From 6bd1fbea2e8bff9346a5afb44ca948b4e4ed74a5 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 9 Sep 2009 10:46:19 +0000 Subject: Blackfin: move on-chip UART resources to boards files Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 100 ++++++++++++++++++++++++++++---- 1 file changed, 90 insertions(+), 10 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ac9b52e0087..9842288c4f1 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1157,30 +1157,105 @@ static struct platform_device bfin_lq035q1_device = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) -static struct resource bfin_uart_resources[] = { #ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { { - .start = 0xFFC00400, - .end = 0xFFC004FF, + .start = UART0_THR, + .end = UART0_GCTL+2, .flags = IORESOURCE_MEM, }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_ERROR, + .end = IRQ_UART0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin */ + .start = GPIO_PG7, + .end = GPIO_PG7, + .flags = IORESOURCE_IO, + }, + { /* RTS pin */ + .start = GPIO_PG6, + .end = GPIO_PG6, + .flags = IORESOURCE_IO, + }, +#endif +}; + +unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; #endif #ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { { - .start = 0xFFC02000, - .end = 0xFFC020FF, + .start = UART1_THR, + .end = UART1_GCTL+2, .flags = IORESOURCE_MEM, }, -#endif + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_ERROR, + .end = IRQ_UART1_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, 0 }; -static struct platform_device bfin_uart_device = { +static struct platform_device bfin_uart1_device = { .name = "bfin-uart", .id = 1, - .num_resources = ARRAY_SIZE(bfin_uart_resources), - .resource = bfin_uart_resources, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -1771,7 +1846,12 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) - &bfin_uart_device, +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif #endif #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) -- cgit v1.2.3-70-g09d2 From 08a54bffaf7d5dc9391518323234ce9f9ea4be8e Mon Sep 17 00:00:00 2001 From: Barry Song Date: Fri, 18 Sep 2009 09:14:38 +0000 Subject: Blackfin: bf537-stamp: ad1938: switch to GPIO CS Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9842288c4f1..554f82d6f9d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -528,7 +528,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { static struct bfin5xx_spi_chip ad1938_spi_chip_info = { .enable_dma = 0, .bits_per_word = 8, - .cs_gpio = GPIO_PF5, }; #endif @@ -910,7 +909,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .modalias = "ad1938", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */ + .chip_select = 5, .controller_data = &ad1938_spi_chip_info, .mode = SPI_MODE_3, }, -- cgit v1.2.3-70-g09d2 From df5de261306d9bfc1ed9121595593b10a7626b95 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 23 Sep 2009 05:01:56 +0000 Subject: Blackfin: move SPORT UART resources to boards files Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 63 +++++++++++ arch/blackfin/mach-bf527/boards/cm_bf527.c | 63 +++++++++++ arch/blackfin/mach-bf527/boards/ezbrd.c | 63 +++++++++++ arch/blackfin/mach-bf527/boards/ezkit.c | 63 +++++++++++ arch/blackfin/mach-bf533/boards/blackstamp.c | 63 +++++++++++ arch/blackfin/mach-bf533/boards/cm_bf533.c | 63 +++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 63 +++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537e.c | 63 +++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537u.c | 63 +++++++++++ arch/blackfin/mach-bf537/boards/minotaur.c | 63 +++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 67 +++++++++++- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 63 +++++++++++ arch/blackfin/mach-bf538/boards/ezkit.c | 154 +++++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/cm_bf548.c | 154 +++++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 154 +++++++++++++++++++++++++++ 15 files changed, 1220 insertions(+), 2 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 0d1b021ffa6..06e4316912d 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -562,16 +562,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -678,9 +737,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 2d93c1f520a..3543bdf3268 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -800,16 +800,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -926,9 +985,13 @@ static struct platform_device *cmbf527_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 3a981e85566..a99955d1139 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -631,16 +631,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -766,9 +825,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 0750e655fb2..f93323dd5b5 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -844,16 +844,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -1007,9 +1066,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 50ce3ecfdcb..4d9294642f1 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -270,16 +270,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -385,9 +444,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index f707faf8a86..33ff27a4a47 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -317,16 +317,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) static struct resource isp1362_hcd_resources[] = { @@ -473,9 +532,13 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 2683e5f2294..428f724dd08 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -397,16 +397,75 @@ static struct platform_device bfin_sir0_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include @@ -536,9 +595,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index abb32ddc512..b4837776b27 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -526,16 +526,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -647,9 +706,13 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index b3182face95..c6802be65fb 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -491,16 +491,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -612,9 +671,13 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 58d6a20e7a0..6403964490d 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -377,16 +377,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif static struct platform_device *minotaur_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -433,9 +492,13 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 554f82d6f9d..df4b6b5c08d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1677,16 +1677,75 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE @@ -1867,9 +1926,13 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, @@ -1895,10 +1958,10 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - i2c_register_board_info(0, bfin_i2c_board_info, - ARRAY_SIZE(bfin_i2c_board_info)); bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index d77ca5b7568..69a2fb80472 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -493,16 +493,75 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 }; static struct platform_device bfin_sport1_uart_device = { .name = "bfin-sport-uart", .