From a92b05880d261e9017ef8e7d5b6b01e0e5aa991d Mon Sep 17 00:00:00 2001 From: Daniel Laird Date: Thu, 6 Mar 2008 09:07:18 +0000 Subject: [MIPS] Move arch/mips/philips to arch/mips/nxp Signed-off-by: daniel.j.laird Signed-off-by: Ralf Baechle --- arch/mips/nxp/pnx8550/common/Makefile | 29 ++++ arch/mips/nxp/pnx8550/common/gdb_hook.c | 109 +++++++++++++ arch/mips/nxp/pnx8550/common/int.c | 238 +++++++++++++++++++++++++++++ arch/mips/nxp/pnx8550/common/pci.c | 133 ++++++++++++++++ arch/mips/nxp/pnx8550/common/platform.c | 132 ++++++++++++++++ arch/mips/nxp/pnx8550/common/proc.c | 112 ++++++++++++++ arch/mips/nxp/pnx8550/common/prom.c | 129 ++++++++++++++++ arch/mips/nxp/pnx8550/common/reset.c | 49 ++++++ arch/mips/nxp/pnx8550/common/setup.c | 157 +++++++++++++++++++ arch/mips/nxp/pnx8550/common/time.c | 150 ++++++++++++++++++ arch/mips/nxp/pnx8550/jbs/Makefile | 4 + arch/mips/nxp/pnx8550/jbs/board_setup.c | 65 ++++++++ arch/mips/nxp/pnx8550/jbs/init.c | 53 +++++++ arch/mips/nxp/pnx8550/jbs/irqmap.c | 35 +++++ arch/mips/nxp/pnx8550/stb810/Makefile | 4 + arch/mips/nxp/pnx8550/stb810/board_setup.c | 49 ++++++ arch/mips/nxp/pnx8550/stb810/irqmap.c | 22 +++ arch/mips/nxp/pnx8550/stb810/prom_init.c | 46 ++++++ 18 files changed, 1516 insertions(+) create mode 100644 arch/mips/nxp/pnx8550/common/Makefile create mode 100644 arch/mips/nxp/pnx8550/common/gdb_hook.c create mode 100644 arch/mips/nxp/pnx8550/common/int.c create mode 100644 arch/mips/nxp/pnx8550/common/pci.c create mode 100644 arch/mips/nxp/pnx8550/common/platform.c create mode 100644 arch/mips/nxp/pnx8550/common/proc.c create mode 100644 arch/mips/nxp/pnx8550/common/prom.c create mode 100644 arch/mips/nxp/pnx8550/common/reset.c create mode 100644 arch/mips/nxp/pnx8550/common/setup.c create mode 100644 arch/mips/nxp/pnx8550/common/time.c create mode 100644 arch/mips/nxp/pnx8550/jbs/Makefile create mode 100644 arch/mips/nxp/pnx8550/jbs/board_setup.c create mode 100644 arch/mips/nxp/pnx8550/jbs/init.c create mode 100644 arch/mips/nxp/pnx8550/jbs/irqmap.c create mode 100644 arch/mips/nxp/pnx8550/stb810/Makefile create mode 100644 arch/mips/nxp/pnx8550/stb810/board_setup.c create mode 100644 arch/mips/nxp/pnx8550/stb810/irqmap.c create mode 100644 arch/mips/nxp/pnx8550/stb810/prom_init.c (limited to 'arch/mips/nxp') diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile new file mode 100644 index 00000000000..31cc1a5cec3 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -0,0 +1,29 @@ +# +# Per Hallsmark, per.hallsmark@mvista.com +# +# ######################################################################## +# +# This program is free software; you can distribute it and/or modify it +# under the terms of the GNU General Public License (Version 2) as +# published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +# +# ####################################################################### +# +# Makefile for the PNX8550 specific kernel interface routines +# under Linux. +# + +obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_KGDB) += gdb_hook.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c new file mode 100644 index 00000000000..ad4624f6d9b --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/gdb_hook.c @@ -0,0 +1,109 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * This is the interface to the remote debugger stub. + * + */ +#include +#include +#include +#include +#include + +#include +#include + +#include + +static struct serial_state rs_table[IP3106_NR_PORTS] = { +}; +static struct async_struct kdb_port_info = {0}; + +void rs_kgdb_hook(int tty_no) +{ + struct serial_state *ser = &rs_table[tty_no]; + + kdb_port_info.state = ser; + kdb_port_info.magic = SERIAL_MAGIC; + kdb_port_info.port = tty_no; + kdb_port_info.flags = ser->flags; + + /* + * Clear all interrupts + */ + /* Clear all the transmitter FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; + /* Clear all the receiver FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; + /* Clear all interrupts */ + ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | + IP3106_UART_INT_ALLTX; + + /* + * Now, initialize