From 248b3b3d841b01d0a5a55b746fc7e5e9edbe65e6 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Wed, 4 Jul 2012 03:40:59 -0600
Subject: ARM: OMAP2+: hwmod: Add new sysc_type3 into omap_hwmod required for
 am33xx

In case of AM33xx family of devices (like cpsw) have different sysc
bit field offsets defined,

sysc_type3:
|  3     2  |  1    0  |
| STDBYMODE | IDLEMODE |

So introduce new sysc_type3 in omap_hwmod common data.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod_common_data.c |  9 +++++++++
 arch/arm/plat-omap/include/plat/omap_hwmod.h | 10 ++++++++++
 2 files changed, 19 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 51e5418899f..6dd922ef80c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -49,6 +49,15 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
 };
 
+/**
+ * struct omap_hwmod_sysc_type3 - TYPE3 sysconfig scheme.
+ * Used by some IPs on AM33xx
+ */
+struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3 = {
+	.midle_shift	= SYSC_TYPE3_MIDLEMODE_SHIFT,
+	.sidle_shift	= SYSC_TYPE3_SIDLEMODE_SHIFT,
+};
+
 struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
 	.manager_count		= 2,
 	.has_framedonetv_irq	= 0
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index c835b7194ff..2c171038696 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -41,6 +41,7 @@ struct omap_device;
 
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
 extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
 
 /*
  * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@@ -70,6 +71,15 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define SYSC_TYPE2_MIDLEMODE_SHIFT	4
 #define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
 
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT	0
+#define SYSC_TYPE3_SIDLEMODE_MASK	(0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT	2
+#define SYSC_TYPE3_MIDLEMODE_MASK	(0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
+
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
 #define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-- 
cgit v1.2.3-70-g09d2


From 768c69f5e9227a855a7bbb490b18628133fa891a Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Wed, 4 Jul 2012 03:41:03 -0600
Subject: ARM: OMAP3/4: omap_hwmod: Add rstst_offs field to struct
 omap_hwmod_omap4_prcm

In case of AM33XX device, XXX_RSTST register offset is not
consistent across PRM modules/instances,

PRM_XXX            RSTST
=========================
PRM_PER_MOD:       0x04
PRM_WKUP_MOD:      0x0C
PRM_MPU_MOD:       NA
PRM_DEVICE_MOD:    0x08

This means, we need to pass on XXX_RSTST register offset
information through omap_hwmod data, similar to XXX_RSTCTRL.

Currently, this field is only applicable and used for AM33XX
devices.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 2c171038696..7cb8d7dddcc 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -384,11 +384,13 @@ struct omap_hwmod_omap2_prcm {
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
  * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	u16		clkctrl_offs;
 	u16		rstctrl_offs;
+	u16		rstst_offs;
 	u16		context_offs;
 	u8		submodule_wkdep_bit;
 	u8		modulemode;
-- 
cgit v1.2.3-70-g09d2


From 65aa94b204dcecca01521e2a4a57e44892632b47 Mon Sep 17 00:00:00 2001
From: Jon Hunter <jon-hunter@ti.com>
Date: Wed, 4 Jul 2012 03:45:53 -0600
Subject: ARM: OMAP4: clockdomain/CM code: Update supported transition modes

For OMAP3+ devices, the clock domains (CLKDMs) support one or more of the
following transition modes ...

NO_SLEEP (0x0) - A clock domain sleep transition is never initiated,
		 irrespective of the hardware conditions.
SW_SLEEP (0x1) - A software-forced sleep transition. The transition is initiated
		 when the associated hardware conditions are satisfied
SW_WKUP  (0x2) - A software-forced clock domain wake-up transition is initiated,
		 irrespective of the hardware conditions.
HW_AUTO  (0x3) - Hardware-controlled automatic sleep and wake-up transition is
		 initiated by the PRCM module when the associated hardware
		 conditions are satisfied.

For OMAP4 devices, SW_SLEEP is equivalent to HW_AUTO and NO_SLEEP is equivalent
to SW_WKUP. The only difference between HW_AUTO and SW_SLEEP for OMAP4 devices
is that the PRM_IRQSTATUS_MPU.TRANSITION_ST interrupt status is set in case of
SW_SLEEP transition, and not set in case of HW_AUTO transition.

For OMAP4 devices, all CLKDMs support HW_AUTO and therefore we can place the
CLKDMs in the HW_AUTO state instead of the SW_SLEEP mode. Hence, we do not
need to use the SW_SLEEP mode. With regard to NO_SLEEP and SW_WKUP it is
preferred to use SW_WKUP mode if the CLKDM supports it and so use this mode
instead of NO_SLEEP where possible.

For a software perspective the above 4 modes are represented by the following
flags to indicate what modes are supported by each of the CLKDMs.

CLKDM_CAN_DISABLE_AUTO	--> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO	--> HW_AUTO
CLKDM_CAN_FORCE_SLEEP	--> SW_SLEEP
CLKDM_CAN_FORCE_WAKEUP	--> SW_WKUP

By eliminating the SW_SLEEP mode the the mapping of the flags for OMAP4 devices
can becomes ...