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, }; #endif +#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static struct platform_device bfin_mii_bus = { @@ -614,9 +673,13 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART &bfin_sport1_uart_device, #endif +#endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) &isp1362_hcd_device, diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 1912bc4555a..d7c6b9f18b5 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -262,6 +262,145 @@ static struct platform_device bfin_sir2_device = { #endif #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -767,6 +906,21 @@ static struct platform_device *cm_bf538_devices[] __initdata = { #endif #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) &bfin_can_device, #endif diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 635f92723e1..cb745879219 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -526,6 +526,145 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) static struct resource bfin_atapi_resources[] = { { @@ -960,6 +1099,21 @@ static struct platform_device *cm_bf548_devices[] __initdata = { &musb_device, #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) &bfin_atapi_device, #endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 1ed02615773..97033fea102 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -631,6 +631,145 @@ static struct platform_device musb_device = { }; #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +static struct resource bfin_sport3_uart_resources[] = { + { + .start = SPORT3_TCR1, + .end = SPORT3_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT3_RX, + .end = IRQ_SPORT3_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT3_ERROR, + .end = IRQ_SPORT3_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +unsigned short bfin_sport3_peripherals[] = { + P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0 +}; + +static struct platform_device bfin_sport3_uart_device = { + .name = "bfin-sport-uart", + .id = 3, + .num_resources = ARRAY_SIZE(bfin_sport3_uart_resources), + .resource = bfin_sport3_uart_resources, + .dev = { + .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) unsigned short bfin_can_peripherals[] = { P_CAN0_RX, P_CAN0_TX, 0 @@ -1172,6 +1311,21 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_isp1760_device, #endif +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif + #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) &bfin_can_device, #endif -- cgit v1.2.3-70-g09d2 From c13ce9fd26c3a0e32b3bf0b00929181e66114ed2 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 23 Sep 2009 09:37:46 +0000 Subject: Blackfin: add UART/SPORT early platform resources This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/boards/ezbrd.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf527/boards/cm_bf527.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf527/boards/ezbrd.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf527/boards/ezkit.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf533/boards/H8606.c | 15 +++++++++++ arch/blackfin/mach-bf533/boards/blackstamp.c | 24 +++++++++++++++++ arch/blackfin/mach-bf533/boards/cm_bf533.c | 24 +++++++++++++++++ arch/blackfin/mach-bf533/boards/ezkit.c | 15 +++++++++++ arch/blackfin/mach-bf533/boards/ip0x.c | 15 +++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 24 +++++++++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537e.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537u.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf537/boards/minotaur.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf537/boards/pnav10.c | 18 +++++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 28 ++++++++++++++++++++ arch/blackfin/mach-bf537/boards/tcm_bf537.c | 27 +++++++++++++++++++ arch/blackfin/mach-bf538/boards/ezkit.c | 36 +++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/cm_bf548.c | 39 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 39 ++++++++++++++++++++++++++++ arch/blackfin/mach-bf561/boards/cm_bf561.c | 15 +++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 15 +++++++++++ arch/blackfin/mach-bf561/boards/tepla.c | 15 +++++++++++ 22 files changed, 538 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 06e4316912d..44d6d529902 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -775,6 +775,33 @@ static int __init ezbrd_init(void) arch_initcall(ezbrd_init); +static struct platform_device *ezbrd_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezbrd_early_devices, + ARRAY_SIZE(ezbrd_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 3543bdf3268..eaa0131f960 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -1014,6 +1014,33 @@ static int __init cm_init(void) arch_initcall(cm_init); +static struct platform_device *cmbf527_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cmbf527_early_devices, + ARRAY_SIZE(cmbf527_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index a99955d1139..3ff61e6fbe9 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -854,6 +854,33 @@ static int __init ezbrd_init(void) arch_initcall(ezbrd_init); +static struct platform_device *ezbrd_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezbrd_early_devices, + ARRAY_SIZE(ezbrd_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index f93323dd5b5..6138b47fbba 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -1099,6 +1099,33 @@ static int __init ezkit_init(void) arch_initcall(ezkit_init); +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index cb3b74f3234..d10c8e8b69c 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -455,3 +455,18 @@ static int __init H8606_init(void) } arch_initcall(H8606_init); + +static struct platform_device *H8606_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(H8606_early_devices, + ARRAY_SIZE(H8606_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 4d9294642f1..842b4fa76ea 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -486,3 +486,27 @@ static int __init blackstamp_init(void) } arch_initcall(blackstamp_init); + +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 33ff27a4a47..0592fe0bb8a 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -580,3 +580,27 @@ static int __init cm_bf533_init(void) } arch_initcall(cm_bf533_init); + +static struct platform_device *cm_bf533_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf533_early_devices, + ARRAY_SIZE(cm_bf533_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 50392476722..5332c9828a3 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -531,3 +531,18 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index a60d0369ceb..7349970db97 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -308,3 +308,18 @@ static int __init ip0x_init(void) } arch_initcall(ip0x_init); + +static struct platform_device *ip0x_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ip0x_early_devices, + ARRAY_SIZE(ip0x_early_devices)); +} diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 428f724dd08..3e80a795d3c 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -642,6 +642,30 @@ static int __init stamp_init(void) arch_initcall(stamp_init); +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround pull up on cpld / flash pin not being strong enough */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index b4837776b27..c54331282ba 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -760,6 +760,33 @@ static int __init cm_bf537e_init(void) arch_initcall(cm_bf537e_init); +static struct platform_device *cm_bf537e_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537e_early_devices, + ARRAY_SIZE(cm_bf537e_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index c6802be65fb..18daacb00b2 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -725,6 +725,33 @@ static int __init cm_bf537u_init(void) arch_initcall(cm_bf537u_init); +static struct platform_device *cm_bf537u_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537u_early_devices, + ARRAY_SIZE(cm_bf537u_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 6403964490d..c489d602c59 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -516,6 +516,33 @@ static int __init minotaur_init(void) arch_initcall(minotaur_init); +static struct platform_device *minotaur_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(minotaur_early_devices, + ARRAY_SIZE(minotaur_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 3c36abdf340..f08533d4aee 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -571,6 +571,24 @@ static int __init pnav_init(void) arch_initcall(pnav_init); +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index df4b6b5c08d..3cb20d7efbd 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1969,6 +1969,34 @@ static int __init stamp_init(void) arch_initcall(stamp_init); + +static struct platform_device *stamp_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(stamp_early_devices, + ARRAY_SIZE(stamp_early_devices)); +} + void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 69a2fb80472..59951cdef58 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -727,6 +727,33 @@ static int __init tcm_bf537_init(void) arch_initcall(tcm_bf537_init); +static struct platform_device *cm_bf537_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf537_early_devices, + ARRAY_SIZE(cm_bf537_early_devices)); +} + void bfin_get_ether_addr(char *addr) { random_ether_addr(addr); diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index d7c6b9f18b5..20387fe09c6 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -956,3 +956,39 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index cb745879219..f60c333fec6 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -1165,3 +1165,42 @@ static int __init cm_bf548_init(void) } arch_initcall(cm_bf548_init); + +static struct platform_device *cm_bf548_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf548_early_devices, + ARRAY_SIZE(cm_bf548_early_devices)); +} diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 97033fea102..b5d8ea18773 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -1390,3 +1390,42 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART2 + &bfin_uart2_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART3 + &bfin_uart3_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART + &bfin_sport3_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 818266f6348..37dd37523ad 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -547,3 +547,18 @@ static int __init cm_bf561_init(void) } arch_initcall(cm_bf561_init); + +static struct platform_device *cm_bf561_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(cm_bf561_early_devices, + ARRAY_SIZE(cm_bf561_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index c59041c513e..c7a5db79f83 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -489,3 +489,18 @@ static int __init ezkit_init(void) } arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index 6c33397355b..d3017e53686 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -140,3 +140,18 @@ static int __init tepla_init(void) } arch_initcall(tepla_init); + +static struct platform_device *tepla_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(tepla_early_devices, + ARRAY_SIZE(tepla_early_devices)); +} -- cgit v1.2.3-70-g09d2 From d94a1aa44ed6bfe8d8ab36c02de652d4fcf0d2c3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 8 Dec 2009 11:45:55 +0000 Subject: Blackfin: extend bfin-lq035q1-fb resources to include PPI mode This lets us support the new BF527-EZKIT V2.1 via platform resources tweaks only. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/bfin-lq035q1.h | 12 ++++++++++++ arch/blackfin/mach-bf527/boards/ezbrd.c | 7 ++++--- arch/blackfin/mach-bf527/boards/ezkit.c | 1 + arch/blackfin/mach-bf537/boards/stamp.c | 11 ++++++----- arch/blackfin/mach-bf538/boards/ezkit.c | 7 ++++--- 5 files changed, 27 insertions(+), 11 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/include/asm/bfin-lq035q1.h b/arch/blackfin/include/asm/bfin-lq035q1.h index 57bc21ac229..836895156b5 100644 --- a/arch/blackfin/include/asm/bfin-lq035q1.h +++ b/arch/blackfin/include/asm/bfin-lq035q1.h @@ -8,6 +8,9 @@ #ifndef BFIN_LQ035Q1_H #define BFIN_LQ035Q1_H +/* + * LCD Modes + */ #define LQ035_RL (0 << 8) /* Right -> Left Scan */ #define LQ035_LR (1 << 8) /* Left -> Right Scan */ #define LQ035_TB (1 << 9) /* Top -> Botton Scan */ @@ -17,9 +20,18 @@ #define LQ035_NORM (1 << 13) /* Reversal */ #define LQ035_REV (0 << 13) /* Reversal */ +/* + * PPI Modes + */ + +#define USE_RGB565_16_BIT_PPI 1 +#define USE_RGB565_8_BIT_PPI 2 +#define USE_RGB888_8_BIT_PPI 3 + struct bfin_lq035q1fb_disp_info { unsigned mode; + unsigned ppi_mode; /* GPIOs */ int use_bl; unsigned gpio_bl; diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 3ff61e6fbe9..faede2b964b 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -749,9 +749,10 @@ static struct platform_device bfin_dpmc = { #include static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 1, - .gpio_bl = GPIO_PG12, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 1, + .gpio_bl = GPIO_PG12, }; static struct resource bfin_lq035q1_resources[] = { diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9db506bdf4f..fdfe8cae49b 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -154,6 +154,7 @@ static struct platform_device bf52x_t350mcqb_device = { static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_8_BIT_PPI, }; static struct resource bfin_lq035q1_resources[] = { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 3cb20d7efbd..538bff83e60 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1131,9 +1131,10 @@ static struct platform_device bfin_fb_device = { #include static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 0, /* let something else control the LCD Blacklight */ - .gpio_bl = GPIO_PF7, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, }; static struct resource bfin_lq035q1_resources[] = { @@ -1147,8 +1148,8 @@ static struct resource bfin_lq035q1_resources[] = { static struct platform_device bfin_lq035q1_device = { .name = "bfin-lq035q1", .id = -1, - .