the UART + */ + ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; + ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud +} + +int putDebugChar(char c) +{ + /* Wait until FIFO not full */ + while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) + ; + /* Send one char */ + ip3106_fifo(UART_BASE, kdb_port_info.port) = c; + + return 1; +} + +char getDebugChar(void) +{ + char ch; + + /* Wait until there is a char in the FIFO */ + while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & + IP3106_UART_FIFO_RXFIFO) >> 8)) + ; + /* Read one char */ + ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & + IP3106_UART_FIFO_RBRTHR; + /* Advance the RX FIFO read pointer */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; + return (ch); +} + +void rs_disable_debug_interrupts(void) +{ + ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ +} + +void rs_enable_debug_interrupts(void) +{ + /* Clear all the transmitter FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; + /* Clear all the receiver FIFO counters (pointer and status) */ + ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; + /* Clear all interrupts */ + ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | + IP3106_UART_INT_ALLTX; + ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ +} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c new file mode 100644 index 00000000000..aad03429a5e --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -0,0 +1,238 @@ +/* + * + * Copyright (C) 2005 Embedded Alley Solutions, Inc + * Ported to 2.6. + * + * Per Hallsmark, per.hallsmark@mvista.com + * Copyright (C) 2000, 2001 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * + * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* default prio for interrupts */ +/* first one is a no-no so therefore always prio 0 (disabled) */ +static char gic_prio[PNX8550_INT_GIC_TOTINT] = { + 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49 + 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59 + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69 + 1 // 70 +}; + +static void hw0_irqdispatch(int irq) +{ + /* find out which interrupt */ + irq = PNX8550_GIC_VECTOR_0 >> 3; + + if (irq == 0) { + printk("hw0_irqdispatch: irq 0, spurious interrupt?\n"); + return; + } + do_IRQ(PNX8550_INT_GIC_MIN + irq); +} + + +static void timer_irqdispatch(int irq) +{ + irq = (0x01c0 & read_c0_config7()) >> 6; + + if (unlikely(irq == 0)) { + printk("timer_irqdispatch: irq 0, spurious interrupt?\n"); + return; + } + + if (irq & 0x1) + do_IRQ(PNX8550_INT_TIMER1); + if (irq & 0x2) + do_IRQ(PNX8550_INT_TIMER2); + if (irq & 0x4) + do_IRQ(PNX8550_INT_TIMER3); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP2) + hw0_irqdispatch(2); + else if (pending & STATUSF_IP7) { + if (read_c0_config7() & 0x01c0) + timer_irqdispatch(7); + } else + spurious_interrupt(); +} + +static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) +{ + unsigned long status = read_c0_status(); + + status &= ~((clr_mask & 0xFF) << 8); + status |= (set_mask & 0xFF) << 8; + + write_c0_status(status); +} + +static inline void mask_gic_int(unsigned int irq_nr) +{ + /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */ + PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */ +} + +static inline void unmask_gic_int(unsigned int irq_nr) +{ + /* set prio mask to lower four bits and enable interrupt */ + PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr]; +} + +static inline void mask_irq(unsigned int irq_nr) +{ + if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { + modify_cp0_intmask(1 << irq_nr, 0); + } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_GIC_MAX)) { + mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); + } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_TIMER_MAX)) { + modify_cp0_intmask(1 << 7, 0); + } else { + printk("mask_irq: irq %d doesn't exist!