From fd066e850351e21d1b385cde35fadf66761bc053 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 02:02:36 +0200 Subject: powerpc/mpc8308: fix USB DR controller initialization MPC8308 has ULPI pin muxing settings in SICRH register, bits 17-18 which is different from both MPC8313 and MPC8315. Also MPC8308 doesn't have REFSEL, UTMI_PHY_EN and OTG_PORT fields in the USB DR controller CONTROL register. Signed-off-by: Ilya Yanok Tested-by: Wolfgang Denk Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8308rdb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index a97eb2db5a1..1e2b8889944 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -109,7 +109,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - compatible = "fsl,mpc8315-immr", "simple-bus"; + compatible = "fsl,mpc8308-immr", "simple-bus"; ranges = <0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; -- cgit v1.2.3-70-g09d2 From b2e0861e51f2961954330dcafe6d148ee3ab5cff Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 3 Dec 2010 10:52:14 -0600 Subject: powerpc/85xx: fix compatible properties of the P1022DS DMA nodes used for audio In order to prevent the fsl_dma driver from claiming the DMA channels that the P1022DS audio driver needs, the compatible properties for those nodes must say "fsl,ssi-dma-channel" instead of "fsl,eloplus-dma-channel". Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/p1022ds.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/boot/dts') diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 2bbecbb4cbf..69422eb24d9 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -291,13 +291,13 @@ ranges = <0x0 0xc100 0x200>; cell-index = <1>; dma00: dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupts = <76 2>; }; dma01: dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupts = <77 2>; -- cgit v1.2.3-70-g09d2