From 4de124446b4d68edd6cb747495234be915d56a29 Mon Sep 17 00:00:00 2001 From: Liang Li Date: Wed, 12 Aug 2009 09:34:28 -0400 Subject: powerpc/83xx: Remove second USB node from SBC834x DTS Since only one of the SoC USB devices is brought out to a physical connector on the board, remove the 2nd (USB-DR) node from the DTS. Having it present and USB enabled will cause a hang at boot. Signed-off-by: Liang Li Signed-off-by: Yang Shi Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8349.dts | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch/powerpc/boot/dts/sbc8349.dts') diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 2d9fa68f641..d93e5beab73 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -146,18 +146,6 @@ phy_type = "ulpi"; port0; }; - /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ - usb@23000 { - device_type = "usb"; - compatible = "fsl-usb2-dr"; - reg = <0x23000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&ipic>; - interrupts = <38 0x8>; - dr_mode = "otg"; - phy_type = "ulpi"; - }; enet0: ethernet@24000 { #address-cells = <1>; -- cgit v1.2.3-70-g09d2