From b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 16 Dec 2008 15:29:15 -0800 Subject: gianfar: Convert gianfar to an of_platform_driver Does the same for the accompanying MDIO driver, and then modifies the TBI configuration method. The old way used fields in einfo, which no longer exists. The new way is to create an MDIO device-tree node for each instance of gianfar, and create a tbi-handle property to associate ethernet controllers with the TBI PHYs they are connected to. Signed-off-by: Andy Fleming Signed-off-by: David S. Miller --- arch/powerpc/boot/dts/ksi8560.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch/powerpc/boot/dts/ksi8560.dts') diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 49737589ffc..3bfff47418d 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -141,8 +141,26 @@ reg = <0x2>; device_type = "ethernet-phy"; }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; }; + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@24000 { device_type = "network"; model = "TSEC"; @@ -152,6 +170,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; phy-handle = <&PHY1>; }; @@ -164,6 +183,7 @@ local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; phy-handle = <&PHY2>; }; -- cgit v1.2.3-70-g09d2