __cpuc_flush_dcache_area(addr, PAGE_SIZE); - kunmap_high_l1_vipt(page, saved_pte); + kunmap_atomic(addr); } } diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index c435fd9e1da..807c0573abb 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -140,90 +140,3 @@ struct page *kmap_atomic_to_page(const void *ptr) pte = TOP_PTE(vaddr); return pte_page(*pte); } - -#ifdef CONFIG_CPU_CACHE_VIPT - -#include - -/* - * The VIVT cache of a highmem page is always flushed before the page - * is unmapped. Hence unmapped highmem pages need no cache maintenance - * in that case. - * - * However unmapped pages may still be cached with a VIPT cache, and - * it is not possible to perform cache maintenance on them using physical - * addresses unfortunately. So we have no choice but to set up a temporary - * virtual mapping for that purpose. - * - * Yet this VIPT cache maintenance may be triggered from DMA support - * functions which are possibly called from interrupt context. As we don't - * want to keep interrupt disabled all the time when such maintenance is - * taking place, we therefore allow for some reentrancy by preserving and - * restoring the previous fixmap entry before the interrupted context is - * resumed. If the reentrancy depth is 0 then there is no need to restore - * the previous fixmap, and leaving the current one in place allow it to - * be reused the next time without a TLB flush (common with DMA). - */ - -static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth); - -void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte) -{ - unsigned int idx, cpu; - int *depth; - unsigned long vaddr, flags; - pte_t pte, *ptep; - - if (!in_interrupt()) - preempt_disable(); - - cpu = smp_processor_id(); - depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); - - idx = KM_L1_CACHE + KM_TYPE_NR * cpu; - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - ptep = TOP_PTE(vaddr); - pte = mk_pte(page, kmap_prot); - - raw_local_irq_save(flags); - (*depth)++; - if (pte_val(*ptep) == pte_val(pte)) { - *saved_pte = pte; - } else { - *saved_pte = *ptep; - set_pte_ext(ptep, pte, 0); - local_flush_tlb_kernel_page(vaddr); - } - raw_local_irq_restore(flags); - - return (void *)vaddr; -} - -void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte) -{ - unsigned int idx, cpu = smp_processor_id(); - int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu); - unsigned long vaddr, flags; - pte_t pte, *ptep; - - idx = KM_L1_CACHE + KM_TYPE_NR * cpu; - vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - ptep = TOP_PTE(vaddr); - pte = mk_pte(page, kmap_prot); - - BUG_ON(pte_val(*ptep) != pte_val(pte)); - BUG_ON(*depth <= 0); - - raw_local_irq_save(flags); - (*depth)--; - if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) { - set_pte_ext(ptep, saved_pte, 0); - local_flush_tlb_kernel_page(vaddr); - } - raw_local_irq_restore(flags); - - if (!in_interrupt()) - preempt_enable(); -} - -#endif /* CONFIG_CPU_CACHE_VIPT */ -- cgit v1.2.3-70-g09d2 From 25cbe45440ea89a3b0f6f7ed326d3d476d53068b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 15 Dec 2010 23:29:04 -0500 Subject: ARM: fix cache-xsc3l2 after stack based kmap_atomic() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here, and we even don't have to disable IRQs anymore (highmem case). While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform if at all anyway). Signed-off-by: Nicolas Pitre --- arch/arm/mm/cache-xsc3l2.c | 57 +++++++++++++++++----------------------------- 1 file changed, 21 insertions(+), 36 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c index c3154928bcc..5a32020471e 100644 --- a/arch/arm/mm/cache-xsc3l2.c +++ b/arch/arm/mm/cache-xsc3l2.c @@ -17,14 +17,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include +#include #include #include #include -#include -#include -#include -#include -#include "mm.h" #define CR_L2 (1 << 26) @@ -71,16 +67,15 @@ static inline void xsc3_l2_inv_all(void) dsb(); } +static inline void l2_unmap_va(unsigned long va) +{ #ifdef CONFIG_HIGHMEM -#define l2_map_save_flags(x) raw_local_save_flags(x) -#define l2_map_restore_flags(x) raw_local_irq_restore(x) -#else -#define l2_map_save_flags(x) ((x) = 0) -#define l2_map_restore_flags(x) ((void)(x)) + if (va != -1) + kunmap_atomic((void *)va); #endif +} -static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, - unsigned long flags) +static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va) { #ifdef CONFIG_HIGHMEM unsigned long va = prev_va & PAGE_MASK; @@ -89,17 +84,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, /* * Switching to a new page. Because cache ops are * using virtual addresses only, we must put a mapping - * in place for it. We also enable interrupts for a - * short while and disable them again to protect this - * mapping. + * in place for it. */ - unsigned long idx; - raw_local_irq_restore(flags); - idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); - va = __fix_to_virt(FIX_KMAP_BEGIN + idx); - raw_local_irq_restore(flags | PSR_I_BIT); - set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0); - local_flush_tlb_kernel_page(va); + l2_unmap_va(prev_va); + va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT); } return va + (pa_offset >> (32 - PAGE_SHIFT)); #else @@ -109,7 +97,7 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va, static void xsc3_l2_inv_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; if (start == 0 && end == -1ul) { xsc3_l2_inv_all(); @@ -117,13 +105,12 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) } vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); /* * Clean and invalidate partial first cache line. */ if (start & (CACHE_LINE_SIZE - 1)) { - vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags); + vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); start = (start | (CACHE_LINE_SIZE - 1)) + 1; @@ -133,7 +120,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) * Invalidate all full cache lines between 'start' and 'end'. */ while (start < (end & ~(CACHE_LINE_SIZE - 1))) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_inv_mva(vaddr); start += CACHE_LINE_SIZE; } @@ -142,31 +129,30 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end) * Clean and invalidate partial last cache line. */ if (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } static void xsc3_l2_clean_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); start += CACHE_LINE_SIZE; } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } @@ -193,7 +179,7 @@ static inline void xsc3_l2_flush_all(void) static void xsc3_l2_flush_range(unsigned long start, unsigned long end) { - unsigned long vaddr, flags; + unsigned long vaddr; if (start == 0 && end == -1ul) { xsc3_l2_flush_all(); @@ -201,17 +187,16 @@ static void xsc3_l2_flush_range(unsigned long start, unsigned long end) } vaddr = -1; /* to force the first mapping */ - l2_map_save_flags(flags); start &= ~(CACHE_LINE_SIZE - 1); while (start < end) { - vaddr = l2_map_va(start, vaddr, flags); + vaddr = l2_map_va(start, vaddr); xsc3_l2_clean_mva(vaddr); xsc3_l2_inv_mva(vaddr); start += CACHE_LINE_SIZE; } - l2_map_restore_flags(flags); + l2_unmap_va(vaddr); dsb(); } -- cgit v1.2.3-70-g09d2 From 6d3e6d3640052cac958d61c44597cc216f6ee09f Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 16 Dec 2010 14:56:34 -0500 Subject: ARM: fix cache-feroceon-l2 after stack based kmap_atomic() Since commit 3e4d3af501 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here. While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform anyway) but that should be reconsidered when/if someone cares enough to do some measurements. Signed-off-by: Nicolas Pitre --- arch/arm/mm/cache-feroceon-l2.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 6e77c042d8e..e0b0e7a4ec6 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -13,13 +13,9 @@ */ #include +#include #include -#include -#include -#include -#include #include -#include "mm.h" /* * Low-level cache maintenance operations. @@ -39,27 +35,30 @@ * between which we don't want to be preempted. */ -static inline unsigned long l2_start_va(unsigned long paddr) +static inline unsigned long l2_get_va(unsigned long paddr) { #ifdef CONFIG_HIGHMEM /* - * Let's do our own fixmap stuff in a minimal way here. * Because range ops can't be done on physical addresses, * we simply install a virtual mapping for it only for the * TLB lookup to occur, hence no need to flush the untouched - * memory mapping. This is protected with the disabling of - * interrupts by the caller. + * memory mapping afterwards (note: a cache flush may happen + * in some circumstances depending on the path taken in kunmap_atomic). */ - unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id(); - unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0); - local_flush_tlb_kernel_page(vaddr); - return vaddr + (paddr & ~PAGE_MASK); + void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT); + return (unsigned long)vaddr + (paddr & ~PAGE_MASK); #else return __phys_to_virt(paddr); #endif } +static inline void l2_put_va(unsigned long vaddr) +{ +#ifdef CONFIG_HIGHMEM + kunmap_atomic((void *)vaddr); +#endif +} + static inline void l2_clean_pa(unsigned long addr) { __asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr)); @@ -76,13 +75,14 @@ static inline void l2_clean_pa_range(unsigned long start, unsigned long end) */ BUG_ON((start ^ end) >> PAGE_SHIFT); - raw_local_irq_save(flags); - va_start = l2_start_va(start); + va_start = l2_get_va(start); va_end = va_start + (end - start); + raw_local_irq_save(flags); __asm__("mcr p15, 1, %0, c15, c9, 4\n\t" "mcr p15, 1, %1, c15, c9, 5" : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); + l2_put_va(va_start); } static inline void l2_clean_inv_pa(unsigned long addr) @@ -106,13 +106,14 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end) */ BUG_ON((start ^ end) >> PAGE_SHIFT); - raw_local_irq_save(flags); - va_start = l2_start_va(start); + va_start = l2_get_va(start); va_end = va_start + (end - start); + raw_local_irq_save(flags); __asm__("mcr p15, 1, %0, c15, c11, 4\n\t" "mcr p15, 1, %1, c15, c11, 5" : : "r" (va_start), "r" (va_end)); raw_local_irq_restore(flags); + l2_put_va(va_start); } static inline void l2_inv_all(void) -- cgit v1.2.3-70-g09d2 From a2255ff45143001fecbc5e5a4b58fcb999d393ae Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Thu, 25 Nov 2010 12:11:51 +0200 Subject: mmc: at91_mci: fix multiblock SDIO transfers The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: Yauhen Kharuzhy Cc: Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Chris Ball --- arch/arm/mach-at91/include/mach/at91_mci.h | 2 ++ drivers/mmc/host/at91_mci.c | 13 +++++++++---- 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 57f8ee15494..27ac6f550fe 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -74,6 +74,8 @@ #define AT91_MCI_TRTYP_BLOCK (0 << 19) #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) +#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) #define AT91_MCI_BLKR 0x18 /* Block Register */ #define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 591ab540b40..d3e6a962f42 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -69,6 +69,7 @@ #include #include +#include #include #include @@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command else if (data->flags & MMC_DATA_WRITE) cmdr |= AT91_MCI_TRCMD_START; - if (data->flags & MMC_DATA_STREAM) - cmdr |= AT91_MCI_TRTYP_STREAM; - if (data->blocks > 1) - cmdr |= AT91_MCI_TRTYP_MULTIPLE; + if (cmd->opcode == SD_IO_RW_EXTENDED) { + cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK; + } else { + if (data->flags & MMC_DATA_STREAM) + cmdr |= AT91_MCI_TRTYP_STREAM; + if (data->blocks > 1) + cmdr |= AT91_MCI_TRTYP_MULTIPLE; + } } else { block_length = 0; -- cgit v1.2.3-70-g09d2 From 537de3a67c0c86586eacffde40673b727242dc3a Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 22 Dec 2010 04:52:05 +0100 Subject: ARM: 6536/1: Add missing SZ_{32,64,128} ... and also remove misleading comment stating that this header is auto-generated. Signed-off-by: Stephen Warren Acked-by: Uwe Kleine-Knig Signed-off-by: Russell King --- arch/arm/include/asm/sizes.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index 4fc1565e4f9..316bb2b2be3 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -13,9 +13,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ /* Size definitions * Copyright (C) ARM Limited 1998. All rights reserved. */ @@ -25,6 +22,9 @@ /* handy sizes */ #define SZ_16 0x00000010 +#define SZ_32 0x00000020 +#define SZ_64 0x00000040 +#define SZ_128 0x00000080 #define SZ_256 0x00000100 #define SZ_512 0x00000200 -- cgit v1.2.3-70-g09d2 From d13e5edd7284bedcf5952e1b6490e39ad843cb91 Mon Sep 17 00:00:00 2001 From: Todd Android Poynor Date: Thu, 23 Dec 2010 01:52:44 +0100 Subject: ARM: 6540/1: Stop irqsoff trace on return to user If the irqsoff tracer is in use, stop tracing the interrupt disable interval when returning to userspace. Tracing userspace execution time as interrupts disabled time is not helpful for kernel performance analysis purposes. Only do so if the irqsoff tracer is enabled, to avoid overhead for lockdep, which doesn't care. Signed-off-by: Todd Poynor Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 8bfa98757cd..80bf8cd88d7 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -29,6 +29,9 @@ ret_fast_syscall: ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne fast_work_pending +#if defined(CONFIG_IRQSOFF_TRACER) + asm_trace_hardirqs_on +#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr @@ -65,6 +68,9 @@ ret_slow_syscall: tst r1, #_TIF_WORK_MASK bne work_pending no_work_pending: +#if defined(CONFIG_IRQSOFF_TRACER) + asm_trace_hardirqs_on +#endif /* perform architecture specific actions before user return */ arch_ret_to_user r1, lr -- cgit v1.2.3-70-g09d2 From 88a58101608f1416f4c1ec81d88faed258a34b3d Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Mon, 27 Dec 2010 22:59:57 +0100 Subject: ARM: fix IXP4xx build failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arm: export dma_set_coherent_mask While a regression was fixed with commit 710224fa2750cf (arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a new one was introduced as dma_set_coherent_mask wasn't exported for modules. This patch takes care for this issue. Signed-off-by: Imre Kaloz Signed-off-by: Krzysztof Hałasa Signed-off-by: Linus Torvalds --- arch/arm/common/it8152.c | 1 + arch/arm/mach-ixp4xx/common-pci.