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), - .resource = bfin_lq035q1_resources, + .num_resources = ARRAY_SIZE(bfin_lq035q1_resources), + .resource = bfin_lq035q1_resources, .dev = { .platform_data = &bfin_lq035q1_data, }, diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 20387fe09c6..d2d06f046ad 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -534,9 +534,10 @@ static struct bfin5xx_spi_chip spi_ad7879_chip_info = { #include static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = { - .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, - .use_bl = 0, /* let something else control the LCD Blacklight */ - .gpio_bl = GPIO_PF7, + .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB, + .ppi_mode = USE_RGB565_16_BIT_PPI, + .use_bl = 0, /* let something else control the LCD Blacklight */ + .gpio_bl = GPIO_PF7, }; static struct resource bfin_lq035q1_resources[] = { -- cgit v1.2.3-70-g09d2 From 244d34230b7447fba95221dbf39b39e94257939c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 18 Dec 2009 09:29:39 +0000 Subject: Blackfin: update AD7879 resources to match the new gpiolib driver support Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/boards/ezbrd.c | 4 ++-- arch/blackfin/mach-bf527/boards/ezkit.c | 3 +-- arch/blackfin/mach-bf537/boards/stamp.c | 4 ++-- arch/blackfin/mach-bf538/boards/ezkit.c | 4 ++-- 4 files changed, 7 insertions(+), 8 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index faede2b964b..55069af4f67 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -274,8 +274,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index fdfe8cae49b..0cc3581e646 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -521,8 +521,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 0, /* Export GPIO to gpiolib */ }; #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 538bff83e60..03e36bd6fd0 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -705,8 +705,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index d2d06f046ad..1a1f65855b0 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -518,8 +518,8 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .median = 2, /* do 8 measurements */ .averaging = 1, /* take the average of 4 middle samples */ .pen_down_acc_interval = 255, /* 9.4 ms */ - .gpio_output = 1, /* configure AUX/VBAT/GPIO as GPIO output */ - .gpio_default = 1, /* During initialization set GPIO = HIGH */ + .gpio_export = 1, /* Export GPIO to gpiolib */ + .gpio_base = -1, /* Dynamic allocation */ }; #endif -- cgit v1.2.3-70-g09d2 From 01218654cd97a1e970034b1e080ec5459172c3f6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 21 Dec 2009 15:07:43 +0000 Subject: Blackfin: bf537-stamp: change CONFIG_USB_SL811_BFIN_IRQ to IRQ_PF4 The Kconfig option was never mainlined, so replace the define with the actual pin that it is hooked up to by default. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 03e36bd6fd0..34022367f51 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -208,8 +208,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = CONFIG_USB_SL811_BFIN_IRQ, - .end = CONFIG_USB_SL811_BFIN_IRQ, + .start = IRQ_PF4, + .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; -- cgit v1.2.3-70-g09d2 From 7a9cc48907e05e61033b953a3860e55703625950 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 22 Dec 2009 04:47:04 +0000 Subject: Blackfin: bf537-stamp: unify duplicated ADP5588 headers Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 34022367f51..27b9c9ce8d0 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -20,10 +20,11 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include #endif +#include +#include #include #include #include -#include #include #include #include @@ -1335,7 +1336,6 @@ static struct platform_device i2c_bfin_twi_device = { #endif #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE) -#include static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = { [0] = KEY_GRAVE, [1] = KEY_1, @@ -1532,7 +1532,6 @@ static struct adp5520_platform_data adp5520_pdev_data = { #endif #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE) -#include static struct adp5588_gpio_platform_data adp5588_gpio_data = { .gpio_start = 50, .pullup_dis_mask = 0, -- cgit v1.2.3-70-g09d2 From 29bb3bc0c71d867d50b18a0277bf28cd8dd3fca7 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Thu, 14 Jan 2010 08:28:38 +0000 Subject: Blackfin: bf527-ezkit/bf537-stamp: add example SSM2602 I2C resources Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/boards/ezkit.c | 5 +++++ arch/blackfin/mach-bf537/boards/stamp.c | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index a7beed517c2..9f2cb2b8652 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -905,6 +905,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&adp5520_pdev_data, }, #endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 27b9c9ce8d0..d47f4ed6b93 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1674,6 +1674,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("ad5258", 0x18), }, #endif +#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE) + { + I2C_BOARD_INFO("ssm2602", 0x1b), + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -- cgit v1.2.3-70-g09d2 From 38e7673f24e6c19aba9ecff86760cb7981b91464 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Fri, 15 Jan 2010 03:24:39 +0000 Subject: Blackfin: bf537-stamp: declare parallel flash as ROM with XIP kernel When the kernel is executing out of parallel flash (XIP), we can't have the flash go into an erase/programming cycle, otherwise the instruction fetching steps fail and everything crashes. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index d47f4ed6b93..26429702db5 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -455,6 +455,9 @@ static struct physmap_flash_data stamp_flash_data = { .width = 2, .parts = stamp_partitions, .nr_parts = ARRAY_SIZE(stamp_partitions), +#ifdef CONFIG_ROMKERNEL + .probe_type = "map_rom", +#endif }; static struct resource stamp_flash_resource = { -- cgit v1.2.3-70-g09d2 From 0531c467da6438f278e9420a30f73eea2fdb73bd Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Jan 2010 07:04:29 +0000 Subject: Blackfin: bf537-stamp: move ADF7021 MAC storage into platform resources Just generate a random MAC on the demo board since the ADF702x lacks dedicated storage for such things. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 26429702db5..f78861a617d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -22,6 +22,7 @@ #endif #include #include +#include #include #include #include @@ -816,6 +817,12 @@ static struct adf702x_platform_data adf7021_platform_data = { .adf702x_regs = adf7021_regs, .tx_reg = TXREG, }; +static inline void adf702x_mac_init(void) +{ + random_ether_addr(adf7021_platform_data.mac_addr); +} +#else +static inline void adf702x_mac_init(void) {} #endif #if defined(CONFIG_MTD_DATAFLASH) \ @@ -1967,6 +1974,7 @@ static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); bfin_plat_nand_init(); + adf702x_mac_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -- cgit v1.2.3-70-g09d2 From 336746ed8ee8ef503ba79bc4b6f0b5a40e8ab3ce Mon Sep 17 00:00:00 2001 From: Barry Song Date: Tue, 13 Oct 2009 09:19:18 +0000 Subject: Blackfin: bf537-stamp/bf527-ezkit: move ASoC SPORT resources to boards file Rather than declaring pin resources in the drivers, do it in the board. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/boards/ezkit.c | 24 ++++++++++++++++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 25 +++++++++++++++++++++++++ 2 files changed, 49 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9f2cb2b8652..3d32a35427a 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -494,6 +494,22 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +static struct platform_device bfin_tdm = { + .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) static struct bfin5xx_spi_chip lq035q1_spi_chip_info = { .enable_dma = 0, @@ -1152,6 +1168,14 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &ezkit_flash_device, #endif + +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + +#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_tdm, +#endif }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index f78861a617d..80b3b577f74 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1849,9 +1849,26 @@ static struct platform_device bfin_dpmc = { }, }; +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) static struct platform_device bfin_tdm = { .name = "bfin-tdm", + .id = CONFIG_SND_BF5XX_SPORT_NUM, + /* TODO: add platform data here */ +}; +#endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +static struct platform_device bfin_ac97 = { + .name = "bfin-ac97", + .id = CONFIG_SND_BF5XX_SPORT_NUM, /* TODO: add platform data here */ }; #endif @@ -1965,9 +1982,17 @@ static struct platform_device *stamp_devices[] __initdata = { &stamp_flash_device, #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) + &bfin_i2s, +#endif + #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) &bfin_tdm, #endif + +#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_ac97, +#endif }; static int __init stamp_init(void) -- cgit v1.2.3-70-g09d2 From 3b82790c12f8122d3df07cc387d2d74355e54c75 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 27 Jan 2010 09:01:36 +0000 Subject: Blackfin: rename AD1938 to AD193X in board files The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 80b3b577f74..2e354b5c18e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -528,8 +528,8 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) static struct bfin5xx_spi_chip ad1938_spi_chip_info = { .enable_dma = 0, .bits_per_word = 8, @@ -915,9 +915,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE) { - .modalias = "ad1938", + .modalias = "ad193x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 5, -- cgit v1.2.3-70-g09d2 From ad6720c0b52ae1cde0bc567e57a71acde1a292aa Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 3 Feb 2010 09:15:31 +0000 Subject: Blackfin: bf537-stamp: add example AD715{0,2}/AD774{5,6,7} IIO resources Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 2e354b5c18e..9bc7bd3f35f 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1608,6 +1608,26 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&ad7142_i2c_platform_data, }, #endif + +#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE) + { + I2C_BOARD_INFO("ad7150", 0x48), + .irq = IRQ_PG5, /* fixme: use real interrupt number */ + }, +#endif + +#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE) + { + I2C_BOARD_INFO("ad7152", 0x48), + }, +#endif + +#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE) + { + I2C_BOARD_INFO("ad774x", 0x48), + }, +#endif + #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), -- cgit v1.2.3-70-g09d2 From fe5b25c09873faee44077ee6ff8f23eee61b0fa0 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Thu, 4 Feb 2010 14:41:39 +0000 Subject: Blackfin: bf537-stamp: add example ADS7846 touchscreen resources Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 36 ++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9bc7bd3f35f..7a1d645bbfb 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -825,6 +825,29 @@ static inline void adf702x_mac_init(void) static inline void adf702x_mac_init(void) {} #endif +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +static struct bfin5xx_spi_chip ad7873_spi_chip_info = { + .bits_per_word = 8, +}; + +static int ads7873_get_pendown_state(void) +{ + return gpio_get_value(GPIO_PF6); +} + +static struct ads7846_platform_data __initdata ad7873_pdata = { + .model = 7873, /* AD7873 */ + .x_max = 0xfff, + .y_max = 0xfff, + .x_plate_ohms = 620, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7873_get_pendown_state, +}; +#endif + #if defined(CONFIG_MTD_DATAFLASH) \ || defined(CONFIG_MTD_DATAFLASH_MODULE) @@ -1026,7 +1049,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_0, }, #endif - +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .irq = IRQ_PF6, + .