From 33959f88fce9b8d3346d8000b3425814cbc6d6c0 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Thu, 18 Jul 2013 11:31:51 +1000
Subject: powerpc: Add second POWER8 PVR entry

POWER8 comes with two different PVRs.  This patch enables the additional
PVR in the cputable.

The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry
(PVR=0x4d) is given POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c  | 20 +++++++++++++++++++-
 arch/powerpc/kernel/prom_init.c |  5 +++--
 2 files changed, 22 insertions(+), 3 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a45d0f0438..22973a74df7 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -494,9 +494,27 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
-	{	/* Power8 */
+	{	/* Power8E */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x004b0000,
+		.cpu_name		= "POWER8E (raw)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.cpu_user_features2	= COMMON_USER2_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power8",
+		.oprofile_type		= PPC_OPROFILE_INVALID,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
+	{	/* Power8 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x004d0000,
 		.cpu_name		= "POWER8 (raw)",
 		.cpu_features		= CPU_FTRS_POWER8,
 		.cpu_user_features	= COMMON_USER_POWER8,
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5eccda9fd33..607902424e7 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -644,7 +644,8 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
-	W(0xffff0000), W(0x004b0000),	/* POWER8 */
+	W(0xffff0000), W(0x004b0000),	/* POWER8E */
+	W(0xffff0000), W(0x004d0000),	/* POWER8 */
 	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
@@ -706,7 +707,7 @@ unsigned char ibm_architecture_vec[] = {
 	 * must match by the macro below. Update the definition if
 	 * the structure layout changes.
 	 */
-#define IBM_ARCH_VEC_NRCORES_OFFSET	117
+#define IBM_ARCH_VEC_NRCORES_OFFSET	125
 	W(NR_CPUS),			/* number of cores supported */
 	0,
 	0,
-- 
cgit v1.2.3-70-g09d2


From 0e0ed6406e61434d3f38fb58aa8464ec4722b77e Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 15 Jul 2013 14:04:50 +1000
Subject: powerpc/modules: Module CRC relocation fix causes perf issues

Module CRCs are implemented as absolute symbols that get resolved by
a linker script. We build an intermediate .o that contains an
unresolved symbol for each CRC. genksysms parses this .o, calculates
the CRCs and writes a linker script that "resolves" the symbols to
the calculated CRC.

Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols
that need relocating and relocates them at boot. Commit d4703aef
(module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y)
added a hook to reverse the bogus relocations. Part of this patch
created a symbol at 0x0:

# head -2 /proc/kallsyms
0000000000000000 T reloc_start
c000000000000000 T .__start

This reloc_start symbol is causing lots of confusion to perf. It
thinks reloc_start is a massive function that stretches from 0x0 to
0xc000000000000000 and we get various cryptic errors out of perf,
including:

problem incrementing symbol count, skipping event

This patch removes the  reloc_start linker script label and instead
defines it as PHYSICAL_START. We also need to wrap it with
CONFIG_PPC64 because the ppc32 kernel can set a non zero
PHYSICAL_START at compile time and we wouldn't want to subtract
it from the CRCs in that case.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/module.h | 5 ++---
 arch/powerpc/kernel/vmlinux.lds.S | 3 ---
 2 files changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index c1df590ec44..49fa55bfbac 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -82,10 +82,9 @@ struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,
 		   struct exception_table_entry *finish);
 
-#ifdef CONFIG_MODVERSIONS
+#if defined(CONFIG_MODVERSIONS) && defined(CONFIG_PPC64)
 #define ARCH_RELOCATES_KCRCTAB
-
-extern const unsigned long reloc_start[];
+#define reloc_start PHYSICAL_START
 #endif
 #endif /* __KERNEL__ */
 #endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 654e479802f..f096e72262f 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -38,9 +38,6 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-	. = 0;
-	reloc_start = .;
-
 	. = KERNELBASE;
 
 /*
-- 
cgit v1.2.3-70-g09d2


From 0ba178888b05a4efdaca7da528c170bd09f9687b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:51 +0800
Subject: powerpc/eeh: Remove reference to PCI device