CLKDM_CAN_DISABLE_AUTO	--> NO_SLEEP
CLKDM_CAN_ENABLE_AUTO	--> HW_AUTO
CLKDM_CAN_FORCE_SLEEP	--> HW_AUTO
CLKDM_CAN_FORCE_WAKEUP	--> SW_WKUP

Cc: Ming Lei <ming.lei@canonical.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/clockdomain44xx.c | 10 +++++++---
 arch/arm/mach-omap2/cminst44xx.c      | 14 --------------
 2 files changed, 7 insertions(+), 17 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c
index 4f04dd11d65..762f2cc542c 100644
--- a/arch/arm/mach-omap2/clockdomain44xx.c
+++ b/arch/arm/mach-omap2/clockdomain44xx.c
@@ -70,7 +70,7 @@ static int omap4_clkdm_clear_all_wkup_sleep_deps(struct clockdomain *clkdm)
 
 static int omap4_clkdm_sleep(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+	omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
 					clkdm->cm_inst, clkdm->clkdm_offs);
 	return 0;
 }
@@ -90,8 +90,12 @@ static void omap4_clkdm_allow_idle(struct clockdomain *clkdm)
 
 static void omap4_clkdm_deny_idle(struct clockdomain *clkdm)
 {
-	omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
-					clkdm->cm_inst, clkdm->clkdm_offs);
+	if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+		omap4_clkdm_wakeup(clkdm);
+	else
+		omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+						 clkdm->cm_inst,
+						 clkdm->clkdm_offs);
 }
 
 static int omap4_clkdm_clk_enable(struct clockdomain *clkdm)
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
index 1a39945d9ff..1894015ff04 100644
--- a/arch/arm/mach-omap2/cminst44xx.c
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -234,20 +234,6 @@ void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
 	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
 }
 
-/**
- * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
- * @part: PRCM partition ID that the clockdomain registers exist in
- * @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
- *
- * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
- * No return value.
- */
-void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
-{
-	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
-}
-
 /**
  * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
  * @part: PRCM partition ID that the clockdomain registers exist in
-- 
cgit v1.2.3-70-g09d2


From d49cae924faeffe8fb6b50493ec1655731d8dbd0 Mon Sep 17 00:00:00 2001
From: Jon Hunter <jon-hunter@ti.com>
Date: Fri, 29 Jun 2012 16:04:52 -0500
Subject: ARM: OMAP2+: powerdomain code: Fix Wake-up power domain power status

The wake-up power domain is an alway-on power domain and so this power domain
does not have a power state status (PM_PWSTST_xxx) register that indicates the
current state. However, during the registering of the wake-up power domain the
state of the domain is queried by calling pwrdm_read_pwrst(). This actually
tries to read a register that does not exist and returns a value of 0 that
indicates that the current state is OFF. The OFF state count of the wake-up
power domain is then set to 1 and the current state to OFF. Both of which are
incorrect.

To fix this, if a power domain only supports the ON state, do not attempt to
read the power state status register and simply return ON as the current power
state.

This is based upon Tony's current linux-omap master branch.

Testing:
- Boot tested on OMAP4460 panda.
- Boot tested on OMAP3430 beagle and validated CORE RET still working (using
  Paul's 32k timer patch [1]).

[1] http://marc.info/?l=linux-omap&m=134000053229888&w=2

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[paul@pwsan.com: edited commit message slightly]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/powerdomain.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 96114901b93..2f963f702a0 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -526,7 +526,8 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
  *
  * Return the powerdomain @pwrdm's current power state.	Returns -EINVAL
  * if the powerdomain pointer is null or returns the current power state
- * upon success.
+ * upon success. Note that if the power domain only supports the ON state
+ * then just return ON as the current state.
  */
 int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
@@ -535,6 +536,9 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 	if (!pwrdm)
 		return -EINVAL;
 
+	if (pwrdm->pwrsts == PWRSTS_ON)
+		return PWRDM_POWER_ON;
+
 	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
 		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
 
-- 
cgit v1.2.3-70-g09d2


From f0d3d821db4ffa63de344347587429b940086e25 Mon Sep 17 00:00:00 2001
From: Sakari Ailus <sakari.ailus@iki.fi>
Date: Wed, 4 Jul 2012 04:54:13 -0600
Subject: ARM: OMAP3: control: add definition for CONTROL_CAMERA_PHY_CTRL

The register is used to configure the behaviour of the CSI-2 and CCP-2
receivers. This register is available only in OMAP3630.

The original patch was submitted by Vimarsh Zutshi.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Cc: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/control.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd045ce..c7aa930f9c4 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -182,6 +182,7 @@
 #define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
 #define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
 #define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+#define OMAP3630_CONTROL_CAMERA_PHY_CTRL	(OMAP2_CONTROL_GENERAL + 0x02f0)
 
 /* OMAP44xx control efuse offsets */
 #define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
-- 
cgit v1.2.3-70-g09d2


From 55ffe163c8b4e2aa0a083000e02ec26efd71ea63 Mon Sep 17 00:00:00 2001
From: Vikram Pandita <vikram.pandita@ti.com>
Date: Wed, 4 Jul 2012 05:00:44 -0600
Subject: ARM: OMAP3+: dpll: optimize noncore dpll locking logic

If the dpll is already locked, code can be optimized
to return much earlier than doing redundent set of lock mode
and wait on idlest.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Jon Hunter <jon-hunter@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Mike Turquette <mturquette@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/dpll3xxx.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index f0f10beeffe..c310dc0d40b 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -135,11 +135,20 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
  */
 static int _omap3_noncore_dpll_lock(struct clk *clk)
 {
+	const struct dpll_data *dd;
 	u8 ai;
-	int r;
+	u8 state = 1;
+	int r = 0;
 
 	pr_debug("clock: locking DPLL %s\n", clk->name);
 
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
+		goto done;
+
 	ai = omap3_dpll_autoidle_read(clk);
 
 	if (ai)
@@ -152,6 +161,7 @@ static int _omap3_noncore_dpll_lock(struct clk *clk)
 	if (ai)
 		omap3_dpll_allow_idle(clk);
 
+done:
 	return r;
 }
 
-- 
cgit v1.2.3-70-g09d2


From bed9d1bb4ed8c9bdaca77d31a2562c3a9dae43a7 Mon Sep 17 00:00:00 2001
From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Date: Wed, 4 Jul 2012 05:00:48 -0600
Subject: ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API

Add an API to get main clock name associated with a given @oh.
This will avoid the need to construct fclk names during early
initialization in order to get fclk handle using clk_get().