\n", irq_nr); + } +} + +static inline void unmask_irq(unsigned int irq_nr) +{ + if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { + modify_cp0_intmask(0, 1 << irq_nr); + } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_GIC_MAX)) { + unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); + } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && + (irq_nr <= PNX8550_INT_TIMER_MAX)) { + modify_cp0_intmask(0, 1 << 7); + } else { + printk("mask_irq: irq %d doesn't exist!\n", irq_nr); + } +} + +int pnx8550_set_gic_priority(int irq, int priority) +{ + int gic_irq = irq-PNX8550_INT_GIC_MIN; + int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf; + + gic_prio[gic_irq] = priority; + PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]); + + return prev_priority; +} + +static struct irq_chip level_irq_type = { + .name = "PNX Level IRQ", + .ack = mask_irq, + .mask = mask_irq, + .mask_ack = mask_irq, + .unmask = unmask_irq, +}; + +static struct irqaction gic_action = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "GIC", +}; + +static struct irqaction timer_action = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "Timer", +}; + +void __init arch_init_irq(void) +{ + int i; + int configPR; + + for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + mask_irq(i); /* mask the irq just in case */ + } + + /* init of GIC/IPC interrupts */ + /* should be done before cp0 since cp0 init enables the GIC int */ + for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) { + int gic_int_line = i - PNX8550_INT_GIC_MIN; + if (gic_int_line == 0 ) + continue; // don't fiddle with int 0 + /* + * enable change of TARGET, ENABLE and ACTIVE_LOW bits + * set TARGET 0 to route through hw0 interrupt + * set ACTIVE_LOW 0 active high (correct?) + * + * We really should setup an interrupt description table + * to do this nicely. + * Note, PCI INTA is active low on the bus, but inverted + * in the GIC, so to us it's active high. + */ + PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000; + + /* mask/priority is still 0 so we will not get any + * interrupts until it is unmasked */ + + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + } + + /* Priority level 0 */ + PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0; + + /* Set int vector table address */ + PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0; + + set_irq_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type, + handle_level_irq); + setup_irq(MIPS_CPU_GIC_IRQ, &gic_action); + + /* init of Timer interrupts */ + for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) + set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); + + /* Stop Timer 1-3 */ + configPR = read_c0_config7(); + configPR |= 0x00000038; + write_c0_config7(configPR); + + set_irq_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type, + handle_level_irq); + setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action); +} + +EXPORT_SYMBOL(pnx8550_set_gic_priority); diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c new file mode 100644 index 00000000000..eee4f3dfc41 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/pci.c @@ -0,0 +1,133 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * + * Author: source@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include + +#include +#include +#include + +static struct resource pci_io_resource = { + .start = PNX8550_PCIIO + 0x1000, /* reserve regacy I/O space */ + .end = PNX8550_PCIIO + PNX8550_PCIIO_SIZE, + .name = "pci IO space", + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .start = PNX8550_PCIMEM, + .end = PNX8550_PCIMEM + PNX8550_PCIMEM_SIZE - 1, + .name = "pci memory space", + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops pnx8550_pci_ops; + +static struct pci_controller pnx8550_controller = { + .pci_ops = &pnx8550_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ +static inline unsigned long get_system_mem_size(void) +{ + /* Read IP2031_RANK0_ADDR_LO */ + unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); + /* Read IP2031_RANK1_ADDR_HI */ + unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); + + return dram_r1_hi - dram_r0_lo + 1; +} + +static int __init pnx8550_pci_setup(void) +{ + int