From 22a826288522863fb748851824ce634eda4f1b07 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 16 May 2012 17:24:33 +0800 Subject: blackfin: mach-bf609: add machine files Add machine files for bf60x including head files, Kconfig/Makefile and board file. Signed-off-by: Sonic Zhang Signed-off-by: Bob Liu --- arch/blackfin/mach-bf609/boards/Kconfig | 12 + arch/blackfin/mach-bf609/boards/Makefile | 5 + arch/blackfin/mach-bf609/boards/ezkit.c | 1328 ++++++++++++++++++++++++++++++ 3 files changed, 1345 insertions(+) create mode 100644 arch/blackfin/mach-bf609/boards/Kconfig create mode 100644 arch/blackfin/mach-bf609/boards/Makefile create mode 100644 arch/blackfin/mach-bf609/boards/ezkit.c (limited to 'arch/blackfin/mach-bf609/boards') diff --git a/arch/blackfin/mach-bf609/boards/Kconfig b/arch/blackfin/mach-bf609/boards/Kconfig new file mode 100644 index 00000000000..30e8b6b0d2e --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/Kconfig @@ -0,0 +1,12 @@ +choice + prompt "System type" + default BFIN609_EZKIT + help + Select your board! + +config BFIN609_EZKIT + bool "BF609-EZKIT" + help + BFIN609-EZKIT board support. + +endchoice diff --git a/arch/blackfin/mach-bf609/boards/Makefile b/arch/blackfin/mach-bf609/boards/Makefile new file mode 100644 index 00000000000..11f98b0882e --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/Makefile @@ -0,0 +1,5 @@ +# +# arch/blackfin/mach-bf609/boards/Makefile +# + +obj-$(CONFIG_BFIN609_EZKIT) += ezkit.o diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c new file mode 100644 index 00000000000..0c96754b4d3 --- /dev/null +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -0,0 +1,1328 @@ +/* + * Copyright 2004-2009 Analog Devices Inc. + * 2005 National ICT Australia (NICTA) + * Aidan Williams + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "ADI BF609-EZKIT"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +#include +static struct resource bfin_isp1760_resources[] = { + [0] = { + .start = 0x2C0C0000, + .end = 0x2C0C0000 + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PG7, + .end = IRQ_PG7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct isp1760_platform_data isp1760_priv = { + .is_isp1761 = 0, + .bus_width_16 = 1, + .port1_otg = 0, + .analog_oc = 0, + .dack_polarity_high = 0, + .dreq_polarity_high = 0, +}; + +static struct platform_device bfin_isp1760_device = { + .name = "isp1760", + .id = 0, + .dev = { + .platform_data = &isp1760_priv, + }, + .num_resources = ARRAY_SIZE(bfin_isp1760_resources), + .resource = bfin_isp1760_resources, +}; +#endif + +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) +#include + +static struct bfin_rotary_platform_data bfin_rotary_data = { + /*.rotary_up_key = KEY_UP,*/ + /*.rotary_down_key = KEY_DOWN,*/ + .rotary_rel_code = REL_WHEEL, + .rotary_button_key = KEY_ENTER, + .debounce = 10, /* 0..17 */ + .mode = ROT_QUAD_ENC | ROT_DEBE, +}; + +static struct resource bfin_rotary_resources[] = { + { + .start = IRQ_CNT, + .end = IRQ_CNT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_rotary_device = { + .name = "bfin-rotary", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_rotary_resources), + .resource = bfin_rotary_resources, + .dev = { + .platform_data = &bfin_rotary_data, + }, +}; +#endif + +#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) +#include + +static struct stmmac_mdio_bus_data phy_private_data = { + .bus_id = 0, + .phy_mask = 1, +}; + +static struct plat_stmmacenet_data eth_private_data = { + .bus_id = 0, + .enh_desc = 1, + .phy_addr = 1, + .mdio_bus_data = &phy_private_data, +}; + +static struct platform_device bfin_eth_device = { + .name = "stmmaceth", + .id = 0, + .num_resources = 2, + .resource = (struct resource[]) { + { + .start = EMAC0_MACCFG, + .end = EMAC0_MACCFG + 0x1274, + .flags = IORESOURCE_MEM, + }, + { + .name = "macirq", + .start = IRQ_EMAC0_STAT, + .end = IRQ_EMAC0_STAT, + .flags = IORESOURCE_IRQ, + }, + }, + .dev = { + .platform_data = ð_private_data, + } +}; +#endif + +#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) +#include +static const struct adxl34x_platform_data adxl34x_info = { + .x_axis_offset = 0, + .y_axis_offset = 0, + .z_axis_offset = 0, + .tap_threshold = 0x31, + .tap_duration = 0x10, + .tap_latency = 0x60, + .tap_window = 0xF0, + .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, + .act_axis_control = 0xFF, + .activity_threshold = 5, + .inactivity_threshold = 3, + .inactivity_time = 4, + .free_fall_threshold = 0x7, + .free_fall_time = 0x20, + .data_rate = 0x8, + .data_range = ADXL_FULL_RES, + + .ev_type = EV_ABS, + .ev_code_x = ABS_X, /* EV_REL */ + .ev_code_y = ABS_Y, /* EV_REL */ + .ev_code_z = ABS_Z, /* EV_REL */ + + .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */ + +/* .ev_code_ff = KEY_F,*/ /* EV_KEY */ +/* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ + .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, + .fifo_mode = ADXL_FIFO_STREAM, + .orientation_enable = ADXL_EN_ORIENTATION_3D, + .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8, + .divisor_length = ADXL_LP_FILTER_DIVISOR_16, + /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */ + .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C}, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 +static struct resource bfin_uart0_resources[] = { + { + .start = UART0_REVID, + .end = UART0_RXDIV+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_RX, + .end = IRQ_UART0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART0_STAT, + .end = IRQ_UART0_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART0_RX, + .end = CH_UART0_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART0_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PD10, + .end = GPIO_PD10, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PD9, + .end = GPIO_PD9, + .flags = IORESOURCE_IO, + }, +#endif +}; + +static unsigned short bfin_uart0_peripherals[] = { + P_UART0_TX, P_UART0_RX, +#ifdef CONFIG_BFIN_UART0_CTSRTS + P_UART0_RTS, P_UART0_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart0_device = { + .name = "bfin-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_uart0_resources), + .resource = bfin_uart0_resources, + .dev = { + .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 +static struct resource bfin_uart1_resources[] = { + { + .start = UART1_REVID, + .end = UART1_RXDIV+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_RX, + .end = IRQ_UART1_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_UART1_STAT, + .end = IRQ_UART1_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_UART1_RX, + .end = CH_UART1_RX, + .flags = IORESOURCE_DMA, + }, +#ifdef CONFIG_BFIN_UART1_CTSRTS + { /* CTS pin -- 0 means not supported */ + .start = GPIO_PG13, + .end = GPIO_PG13, + .flags = IORESOURCE_IO, + }, + { /* RTS pin -- 0 means not supported */ + .start = GPIO_PG10, + .end = GPIO_PG10, + .flags = IORESOURCE_IO, + }, +#endif +}; + +static unsigned short bfin_uart1_peripherals[] = { + P_UART1_TX, P_UART1_RX, +#ifdef CONFIG_BFIN_UART1_CTSRTS + P_UART1_RTS, P_UART1_CTS, +#endif + 0 +}; + +static struct platform_device bfin_uart1_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart1_resources), + .resource = bfin_uart1_resources, + .dev = { + .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 +static struct resource bfin_sir0_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART0_TX, + .end = IRQ_UART0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART0_TX, + .end = CH_UART0_TX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir0_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir0_resources), + .resource = bfin_sir0_resources, +}; +#endif +#ifdef CONFIG_BFIN_SIR1 +static struct resource bfin_sir1_resources[] = { + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_UART1_TX, + .end = IRQ_UART1_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_UART1_TX, + .end = CH_UART1_TX+1, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sir1_device = { + .name = "bfin_sir", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sir1_resources), + .resource = bfin_sir1_resources, +}; +#endif +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xFFCC1000, + .end = 0xFFCC1398, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_STAT, + .end = IRQ_USB_STAT, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "mc" + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + .name = "dma" + }, +}; + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 0, + .dma = 1, + .num_eps = 16, + .dma_channels = 8, + .clkin = 48, /* musb CLKIN in MHZ */ +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .config = &musb_config, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb-blackfin", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART +static struct resource bfin_sport0_uart_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 +}; + +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources), + .resource = bfin_sport0_uart_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART +static struct resource bfin_sport1_uart_resources[] = { + { + .start = SPORT1_TCR1, + .end = SPORT1_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT1_RX, + .end = IRQ_SPORT1_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT1_ERROR, + .end = IRQ_SPORT1_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport1_peripherals[] = { + P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0 +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources), + .resource = bfin_sport1_uart_resources, + .dev = { + .