We will rely on pcibios_release_device() to remove the EEH cache
and unbind EEH device for the specific PCI device. So we shouldn't
hold the reference to the PCI device from EEH cache and EEH device.
Otherwise, pcibios_release_device() won't be called as we expected.
The patch removes the reference to the PCI device in EEH core.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c       |  4 ----
 arch/powerpc/kernel/eeh_cache.c | 18 +++++-------------
 2 files changed, 5 insertions(+), 17 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 39954fe941b..b5c425ea297 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -499,8 +499,6 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon
 	}
 
 	eeh_dev_check_failure(edev);
-
-	pci_dev_put(eeh_dev_to_pci_dev(edev));
 	return val;
 }
 
@@ -904,7 +902,6 @@ static void eeh_add_device_late(struct pci_dev *dev)
 	}
 	WARN_ON(edev->pdev);
 
-	pci_dev_get(dev);
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
 
@@ -992,7 +989,6 @@ static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 	}
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
-	pci_dev_put(dev);
 
 	eeh_rmv_from_parent_pe(edev, purge_pe);
 	eeh_addr_cache_rmv_dev(dev);
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index f9ac1232a74..e8c9fd546a5 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -68,16 +68,12 @@ static inline struct eeh_dev *__eeh_addr_cache_get_device(unsigned long addr)
 		struct pci_io_addr_range *piar;
 		piar = rb_entry(n, struct pci_io_addr_range, rb_node);
 
-		if (addr < piar->addr_lo) {
+		if (addr < piar->addr_lo)
 			n = n->rb_left;
-		} else {
-			if (addr > piar->addr_hi) {
-				n = n->rb_right;
-			} else {
-				pci_dev_get(piar->pcidev);
-				return piar->edev;
-			}
-		}
+		else if (addr > piar->addr_hi)
+			n = n->rb_right;
+		else
+			return piar->edev;
 	}
 
 	return NULL;
@@ -156,7 +152,6 @@ eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo,
 	if (!piar)
 		return NULL;
 
-	pci_dev_get(dev);
 	piar->addr_lo = alo;
 	piar->addr_hi = ahi;
 	piar->edev = pci_dev_to_eeh_dev(dev);
@@ -250,7 +245,6 @@ restart:
 
 		if (piar->pcidev == dev) {
 			rb_erase(n, &pci_io_addr_cache_root.rb_root);
-			pci_dev_put(piar->pcidev);
 			kfree(piar);
 			goto restart;
 		}
@@ -302,12 +296,10 @@ void eeh_addr_cache_build(void)
 		if (!edev)
 			continue;
 
-		pci_dev_get(dev);  /* matching put is in eeh_remove_device() */
 		dev->dev.archdata.edev = edev;
 		edev->pdev = dev;
 
 		eeh_addr_cache_insert_dev(dev);
-
 		eeh_sysfs_add_device(dev);
 	}
 
-- 
cgit v1.2.3-70-g09d2


From f2856491d24044de08da9e53cf7068841a8b4e1c Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:52 +0800
Subject: powerpc/eeh: Export functions for hotplug

Make some functions public in order to support hotplug on either specific
PCI bus or PCI device in future.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h | 9 +++++++++
 arch/powerpc/kernel/eeh.c      | 6 +++---
 2 files changed, 12 insertions(+), 3 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 09a8743143f..d9d35c27de2 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -209,9 +209,12 @@ unsigned long eeh_check_failure(const volatile void __iomem *token,
 				unsigned long val);
 int eeh_dev_check_failure(struct eeh_dev *edev);
 void eeh_addr_cache_build(void);
+void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
+void eeh_remove_device(struct pci_dev *, int);
 void eeh_remove_bus_device(struct pci_dev *, int);
 
 /**
@@ -252,12 +255,18 @@ static inline unsigned long eeh_check_failure(const volatile void __iomem *token
 
 static inline void eeh_addr_cache_build(void) { }
 
+static inline void eeh_add_device_early(struct device_node *dn) { }
+
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
+static inline void eeh_remove_device(struct pci_dev *dev, int purge_pe) { }
+
 static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index b5c425ea297..582ad1ef46a 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -836,7 +836,7 @@ core_initcall_sync(eeh_init);
  * on the CEC architecture, type of the device, on earlier boot
  * command-line arguments & etc.
  */
-static void eeh_add_device_early(struct device_node *dn)
+void eeh_add_device_early(struct device_node *dn)
 {
 	struct pci_controller *phb;
 