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */ + .controller_data = &ad7873_spi_chip_info, + .platform_data = &ad7873_pdata, + .mode = SPI_MODE_0, + }, +#endif }; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -- cgit v1.2.3-70-g09d2 From f32792d045e1bbd86c0af0a28a46ae87af1ae100 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 9 Feb 2010 02:47:09 +0000 Subject: Blackfin: bf537-stamp: add example AD5398 power regulator resources Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 74 +++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 7a1d645bbfb..84562926029 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -35,6 +35,11 @@ #include #include #include +#ifdef CONFIG_REGULATOR_AD5398 +#include +#endif +#include +#include /* * Name the Board for the /proc/cpuinfo @@ -1634,6 +1639,59 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +static struct regulator_consumer_supply ad5398_consumer = { + .supply = "current", +}; + +static struct regulator_init_data ad5398_regulator_data = { + .constraints = { + .name = "current range", + .max_uA = 120000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &ad5398_consumer, +}; + +static struct ad5398_platform_data ad5398_i2c_platform_data = { + .current_bits = 10, + .current_offset = 4, + .regulator_data = &ad5398_regulator_data, +}; + +#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ + defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) +static struct platform_device ad5398_virt_consumer_device = { + .name = "reg-virt-consumer", + .id = 0, + .dev = { + .platform_data = "current", /* Passed to driver */ + }, +}; +#endif +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +static struct regulator_bulk_data ad5398_bulk_data = { + .supply = "current", +}; + +static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = { + .name = "ad5398", + .num_supplies = 1, + .supplies = &ad5398_bulk_data, +}; + +static struct platform_device ad5398_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &ad5398_userspace_comsumer_data, + }, +}; +#endif +#endif + static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE) { @@ -1743,6 +1801,12 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("ssm2602", 0x1b), }, #endif +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) + { + I2C_BOARD_INFO("ad5398", 0xC), + .platform_data = (void *)&ad5398_i2c_platform_data, + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) @@ -2047,6 +2111,16 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) &bfin_ac97, #endif +#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) +#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ + defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) + &ad5398_virt_consumer_device, +#endif +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) + &ad5398_userspace_consumer_device, +#endif +#endif }; static int __init stamp_init(void) -- cgit v1.2.3-70-g09d2 From f5f9531c7e588ee62e3aeddb14613ea80e7c2ca2 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Wed, 10 Feb 2010 07:15:59 +0000 Subject: Blackfin: bf537-stamp: add example AD2S90 resources Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 84562926029..4a09ce90ca4 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -653,6 +653,13 @@ static struct ad714x_platform_data ad7142_i2c_platform_data = { }; #endif +#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) +static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 @@ -967,6 +974,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE) + { + .modalias = "ad2s90", + .bus_num = 0, + .chip_select = 3, /* change it for your board */ + .platform_data = NULL, + .controller_data = &ad2s90_spi_chip_info, + }, +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", -- cgit v1.2.3-70-g09d2 From f8e6dbffa7a6cb3da3bcaf1fde3039896e1ac764 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 10 Feb 2010 09:09:05 +0000 Subject: Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 99 +++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 4a09ce90ca4..5f189518697 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -35,6 +35,9 @@ #include #include #include +#ifdef CONFIG_REGULATOR_ADP_SWITCH +#include +#endif #ifdef CONFIG_REGULATOR_AD5398 #include #endif @@ -2008,6 +2011,93 @@ static struct platform_device bfin_ac97 = { }; #endif +#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE) +#define REGULATOR_ADP122 "adp122" +#define REGULATOR_ADP150 "adp150" + +static struct regulator_consumer_supply adp122_consumers = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_consumer_supply adp150_consumers = { + .supply = REGULATOR_ADP150, +}; + +static struct regulator_init_data adp_switch_regulator_data[] = { + { + .constraints = { + .name = REGULATOR_ADP122, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, /* only 1 */ + .consumer_supplies = &adp122_consumers, + .driver_data = (void *)GPIO_PF2, /* gpio port only */ + }, + { + .constraints = { + .name = REGULATOR_ADP150, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, /* only 1 */ + .consumer_supplies = &adp150_consumers, + .driver_data = (void *)GPIO_PF3, /* gpio port only */ + }, +}; + +static struct adp_switch_platform_data adp_switch_pdata = { + .regulator_num = ARRAY_SIZE(adp_switch_regulator_data), + .regulator_data = adp_switch_regulator_data, +}; + +static struct platform_device adp_switch_device = { + .name = "adp_switch", + .id = 0, + .dev = { + .platform_data = &adp_switch_pdata, + }, +}; + +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) +static struct regulator_bulk_data adp122_bulk_data = { + .supply = REGULATOR_ADP122, +}; + +static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = { + .name = REGULATOR_ADP122, + .num_supplies = 1, + .supplies = &adp122_bulk_data, +}; + +static struct platform_device adp122_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 0, + .dev = { + .platform_data = &adp122_userspace_comsumer_data, + }, +}; + +static struct regulator_bulk_data adp150_bulk_data = { + .supply = REGULATOR_ADP150, +}; + +static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = { + .name = REGULATOR_ADP150, + .num_supplies = 1, + .supplies = &adp150_bulk_data, +}; + +static struct platform_device adp150_userspace_consumer_device = { + .name = "reg-userspace-consumer", + .id = 1, + .dev = { + .platform_data = &adp150_userspace_comsumer_data, + }, +}; +#endif +#endif + + static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, @@ -2138,6 +2228,15 @@ static struct platform_device *stamp_devices[] __initdata = { &ad5398_userspace_consumer_device, #endif #endif + +#if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE) + &adp_switch_device, +#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \ + defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE) + &adp122_userspace_consumer_device, + &adp150_userspace_consumer_device, +#endif +#endif }; static int __init stamp_init(void) -- cgit v1.2.3-70-g09d2 From c48d767569ec6449277bf4248295b4c165b57159 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Thu, 11 Feb 2010 09:27:18 +0000 Subject: Blackfin: bf537-stamp: add example ADAU1361 resources Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 5f189518697..8a138f0f030 