From 9bbb851c7079ff670ba3fe6c7ce93bb5daa9a694 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 30 Apr 2010 19:30:35 +0900 Subject: ARM: S3C24XX: Add initial s3c_gpio configuration code Add support for s3c_gpio_setcfg() and s3c_gpio_setpull() implementations to get ready for removal of the specific code being used by s3c24xx. Also rename the s3c_gpio_setcfg_s3c24xx_banka to s3c_gpio_setcfg_s3c24xx_a as seen in the header file to correct a build warning. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Kconfig | 1 + arch/arm/plat-s3c24xx/gpiolib.c | 17 ++++++++++++++++- arch/arm/plat-samsung/gpio-config.c | 4 ++-- arch/arm/plat-samsung/include/plat/gpio-core.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 6e93ef8f3d4..a830fad6f89 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4f0f11a6a67..376b061804c 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -21,6 +21,8 @@ #include #include +#include +#include #include #include #include @@ -77,10 +79,19 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) return IRQ_EINT8 + offset; } +static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c_gpio_setcfg_s3c24xx_a, +}; + +struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = s3c_gpio_setcfg_s3c24xx, +}; + struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C2410_GPACON, .pm = __gpio_pm(&s3c_gpio_pm_1bit), + .config = &s3c24xx_gpiocfg_banka, .chip = { .base = S3C2410_GPA(0), .owner = THIS_MODULE, @@ -168,8 +179,12 @@ static __init int s3c24xx_gpiolib_init(void) struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + s3c_gpiolib_add(chip); + } return 0; } diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 44a84e89654..c5832824e19 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -61,8 +61,8 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) +int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift = off; diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406a706..f0584f26d49 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -108,6 +108,9 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); +/* exported for core SoC support to change */ +extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; -- cgit v1.2.3-70-g09d2 From 1ec7269fd8b05044f2cb4059b679e053d57460f5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 May 2010 14:39:45 +0900 Subject: ARM: S3C24XX: Add the gpio pull configuration for pull-up Add the necessary gpio configuration helper for the devices which have a single-bit pull-up resistor disabled. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 1 + arch/arm/mach-s3c2410/s3c2410.c | 8 ++++++ arch/arm/mach-s3c2440/Kconfig | 1 + arch/arm/mach-s3c2440/s3c2440.c | 8 ++++++ arch/arm/plat-samsung/gpio-config.c | 32 ++++++++++++++++++++++ .../plat-samsung/include/plat/gpio-cfg-helpers.h | 11 ++++++++ 6 files changed, 61 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 554731868b0..9e5e96f12d8 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 91ba42f688a..adc90a3c589 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,10 @@ #include #include +#include +#include +#include + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -65,6 +70,9 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 7f465265cf0..9d102b91209 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2410_GPIO diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 2b68f7ea45a..d50f3ae6173 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -33,6 +34,10 @@ #include #include +#include +#include +#include + static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, }; @@ -41,6 +46,9 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index c5832824e19..8aca88d6c48 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -164,3 +164,35 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, return (__force s3c_gpio_pull_t)pup; } #endif + +#ifdef CONFIG_S3C_GPIO_PULL_UP +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup = __raw_readl(reg); + + if (pup == S3C_GPIO_PULL_UP) + pup &= ~(1 << off); + else if (pup == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP */ + diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index dda19da037a..885e9ac642d 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -145,6 +145,17 @@ extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, unsigned int off); +/** + * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-up resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1up. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. -- cgit v1.2.3-70-g09d2 From 7ced5eab39809539e8fc7f3fb561bd3001d535e7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 3 May 2010 17:19:49 +0900 Subject: ARM: S3C24XX: Add extended GPIO used on S3C2443 and beyond Add the GPIO banks that are used on the S3C2443 and above to the list of available GPIOS. Currently we do not have any limit on the SoC GPIO, so these are being registered whether the SoC has them or not. It is currently up to the user not to try and use them. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 12 ++++++++ arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 17 ++++++++++ arch/arm/mach-s3c2410/include/mach/regs-gpioj.h | 4 --- arch/arm/plat-s3c24xx/gpiolib.c | 41 ++++++++++++++++++++++++- 4 files changed, 69 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index 2edbb9c88ab..f3182ff847c 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -34,6 +34,10 @@ #define S3C2410_GPIO_F_NR (32) #define S3C2410_GPIO_G_NR (32) #define S3C2410_GPIO_H_NR (32) +#define S3C2410_GPIO_J_NR (32) /* technically 16. */ +#define S3C2410_GPIO_K_NR (32) /* technically 16. */ +#define S3C2410_GPIO_L_NR (32) /* technically 15. */ +#define S3C2410_GPIO_M_NR (32) /* technically 2. */ #if CONFIG_S3C_GPIO_SPACE != 0 #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment @@ -53,6 +57,10 @@ enum s3c_gpio_number { S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), + S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), + S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), + S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), + S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), }; #endif /* __ASSEMBLY__ */ @@ -67,6 +75,10 @@ enum s3c_gpio_number { #define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) #define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) #define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) +#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) +#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) +#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) +#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) /* compatibility until drivers can be modified */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index fd672f330bf..821b966bf05 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -639,6 +639,23 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* S3C2443 and above */ +#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) +#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) +#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8) + +#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0) +#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4) +#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8) + +#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0) +#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4) +#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8) + +#define S3C2443_GPMCON S3C2410_GPIOREG(0x100) +#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104) +#define S3C2443_GPMUP S3C2410_GPIOREG(0x108) + /* miscellaneous control */ #define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h index 1202ca5e99f..de463bc17b5 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -24,10 +24,6 @@ #define S3C2440_GPIO_BANKJ (416) -#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) - #define S3C2413_GPJCON S3C2410_GPIOREG(0x80) #define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 376b061804c..e8c0e8a247b 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpiolib.c * - * Copyright (c) 2008 Simtec Electronics + * Copyright (c) 2008-2010 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks * @@ -172,8 +172,47 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { .ngpio = 11, }, }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, }; + static __init int s3c24xx_gpiolib_init(void) { struct s3c_gpio_chip *chip = s3c24xx_gpios; -- cgit v1.2.3-70-g09d2 From f4146a65fbdc5274a437f77ff2f3b4889c0edd0e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 11:23:05 +0900 Subject: ARM: H1940: Change h1940-bluetooth to use gpiolib API Change the h1940-bluetooth driver to use gpiolib to set the output state of GPH1. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index a3f3c7b1ca3..6d06b7e2579 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -33,14 +33,15 @@ static void h1940bt_enable(int on) h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); } else { - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); } @@ -61,6 +62,12 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) struct rfkill *rfk; int ret = 0; + ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "could not get GPH1\n");\ + return ret; + } + /* Configures BT serial port GPIOs */ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); s3c2410_gpio_pullup(S3C2410_GPH(0), 1); @@ -100,6 +107,7 @@ static int h1940bt_remove(struct platform_device *pdev) struct rfkill *rfk = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); + gpio_free(S3C2410_GPH(1)); if (rfk) { rfkill_unregister(rfk); -- cgit v1.2.3-70-g09d2 From afc84ad11b5c1247c2d0df06f10df69ea7206f6a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 11:30:42 +0900 Subject: ARM: JIVE: Update mach-jive to use gpiolib API Change mach-jive to use gpiolib for the GPIO lines that are directly manipulated by it. Note, we ignore any errors from gpio_request(), unlikely to see any. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/mach-jive.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 14f4798291a..d2bb7d2510f 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -357,8 +357,7 @@ static void jive_lcm_reset(unsigned int set) { printk(KERN_DEBUG "%s(%d)\n", __func__, set); - s3c2410_gpio_setpin(S3C2410_GPG(13), set); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_set_value(S3C2410_GPG(13), set); } #undef LCD_UPPER_MARGIN @@ -391,7 +390,7 @@ static struct ili9320_platdata jive_lcm_config = { static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1); + gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_lcd_spi = { @@ -413,7 +412,7 @@ static struct platform_device jive_device_lcdspi = { static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1); + gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_wm8750_spi = { @@ -636,11 +635,11 @@ static void __init jive_machine_init(void) /* initialise the spi */ - s3c2410_gpio_setpin(S3C2410_GPG(13), 0); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPG(13), "lcm reset"); + gpio_direction_output(S3C2410_GPG(13), 0); - s3c2410_gpio_setpin(S3C2410_GPB(7), 1); - s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPB(7), "jive spi"); + gpio_direction_output(S3C2410_GPB(7), 1); s3c2410_gpio_setpin(S3C2410_GPB(6), 0); s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); @@ -650,8 +649,8 @@ static void __init jive_machine_init(void) /* initialise the WM8750 spi */ - s3c2410_gpio_setpin(S3C2410_GPH(10), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPH(10), "jive wm8750 spi"); + gpio_direction_output(S3C2410_GPH(10), 1); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ -- cgit v1.2.3-70-g09d2 From db61ac54c9bea389b98f88cb4a23f8dd1edde07f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 11:40:51 +0900 Subject: ARM: H1940: Change mach-h1940 to use gpiolib API Change mach-h1940 to use the gpiolib calls instead of s3c2410_gpio directly. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-h1940.c | 15 ++++++++------- arch/arm/mach-s3c2412/mach-smdk2413.c | 8 ++++---- 2 files changed, 12 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index fbedd076094..5527f746c5e 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -207,7 +207,7 @@ static int h1940_backlight_init(struct device *dev) { gpio_request(S3C2410_GPB(0), "Backlight"); - s3c2410_gpio_setpin(S3C2410_GPB(0), 0); + gpio_direction_output(S3C2410_GPB(0), 0); s3c2410_gpio_pullup(S3C2410_GPB(0), 0); s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); @@ -216,7 +216,7 @@ static int h1940_backlight_init(struct device *dev) static void h1940_backlight_exit(struct device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/); + gpio_direction_output(S3C2410_GPB(0), 1); } static struct platform_pwm_backlight_data backlight_data = { @@ -245,18 +245,18 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, if (!power) { /* set to 3ec */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(0), 0); /* wait for 3ac */ do { - value = s3c2410_gpio_getpin(S3C2410_GPC(6)); + value = gpio_get_value(S3C2410_GPC(6)); } while (value); /* set to 38c */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_direction_output(S3C2410_GPC(5), 0); } else { /* Set to 3ac */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_direction_output(S3C2410_GPC(5), 1); /* Set to 3ad */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 1); + gpio_direction_output(S3C2410_GPC(0), 1); } } @@ -332,6 +332,7 @@ static void __init h1940_init(void) gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); + gpio_direction_input(S3C2410_GPC(6)); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 0392065af1a..faddb36ed23 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + gpio_set_value(S3C2410_GPF(2), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + gpio_set_value(S3C2410_GPF(2), 0); break; case S3C2410_UDC_P_RESET : break; @@ -134,8 +134,8 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull")); + gpio_direction_output(S3C2410_GPF(2), 0); s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | -- cgit v1.2.3-70-g09d2 From 2d2e0c89982c532f9da6891a733b7be43c7048ce Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 12:32:16 +0900 Subject: ARM: QT2410: Update mach-qt2410 to use gpiolib API Change mach-qt2410.c to use gpiolib for the GPIO lines that are directly manipulated by it. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-qt2410.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 92a4ec375d8..e9762fb30d3 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -219,10 +219,10 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) { switch (cs) { case BITBANG_CS_ACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 0); + gpio_set_value(S3C2410_GPB(5), 0); break; case BITBANG_CS_INACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 1); + gpio_set_value(S3C2410_GPB(5), 1); break; } } @@ -353,7 +353,8 @@ static void __init qt2410_machine_init(void) s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); - s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs")); + gpio_direction_output(S3C2410_GPB(5), 1); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); -- cgit v1.2.3-70-g09d2 From 96efa8dac85372fdddb1682949b468226126e333 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 12:36:33 +0900 Subject: ARM: n30: Update mach-n30 to use gpiolib API Change mach-n30.c to use gpiolib for the GPIO lines that are directly manipulated by it. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 684710f8814..75a9fd37a46 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -86,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) { switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPB(3), 1); + gpio_set_value(S3C2410_GPB(3), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPB(3), 0); + gpio_set_value(S3C2410_GPB(3), 0); break; case S3C2410_UDC_P_RESET : break; @@ -536,6 +536,9 @@ static void __init n30_init(void) platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } + + WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup")); + gpio_direction_output(S3C2410_GPB(3), 0); } MACHINE_START(N30, "Acer-N30") -- cgit v1.2.3-70-g09d2 From 408c8b8ca46c16fa09a6795613db74a8d2de7980 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 12:49:04 +0900 Subject: ARM: BAST: Update mach-bast to use gpiolib API Change mach-bast .c to use gpiolib for the GPIO lines that are directly manipulated by it. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 02b1b6220cb..d03cbe2acde 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -216,9 +216,7 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) { /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); - + gpio_direction_output(S3C2410_GPA(21), 1); return 0; } @@ -658,6 +656,8 @@ static void __init bast_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, &bast_audio); + WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); + s3c_cpufreq_setboard(&bast_cpufreq); } -- cgit v1.2.3-70-g09d2 From 7614e1d9b9cad40ac9c90d934d2da64b36f354d1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 12:53:11 +0900 Subject: ARM: VR1000: Update mach-vr1000.c to use gpiolib API Change mach-vr1000.c to use gpiolib for gpio control. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-vr1000.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9051f0d3112..d540d79dd26 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -357,8 +357,7 @@ static struct clk *vr1000_clocks[] __initdata = { static void vr1000_power_off(void) { - s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(9), 1); + gpio_direction_output(S3C2410_GPB(9), 1); } static void __init vr1000_map_io(void) @@ -395,6 +394,8 @@ static void __init vr1000_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, NULL); + + WARN_ON(gpio_request(S3C2410_GPB(9), "power off")); } MACHINE_START(VR1000, "Thorcom-VR1000") -- cgit v1.2.3-70-g09d2 From 27da04049cabdf6a28288aaf083cfea64f7f9805 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 13:20:12 +0900 Subject: ARM: S3C2410: Change s3c2410_gpio_pullupl(x, 1) to use s3c_gpio_cfgpull() Start moving code that is using the old s3c2410_gpio API to using the newer s3c_gpio variants by finding all the usages of s3c2410_gpio_pullup() which disable the pin's pull up and replacing them. sed 's/s3c2410_gpio_pullup\(.*\), 1/s3c_gpio_cfgpull\1, S3C_GPIO_PULL_NONE/g' Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 6d06b7e2579..171a7c38428 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -70,13 +70,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) /* Configures BT serial port GPIOs */ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c2410_gpio_pullup(S3C2410_GPH(0), 1); + s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPH(1), 1); + s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c2410_gpio_pullup(S3C2410_GPH(2), 1); + s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c2410_gpio_pullup(S3C2410_GPH(3), 1); + s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, -- cgit v1.2.3-70-g09d2 From 82a4b6dcc72da33943b16338f607e7e148d177e4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 13:22:58 +0900 Subject: ARM: S3C24XX: Change s3c2410_gpio_pullupl(x, 1) to use s3c_gpio_cfgpull() Start moving code that is using the old s3c2410_gpio API to using the newer s3c_gpio variants by finding all the usages of s3c2410_gpio_pullup() which disable the pin's pull up and replacing them. sed 's/s3c2410_gpio_pullup\(.*\), 1/s3c_gpio_cfgpull\1, S3C_GPIO_PULL_NONE/g' Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 6 +++--- arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 6 +++--- arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index da7a61728c1..71256ad6e8e 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, } else { s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPE(11), 1); - s3c2410_gpio_pullup(S3C2410_GPE(12), 1); - s3c2410_gpio_pullup(S3C2410_GPE(13), 1); + s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index 89fcf5308cf..31bda55f6a1 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, } else { s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPD(10), 1); - s3c2410_gpio_pullup(S3C2410_GPD(9), 1); - s3c2410_gpio_pullup(S3C2410_GPD(8), 1); + s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 86b9edc6741..79105015cdc 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, } else { s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPG(5), 1); - s3c2410_gpio_pullup(S3C2410_GPG(6), 1); - s3c2410_gpio_pullup(S3C2410_GPG(7), 1); + s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } -- cgit v1.2.3-70-g09d2 From 40b956f026a3303a67d2ab7fffa2331f72e1e019 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 14:38:49 +0900 Subject: ARM: S3C24XX: Drop s3c2410 specific s3c2410_gpio_cfgpin() The s3c_gpio_cfgpin() call should be functionally equivalent, so replace the s3c2410_gpio_cfgpin() calls in the s3c24xx code with s3c_gpio_cfgpin to allow moving away from a fixed GPIO number to register address mapping Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/h1940-bluetooth.c | 8 ++++---- arch/arm/mach-s3c2410/mach-amlm5900.c | 3 ++- arch/arm/mach-s3c2410/mach-bast.c | 3 ++- arch/arm/mach-s3c2410/mach-h1940.c | 3 ++- arch/arm/mach-s3c2410/mach-qt2410.c | 3 ++- arch/arm/mach-s3c2412/mach-jive.c | 7 ++++--- arch/arm/mach-s3c2440/mach-mini2440.c | 11 ++++++----- arch/arm/mach-s3c2440/mach-nexcoder.c | 9 +++++---- arch/arm/mach-s3c2440/mach-osiris.c | 5 +++-- arch/arm/plat-s3c24xx/common-smdk.c | 9 +++++---- arch/arm/plat-s3c24xx/pm.c | 3 ++- arch/arm/plat-s3c24xx/setup-i2c.c | 5 +++-- arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c | 10 +++++----- arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c | 10 +++++----- arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c | 10 +++++----- 15 files changed, 55 insertions(+), 44 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 171a7c38428..8cdeb14af59 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -69,13 +69,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) } /* Configures BT serial port GPIOs */ - s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); + s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); - s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); - s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); + s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); - s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); + s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 7047317ed7f..b42a76042af 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -56,6 +56,7 @@ #include #include #include +#include #ifdef CONFIG_MTD_PARTITIONS @@ -225,7 +226,7 @@ static void amlm5900_init_pm(void) } else { enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); s3c2410_gpio_pullup(S3C2410_GPF(2), 0); } } diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index d03cbe2acde..b061ddcf306 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -61,6 +61,7 @@ #include #include #include +#include #include #include "usb-simtec.h" @@ -222,7 +223,7 @@ static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) static int bast_pm_resume(struct sys_device *sd) { - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 5527f746c5e..e2f7e64a526 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -50,6 +50,7 @@ #include #include +#include #include #include #include @@ -209,7 +210,7 @@ static int h1940_backlight_init(struct device *dev) gpio_direction_output(S3C2410_GPB(0), 0); s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); return 0; } diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index e9762fb30d3..d0e87b6e2e0 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -58,6 +58,7 @@ #include #include +#include #include #include #include @@ -347,7 +348,7 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPB(0), 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index d2bb7d2510f..43160183571 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -48,6 +48,7 @@ #include #include +#include #include #include #include @@ -530,7 +531,7 @@ static void jive_power_off(void) printk(KERN_INFO "powering system down...\n"); s3c2410_gpio_setpin(S3C2410_GPC(5), 1); - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); } static void __init jive_machine_init(void) @@ -642,10 +643,10 @@ static void __init jive_machine_init(void) gpio_direction_output(S3C2410_GPB(7), 1); s3c2410_gpio_setpin(S3C2410_GPB(6), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPG(8), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); /* initialise the WM8750 spi */ diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 571b17683d9..362a2f97f74 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -53,6 +53,7 @@ #include #include +#include #include #include #include @@ -632,24 +633,24 @@ static void __init mini2440_init(void) mini2440_parse_features(&features, mini2440_features_str); /* turn LCD on */ - s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); + s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ s3c2410_gpio_setpin(S3C2410_GPG(4), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ s3c2410_gpio_pullup(S3C2410_GPB(1), 0); s3c2410_gpio_setpin(S3C2410_GPB(1), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); /* Make sure the D+ pullup pin is output */ - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); - s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio, + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } if (features.lcd_index != -1) { diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 342041593f2..3ff62de45fd 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -40,6 +40,7 @@ #include #include +#include #include #include #include @@ -122,15 +123,15 @@ static void __init nexcoder_sensorboard_init(void) { // Initialize SCCB bus s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); // Power up the sensor board s3c2410_gpio_setpin(S3C2410_GPF(1), 1); - s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN } static void __init nexcoder_map_io(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index f35371db33f..319458da71a 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -49,6 +49,7 @@ #include #include +#include #include #include #include @@ -298,7 +299,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) /* ensure that an nRESET is not generated on resume. */ s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); return 0; } @@ -310,7 +311,7 @@ static int osiris_pm_resume(struct sys_device *sd) __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 9e0e20ad2e4..7b44d0c592b 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -42,6 +42,7 @@ #include #include +#include #include #include @@ -185,10 +186,10 @@ void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPF(4), 1); s3c2410_gpio_setpin(S3C2410_GPF(5), 1); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 3620dd29909..37ea822c5c7 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -43,6 +43,7 @@ #include +#include #include #define PFX "s3c24xx-pm: " @@ -105,7 +106,7 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) } else { if (pinstate == S3C2410_GPIO_IRQ) { S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c index 71a6accf114..9e90a7cbd1d 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -15,12 +15,13 @@ struct platform_device; +#include #include #include #include void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); } diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index 71256ad6e8e..9793544a6ac 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -21,14 +21,14 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); + s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); s3c2410_gpio_pullup(S3C2410_GPE(11), 0); s3c2410_gpio_pullup(S3C2410_GPE(13), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index 31bda55f6a1..db9e9e477ec 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -23,14 +23,14 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, printk(KERN_INFO "%s(%d)\n", __func__, enable); if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPD(10), 0); s3c2410_gpio_pullup(S3C2410_GPD(9), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 79105015cdc..8ea663a438b 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -21,14 +21,14 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPG(5), 0); s3c2410_gpio_pullup(S3C2410_GPG(6), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); -- cgit v1.2.3-70-g09d2 From eee2b94f01f7379940a656af8ef097749ce025b5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 15:01:44 +0900 Subject: ARM: S3C24XX: Remove s3c2410_gpio_setcfg() Remove the implementation of s3c2410_gpio_setcfg() as it should now be functionally equivalent to s3c_gpio_cfgpin(), and add a wrapper for those drivers that are still using this call. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 35 +++++++++++++------ arch/arm/plat-s3c24xx/gpio.c | 48 --------------------------- 2 files changed, 24 insertions(+), 59 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 035a493952d..f50c2a5f7ab 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -10,14 +10,28 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + /* These functions are in the to-be-removed category and it is strongly * encouraged not to use these in new code. They will be marked deprecated * very soon. * * Most of the functionality can be either replaced by the gpiocfg calls * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. */ +#include + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + /* external functions for GPIO support * * These allow various different clients to access the same GPIO @@ -25,17 +39,6 @@ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. */ -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); /* s3c2410_gpio_getirq @@ -71,6 +74,14 @@ extern int s3c2400_gpio_getirq(unsigned int pin); extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, unsigned int config); +/* s3c2410_gpio_pullup + * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + /* s3c2410_gpio_pullup * * configure the pull-up control on the given pin @@ -101,3 +112,5 @@ extern int s3c2410_gpio_getpull(unsigned int pin); extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 5467470badf..0b3b2cb228a 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -34,54 +34,6 @@ #include -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; - - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - unsigned