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ + }, +}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +static struct resource bfin_sport2_uart_resources[] = { + { + .start = SPORT2_TCR1, + .end = SPORT2_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT2_RX, + .end = IRQ_SPORT2_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT2_ERROR, + .end = IRQ_SPORT2_ERROR, + .flags = IORESOURCE_IRQ, + }, +}; + +static unsigned short bfin_sport2_peripherals[] = { + P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0 +}; + +static struct platform_device bfin_sport2_uart_device = { + .name = "bfin-sport-uart", + .id = 2, + .num_resources = ARRAY_SIZE(bfin_sport2_uart_resources), + .resource = bfin_sport2_uart_resources, + .dev = { + .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ + }, +}; +#endif +#endif + +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + +static unsigned short bfin_can0_peripherals[] = { + P_CAN0_RX, P_CAN0_TX, 0 +}; + +static struct resource bfin_can0_resources[] = { + { + .start = 0xFFC00A00, + .end = 0xFFC00FFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CAN0_RX, + .end = IRQ_CAN0_RX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_TX, + .end = IRQ_CAN0_TX, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CAN0_STAT, + .end = IRQ_CAN0_STAT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_can0_device = { + .name = "bfin_can", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_can0_resources), + .resource = bfin_can0_resources, + .dev = { + .platform_data = &bfin_can0_peripherals, /* Passed to driver */ + }, +}; + +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "bootloader(nand)", + .offset = 0, + .size = 0x80000, + }, { + .name = "linux kernel(nand)", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "file system(nand)", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct bf5xx_nand_platform bfin_nand_platform = { + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bfin_nand_resources[] = { + { + .start = 0xFFC03B00, + .end = 0xFFC03B4F, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_nand_device = { + .name = "bfin-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_nand_resources), + .resource = bfin_nand_resources, + .dev = { + .platform_data = &bfin_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + +static struct bfin_sd_host bfin_sdh_data = { + .dma_chan = CH_RSI, + .irq_int0 = IRQ_RSI_INT0, + .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0}, +}; + +static struct platform_device bfin_sdh_device = { + .name = "bfin-sdh", + .id = 0, + .dev = { + .platform_data = &bfin_sdh_data, + }, +}; +#endif + +#if defined(CONFIG_MTD_BFIN_BF60x) || defined(CONFIG_MTD_BFIN_BF60x_MODULE) +static struct mtd_partition ezkit_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x80000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0x400000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = 0x1000000 - 0x80000 - 0x400000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +int bf609_nor_flash_init(struct platform_device *dev) +{ +#define CONFIG_SMC_GCTL_VAL 0x00000010 + const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + + peripheral_request_list(pins, "smc0"); + + bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL); + bfin_write32(SMC_B0CTL, 0x01002001); + bfin_write32(SMC_B0TIM, 0x08170977); + bfin_write32(SMC_B0ETIM, 0x00092231); + return 0; +} + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .init = bf609_nor_flash_init, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0xb0000000, + .end = 0xb0ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "bf60x-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +/* SPI flash chip (w25q32) */ +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00080000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x00180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "w25q32", +}; + +static struct bfin6xx_spi_chip spi_flash_chip_info = { + .enable_dma = true, /* use dma transfer with this chip*/ +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin6xx_spi_chip spidev_chip_info = { + .enable_dma = true, +}; +#endif + +#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) +static struct platform_device bfin_i2s_pcm = { + .name = "bfin-i2s-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ + defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) +#include +static struct resource bfin_snd_resources[] = { + { + .start = SPORT0_CTL_A, + .end = SPORT0_CTL_A, + .flags = IORESOURCE_MEM, + }, + { + .start = SPORT0_CTL_B, + .end = SPORT0_CTL_B, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, + { + .start = IRQ_SPORT0_TX_STAT, + .end = IRQ_SPORT0_TX_STAT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_RX_STAT, + .end = IRQ_SPORT0_RX_STAT, + .flags = IORESOURCE_IRQ, + }, +}; + +static const unsigned short bfin_snd_pin[] = { + P_SPORT0_ACLK, P_SPORT0_AFS, P_SPORT0_AD0, P_SPORT0_BCLK, + P_SPORT0_BFS, P_SPORT0_BD0, 