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c             | 15 +++++++++++++++
 arch/arm/plat-omap/include/plat/omap_hwmod.h |  2 ++
 2 files changed, 17 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 773193670ea..a89214ee469 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3401,3 +3401,18 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx)
 
 	return 0;
 }
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	return oh->main_clk;
+}
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index c835b7194ff..da22acd0ce7 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -629,6 +629,8 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
 
 int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
-- 
cgit v1.2.3-70-g09d2


From 3f4990f44a5dcf15a053a041c813fa73ffa75608 Mon Sep 17 00:00:00 2001
From: R Sricharan <r.sricharan@ti.com>
Date: Wed, 4 Jul 2012 05:04:00 -0600
Subject: ARM: OMAP2+: PRM/CM: Move the stubbed prm and cm functions to prcm.c
 file and make them __weak

Some prm and cm registers read/write and status functions
are built only for some custom OMAP2+ builds and are stubbed
in header files for other builds under ifdef statements.
But this results in adding new CONFIG_ARCH_OMAPXXX
checks when SOCs are added in the future. So move them
to a common place for OMAP2+ and make them 'weak' implementations.

This way no new ifdefs would be required in the future and also
cleans up the existing code.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
[paul@pwsan.com: unsplit quoted strings; moved PRM functions to
 mach-omap2/prm_common.c; resolved sparse warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/cminst44xx.h   | 25 ---------------
 arch/arm/mach-omap2/prcm.c         | 23 ++++++++++++++
 arch/arm/mach-omap2/prm2xxx_3xxx.h | 65 --------------------------------------
 arch/arm/mach-omap2/prm_common.c   | 62 ++++++++++++++++++++++++++++++++++++
 4 files changed, 85 insertions(+), 90 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
index a018a732787..d69fdefef98 100644
--- a/arch/arm/mach-omap2/cminst44xx.h
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -16,38 +16,13 @@ extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
 extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
-
 extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-
-# ifdef CONFIG_ARCH_OMAP4
 extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
 					 u16 clkctrl_offs);
-
 extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
 				       u16 clkctrl_offs);
 extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
 					u16 clkctrl_offs);
-
-# else
-
-static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
-					u16 clkctrl_offs)
-{
-	return 0;
-}
-
-static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
-				s16 cdoffs, u16 clkctrl_offs)
-{
-}
-
-static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
-				 u16 clkctrl_offs)
-{
-}
-
-# endif
-
 /*
  * In an ideal world, we would not export these low-level functions,
  * but this will probably take some time to fix properly
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 480f40a5ee4..28cbfb2b573 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -35,6 +35,7 @@
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
 #include "prminst44xx.h"
+#include "cminst44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
@@ -164,3 +165,25 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		omap_cm_base_init();
 	}
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+int __weak omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
+					u16 clkctrl_offs)
+{
+	return 0;
+}
+
+void __weak omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+				s16 cdoffs, u16 clkctrl_offs)
+{
+}
+
+void __weak omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
+				 u16 clkctrl_offs)
+{
+}
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
index 70ac2a19dc5..f7bb57fff41 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -228,68 +228,6 @@
 
 
 #ifndef __ASSEMBLER__
-/*
- * Stub omap2xxx/omap3xxx functions so that common files
- * continue to build when custom builds are used
- */
-#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) ||	\
-					defined(CONFIG_ARCH_OMAP3))
-static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-}
-static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
-		s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
-						u8 st_shift)
-{
-	WARN(1, "prm: omap2xxx/omap3xxx specific function and "
-		"not suppose to be used on omap4\n");
-	return 0;
-}
-#else
 /* Power/reset management domain register get/set */
 extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
 extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
@@ -320,9 +258,6 @@ extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-#endif	/* CONFIG_ARCH_OMAP4 */
-
 #endif
 
 /*
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index dfe00ddb5c6..663ade3b2f4 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -319,3 +319,65 @@ err:
 	omap_prcm_irq_cleanup();
 	return -ENOMEM;
 }
+
+/*
+ * Stubbed functions so that common files continue to build when
+ * custom builds are used
+ * XXX These are temporary and should be removed at the earliest possible
+ * opportunity
+ */
+u32 __weak omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+void __weak omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+}
+
+u32 __weak omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits,
+		s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+u32 __weak omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
+int __weak omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift,
+						u8 st_shift)
+{
+	WARN(1, "prm: omap2xxx/omap3xxx specific function called on non-omap2xxx/3xxx\n");
+	return 0;
+}
+
-- 
cgit v1.2.3-70-g09d2


From 6668546f3bb4cc0dde75ac1ef1d436b67e4ef638 Mon Sep 17 00:00:00 2001
From: Kishon Vijay Abraham I <kishon@ti.com>
Date: Wed, 4 Jul 2012 05:09:21 -0600
Subject: ARM: OMAP2+: hwmod code: add support to set dmadisable in hwmod
 framework

The DMADISABLE bit is a semi-automatic bit present in sysconfig register
of some modules. When the DMA must perform read/write accesses, the
DMADISABLE bit is cleared by the hardware. But when the DMA must stop for power
management, software must set the DMADISABLE bit back to 1.

In cases where the ROMCODE/BOOTLOADER uses dma, the hardware clears the
DMADISABLE bit (but the romcode/bootloader might not set it back to 1).
In order for the kernel to start in a clean state, it is
necessary for the kernel to set DMADISABLE bit back to 1 (irrespective
of whether it's been set to 1 in romcode or bootloader).