@@ -884,7 +884,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-static void eeh_add_device_late(struct pci_dev *dev)
+void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct eeh_dev *edev;
@@ -972,7 +972,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-static void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 {
 	struct eeh_dev *edev;
 
-- 
cgit v1.2.3-70-g09d2


From 008a4938ea07db071f03adffaa3a78c2fbbcde6b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:53 +0800
Subject: powerpc/pci: Override pcibios_release_device()

The patch overrides pcibios_release_device() to release EEH
resources (EEH cache, unbinding EEH device) for the indicated PCI
device.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-hotplug.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3f608800c06..3dab2f2801b 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -21,6 +21,17 @@
 #include <asm/firmware.h>
 #include <asm/eeh.h>
 
+/**
+ * pcibios_release_device - release PCI device
+ * @dev: PCI device
+ *
+ * The function is called before releasing the indicated PCI device.
+ */
+void pcibios_release_device(struct pci_dev *dev)
+{
+	eeh_remove_device(dev, 1);
+}
+
 /**
  * __pcibios_remove_pci_devices - remove all devices under this bus
  * @bus: the indicated PCI bus
-- 
cgit v1.2.3-70-g09d2


From 807a827d4e7455a40e8f56ec2a67c57a91cab9f7 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:55 +0800
Subject: powerpc/eeh: Keep PE during hotplug

When we do normal hotplug, the PE (shadow EEH structure) shouldn't be
kept around.

However, we need to keep it if the hotplug an artifial one caused by
EEH errors recovery.

Since we remove EEH device through the PCI hook pcibios_release_device(),
the flag "purge_pe" passed to various functions is meaningless. So the patch
removes the meaningless flag and introduce new flag "EEH_PE_KEEP"
to save the PE while doing hotplug during EEH error recovery.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h        | 11 +++++------
 arch/powerpc/include/asm/pci-bridge.h |  1 -
 arch/powerpc/kernel/eeh.c             | 28 ++--------------------------
 arch/powerpc/kernel/eeh_driver.c      |  7 +++++--
 arch/powerpc/kernel/eeh_pe.c          |  7 +++----
 arch/powerpc/kernel/pci-hotplug.c     | 26 +++++---------------------
 6 files changed, 20 insertions(+), 60 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index d9d35c27de2..2ce22d7b71a 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -55,6 +55,8 @@ struct device_node;
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
 #define EEH_PE_PHB_DEAD		(1 << 2)	/* Dead PHB		*/
 
+#define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
+
 struct eeh_pe {
 	int type;			/* PE type: PHB/Bus/Device	*/
 	int state;			/* PE EEH dependent mode	*/
@@ -193,7 +195,7 @@ int eeh_phb_pe_create(struct pci_controller *phb);
 struct eeh_pe *eeh_phb_pe_get(struct pci_controller *phb);
 struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
 int eeh_add_to_parent_pe(struct eeh_dev *edev);
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe);
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
 void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag);
@@ -214,8 +216,7 @@ void eeh_add_device_tree_early(struct device_node *);
 void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 void eeh_add_sysfs_files(struct pci_bus *);
-void eeh_remove_device(struct pci_dev *, int);
-void eeh_remove_bus_device(struct pci_dev *, int);
+void eeh_remove_device(struct pci_dev *);
 
 /**
  * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
@@ -265,9 +266,7 @@ static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
 
 static inline void eeh_add_sysfs_files(struct pci_bus *bus) { }
 
-static inline void eeh_remove_device(struct pci_dev *dev, int purge_pe) { }
-
-static inline void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe) { }
+static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 #define EEH_POSSIBLE_ERROR(val, type) (0)
 #define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 2c1d8cb9b26..32d0d2018fa 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -209,7 +209,6 @@ static inline struct eeh_dev *of_node_to_eeh_dev(struct device_node *dn)
 extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
 
 /** Remove all of the PCI devices under this bus */
-extern void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe);
 extern void pcibios_remove_pci_devices(struct pci_bus *bus);
 