0, +}; + +static struct bfin_snd_platform_data bfin_snd_data = { + .pin_req = bfin_snd_pin, +}; + +static struct platform_device bfin_i2s = { + .name = "bfin-i2s", + .num_resources = ARRAY_SIZE(bfin_snd_resources), + .resource = bfin_snd_resources, + .dev = { + .platform_data = &bfin_snd_data, + }, +}; +#endif + +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) +static struct platform_device adau1761_device = { + .name = "bfin-eval-adau1x61", +}; +#endif + +#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) +#include +static struct adau1761_platform_data adau1761_info = { + .lineout_mode = ADAU1761_OUTPUT_MODE_LINE, + .headphone_mode = ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS, +}; +#endif + +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) +#include +#include +#include + +static const unsigned short ppi_req[] = { + P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, + P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, + P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, + 0, +}; + +static const struct ppi_info ppi_info = { + .type = PPI_TYPE_EPPI3, + .dma_ch = CH_EPPI0_CH0, + .irq_err = IRQ_EPPI0_STAT, + .base = (void __iomem *)EPPI0_STAT, + .pin_req = ppi_req, +}; + +#if defined(CONFIG_VIDEO_VS6624) \ + || defined(CONFIG_VIDEO_VS6624_MODULE) +static struct v4l2_input vs6624_inputs[] = { + { + .index = 0, + .name = "Camera", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = V4L2_STD_UNKNOWN, + }, +}; + +static struct bcap_route vs6624_routes[] = { + { + .input = 0, + .output = 0, + }, +}; + +static const unsigned vs6624_ce_pin = GPIO_PD1; + +static struct bfin_capture_config bfin_capture_data = { + .card_name = "BF609", + .inputs = vs6624_inputs, + .num_inputs = ARRAY_SIZE(vs6624_inputs), + .routes = vs6624_routes, + .i2c_adapter_id = 0, + .board_info = { + .type = "vs6624", + .addr = 0x10, + .platform_data = (void *)&vs6624_ce_pin, + }, + .ppi_info = &ppi_info, + .ppi_control = (PACK_EN | DLEN_8 | EPPI_CTL_FS1HI_FS2HI + | EPPI_CTL_POLC3 | EPPI_CTL_SYNC2 | EPPI_CTL_NON656), + .blank_clocks = 8, +}; +#endif + +static struct platform_device bfin_capture_device = { + .name = "bfin_capture", + .dev = { + .platform_data = &bfin_capture_data, + }, +}; +#endif + +#if defined(CONFIG_BFIN_CRC) +#define BFIN_CRC_NAME "bfin-crc" + +static struct resource bfin_crc0_resources[] = { + { + .start = REG_CRC0_CTL, + .end = REG_CRC0_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC0_DCNTEXP, + .end = IRQ_CRC0_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM0_SRC_CRC0, + .end = CH_MEM_STREAM0_SRC_CRC0, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_MEM_STREAM0_DEST_CRC0, + .end = CH_MEM_STREAM0_DEST_CRC0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crc0_device = { + .name = BFIN_CRC_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(bfin_crc0_resources), + .resource = bfin_crc0_resources, +}; + +static struct resource bfin_crc1_resources[] = { + { + .start = REG_CRC1_CTL, + .end = REG_CRC1_REVID+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CRC1_DCNTEXP, + .end = IRQ_CRC1_DCNTEXP, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_MEM_STREAM1_SRC_CRC1, + .end = CH_MEM_STREAM1_SRC_CRC1, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_MEM_STREAM1_DEST_CRC1, + .end = CH_MEM_STREAM1_DEST_CRC1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device bfin_crc1_device = { + .name = BFIN_CRC_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(bfin_crc1_resources), + .resource = bfin_crc1_resources, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* SPI_SSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) + { + .modalias = "adxl34x", + .platform_data = &adxl34x_info, + .irq = IRQ_PC5, + .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 2, + .mode = SPI_MODE_3, + }, +#endif +}; +#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPI0_TX, + .end = CH_SPI0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPI0_RX, + .end = CH_SPI0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +/* SPI (1) */ +static struct resource bfin_spi1_resource[] = { + { + .start = SPI1_REGBASE, + .end = SPI1_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_SPI1_TX, + .end = CH_SPI1_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPI1_RX, + .end = CH_SPI1_RX, + .flags = IORESOURCE_DMA, + }, + +}; + +/* SPI controller data */ +static struct bfin6xx_spi_master bf60x_spi_master_info0 = { + .num_chipselect = 4, + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bf60x_spi_master0 = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bf60x_spi_master_info0, /* Passed to driver */ + }, +}; + +static struct bfin6xx_spi_master bf60x_spi_master_info1 = { + .num_chipselect = 4, + .