During _reset of the (hwmod)device, the DMADISABLE bit is set so that it
does not prevent idling of the system. (NOTE: having DMADISABLE to 0,
prevents the system to idle)

DMADISABLE bit is present in usbotgss module of omap5.

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[paul@pwsan.com: updated to apply; fixed checkpatch warnings]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/omap_hwmod.c             | 61 +++++++++++++++++++++++++---
 arch/arm/mach-omap2/omap_hwmod_common_data.c |  1 +
 arch/arm/plat-omap/include/plat/omap_hwmod.h |  5 +++
 3 files changed, 62 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index a89214ee469..98cde62c0ca 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -387,6 +387,49 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
+ * @oh: struct omap_hwmod *
+ *
+ * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
+ * of some modules. When the DMA must perform read/write accesses, the
+ * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
+ * for power management, software must set the DMADISABLE bit back to 1.
+ *
+ * Set the DMADISABLE bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_dmadisable(struct omap_hwmod *oh)
+{
+	u32 v;
+	u32 dmadisable_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
+		return -EINVAL;
+	}
+
+	/* clocks must be on for this operation */
+	if (oh->_state != _HWMOD_STATE_ENABLED) {
+		pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
+		return -EINVAL;
+	}
+
+	pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
+
+	v = oh->_sysc_cache;
+	dmadisable_mask =
+		(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
+	v |= dmadisable_mask;
+	_write_sysconfig(v, oh);
+
+	return 0;
+}
+
 /**
  * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
  * @oh: struct omap_hwmod *
@@ -1698,11 +1741,17 @@ dis_opt_clks:
  * therefore have no OCP header registers to access.  Others (like the
  * IVA) have idiosyncratic reset sequences.  So for these relatively
  * rare cases, custom reset code can be supplied in the struct
- * omap_hwmod_class .reset function pointer.  Passes along the return
- * value from either _ocp_softreset() or the custom reset function -
- * these must return -EINVAL if the hwmod cannot be reset this way or
- * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
- * not reset in time, or 0 upon success.
+ * omap_hwmod_class .reset function pointer.
+ *
+ * _set_dmadisable() is called to set the DMADISABLE bit so that it
+ * does not prevent idling of the system. This is necessary for cases
+ * where ROMCODE/BOOTLOADER uses dma and transfers control to the
+ * kernel without disabling dma.
+ *
+ * Passes along the return value from either _ocp_softreset() or the
+ * custom reset function - these must return -EINVAL if the hwmod
+ * cannot be reset this way or if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
  */
 static int _reset(struct omap_hwmod *oh)
 {
@@ -1724,6 +1773,8 @@ static int _reset(struct omap_hwmod *oh)
 		}
 	}
 
+	_set_dmadisable(oh);
+
 	/*
 	 * OCP_SYSCONFIG bits need to be reprogrammed after a
 	 * softreset.  The _enable() function should be split to avoid
diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c
index 51e5418899f..aff61385291 100644
--- a/arch/arm/mach-omap2/omap_hwmod_common_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c
@@ -47,6 +47,7 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
 	.midle_shift	= SYSC_TYPE2_MIDLEMODE_SHIFT,
 	.sidle_shift	= SYSC_TYPE2_SIDLEMODE_SHIFT,
 	.srst_shift	= SYSC_TYPE2_SOFTRESET_SHIFT,
+	.dmadisable_shift = SYSC_TYPE2_DMADISABLE_SHIFT,
 };
 
 struct omap_dss_dispc_dev_attr omap2_3_dss_dispc_dev_attr = {
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index da22acd0ce7..27455ed0a2a 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -69,6 +69,8 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define SYSC_TYPE2_SIDLEMODE_MASK	(0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
 #define SYSC_TYPE2_MIDLEMODE_SHIFT	4
 #define SYSC_TYPE2_MIDLEMODE_MASK	(0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT	16
+#define SYSC_TYPE2_DMADISABLE_MASK	(0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -283,6 +285,7 @@ struct omap_hwmod_ocp_if {
 #define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 #define SYSC_HAS_RESET_STATUS	(1 << 9)
+#define SYSC_HAS_DMADISABLE	(1 << 10)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -298,6 +301,7 @@ struct omap_hwmod_ocp_if {
  * @enwkup_shift: Offset of the enawakeup bit
  * @srst_shift: Offset of the softreset bit
  * @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
  */
 struct omap_hwmod_sysc_fields {
 	u8 midle_shift;
@@ -306,6 +310,7 @@ struct omap_hwmod_sysc_fields {
 	u8 enwkup_shift;
 	u8 srst_shift;
 	u8 autoidle_shift;
+	u8 dmadisable_shift;
 };
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 74dd9ec627582bfd4477f01ceeaaa3f54e3748b8 Mon Sep 17 00:00:00 2001
From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Date: Fri, 20 Apr 2012 18:09:20 +0530
Subject: ARM: OMAP: dmtimer: use devm_ API and do some cleanup in probe()

Replace the regular kzalloc and ioremap with the devm_ equivalent
to simplify error handling. We don't need kree() any more in
omap_dm_timer_remove().

Also added *dev* pointer to reference pdev->dev which makes the
usage shorter in code.

Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/dmtimer.c | 53 ++++++++++++++------------------------------
 1 file changed, 17 insertions(+), 36 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 54ed4e6e429..626ad8cad7a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -37,7 +37,7 @@
 
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 
@@ -689,49 +689,39 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
  */
 static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 {
-	int ret;
 	unsigned long flags;
 	struct omap_dm_timer *timer;
-	struct resource *mem, *irq, *ioarea;
+	struct resource *mem, *irq;
+	struct device *dev = &pdev->dev;
 	struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
 
 	if (!pdata) {
-		dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+		dev_err(dev, "%s: no platform data.\n", __func__);
 		return -ENODEV;
 	}
 
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (unlikely(!irq)) {
-		dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+		dev_err(dev, "%s: no IRQ resource.\n", __func__);
 		return -ENODEV;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (unlikely(!mem)) {
-		dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+		dev_err(dev, "%s: no memory resource.\n", __func__);
 		return -ENODEV;
 	}
 
-	ioarea = request_mem_region(mem->start, resource_size(mem),
-			pdev->name);
-	if (!ioarea) {
-		dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
-		return -EBUSY;
-	}
-
-	timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+	timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
 	if (!timer) {
-		dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_free_ioregion;
+		dev_err(dev, "%s: memory alloc failed!\n", __func__);
+		return  -ENOMEM;
 	}
 
-	timer->io_base = ioremap(mem->start, resource_size(mem));
+	timer->io_base = devm_request_and_ioremap(dev, mem);
 	if (!timer->io_base) {
-		dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
-		ret = -ENOMEM;
-		goto err_free_mem;
+		dev_err(dev, "%s: region already claimed.\n", __func__);
+		return -ENOMEM;
 	}
 
 	timer->id = pdev->id;
@@ -742,14 +732,14 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 
 	/* Skip pm_runtime_enable for OMAP1 */
 	if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
-		pm_runtime_enable(&pdev->dev);
-		pm_runtime_irq_safe(&pdev->dev);
+		pm_runtime_enable(dev);
+		pm_runtime_irq_safe(dev);
 	}
 
 	if (!timer->reserved) {
-		pm_runtime_get_sync(&pdev->dev);
+		pm_runtime_get_sync(dev);
 		__omap_dm_timer_init_regs(timer);
-		pm_runtime_put(&pdev->dev);
+		pm_runtime_put(dev);
 	}
 
 	/* add the timer element to the list */
@@ -757,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 	list_add_tail(&timer->node, &omap_timer_list);
 	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
-	dev_dbg(&pdev->dev, "Device Probed.\n");
+	dev_dbg(dev, "Device Probed.\n");
 
 	return 0;
-
-err_free_mem:
-	kfree(timer);
-
-err_free_ioregion:
-	release_mem_region(mem->start, resource_size(mem));
-
-	return ret;
 }
 
 /**
@@ -788,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
 	list_for_each_entry(timer, &omap_timer_list, node)
 		if (timer->pdev->id == pdev->id) {
 			list_del(&timer->node);
-			kfree(timer);
 			ret = 0;
 			break;
 		}
-- 
cgit v1.2.3-70-g09d2


From 576d5e3a340a8a4411d6260b2dabd4223cc1c3a3 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 5 Jul 2012 08:05:14 -0700
Subject: ARM: OMAP2+: All OMAP2PLUS uses omap-device.o target so add one entry

All OMAP2PLUS based devices, builds omap-device.o target;
so just add one entry so that there is no need to patch this file
for any future OMAP2+ devices.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/Makefile | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 6d87532871c..961bf859bc0 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -10,9 +10,7 @@ obj-n :=
 obj-  :=
 
 # omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
 
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
-- 
cgit v1.2.3-70-g09d2


From 353cec46d50a38e412112e23f9542c3d6e51a308 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 5 Jul 2012 08:05:15 -0700
Subject: ARM: OMAP2+: Move omap3 dpll ops to dpll3xxx.c

In order to remove unnecessary idefs, move noncore and core
dpll ops to dpll3xxx.c file (where it should have been already).

The clkops (clkops_omap3_core_dpll_ops & clkops_omap3_noncore_dpll_ops)
is used in clock data files, and dependency is already handled by
Makefile rule.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock.c    | 18 ------------------
 arch/arm/mach-omap2/dpll3xxx.c | 14 ++++++++++++++
 2 files changed, 14 insertions(+), 18 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 5c4e6654216..ea3f565ba1a 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -398,24 +398,6 @@ int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 	return omap2_clksel_set_parent(clk, new_parent);
 }
 
-/* OMAP3/4 non-CORE DPLL clkops */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-
-const struct clkops clkops_omap3_noncore_dpll_ops = {
-	.enable		= omap3_noncore_dpll_enable,
-	.disable	= omap3_noncore_dpll_disable,
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-const struct clkops clkops_omap3_core_dpll_ops = {
-	.allow_idle	= omap3_dpll_allow_idle,
-	.deny_idle	= omap3_dpll_deny_idle,
-};
-
-#endif
-
 /*
  * OMAP2+ clock reset and init functions
  */
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index c310dc0d40b..b9c8d2f6a81 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -638,3 +638,17 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
 		rate = clk->parent->rate * 2;
 	return rate;
 }
+
+/* OMAP3/4 non-CORE DPLL clkops */
+
+const struct clkops clkops_omap3_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+const struct clkops clkops_omap3_core_dpll_ops = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
-- 
cgit v1.2.3-70-g09d2


From 1c213ba16ed8f48fc12dfec8a588d608ffef0904 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 5 Jul 2012 08:05:15 -0700
Subject: ARM: OMAP2+: am33xx: Make am33xx as a separate class

Initially, we decided to make am33xx family of device to fall
under omap3 class (cpu_is_omap34xx() = true), since it carries
Cortex-A8 core. But while adding complete baseport support
(like, clock, power and hwmod) support, it is observed that,
we are creating more and more problems by treating am33xx device
as omap3 family, as nothing matches between them
(except cortex-A8 mpu).