int s3c2410_gpio_getcfg(unsigned int pin) { void __iomem *base = S3C24XX_GPIO_BASE(pin); -- cgit v1.2.3-70-g09d2 From e6528d5e8730b1f75acf035d7c11e06657963581 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 15:07:43 +0900 Subject: ARM: S3C24XX: Remove s3c2410_gpio_getpull() Remove the unused s3c2410_gpio_getpull() Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-fns.h | 12 ------------ arch/arm/plat-s3c24xx/gpio.c | 13 ------------- 2 files changed, 25 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index f50c2a5f7ab..f453c4f2cb8 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -97,18 +97,6 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 0b3b2cb228a..9b3d74c186f 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -20,7 +20,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #include #include #include @@ -75,18 +74,6 @@ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) EXPORT_SYMBOL(s3c2410_gpio_pullup); -int s3c2410_gpio_getpull(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - - if (pin < S3C2410_GPIO_BANKB) - return -EINVAL; - - return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_getpull); void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { -- cgit v1.2.3-70-g09d2 From 5690a6267f0f0f15a01eeed143828726627c6ae6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 4 May 2010 17:14:10 +0900 Subject: ARM: S3C24XX: Remove s3c2410_gpio_getirq() Remove s3c2410_gpio_getirq() as the only users is the pm code, and it can be replicated by using gpio_to_irq(). Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpio.c | 19 ------------------- arch/arm/plat-s3c24xx/pm.c | 2 +- 2 files changed, 1 insertion(+), 20 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 9b3d74c186f..24c00470b86 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -120,22 +120,3 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) } EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15)) - return -EINVAL; /* not valid interrupts */ - - if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7)) - return -EINVAL; /* not valid pin */ - - if (pin < S3C2410_GPF(4)) - return (pin - S3C2410_GPF(0)) + IRQ_EINT0; - - if (pin < S3C2410_GPG(0)) - return (pin - S3C2410_GPF(4)) + IRQ_EINT4; - - return (pin - S3C2410_GPG(0)) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 37ea822c5c7..691fecc61d5 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -91,7 +91,7 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); + int irq = gpio_to_irq(pin); if (irqoffs < 4) irqstate = s3c_irqwake_intmask & (1L< Date: Thu, 6 May 2010 10:27:16 +0900 Subject: ARM: SAMSUNG: Add GPIO configuration read calls Add the necessary 1,2 and 4 bit configuration read calls for the new gpio code to allow removal of the old s3c24xx gpio code. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c64xx/gpiolib.c | 6 +++ arch/arm/mach-s5p6440/gpio.c | 5 +++ arch/arm/plat-s3c24xx/gpiolib.c | 2 + arch/arm/plat-samsung/gpio-config.c | 47 +++++++++++++++++++++- .../plat-samsung/include/plat/gpio-cfg-helpers.h | 41 +++++++++++++++++++ 5 files changed, 100 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 66e6794481d..60c929a3cab 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -51,6 +51,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -58,12 +59,14 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { .cfg_eint = 7, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .cfg_eint = 3, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, @@ -171,6 +174,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -178,6 +182,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -185,6 +190,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index b0ea741177a..262dc75d5be 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -161,12 +161,15 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, }; @@ -279,6 +282,8 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; if (!chipcfg->set_pull) chipcfg->set_pull = s3c_gpio_setpull_updown; if (!chipcfg->get_pull) diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index e8c0e8a247b..4c0896f2572 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -81,10 +81,12 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { .set_config = s3c_gpio_setcfg_s3c24xx_a, + .get_config = s3c_gpio_getcfg_s3c24xx_a, }; struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }; struct s3c_gpio_chip s3c24xx_gpios[] = { diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 8aca88d6c48..19ab89df24c 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/gpio-config.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics + * Copyright 2008-2010 Simtec Electronics * Ben Dooks * http://armlinux.simtec.co.uk/ * @@ -87,6 +87,19 @@ int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, return 0; } +unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { @@ -109,6 +122,19 @@ int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, return 0; } + +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} #endif #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX @@ -134,6 +160,25 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, return 0; } + +unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 885e9ac642d..a8868c429f7 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -52,6 +52,18 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg + * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the + * S3C_GPIO_SPECIAL() macro. + */ +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) * @chip: The gpio chip that is being configured. @@ -65,6 +77,21 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa s3c_gpio_getcfg_s3c24xx + * @sa s3c_gpio_getcfg_s3c64xx_4bit + */ +extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. * @chip: The gpio chip that is being configured. @@ -85,6 +112,20 @@ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to s3c_gpio_setcfg_s3c64xx_4bit(). + * + * @sa s3c_gpio_getcfg_s3c24xx + */ +extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off); + /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440,S3C24A0 = Pull-UP, -- cgit v1.2.3-70-g09d2 From 9933847b29bb3d3447d19236375ccc84bfbcf3df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 10:50:42 +0900 Subject: ARM: S3C24XX: Remove s3c2410_gpio_getcfg(), implement s3c_gpio_getcfg() Add s3c_gpio_getcfg() and change anything using s3c2410_gpio_getcfg() to use this instead. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpio.c | 19 ------------------- arch/arm/plat-s3c24xx/pm.c | 4 ++-- arch/arm/plat-samsung/gpio-config.c | 20 ++++++++++++++++++++ .../arm/plat-samsung/include/plat/gpio-cfg-helpers.h | 6 ++++++ arch/arm/plat-samsung/include/plat/gpio-cfg.h | 11 +++++++++++ 5 files changed, 39 insertions(+), 21 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 24c00470b86..c7c0cd73b94 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -33,25 +33,6 @@ #include -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); - void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { void __iomem *base = S3C24XX_GPIO_BASE(pin); diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 691fecc61d5..60627e63a25 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -98,11 +98,11 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) else irqstate = s3c_irqwake_eintmask & (1L<chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_getcfg(chip, offset); + local_irq_restore(flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + + int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index a8868c429f7..3e21c75feef 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -30,6 +30,12 @@ static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, return (chip->config->set_config)(chip, off, config); } +static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return (chip->config->get_config)(chip, off); +} + static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull) { diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a86cad..8d01e853df3 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -77,6 +77,17 @@ struct s3c_gpio_cfg { */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); +/** + * s3c_gpio_getcfg - Read the current function for a GPIO pin + * @pin: The pin to read the configuration value for. + * + * Read the configuration state of the given @pin, returning a value that + * could be passed back to s3c_gpio_cfgpin(). + * + * @sa s3c_gpio_cfgpin + */ +extern unsigned s3c_gpio_getcfg(unsigned int pin); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors -- cgit v1.2.3-70-g09d2 From 64f508da584f983642eb8cf808fcca68f9efa44a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 10:59:55 +0900 Subject: ARM: mini2440: Move to using gpiolib API and s3c_gpio functions Move the mach-mini2440 to using the gpiolib API for GPIOS it directly uses, and s3c_gpio calls for configuration. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-mini2440.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 362a2f97f74..a76bcda210a 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -103,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_set_value(S3C2410_GPC(5), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_set_value(S3C2410_GPC(5), 0); break; case S3C2410_UDC_P_RESET : break; @@ -636,22 +636,22 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - s3c2410_gpio_setpin(S3C2410_GPG(4), 1); - s3c_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); + gpio_direction_output(S3C2410_GPG(4), 1); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - s3c2410_gpio_pullup(S3C2410_GPB(1), 0); + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); s3c2410_gpio_setpin(S3C2410_GPB(1), 0); s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); /* Make sure the D+ pullup pin is output */ - s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); + gpio_direction_output(S3C2410_GPC(5), 0); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); - s3c_gpio_cfgpin(mini2440_buttons[i].gpio, - S3C2410_GPIO_INPUT); + s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } if (features.lcd_index != -1) { int li; -- cgit v1.2.3-70-g09d2 From fb3787470ee6fee5900026170c05261c8c090a06 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 11:03:50 +0900 Subject: ARM: S3C2410: Remove the users of s3c2410_gpio_pullup() Remove the last s3c2410_gpio_pullup() users in arch/arm/mach-s3c2410 Note, since mach-h1940.c is setting output and a pull-up, the call has vbeen chanerd to S3C_GPIO_PULL_NONE instead of S3C_GPIO_PULL_UP. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index b42a76042af..34fc05a4244 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -227,7 +227,7 @@ static void amlm5900_init_pm(void) enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPF(2), 0); + s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); } } static void __init amlm5900_init(void) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index e2f7e64a526..9531b4c41de 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -209,7 +209,7 @@ static int h1940_backlight_init(struct device *dev) gpio_request(S3C2410_GPB(0), "Backlight"); gpio_direction_output(S3C2410_GPB(0), 0); - s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); return 0; -- cgit v1.2.3-70-g09d2 From 31da46d9f11ccdb11d7f2f07421f5cccb64fbbd6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 11:21:05 +0900 Subject: ARM: S3C24XX: Wrapper s3c2410_gpio_setpin and s3c2410_gpio_pullup() Change s3c2410_gpio_setpin() and s3c2410_gpio_pullup() to use the new s3c_ gpio configuration calls until all their users are converted. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpio.c | 47 ++++++++++++++++++-------------------------- 1 file changed, 19 insertions(+), 28 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index c7c0cd73b94..45126d3aafc 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpio.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2010 Simtec Electronics * Ben Dooks * * S3C24XX GPIO support @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -33,44 +34,34 @@ #include +/* gpiolib wrappers until these are totally eliminated */ + void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long up; + int ret; - if (pin < S3C2410_GPIO_BANKB) - return; + WARN_ON(to); /* should be none of these left */ - local_irq_save(flags); - - up = __raw_readl(base + 0x08); - up &= ~(1L << offs); - up |= to << offs; - __raw_writel(up, base + 0x08); + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ - local_irq_restore(flags); + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } } - EXPORT_SYMBOL(s3c2410_gpio_pullup); - void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long dat; + /* do this via gpiolib until all users removed */ - local_irq_save(flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offs); - dat |= to << offs; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); } EXPORT_SYMBOL(s3c2410_gpio_setpin); -- cgit v1.2.3-70-g09d2 From 9772b7586efb189ac2dcac1d6f7d09c6d879ac64 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 11:23:35 +0900 Subject: ARM: S3C24XX: Remove S3C2410_GPJ numbering Remove the old S3C2410_GPJ as we will be moving to the new gpiolib based driver code and these numbers will become invalid. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-gpioj.h | 19 ------------------- 1 file changed, 19 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h index de463bc17b5..50257571124 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -22,81 +22,62 @@ * pull up works like all other ports. */ -#define S3C2440_GPIO_BANKJ (416) - #define S3C2413_GPJCON S3C2410_GPIOREG(0x80) #define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) #define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) -#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) #define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) #define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) -#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) #define S3C2440_GPJ1_INP (0x00 << 2) #define S3C2440_GPJ1_OUTP (0x01 << 2) #define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) -#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) #define S3C2440_GPJ2_INP (0x00 << 4) #define S3C2440_GPJ2_OUTP (0x01 << 4) #define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) -#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) #define S3C2440_GPJ3_INP (0x00 << 6) #define S3C2440_GPJ3_OUTP (0x01 << 6) #define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) -#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) #define S3C2440_GPJ4_INP (0x00 << 8) #define S3C2440_GPJ4_OUTP (0x01 << 8) #define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) -#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) #define S3C2440_GPJ5_INP (0x00 << 10) #define S3C2440_GPJ5_OUTP (0x01 << 10) #define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) -#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) #define S3C2440_GPJ6_INP (0x00 << 12) #define S3C2440_GPJ6_OUTP (0x01 << 12) #define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) -#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) #define S3C2440_GPJ7_INP (0x00 << 14) #define