pci_mem_code; + int mem_size = get_system_mem_size() >> 20; + + /* Clear the Global 2 Register, PCI Inta Output Enable Registers + Bit 1:Enable DAC Powerdown + -> 0:DACs are enabled and are working normally + 1:DACs are powerdown + Bit 0:Enable of PCI inta output + -> 0 = Disable PCI inta output + 1 = Enable PCI inta output + */ + PNX8550_GLB2_ENAB_INTA_O = 0; + + /* Calc the PCI mem size code */ + if (mem_size >= 128) + pci_mem_code = SIZE_128M; + else if (mem_size >= 64) + pci_mem_code = SIZE_64M; + else if (mem_size >= 32) + pci_mem_code = SIZE_32M; + else + pci_mem_code = SIZE_16M; + + /* Set PCI_XIO registers */ + outl(pci_mem_resource.start, PCI_BASE | PCI_BASE1_LO); + outl(pci_mem_resource.end + 1, PCI_BASE | PCI_BASE1_HI); + outl(pci_io_resource.start, PCI_BASE | PCI_BASE2_LO); + outl(pci_io_resource.end, PCI_BASE | PCI_BASE2_HI); + + /* Send memory transaction via PCI_BASE2 */ + outl(0x00000001, PCI_BASE | PCI_IO); + + /* Unlock the setup register */ + outl(0xca, PCI_BASE | PCI_UNLOCKREG); + + /* + * BAR0 of PNX8550 (pci base 10) must be zero in order for ide + * to work, and in order for bus_to_baddr to work without any + * hacks. + */ + outl(0x00000000, PCI_BASE | PCI_BASE10); + + /* + *These two bars are set by default or the boot code. + * However, it's safer to set them here so we're not boot + * code dependent. + */ + outl(0x1be00000, PCI_BASE | PCI_BASE14); /* PNX MMIO */ + outl(PNX8550_NAND_BASE_ADDR, PCI_BASE | PCI_BASE18); /* XIO */ + + outl(PCI_EN_TA | + PCI_EN_PCI2MMI | + PCI_EN_XIO | + PCI_SETUP_BASE18_SIZE(SIZE_32M) | + PCI_SETUP_BASE18_EN | + PCI_SETUP_BASE14_EN | + PCI_SETUP_BASE10_PREF | + PCI_SETUP_BASE10_SIZE(pci_mem_code) | + PCI_SETUP_CFGMANAGE_EN | + PCI_SETUP_PCIARB_EN, + PCI_BASE | + PCI_SETUP); /* PCI_SETUP */ + outl(0x00000000, PCI_BASE | PCI_CTRL); /* PCI_CONTROL */ + + register_pci_controller(&pnx8550_controller); + + return 0; +} + +arch_initcall(pnx8550_pci_setup); diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c new file mode 100644 index 00000000000..c7c763dbe58 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/platform.c @@ -0,0 +1,132 @@ +/* + * Platform device support for NXP PNX8550 SoCs + * + * Copyright 2005, Embedded Alley Solutions, Inc + * + * Based on arch/mips/au1000/common/platform.c + * Platform device support for Au1x00 SoCs. + * + * Copyright 2004, Matt Porter + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct resource pnx8550_usb_ohci_resources[] = { + [0] = { + .start = PNX8550_USB_OHCI_OP_BASE, + .end = PNX8550_USB_OHCI_OP_BASE + + PNX8550_USB_OHCI_OP_LEN, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8550_INT_USB, + .end = PNX8550_INT_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource pnx8550_uart_resources[] = { + [0] = { + .start = PNX8550_UART_PORT0, + .end = PNX8550_UART_PORT0 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PNX8550_UART_INT(0), + .end = PNX8550_UART_INT(0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = PNX8550_UART_PORT1, + .end = PNX8550_UART_PORT1 + 0xfff, + .flags = IORESOURCE_MEM, + }, + [3] = { + .start = PNX8550_UART_INT(1), + .end = PNX8550_UART_INT(1), + .flags = IORESOURCE_IRQ, + }, +}; + +struct pnx8xxx_port pnx8xxx_ports[] = { + [0] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX8550_UART_PORT0, + .mapbase = PNX8550_UART_PORT0, + .irq = PNX8550_UART_INT(0), + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .type = PORT_PNX8XXX, + .iotype = UPIO_MEM, + .membase = (void __iomem *)PNX8550_UART_PORT1, + .mapbase = PNX8550_UART_PORT1, + .irq = PNX8550_UART_INT(1), + .uartclk = 3692300, + .fifosize = 16, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, +}; + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32)0; + +static u64 uart_dmamask = ~(u32)0; + +static struct platform_device pnx8550_usb_ohci_device = { + .name = "pnx8550-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), + .resource = pnx8550_usb_ohci_resources, +}; + +static struct platform_device pnx8550_uart_device = { + .name = "pnx8xxx-uart", + .id = -1, + .dev = { + .dma_mask = &uart_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = pnx8xxx_ports, + }, + .num_resources = ARRAY_SIZE(pnx8550_uart_resources), + .resource = pnx8550_uart_resources, +}; + +static struct platform_device *pnx8550_platform_devices[] __initdata = { + &pnx8550_usb_ohci_device, + &pnx8550_uart_device, +}; + +static int __init pnx8550_platform_init(void) +{ + return platform_add_devices(pnx8550_platform_devices, + ARRAY_SIZE(pnx8550_platform_devices)); +} + +arch_initcall(pnx8550_platform_init); diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c new file mode 100644 index 00000000000..18b125e3b65 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -0,0 +1,112 @@ +/* + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) +{ + int len = 0; + int configPR = read_c0_config7(); + + if (offset==0) { + len += sprintf(&page[len], "Timer: count, compare, tc, status\n"); + len += sprintf(&page[len], " 1: %11i, %8i, %1i, %s\n", + read_c0_count(), read_c0_compare(), + (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on"); + len += sprintf(&page[len], " 2: %11i, %8i, %1i, %s\n", + read_c0_count2(), read_c0_compare2(), + (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on"); + len += sprintf(&page[len], " 3: %11i, %8i, %1i, %s\n", + read_c0_count3(), read_c0_compare3(), + (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on"); + } + + return len; +} + +static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) +{ + int len = 0; + + if (offset==0) { + len += sprintf(&page[len], "config1: %#10.8x\n", read_c0_config1()); + len += sprintf(&page[len], "config2: %#10.8x\n", read_c0_config2()); + len += sprintf(&page[len], "config3: %#10.8x\n", read_c0_config3()); + len += sprintf(&page[len], "configPR: %#10.8x\n", read_c0_config7()); + len += sprintf(&page[len], "status: %#10.8x\n", read_c0_status()); + len += sprintf(&page[len], "cause: %#10.8x\n", read_c0_cause()); + len += sprintf(&page[len], "count: %#10.8x\n", read_c0_count()); + len += sprintf(&page[len], "count_2: %#10.8x\n", read_c0_count2()); + len += sprintf(&page[len], "count_3: %#10.8x\n", read_c0_count3()); + len += sprintf(&page[len], "compare: %#10.8x\n", read_c0_compare()); + len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2()); + len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3()); + } + + return len; +} + +static struct proc_dir_entry* pnx8550_dir = NULL; +static struct proc_dir_entry* pnx8550_timers = NULL; +static struct proc_dir_entry* pnx8550_registers = NULL; + +static int pnx8550_proc_init( void ) +{ + + // Create /proc/pnx8550 + pnx8550_dir = proc_mkdir("pnx8550", NULL); + if (!pnx8550_dir) { + printk(KERN_ERR "Can't create pnx8550 proc dir\n"); + return -1; + } + + // Create /proc/pnx8550/timers + pnx8550_timers = create_proc_read_entry( + "timers", + 0, + pnx8550_dir, + pnx8550_timers_read, + NULL); + + if (!pnx8550_timers) + printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); + + // Create /proc/pnx8550/registers + pnx8550_registers = create_proc_read_entry( + "registers", + 0, + pnx8550_dir, + pnx8550_registers_read, + NULL); + + if (!pnx8550_registers) + printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); + + return 0; +} + +__initcall(pnx8550_proc_init); diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/nxp/pnx8550/common/prom.c new file mode 100644 index 00000000000..2f567452e7a --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/prom.c @@ -0,0 +1,129 @@ +/* + * + * Per Hallsmark, per.hallsmark@mvista.com + * + * Based on jmr3927/common/prom.c + * + * 2004 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include + +#include +#include + +/* #define DEBUG_CMDLINE */ + +extern int prom_argc; +extern char **prom_argv, **prom_envp; + +typedef struct +{ + char *name; +/* char *val; */ +}t_env_var; + + +char * prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + int i; + + arcs_cmdline[0] = '\0'; + for (i = 0; i < prom_argc; i++) { + strcat(arcs_cmdline, prom_argv[i]); + strcat(arcs_cmdline, " "); + } +} + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * Environment