So,  after long discussion we have came to the conclusion that,
we should not consider am33xx device as omap3 family, instead
create separate class (SOC_AM33XX) under OMAP2PLUS.
This means, for am33xx device, cpu_is_omap34xx() will return false,
and only cpu_is_am33xx() will be true.

Please refer to the link below, for mailing-list discussion on this -

http://www.spinics.net/lists/linux-omap/msg69439.html

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
[tony@atomide.com: fixed typo, updated for soc_is changes]
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig           | 4 +++-
 arch/arm/mach-omap2/Makefile          | 5 +++++
 arch/arm/mach-omap2/common.c          | 2 ++
 arch/arm/plat-omap/include/plat/cpu.h | 9 ++++++---
 arch/arm/plat-omap/sram.c             | 2 +-
 5 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 042f157a8f9..3649a34db00 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -82,8 +82,10 @@ config SOC_TI81XX
 
 config SOC_AM33XX
 	bool "AM33XX support"
-	depends on ARCH_OMAP3
 	default y
+	select CPU_V7
+	select ARM_CPU_SUSPEND if PM
+	select MULTI_IRQ_HANDLER
 
 config OMAP_PACKAGE_ZAF
        bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 54ad3a4b612..846d44547fd 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -16,6 +16,7 @@ secure-common				= omap-smc.o omap-secure.o
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common)
 obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common)
+obj-$(CONFIG_SOC_AM33XX) += irq.o $(hwmod-common)
 
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
 obj-y += mcbsp.o
@@ -100,6 +101,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP3)		+= voltagedomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(voltagedomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= voltagedomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(voltagedomain-common)
 obj-$(CONFIG_SOC_AM33XX)                += voltagedomains33xx_data.o
 
 # OMAP powerdomain framework
@@ -115,6 +117,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= powerdomains2xxx_3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= powerdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(powerdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= powerdomains33xx_data.o
 
@@ -132,6 +135,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= clockdomains3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clockdomain-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain44xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= clockdomains44xx_data.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clockdomain-common)
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomain33xx.o
 obj-$(CONFIG_SOC_AM33XX)		+= clockdomains33xx_data.o
 
@@ -151,6 +155,7 @@ obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o clock3xxx_data.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common) dpll3xxx.o
 
 # OMAP2 clock rate set data (old "OPP" data)
 obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index 8a6953a34fe..a7aa538e681 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -134,7 +134,9 @@ void __init ti81xx_map_io(void)
 {
 	omapti81xx_map_common_io();
 }
+#endif
 
+#if defined(CONFIG_SOC_AM33XX)
 #define AM33XX_TAP_BASE		(AM33XX_CTRL_BASE + \
 				TI81XX_CONTROL_DEVICE_ID - 0x204)
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index de6c0a08f46..4f9d60192ef 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -344,8 +344,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 # undef cpu_is_ti816x
 # undef cpu_is_ti814x
 # undef soc_is_am35xx
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
 # define cpu_is_omap3430()		is_omap3430()
 # undef cpu_is_omap3630
 # define cpu_is_omap3630()		is_omap363x()
@@ -353,6 +351,11 @@ IS_OMAP_TYPE(3430, 0x3430)
 # define cpu_is_ti816x()		is_ti816x()
 # define cpu_is_ti814x()		is_ti814x()
 # define soc_is_am35xx()		is_am35xx()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef cpu_is_am33xx
+# undef cpu_is_am335x
 # define cpu_is_am33xx()		is_am33xx()
 # define cpu_is_am335x()		is_am335x()
 #endif
@@ -408,7 +411,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define AM35XX_REV_ES1_0	AM35XX_CLASS
 #define AM35XX_REV_ES1_1	(AM35XX_CLASS | (0x1 << 8))
 
-#define AM335X_CLASS		0x33500034
+#define AM335X_CLASS		0x33500033
 #define AM335X_REV_ES1_0	AM335X_CLASS
 
 #define OMAP443X_CLASS		0x44300044
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 477363c163e..564cb4c84b1 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -85,7 +85,7 @@ static int is_sram_locked(void)
 			__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
 		}
-		if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+		if (cpu_is_omap34xx()) {
 			__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
 			__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
 			__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
-- 
cgit v1.2.3-70-g09d2


From 971b8a9c3eeb798f6201299728fdbb04ebb681c6 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 5 Jul 2012 08:05:15 -0700
Subject: ARM: OMAP2+: am33xx: Change cpu_is_am33xx to soc_is_am33xx

As per recent discussion on the linux-omap list, we are
moving in the direction where, we will have only architecture,
ARCH_OMAP2PLUS and all devices/platforms will be treated
as a SoC underneath.

So the first step in this direction is to adopt this change
for all new devices getting in, converting
cpu_is_am33xx/335x() ==> soc_is_am33xx/335x()