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 1bec96e8519..42ff90b46df 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(nr, &it8152_ops, sys); } +EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 24498a932ba..a54b3db8036 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); - +EXPORT_SYMBOL(dma_set_coherent_mask); -- cgit v1.2.3-70-g09d2 From 7c0ab43e6ab09d72dc8dbac2521b2f819ccc4026 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 3 Jan 2011 02:26:53 +0100 Subject: ARM: 6605/1: Add missing include "asm/memory.h" This patch fixes below build error by adding the missing asm/memory.h, which is needed for arch_is_coherent(). $ make pxa3xx_defconfig; make CC init/do_mounts_rd.o In file included from include/linux/list_bl.h:5, from include/linux/rculist_bl.h:7, from include/linux/dcache.h:7, from include/linux/fs.h:381, from init/do_mounts_rd.c:3: include/linux/bit_spinlock.h: In function 'bit_spin_unlock': include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent' make[1]: *** [init/do_mounts_rd.o] Error 1 make: *** [init] Error 2 Signed-off-by: Axel Lin Acked-by: Peter Huewe Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 1120f18a6b1..80025948b8a 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -150,6 +150,7 @@ extern unsigned int user_debug; #define rmb() dmb() #define wmb() mb() #else +#include #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -- cgit v1.2.3-70-g09d2 From 82427de2c7c39ee7bcaa4cb0260b4e9b9ab19eb8 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 15 Dec 2010 07:20:16 +0800 Subject: ARM: pxa: PXA_ESERIES depends on FB_W100. As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index dd235ecc9d6..c93e73d54dd 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -540,6 +540,7 @@ config MACH_ICONTROL config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x + select FB_W100 config MACH_E330 bool "Toshiba e330" -- cgit v1.2.3-70-g09d2 From 823a2df258627b80df2e75056b850424a8eb5fed Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Wed, 29 Dec 2010 09:06:26 +0200 Subject: ARM: it8152: add IT8152_LAST_IRQ definition to fix build error The commit 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which caused the following build error: CC arch/arm/common/it8152.o arch/arm/common/it8152.c: In function 'it8152_init_irq': arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function) arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once arch/arm/common/it8152.c:86: error: for each function it appears in.) make[2]: *** [arch/arm/common/it8152.o] Error 1 Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c fixes the build. Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao --- arch/arm/include/asm/hardware/it8152.h | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm') diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 21fa272301f..b2f95c72287 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -76,6 +76,7 @@ extern unsigned long it8152_base_address; IT8152_PD_IRQ(0) Audio controller (ACR) */ #define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) +#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 -- cgit v1.2.3-70-g09d2 From 24c78557741395e038e83f25367cf2bfd7f582b8 Mon Sep 17 00:00:00 2001 From: "Aric D. Blumer" Date: Wed, 29 Dec 2010 11:18:29 -0500 Subject: ARM: pxa: fix page table corruption on resume Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: Matt Reimer Signed-off-by: Eric Miao --- arch/arm/mach-pxa/sleep.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 52c30b01a67..ae008110db4 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -353,8 +353,8 @@ resume_turn_on_mmu: @ Let us ensure we jump to resume_after_mmu only when the mcr above @ actually took effect. They call it the "cpwait" operation. - mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15 - sub pc, r2, r1, lsr #32 @ jump to virtual addr + mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15 + sub pc, r2, r0, lsr #32 @ jump to virtual addr nop nop nop -- cgit v1.2.3-70-g09d2