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, +}; + +static struct platform_device bf60x_spi_master1 = { + .name = "bfin-spi", + .id = 1, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi1_resource), + .resource = bfin_spi1_resource, + .dev = { + .platform_data = &bf60x_spi_master_info1, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_CLKDIV, + .end = TWI0_CLKDIV + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI0, + .end = IRQ_TWI0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi0_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; + +static struct resource bfin_twi1_resource[] = { + [0] = { + .start = TWI1_CLKDIV, + .end = TWI1_CLKDIV + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI1, + .end = IRQ_TWI1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi1_device = { + .name = "i2c-bfin-twi", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_twi1_resource), + .resource = bfin_twi1_resource, +}; +#endif + +static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { +#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) + { + I2C_BOARD_INFO("adxl34x", 0x53), + .irq = IRQ_PC5, + .platform_data = (void *)&adxl34x_info, + }, +#endif +#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE) + { + I2C_BOARD_INFO("adau1761", 0x38), + .platform_data = (void *)&adau1761_info + }, +#endif +}; + +static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { +}; + +static const unsigned int cclk_vlev_datasheet[] = +{ +/* + * Internal VLEV BF54XSBBC1533 + ****temporarily using these values until data sheet is updated + */ + VRPAIR(VLEV_085, 150000000), + VRPAIR(VLEV_090, 250000000), + VRPAIR(VLEV_110, 276000000), + VRPAIR(VLEV_115, 301000000), + VRPAIR(VLEV_120, 525000000), + VRPAIR(VLEV_125, 550000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *ezkit_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +#ifdef CONFIG_BFIN_SIR0 + &bfin_sir0_device, +#endif +#ifdef CONFIG_BFIN_SIR1 + &bfin_sir1_device, +#endif +#endif + +#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) + &bfin_eth_device, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) + &bfin_isp1760_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#endif + +#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) + &bfin_can0_device, +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bfin_nand_device, +#endif + +#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) + &bfin_sdh_device, +#endif + +#if defined(CONFIG_SPI_BFIN6XX) || defined(CONFIG_SPI_BFIN6XX_MODULE) + &bf60x_spi_master0, + &bf60x_spi_master1, +#endif + +#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) + &bfin_rotary_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi0_device, +#if !defined(CONFIG_BF542) + &i2c_bfin_twi1_device, +#endif +#endif + +#if defined(CONFIG_BFIN_CRC) + &bfin_crc0_device, + &bfin_crc1_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_MTD_BFIN_BF60x) || defined(CONFIG_MTD_BFIN_BF60x_MODULE) + &ezkit_flash_device, +#endif +#if defined(CONFIG_SND_BF6XX_I2S) || defined(CONFIG_SND_BF6XX_I2S_MODULE) + &bfin_i2s_pcm, +#endif +#if defined(CONFIG_SND_BF6XX_SOC_I2S) || \ + defined(CONFIG_SND_BF6XX_SOC_I2S_MODULE) + &bfin_i2s, +#endif +#if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) || \ + defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61_MODULE) + &adau1761_device, +#endif +#if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \ + || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) + &bfin_capture_device, +#endif +}; + +static int __init ezkit_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + i2c_register_board_info(0, bfin_i2c_board_info0, + ARRAY_SIZE(bfin_i2c_board_info0)); + i2c_register_board_info(1, bfin_i2c_board_info1, + ARRAY_SIZE(bfin_i2c_board_info1)); + +#if defined(CONFIG_STMMAC_ETH) || defined(CONFIG_STMMAC_ETH_MODULE) + unsigned short pins[] = P_RMII0; + if (!peripheral_request_list(pins, "emac0")) + printk(KERN_ERR "%s(): request emac pins failed\n", __func__); +#endif + + platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + + return 0; +} + +arch_initcall(ezkit_init); + +static struct platform_device *ezkit_early_devices[] __initdata = { +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +#ifdef CONFIG_SERIAL_BFIN_UART0 + &bfin_uart0_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + &bfin_uart1_device, +#endif +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE) +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART + &bfin_sport0_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART + &bfin_sport1_uart_device, +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART + &bfin_sport2_uart_device, +#endif +#endif +}; + +void __init native_machine_early_platform_add_devices(void) +{ + printk(KERN_INFO "register early platform devices\n"); + early_platform_add_devices(ezkit_early_devices, + ARRAY_SIZE(ezkit_early_devices)); +} -- cgit v1.2.3-70-g09d2