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock3xxx_data.c  |  2 +-
 arch/arm/mach-omap2/id.c              |  4 ++--
 arch/arm/plat-omap/include/plat/cpu.h | 12 ++++++------
 arch/arm/plat-omap/sram.c             |  4 ++--
 4 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 71a1d338380..7300982a8e0 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3491,7 +3491,7 @@ int __init omap3xxx_clk_init(void)
 	} else if (cpu_is_ti816x()) {
 		cpu_mask = RATE_IN_TI816X;
 		cpu_clkflg = CK_TI816X;
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		cpu_mask = RATE_IN_AM33XX;
 	} else if (cpu_is_ti814x()) {
 		cpu_mask = RATE_IN_TI814X;
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 00486a8564f..37eb95aaf2f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -44,7 +44,7 @@ int omap_type(void)
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_am33xx()) {
+	} else if (soc_is_am33xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
@@ -189,7 +189,7 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
 	} else if (cpu_is_ti816x()) {
 		cpu_name = "TI816X";
-	} else if (cpu_is_am335x()) {
+	} else if (soc_is_am335x()) {
 		cpu_name =  "AM335X";
 	} else if (cpu_is_ti814x()) {
 		cpu_name = "TI814X";
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 4f9d60192ef..14f050f7a89 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -150,8 +150,8 @@ IS_AM_SUBCLASS(335x, 0x335)
 #define cpu_is_ti816x()			0
 #define cpu_is_ti814x()			0
 #define soc_is_am35xx()			0
-#define cpu_is_am33xx()			0
-#define cpu_is_am335x()			0
+#define soc_is_am33xx()			0
+#define soc_is_am335x()			0
 #define cpu_is_omap44xx()		0
 #define cpu_is_omap443x()		0
 #define cpu_is_omap446x()		0
@@ -354,10 +354,10 @@ IS_OMAP_TYPE(3430, 0x3430)
 #endif
 
 # if defined(CONFIG_SOC_AM33XX)
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
-# define cpu_is_am33xx()		is_am33xx()
-# define cpu_is_am335x()		is_am335x()
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx()		is_am33xx()
+# define soc_is_am335x()		is_am335x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 564cb4c84b1..70cf825bdd8 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -123,7 +123,7 @@ static void __init omap_detect_sram(void)
 				omap_sram_size = 0x800; /* 2K */
 			}
 		} else {
-			if (cpu_is_am33xx()) {
+			if (soc_is_am33xx()) {
 				omap_sram_start = AM33XX_SRAM_PA;
 				omap_sram_size = 0x10000; /* 64K */
 			} else if (cpu_is_omap34xx()) {
@@ -386,7 +386,7 @@ int __init omap_sram_init(void)
 		omap242x_sram_init();
 	else if (cpu_is_omap2430())
 		omap243x_sram_init();
-	else if (cpu_is_am33xx())
+	else if (soc_is_am33xx())
 		am33xx_sram_init();
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
-- 
cgit v1.2.3-70-g09d2


From ecc46cfdad7499a21296f0757059c4965f1fbc98 Mon Sep 17 00:00:00 2001
From: Vaibhav Hiremath <hvaibhav@ti.com>
Date: Thu, 5 Jul 2012 08:05:15 -0700
Subject: ARM: OMAP2+: Remove unnecessary ifdef around __omap2_set_globals

The function __omap2_set_globals() can be common across all
platforms/architectures, even in case of omap4, internally it
calls same set of functions as in __omap2_set_globals() function
(except for sdrc).
This patch adds new config flag SOC_HAS_OMAP2_SDRC to handle sdrc,
so that we can reuse same function across omap2/3/4...

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig  | 8 ++++++++
 arch/arm/mach-omap2/Makefile | 3 ++-
 arch/arm/mach-omap2/common.c | 8 +-------
 arch/arm/mach-omap2/common.h | 5 +++++
 4 files changed, 16 insertions(+), 8 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3649a34db00..6c934778357 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -21,12 +21,16 @@ config ARCH_OMAP2PLUS_TYPICAL
 	help
 	  Compile a kernel suitable for booting most boards
 
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
 config ARCH_OMAP2
 	bool "TI OMAP2"
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
@@ -38,6 +42,7 @@ config ARCH_OMAP3
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
+	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -64,16 +69,19 @@ config SOC_OMAP2420
 	depends on ARCH_OMAP2
 	default y
 	select OMAP_DM_TIMER
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP2430
 	bool "OMAP2430 support"
 	depends on ARCH_OMAP2
 	default y
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3
 	default y
+	select SOC_HAS_OMAP2_SDRC
 
 config SOC_TI81XX
 	bool "TI81XX support"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 846d44547fd..240f1969f2a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,7 +6,7 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
 	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 clock-common				= clock.o clock_common_data.o \
@@ -23,6 +23,7 @@ obj-y += mcbsp.o
 endif
 
 obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+obj-$(CONFIG_SOC_HAS_OMAP2_SDRC)	+= sdrc.o
 
 # SMP support ONLY available for OMAP4
 
diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
index a7aa538e681..73d2a0b9ca0 100644
--- a/arch/arm/mach-omap2/common.c
+++ b/arch/arm/mach-omap2/common.c
@@ -29,8 +29,6 @@
 
 /* Global address base setup code */
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
 static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 {
 	omap2_set_globals_tap(omap2_globals);
@@ -39,8 +37,6 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 	omap2_set_globals_prcm(omap2_globals);
 }
 
-#endif
-
 #if defined(CONFIG_SOC_OMAP2420)
 
 static struct omap_globals omap242x_globals = {
@@ -173,9 +169,7 @@ static struct omap_globals omap4_globals = {
 
 void __init omap2_set_globals_443x(void)
 {
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
+	__omap2_set_globals(&omap4_globals);
 }
 
 void __init omap4_map_io(void)
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 5d99c1b2cb4..404f172d95a 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -174,7 +174,12 @@ void omap2_set_globals_am33xx(void);
 
 /* These get called from omap2_set_globals_xxxx(), do not call these */
 void omap2_set_globals_tap(struct omap_globals *);
+#if defined(CONFIG_SOC_HAS_OMAP2_SDRC)
 void omap2_set_globals_sdrc(struct omap_globals *);
+#else
+static inline void omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
+{ }
+#endif
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
-- 
cgit v1.2.3-70-g09d2


From 68c9a95e9253ce1776bd21bf8d37ddf213cced66 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 6 Jul 2012 00:58:43 -0700
Subject: ARM: OMAP2+: Fix mismerge for omap_hwmod_get_main_clk() API

Commit ac5b0ea3d (Merge tag 'omap-devel-f-for-3.6'...) had a merge
conflict that somehow got incorrecly resolved in a lossy way for
commit bed9d1bb (ARM: OMAP2+: hwmod: add omap_hwmod_get_main_clk() API).
Fix the issue by applying the missing pieces.