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1811,6 +1811,11 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { I2C_BOARD_INFO("adau1761", 0x38), }, #endif +#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE) + { + I2C_BOARD_INFO("adau1361", 0x38), + }, +#endif #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE) { I2C_BOARD_INFO("ad5258", 0x18), -- cgit v1.2.3-70-g09d2 From df6a949b4666780969fd90a2f3ac3db3b62552d6 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Sun, 21 Feb 2010 10:23:07 +0000 Subject: Blackfin: bf537-stamp: add example AD2S120x resources Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 8a138f0f030..283cc66f022 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -663,6 +663,18 @@ static struct bfin5xx_spi_chip ad2s90_spi_chip_info = { }; #endif +#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) +unsigned short ad2s120x_platform_data[] = { + /* used as SAMPLE and RDVEL */ + GPIO_PF5, GPIO_PF6, 0 +}; + +static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 @@ -987,6 +999,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE) + { + .modalias = "ad2s120x", + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s120x_platform_data, + .controller_data = &ad2s120x_spi_chip_info, + }, +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", -- cgit v1.2.3-70-g09d2 From d40bd71f88e7be193ce4feb4b92572c70024b9c2 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Mon, 22 Feb 2010 10:31:06 +0000 Subject: Blackfin: rename AD1836 to AD183X in board files The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/boards/cm_bf527.c | 8 ++++---- arch/blackfin/mach-bf527/boards/ezkit.c | 8 ++++---- arch/blackfin/mach-bf533/boards/H8606.c | 4 ++-- arch/blackfin/mach-bf533/boards/cm_bf533.c | 4 ++-- arch/blackfin/mach-bf533/boards/ezkit.c | 4 ++-- arch/blackfin/mach-bf533/boards/stamp.c | 4 ++-- arch/blackfin/mach-bf537/boards/cm_bf537e.c | 4 ++-- arch/blackfin/mach-bf537/boards/cm_bf537u.c | 4 ++-- arch/blackfin/mach-bf537/boards/pnav10.c | 8 ++++---- arch/blackfin/mach-bf537/boards/stamp.c | 11 ++++++----- arch/blackfin/mach-bf537/boards/tcm_bf537.c | 4 ++-- arch/blackfin/mach-bf548/boards/ezkit.c | 8 ++++---- arch/blackfin/mach-bf561/boards/cm_bf561.c | 4 ++-- arch/blackfin/mach-bf561/boards/ezkit.c | 8 ++++---- 14 files changed, 42 insertions(+), 41 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index d6efdfa7d4e..ebe76d1e874 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -339,8 +339,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -417,8 +417,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 3d32a35427a..923383386aa 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -428,8 +428,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -544,8 +544,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index d10c8e8b69c..175371af069 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -171,7 +171,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -206,7 +206,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 16, diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index 0592fe0bb8a..fdcde61906d 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -71,7 +71,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -110,7 +110,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 84efda19384..739773cb7fc 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -222,7 +222,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -261,7 +261,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index e997d7f9a67..c457eaa6023 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -184,7 +184,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -251,7 +251,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index c54331282ba..d35fc5fe4c2 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -73,7 +73,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -112,7 +112,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index 18daacb00b2..d464ad5b72b 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index a0f64ff0fb5..812e8f99160 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -175,8 +175,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -238,8 +238,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 283cc66f022..e0f5663a8ac 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -528,8 +528,8 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -953,13 +953,14 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BF5XX_SOC_AD1836) \ - || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \ + || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE) { - .modalias = "ad1836", + .modalias = "ad183x", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */ + .platform_data = "ad1836", /* only includes chip name for the moment */ .controller_data = &ad1836_spi_chip_info, .mode = SPI_MODE_3, }, diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 59951cdef58..4f0a2e72ce4 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -74,7 +74,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -113,7 +113,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 5b392995707..06919db00a7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -963,8 +963,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -1020,8 +1020,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 37dd37523ad..e127aedc1d7 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -72,7 +72,7 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -111,7 +111,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index c7a5db79f83..9b93e2f9579 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -274,8 +274,8 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { .enable_dma = 0, .bits_per_word = 16, @@ -328,8 +328,8 @@ static struct platform_device bfin_spi0_device = { #endif static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_SND_BLACKFIN_AD1836) \ - || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD183X) \ + || defined(CONFIG_SND_BLACKFIN_AD183X_MODULE) { .modalias = "ad1836", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ -- cgit v1.2.3-70-g09d2 From 5f0225948ecc4bb21cc35839d3d447e22d40a71f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 24 Feb 2010 07:32:50 +0000 Subject: Blackfin: bf537-stamp: add example AD7414 temp sensor resources Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e0f5663a8ac..83489d899a1 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1763,6 +1763,19 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif +#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE) + { + I2C_BOARD_INFO("ad7414", 0x9), + .irq = IRQ_PG5, + /* + * platform_data pointer is borrwoed by the driver to + * store custimer defined IRQ ALART level mode. + * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. + */ + .platform_data = (void *)IRQF_TRIGGER_LOW, + }, +#endif + #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), @@ -2056,6 +2069,8 @@ static struct regulator_init_data adp_switch_regulator_data[] = { .constraints = { .name = REGULATOR_ADP122, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uA = 0, + .max_uA = 300000, }, .num_consumer_supplies = 1, /* only 1 */ .consumer_supplies = &adp122_consumers, @@ -2065,6 +2080,8 @@ static struct regulator_init_data adp_switch_regulator_data[] = { .constraints = { .name = REGULATOR_ADP150, .