variables are stored in the form of "memsize=64". + */ + + t_env_var *env = (t_env_var *)prom_envp; + int i; + + i = strlen(envname); + + while(env->name) { + if(strncmp(envname, env->name, i) == 0) { + return(env->name + strlen(envname) + 1); + } + env++; + } + return(NULL); +} + +inline unsigned char str2hexnum(unsigned char c) +{ + if(c >= '0' && c <= '9') + return c - '0'; + if(c >= 'a' && c <= 'f') + return c - 'a' + 10; + if(c >= 'A' && c <= 'F') + return c - 'A' + 10; + return 0; /* foo */ +} + +inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for(i = 0; i < 6; i++) { + unsigned char num; + + if((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= (str2hexnum(*str++)); + ea[i] = num; + } +} + +int get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + return 0; +} + +void __init prom_free_prom_memory(void) +{ +} + +extern int pnx8550_console_port; + +/* used by early printk */ +void prom_putchar(char c) +{ + if (pnx8550_console_port != -1) { + /* Wait until FIFO not full */ + while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16) + ; + /* Send one char */ + ip3106_fifo(UART_BASE, pnx8550_console_port) = c; + } +} + +EXPORT_SYMBOL(prom_getcmdline); +EXPORT_SYMBOL(get_ethernet_addr); +EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c new file mode 100644 index 00000000000..7b2cbc5b2c7 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/reset.c @@ -0,0 +1,49 @@ +/*. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Reset the PNX8550 board. + * + */ +#include +#include +#include + +void pnx8550_machine_restart(char *command) +{ + char head[] = "************* Machine restart *************"; + char foot[] = "*******************************************"; + + printk("\n\n"); + printk("%s\n", head); + if (command != NULL) + printk("* %s\n", command); + printk("%s\n", foot); + + PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; +} + +void pnx8550_machine_halt(void) +{ + printk("*** Machine halt. (Not implemented) ***\n"); +} + +void pnx8550_machine_power_off(void) +{ + printk("*** Machine power off. (Not implemented) ***\n"); +} diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c new file mode 100644 index 00000000000..92d764c9770 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -0,0 +1,157 @@ +/* + * + * 2.6 port, Embedded Alley Solutions, Inc + * + * Based on Per Hallsmark, per.hallsmark@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +extern void __init board_setup(void); +extern void pnx8550_machine_restart(char *); +extern void pnx8550_machine_halt(void); +extern void pnx8550_machine_power_off(void); +extern struct resource ioport_resource; +extern struct resource iomem_resource; +extern void rs_kgdb_hook(int tty_no); +extern char *prom_getcmdline(void); + +struct resource standard_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, +}; + +#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources) + +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ +unsigned long get_system_mem_size(void) +{ + /* Read IP2031_RANK0_ADDR_LO */ + unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); + /* Read IP2031_RANK1_ADDR_HI */ + unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); + + return dram_r1_hi - dram_r0_lo + 1; +} + +int pnx8550_console_port = -1; + +void __init plat_mem_setup(void) +{ + int i; + char* argptr; + + board_setup(); /* board specific setup */ + + _machine_restart = pnx8550_machine_restart; + _machine_halt = pnx8550_machine_halt; + pm_power_off = pnx8550_machine_power_off; + + /* Clear the Global 2 Register, PCI Inta Output Enable Registers + Bit 1:Enable DAC Powerdown + -> 0:DACs are enabled and are working normally + 1:DACs are powerdown + Bit 0:Enable of PCI inta output + -> 0 = Disable PCI inta output + 1 = Enable PCI inta output + */ + PNX8550_GLB2_ENAB_INTA_O = 0; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + /* Request I/O space for devices on this board */ + for (i = 0; i < STANDARD_IO_RESOURCES; i++) + request_resource(&ioport_resource, standard_io_resources + i); + + /* Place the Mode Control bit for GPIO pin 16 in primary function */ + /* Pin 16 is used by UART1, UA1_TX */ + outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | + (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), + PNX8550_GPIO_MC1); + + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { + argptr += strlen("console=ttyS"); + pnx8550_console_port = *argptr == '0' ? 