Reported-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/omap_hwmod.c             | 15 +++++++++++++++
 arch/arm/plat-omap/include/plat/omap_hwmod.h |  2 ++
 2 files changed, 17 insertions(+)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index ebdf0016e53..ff76ef1d723 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3633,3 +3633,18 @@ void __init omap_hwmod_init(void)
 
 	inited = true;
 }
+
+/**
+ * omap_hwmod_get_main_clk - get pointer to main clock name
+ * @oh: struct omap_hwmod *
+ *
+ * Returns the main clock name assocated with @oh upon success,
+ * or NULL if @oh is NULL.
+ */
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
+{
+	if (!oh)
+		return NULL;
+
+	return oh->main_clk;
+}
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 30f55eb8b0b..6132972aff3 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -648,6 +648,8 @@ int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
 
 extern void __init omap_hwmod_init(void);
 
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
-- 
cgit v1.2.3-70-g09d2


From ae6df418a21f3a361c5f9b878e32a8aba4e17692 Mon Sep 17 00:00:00 2001
From: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Date: Thu, 5 Jul 2012 18:10:59 +0530
Subject: ARM: OMAP2+: dmtimer: cleanup fclk usage

With omap_hwmod_get_main_clk() now available, this can be passed to
clk_get() to extract the fclk and thus avoid construction of fclk name.
Corrected the timer fck name mis-match between clock44xx_data.c and
omap_hwmod_44xx_data.c. For other platforms this is already taken care.

Cc: Cousson, Benoit <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/clock44xx_data.c | 22 +++++++++++-----------
 arch/arm/mach-omap2/timer.c          |  3 +--
 2 files changed, 12 insertions(+), 13 deletions(-)

(limited to 'arch/arm')

diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index de53b7014b8..1b0b049fe44 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3299,17 +3299,17 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
 	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
-	CLK(NULL,	"gpt1_fck",			&timer1_fck,	CK_443X),
-	CLK(NULL,	"gpt10_fck",			&timer10_fck,	CK_443X),
-	CLK(NULL,	"gpt11_fck",			&timer11_fck,	CK_443X),
-	CLK(NULL,	"gpt2_fck",			&timer2_fck,	CK_443X),
-	CLK(NULL,	"gpt3_fck",			&timer3_fck,	CK_443X),
-	CLK(NULL,	"gpt4_fck",			&timer4_fck,	CK_443X),
-	CLK(NULL,	"gpt5_fck",			&timer5_fck,	CK_443X),
-	CLK(NULL,	"gpt6_fck",			&timer6_fck,	CK_443X),
-	CLK(NULL,	"gpt7_fck",			&timer7_fck,	CK_443X),
-	CLK(NULL,	"gpt8_fck",			&timer8_fck,	CK_443X),
-	CLK(NULL,	"gpt9_fck",			&timer9_fck,	CK_443X),
+	CLK(NULL,	"timer1_fck",			&timer1_fck,	CK_443X),
+	CLK(NULL,	"timer10_fck",			&timer10_fck,	CK_443X),
+	CLK(NULL,	"timer11_fck",			&timer11_fck,	CK_443X),
+	CLK(NULL,	"timer2_fck",			&timer2_fck,	CK_443X),
+	CLK(NULL,	"timer3_fck",			&timer3_fck,	CK_443X),
+	CLK(NULL,	"timer4_fck",			&timer4_fck,	CK_443X),
+	CLK(NULL,	"timer5_fck",			&timer5_fck,	CK_443X),
+	CLK(NULL,	"timer6_fck",			&timer6_fck,	CK_443X),
+	CLK(NULL,	"timer7_fck",			&timer7_fck,	CK_443X),
+	CLK(NULL,	"timer8_fck",			&timer8_fck,	CK_443X),
+	CLK(NULL,	"timer9_fck",			&timer9_fck,	CK_443X),
 	CLK(NULL,	"uart1_fck",			&uart1_fck,	CK_443X),
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index b5b5d92acd9..2b318ec92d3 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -168,8 +168,7 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 		return -ENXIO;
 
 	/* After the dmtimer is using hwmod these clocks won't be needed */
-	sprintf(name, "gpt%d_fck", gptimer_id);
-	timer->fclk = clk_get(NULL, name);
+	timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
 	if (IS_ERR(timer->fclk))
 		return -ENODEV;
 
-- 
cgit v1.2.3-70-g09d2


From fb584511c4664573097ece7df0de06ad00b713a2 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Fri, 6 Jul 2012 14:55:42 +0530
Subject: ARM: OMAP: sdrc: Fix the build break for OMAP4 only builds

OMAP4 only build breaks with below error

arch/arm/mach-omap2/sdrc.c:135: error: redefinition of 'omap2_sdrc_init'
arch/arm/plat-omap/include/plat/sdrc.h:130: note: previous definition of 'omap2_sdrc_init' was here
make[1]: *** [arch/arm/mach-omap2/sdrc.o] Error 1

Fix the same by using newly introduced CONFIG_SOC_HAS_OMAP2_SDRC marco.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/plat/sdrc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/arm')

diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 9bb978ecd88..36d6a766621 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -123,7 +123,7 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
 void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 			    struct omap_sdrc_params *sdrc_cs1);
 #else
-- 
cgit v1.2.3-70-g09d2