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .min_uA = 0, + .max_uA = 150000, }, .num_consumer_supplies = 1, /* only 1 */ .consumer_supplies = &adp150_consumers, -- cgit v1.2.3-70-g09d2 From 72fa2e9204d5efe4732346f99465a01c380f5cd3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Wed, 24 Feb 2010 21:05:35 +0000 Subject: Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 48 +++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 83489d899a1..8f929539b81 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1682,6 +1682,48 @@ static struct adp8870_backlight_platform_data adp8870_pdata = { }; #endif +#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) +#include +static struct led_info adp8860_leds[] = { + { + .name = "adp8860-led7", + .default_trigger = "none", + .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms, + }, +}; + +static struct adp8860_backlight_platform_data adp8860_pdata = { + .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 | + ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */ + + .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */ + .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */ + .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */ + + .en_ambl_sens = 1, /* 1 = enable ambient light sensor */ + .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */ + + .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */ + .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */ + + .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */ + .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */ + + .leds = adp8860_leds, + .num_leds = ARRAY_SIZE(adp8860_leds), + .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */ + .led_fade_in = ADP8860_FADE_T_600ms, + .led_fade_out = ADP8860_FADE_T_600ms, + .led_on_time = ADP8860_LED_ONT_200ms, +}; +#endif + #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) static struct regulator_consumer_supply ad5398_consumer = { .supply = "current", @@ -1868,6 +1910,12 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { .platform_data = (void *)&ad5398_i2c_platform_data, }, #endif +#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE) + { + I2C_BOARD_INFO("adp8860", 0x2A), + .platform_data = (void *)&adp8860_pdata, + }, +#endif }; #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) -- cgit v1.2.3-70-g09d2 From ef8873e06efdc023ee2e7f708787c79b78df3fcd Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 25 Feb 2010 10:27:48 +0000 Subject: Blackfin: bf537-stamp: add example AD7416 IIO resources Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 8f929539b81..4aec6c06f0f 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -1818,6 +1818,19 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif +#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE) + { + I2C_BOARD_INFO("ad7417", 0xb), + .irq = IRQ_PG5, + /* + * platform_data pointer is borrwoed by the driver to + * store custimer defined IRQ ALART level mode. + * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid. + */ + .platform_data = (void *)IRQF_TRIGGER_LOW, + }, +#endif + #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) { I2C_BOARD_INFO("pcf8574_lcd", 0x22), -- cgit v1.2.3-70-g09d2 From 848c51ccee5c4d51b1dc1a029508cfbb73f8c260 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Fri, 26 Feb 2010 11:49:52 +0000 Subject: Blackfin: bf537-stamp: add example AD2S1210 IIO resources Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 4aec6c06f0f..772b7bab0a9 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -675,6 +675,23 @@ static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = { }; #endif +#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) +unsigned short ad2s1210_platform_data[] = { + /* use as SAMPLE, A0, A1 */ + GPIO_PF7, GPIO_PF8, GPIO_PF9, +# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT) + /* the RES0 and RES1 pins */ + GPIO_PF4, GPIO_PF5, +# endif + 0, +}; + +static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #define MMC_SPI_CARD_DETECT_INT IRQ_PF5 @@ -1010,6 +1027,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE) + { + .modalias = "ad2s1210", + .max_speed_hz = 8192000, + .bus_num = 0, + .chip_select = 4, /* CS, change it for your board */ + .platform_data = ad2s1210_platform_data, + .controller_data = &ad2s1210_spi_chip_info, + }, +#endif + #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) { .modalias = "mmc_spi", -- cgit v1.2.3-70-g09d2 From 6ba255f4a8a0785ea8a2b052837a7b91eeac1bb4 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 8 Dec 2009 11:34:07 +0000 Subject: Blackfin: bf537-stamp: add example ADXL346 orientation resources Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf537/boards/stamp.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) (limited to 'arch/blackfin/mach-bf537/boards/stamp.c') diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 772b7bab0a9..9eaf5b05c11 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -734,11 +734,11 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = { .y_plate_ohms = 486, .pressure_max = 1000, .pressure_min = 0, - .stopacq_polarity = 1, - .first_conversion_delay = 3, - .acquisition_time = 1, - .averaging = 1, - .pen_down_acc_interval = 1, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, }; #endif @@ -749,11 +749,11 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */ .pressure_max = 10000, .pressure_min = 0, - .first_conversion_delay = 3, /* wait 512us before do a first conversion */ - .acquisition_time = 1, /* 4us acquisition time per sample */ + .first_conversion_delay = 3, /* wait 512us before do a first conversion */ + .acquisition_time = 1, /* 4us acquisition time per sample */ .median = 2, /* do 8 measurements */ - .averaging = 1, /* take the average of 4 middle samples */ - .pen_down_acc_interval = 255, /* 9.4 ms */ + .averaging = 1, /* take the average of 4 middle samples */ + .pen_down_acc_interval = 255, /* 9.4 ms */ .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; @@ -790,6 +790,11 @@ static const struct adxl34x_platform_data adxl34x_info = { /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, }; #endif -- cgit v1.2.3-70-g09d2