0 : 1; + + /* We must initialize the UART (console) before early printk */ + /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ + ip3106_lcr(UART_BASE, pnx8550_console_port) = + PNX8XXX_UART_LCR_8BIT; + ip3106_baud(UART_BASE, pnx8550_console_port) = 5; + } + +#ifdef CONFIG_KGDB + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { + int line; + argptr += strlen("kgdb=ttyS"); + line = *argptr == '0' ? 0 : 1; + rs_kgdb_hook(line); + pr_info("KGDB: Using ttyS%i for session, " + "please connect your debugger\n", line ? 1 : 0); + } +#endif + return; +} diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c new file mode 100644 index 00000000000..62f495b57f9 --- /dev/null +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -0,0 +1,150 @@ +/* + * Copyright 2001, 2002, 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Common time service routines for MIPS machines. See + * Documents/MIPS/README.txt. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include + +static unsigned long cpj; + +static cycle_t hpt_read(void) +{ + return read_c0_count2(); +} + +static struct clocksource pnx_clocksource = { + .name = "pnx8xxx", + .rating = 200, + .read = hpt_read, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *c = dev_id; + + /* clear MATCH, signal the event */ + c->event_handler(c); + + return IRQ_HANDLED; +} + +static struct irqaction pnx8xxx_timer_irq = { + .handler = pnx8xxx_timer_interrupt, + .flags = IRQF_DISABLED | IRQF_PERCPU, + .name = "pnx8xxx_timer", +}; + +static irqreturn_t monotonic_interrupt(int irq, void *dev_id) +{ + /* Timer 2 clear interrupt */ + write_c0_compare2(-1); + return IRQ_HANDLED; +} + +static struct irqaction monotonic_irqaction = { + .handler = monotonic_interrupt, + .flags = IRQF_DISABLED, + .name = "Monotonic timer", +}; + +static int pnx8xxx_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + write_c0_compare(delta); + return 0; +} + +static struct clock_event_device pnx8xxx_clockevent = { + .name = "pnx8xxx_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = pnx8xxx_set_next_event, +}; + +static inline void timer_ack(void) +{ + write_c0_compare(cpj); +} + +__init void plat_time_init(void) +{ + unsigned int configPR; + unsigned int n; + unsigned int m; + unsigned int p; + unsigned int pow2p; + + clockevents_register_device(&pnx8xxx_clockevent); + clocksource_register(&pnx_clocksource); + + /* Timer 1 start */ + configPR = read_c0_config7(); + configPR &= ~0x00000008; + write_c0_config7(configPR); + + /* Timer 2 start */ + configPR = read_c0_config7(); + configPR &= ~0x00000010; + write_c0_config7(configPR); + + /* Timer 3 stop */ + configPR = read_c0_config7(); + configPR |= 0x00000020; + write_c0_config7(configPR); + + + /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */ + /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */ + + n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16; + m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8; + p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2; + pow2p = (1 << p); + + db_assert(m != 0 && pow2p != 0); + + /* + * Compute the frequency as in the PNX8550 User Manual 1.0, p.186 + * (a.k.a. 8-10). Divide by HZ for a timer offset that results in + * HZ timer interrupts per second. + */ + mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); + cpj = (mips_hpt_frequency + HZ / 2) / HZ; + write_c0_count(0); + timer_ack(); + + /* Setup Timer 2 */ + write_c0_count2(0); + write_c0_compare2(0xffffffff); + + setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); + setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); +} diff --git a/arch/mips/nxp/pnx8550/jbs/Makefile b/arch/mips/nxp/pnx8550/jbs/Makefile new file mode 100644 index 00000000000..ad6a8ca7d8c --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/Makefile @@ -0,0 +1,4 @@ + +# Makefile for the NXP JBS Board. + +lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c new file mode 100644 index 00000000000..f92826e0096 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -0,0 +1,65 @@ +/* + * JBS Specific board startup routines. + * + * Copyright 2005, Embedded Alley Solutions, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +/* CP0 hazard avoidance. */ +#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +void __init board_setup(void) +{ + unsigned long config0, configpr; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7<<25) | (7<<28)); + config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | + (CONF_CM_DEFAULT<<28)); + write_c0_config(config0); + BARRIER; + + configpr = read_c0_config7(); + configpr |= (1<<19); /* enable tlb */ + write_c0_config7(configpr); + BARRIER; +} diff --git a/arch/mips/nxp/pnx8550/jbs/init.c b/arch/mips/nxp/pnx8550/jbs/init.c new file mode 100644 index 00000000000..d59b4a4e5e8 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/init.c @@ -0,0 +1,53 @@ +/* + * + * Copyright 2005 Embedded Alley Solutions, Inc + * source@embeddedalley.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP PNX8550/JBS"; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + //memsize = 0x02800000; /* Trimedia uses memory above */ + memsize = 0x08000000; /* Trimedia uses memory above */ + add_memory_region(0, memsize, BOOT_MEM_RAM); +} diff --git a/arch/mips/nxp/pnx8550/jbs/irqmap.c b/arch/mips/nxp/pnx8550/jbs/irqmap.c new file mode 100644 index 00000000000..7fc89842002 --- /dev/null +++ b/arch/mips/nxp/pnx8550/jbs/irqmap.c @@ -0,0 +1,35 @@ +/* + * NXP JBS board irqmap. + * + * Copyright 2005 Embedded Alley Solutions, Inc + * source@embeddealley.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +char pnx8550_irq_tab[][5] __initdata = { + [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, +}; diff --git a/arch/mips/nxp/pnx8550/stb810/Makefile b/arch/mips/nxp/pnx8550/stb810/Makefile new file mode 100644 index 00000000000..ab91d72c566 --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/Makefile @@ -0,0 +1,4 @@ + +# Makefile for the NXP STB810 Board. + +lib-y := prom_init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c new file mode 100644 index 00000000000..1282c27cfcb --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -0,0 +1,49 @@ +/* + * STB810 specific board startup routines. + * + * Based on the arch/mips/nxp/pnx8550/jbs/board_setup.c + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +void __init board_setup(void) +{ + unsigned long config0, configpr; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7<<25) | (7<<28)); + config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | + (CONF_CM_DEFAULT<<28)); + write_c0_config(config0); + + configpr = read_c0_config7(); + configpr |= (1<<19); /* enable tlb */ + write_c0_config7(configpr); +} diff --git a/arch/mips/nxp/pnx8550/stb810/irqmap.c b/arch/mips/nxp/pnx8550/stb810/irqmap.c new file mode 100644 index 00000000000..8c034963ddc --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/irqmap.c @@ -0,0 +1,22 @@ +/* + * NXP STB810 board irqmap. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include + +char pnx8550_irq_tab[][5] __initdata = { + [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, + [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, +}; diff --git a/arch/mips/nxp/pnx8550/stb810/prom_init.c b/arch/mips/nxp/pnx8550/stb810/prom_init.c new file mode 100644 index 00000000000..ca7f4ada064 --- /dev/null +++ b/arch/mips/nxp/pnx8550/stb810/prom_init.c @@ -0,0 +1,46 @@ +/* + * STB810 specific prom routines + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "NXP PNX8950/STB810"; +} + +void __init prom_init(void) +{ + unsigned long memsize; + + prom_argc = (int) fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + prom_init_cmdline(); + + memsize = 0x08000000; /* Trimedia uses memory above */ + add_memory_region(0, memsize, BOOT_MEM_RAM); +} -- cgit v1.2.3-70-g09d2