S3C2440_GPJ7_OUTP (0x01 << 14) #define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) -#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) #define S3C2440_GPJ8_INP (0x00 << 16) #define S3C2440_GPJ8_OUTP (0x01 << 16) #define S3C2440_GPJ8_CAMPCLK (0x02 << 16) -#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) #define S3C2440_GPJ9_INP (0x00 << 18) #define S3C2440_GPJ9_OUTP (0x01 << 18) #define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) -#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) #define S3C2440_GPJ10_INP (0x00 << 20) #define S3C2440_GPJ10_OUTP (0x01 << 20) #define S3C2440_GPJ10_CAMHREF (0x02 << 20) -#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) #define S3C2440_GPJ11_INP (0x00 << 22) #define S3C2440_GPJ11_OUTP (0x01 << 22) #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) -#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) #define S3C2440_GPJ12_INP (0x00 << 24) #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) -#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) -#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) -#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) - #endif /* __ASM_ARCH_REGS_GPIOJ_H */ -- cgit v1.2.3-70-g09d2 From 1d3ef014b5fe959a789c2df708713d58c9491c3b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 11:32:14 +0900 Subject: ARM: S3C24XX: Remove _INP macros in Remove the _INP definitions, they are all zero and also unused Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/regs-gpioj.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h index 50257571124..19575e06111 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -27,55 +27,42 @@ #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) #define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) -#define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) #define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) -#define S3C2440_GPJ1_INP (0x00 << 2) #define S3C2440_GPJ1_OUTP (0x01 << 2) #define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) -#define S3C2440_GPJ2_INP (0x00 << 4) #define S3C2440_GPJ2_OUTP (0x01 << 4) #define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) -#define S3C2440_GPJ3_INP (0x00 << 6) #define S3C2440_GPJ3_OUTP (0x01 << 6) #define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) -#define S3C2440_GPJ4_INP (0x00 << 8) #define S3C2440_GPJ4_OUTP (0x01 << 8) #define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) -#define S3C2440_GPJ5_INP (0x00 << 10) #define S3C2440_GPJ5_OUTP (0x01 << 10) #define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) -#define S3C2440_GPJ6_INP (0x00 << 12) #define S3C2440_GPJ6_OUTP (0x01 << 12) #define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) -#define S3C2440_GPJ7_INP (0x00 << 14) #define S3C2440_GPJ7_OUTP (0x01 << 14) #define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) -#define S3C2440_GPJ8_INP (0x00 << 16) #define S3C2440_GPJ8_OUTP (0x01 << 16) #define S3C2440_GPJ8_CAMPCLK (0x02 << 16) -#define S3C2440_GPJ9_INP (0x00 << 18) #define S3C2440_GPJ9_OUTP (0x01 << 18) #define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) -#define S3C2440_GPJ10_INP (0x00 << 20) #define S3C2440_GPJ10_OUTP (0x01 << 20) #define S3C2440_GPJ10_CAMHREF (0x02 << 20) -#define S3C2440_GPJ11_INP (0x00 << 22) #define S3C2440_GPJ11_OUTP (0x01 << 22) #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) -#define S3C2440_GPJ12_INP (0x00 << 24) #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) -- cgit v1.2.3-70-g09d2 From fcef85c0c122f90f57f2f3ef0caeaf6404d6e8f3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 6 May 2010 15:42:23 +0900 Subject: ARM: SAMSUNG: Add spinlock locking to GPIO banks Add locking to each GPIO bank to allow for SMP capable code to use the gpiolib functions. See the gpio-core.h header file for more information. Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/gpio-config.c | 12 ++++++------ arch/arm/plat-samsung/gpio.c | 15 +++++++++------ arch/arm/plat-samsung/include/plat/gpio-core.h | 14 ++++++++++++++ 3 files changed, 29 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 3282db360fa..a76eef53339 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -33,9 +33,9 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setcfg(chip, offset, config); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } @@ -51,9 +51,9 @@ unsigned s3c_gpio_getcfg(unsigned int pin) if (chip) { offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_getcfg(chip, offset); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); } return ret; @@ -72,9 +72,9 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setpull(chip, offset, pull); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index 28d2ab8a08d..b83a83351ce 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -52,14 +53,14 @@ static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) unsigned long flags; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); con = __raw_readl(base + 0x00); con &= ~(3 << (offset * 2)); __raw_writel(con, base + 0x00); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -72,7 +73,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, unsigned long dat; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -87,7 +88,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, __raw_writel(con, base + 0x00); __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -99,7 +100,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, unsigned long flags; unsigned long dat; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -107,7 +108,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, dat |= 1 << offset; __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); } static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) @@ -131,6 +132,8 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) BUG_ON(!gc->label); BUG_ON(!gc->ngpio); + spin_lock_init(&chip->lock); + if (!gc->direction_input) gc->direction_input = s3c_gpiolib_input; if (!gc->direction_output) diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index f0584f26d49..f3a68d1a07b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -44,16 +44,26 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. + * + * The lock protects each gpio bank from multiple access of the shared + * configuration registers, or from reading of data whilst another thread + * is writing to the register set. + * + * Each chip has its own lock to avoid any contention between different + * CPU cores trying to get one lock for different GPIO banks, where each + * bank of GPIO has its own register space and configuration registers. */ struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; #endif @@ -138,3 +148,7 @@ extern struct s3c_gpio_pm s3c_gpio_pm_4bit; #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ + +/* locking wrappers to deal with multiple access to the same gpio bank */ +#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) -- cgit v1.2.3-70-g09d2 From a0026418d3d99b68dbd6c91f277d6f764fe41956 Mon Sep 17 00:00:00 2001 From: Vasily Khoruzhick Date: Wed, 12 May 2010 10:22:41 +0300 Subject: ARM: S3C244X: fix gpiolib port J support Increase GPIOs number for S3C244X, and make S3C_GPIO_END point to BANKJ end, otherwise gpiolib refuses to register BANKJ Signed-off-by: Vasily Khoruzhick [ben-linux@fluff.org: Move pm fix to new patch] Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-track.h | 2 +- arch/arm/mach-s3c2410/include/mach/gpio.h | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index acb25910380..6371eaa5fe4 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -23,7 +23,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) { struct s3c_gpio_chip *chip; - if (pin > S3C2410_GPG(10)) + if (pin > S3C_GPIO_END) return NULL; chip = &s3c24xx_gpios[pin/32]; diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 15f0b3e7ce6..b649bf2ccd5 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -20,10 +20,18 @@ * devices that need GPIO. */ +#ifdef CONFIG_CPU_S3C244X +#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) +#else #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) +#endif #include #include #include +#ifdef CONFIG_CPU_S3C24XX +#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32) +#else #define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) +#endif -- cgit v1.2.3-70-g09d2 From 2c8fcfbf735e2d3b139e4247eb3e73edf64bb23f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 17 May 2010 14:13:16 +0900 Subject: ARM: S3C24XX: Start cleanup of GPIO numbering Start cleaning up the numbering of GPIO banks by removing the old bank start definitions currently being used by some of the header files. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 5 ----- arch/arm/mach-s3c2412/gpio.c | 8 ++++---- 2 files changed, 4 insertions(+), 9 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index f3182ff847c..ad94e1ac246 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -16,12 +16,7 @@ #define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) #define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index f7afece7fc3..71c579349dd 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -33,14 +33,14 @@ int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) offs *= 2; - if (pin < S3C2410_GPIO_BANKB) + if (pin < S3C2410_GPB(0)) return -EINVAL; - if (pin >= S3C2410_GPIO_BANKF && - pin <= S3C2410_GPIO_BANKG) + if (pin >= S3C2410_GPF(0) && + pin <= S3C2410_GPG(16)) return -EINVAL; - if (pin > (S3C2410_GPIO_BANKH + 32)) + if (pin > S3C2410_GPH(16)) return -EINVAL; local_irq_save(flags); -- cgit v1.2.3-70-g09d2 From 7987bd7a7051c979f7b9b572898f92dbef6aaeb1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 17 May 2010 14:28:44 +0900 Subject: ARM: S3C24XX: Update missed gpio calls to use gpiolib Update a couple of S3C24XX and S3C2412 files that are still using the GPIO number to register mapping calls to get the s3c_gpio_chip and use the base field from that. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2412/gpio.c | 12 +++++++----- arch/arm/plat-s3c24xx/gpio.c | 8 +++++--- 2 files changed, 12 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index 71c579349dd..3404a876b33 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -16,18 +16,20 @@ #include #include #include +#include #include #include #include - #include +#include + int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; unsigned long flags; unsigned long slpcon; @@ -45,12 +47,12 @@ int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) local_irq_save(flags); - slpcon = __raw_readl(base + 0x0C); + slpcon = __raw_readl(chip->base + 0x0C); slpcon &= ~(3 << offs); slpcon |= state << offs; - __raw_writel(slpcon, base + 0x0C); + __raw_writel(slpcon, chip->base + 0x0C); local_irq_restore(flags); diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 45126d3aafc..2f3d7c089df 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -34,6 +34,8 @@ #include +#include + /* gpiolib wrappers until these are totally eliminated */ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) @@ -68,10 +70,10 @@ EXPORT_SYMBOL(s3c2410_gpio_setpin); unsigned int s3c2410_gpio_getpin(unsigned int pin) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; - return __raw_readl(base + 0x04) & (1<< offs); + return __raw_readl(chip->base + 0x04) & (1<< offs); } EXPORT_SYMBOL(s3c2410_gpio_getpin); -- cgit v1.2.3-70-g09d2 From 1635ca4aaf835794401da33079e50ce1d6bbb5d0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 17 May 2010 14:53:48 +0900 Subject: ARM: S3C24XX: Remove macros mapping GPIO number to base As part of the cleanup, remove the old macros mapping GPIO numbers to the base of the register now we have gpiolib to manage the GPIO mappings for us. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 1 - arch/arm/mach-s3c2410/include/mach/gpio-track.h | 2 +- arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 22 ++-------------------- 3 files changed, 3 insertions(+), 22 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index ad94e1ac246..ad4a04acf67 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -16,7 +16,6 @@ #define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) -#define S3C2410_GPIO_BANKC (32*2) #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index 6371eaa5fe4..d67819dde42 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -27,7 +27,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; + return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 821b966bf05..95e29fefec3 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -17,29 +17,11 @@ #include #ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2400_MISCCR +#define S3C24XX_MISCCR S3C2400_MISCCR #else -#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) +#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) #endif /* CONFIG_CPU_S3C2400 */ - -/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ - -#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) -#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) -#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ - (2 * (S3C2400_BANKNUM(pin)-2))) - -#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ - S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ - S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) - - -#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) -#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) - /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -- cgit v1.2.3-70-g09d2 From 4ac2a39767c2a93c06b654a0bf1c635e03ff75ac Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 17 May 2010 15:12:33 +0900 Subject: ARM: S3C24XX: Add note on GPIO bank sizes Add a table for the GPIO bank sizes for each SoC Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index ad4a04acf67..4f7bf3272e8 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -19,6 +19,25 @@ #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) +/* GPIO sizes for various SoCs: + * + * 2442 + * 2410 2412 2440 2443 2416 + * ---- ---- ---- ---- ---- + * A 23 22 25 16 25 + * B 11 11 11 11 9 + * C 16 15 16 16 16 + * D 16 16 16 16 16 + * E 16 16 16 16 16 + * F 8 8 8 8 8 + * G 16 16 16 16 8 + * H 11 11 9 15 15 + * J -- -- 13 16 -- + * K -- -- -- -- 16 + * L -- -- -- 15 7 + * M -- -- -- 2 2 + */ + /* GPIO bank sizes */ #define S3C2410_GPIO_A_NR (32) #define S3C2410_GPIO_B_NR (32) -- cgit v1.2.3-70-g09d2 From 32b6cb3872883861f3a2669cce880f3a7ef8979a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 18 May 2010 19:07:05 +0900 Subject: ARM: SAMSUNG: Fix additional increment when running through gpios The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios field and the bank-bank offset inside the loop, and also in the for() loop with a ++. Remove the ++, as the number is already at the next GPIO, thus ensuring that we don't skip a gpio bank by accident. Signed-off-by: Ben Dooks --- arch/arm/plat-samsung/pm-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 69a4c7f02e2..d50ab9d2af5 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -329,7 +329,7 @@ void s3c_pm_save_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; @@ -367,7 +367,7 @@ void s3c_pm_restore_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; -- cgit v1.2.3-70-g09d2