 /** Discover new pci devices under this bus, and add them */
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 582ad1ef46a..ce81477316b 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -964,7 +964,6 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
 /**
  * eeh_remove_device - Undo EEH setup for the indicated pci device
  * @dev: pci device to be removed
- * @purge_pe: remove the PE or not
  *
  * This routine should be called when a device is removed from
  * a running system (e.g. by hotplug or dlpar).  It unregisters
@@ -972,7 +971,7 @@ EXPORT_SYMBOL_GPL(eeh_add_sysfs_files);
  * this device will no longer be detected after this call; thus,
  * i/o errors affecting this slot may leave this device unusable.
  */
-void eeh_remove_device(struct pci_dev *dev, int purge_pe)
+void eeh_remove_device(struct pci_dev *dev)
 {
 	struct eeh_dev *edev;
 
@@ -990,34 +989,11 @@ void eeh_remove_device(struct pci_dev *dev, int purge_pe)
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
 
-	eeh_rmv_from_parent_pe(edev, purge_pe);
+	eeh_rmv_from_parent_pe(edev);
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
 }
 
-/**
- * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device
- * @dev: PCI device
- * @purge_pe: remove the corresponding PE or not
- *
- * This routine must be called when a device is removed from the
- * running system through hotplug or dlpar. The corresponding
- * PCI address cache will be removed.
- */
-void eeh_remove_bus_device(struct pci_dev *dev, int purge_pe)
-{
-	struct pci_bus *bus = dev->subordinate;
-	struct pci_dev *child, *tmp;
-
-	eeh_remove_device(dev, purge_pe);
-
-	if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
-			 eeh_remove_bus_device(child, purge_pe);
-	}
-}
-EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
-
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
 	if (0 == eeh_subsystem_enabled) {
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 2b1ce17cae5..9ef3bbb8580 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -362,8 +362,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * devices are expected to be attached soon when calling
 	 * into pcibios_add_pci_devices().
 	 */
-	if (bus)
-		__pcibios_remove_pci_devices(bus, 0);
+	if (bus) {
+		eeh_pe_state_mark(pe, EEH_PE_KEEP);
+		pcibios_remove_pci_devices(bus);
+	}
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
@@ -386,6 +388,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	if (bus) {
 		ssleep(5);
 		pcibios_add_pci_devices(bus);
+		eeh_pe_state_clear(pe, EEH_PE_KEEP);
 	}
 
 	pe->tstamp = tstamp;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 016588a6f5e..32ef40940ba 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -333,7 +333,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 		while (parent) {
 			if (!(parent->type & EEH_PE_INVALID))
 				break;
-			parent->type &= ~EEH_PE_INVALID;
+			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
 			parent = parent->parent;
 		}
 		pr_debug("EEH: Add %s to Device PE#%x, Parent PE#%x\n",
@@ -397,14 +397,13 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 /**
  * eeh_rmv_from_parent_pe - Remove one EEH device from the associated PE
  * @edev: EEH device
- * @purge_pe: remove PE or not
  *
  * The PE hierarchy tree might be changed when doing PCI hotplug.
  * Also, the PCI devices or buses could be removed from the system
  * during EEH recovery. So we have to call the function remove the
  * corresponding PE accordingly if necessary.
  */
-int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
+int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 {
 	struct eeh_pe *pe, *parent, *child;
 	int cnt;
@@ -431,7 +430,7 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev, int purge_pe)
 		if (pe->type & EEH_PE_PHB)
 			break;
 
-		if (purge_pe) {
+		if (!(pe->state & EEH_PE_KEEP)) {
 			if (list_empty(&pe->edevs) &&
 			    list_empty(&pe->child_list)) {
 				list_del(&pe->child);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 3dab2f2801b..fc0831d4971 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -29,49 +29,33 @@
  */
 void pcibios_release_device(struct pci_dev *dev)
 {
-	eeh_remove_device(dev, 1);
+	eeh_remove_device(dev);
 }
 
 /**
- * __pcibios_remove_pci_devices - remove all devices under this bus
+ * pcibios_remove_pci_devices - remove all devices under this bus
  * @bus: the indicated PCI bus
- * @purge_pe: destroy the PE on removal of PCI devices
  *
  * Remove all of the PCI devices under this bus both from the
  * linux pci device tree, and from the powerpc EEH address cache.
- * By default, the corresponding PE will be destroied during the
- * normal PCI hotplug path. For PCI hotplug during EEH recovery,
- * the corresponding PE won't be destroied and deallocated.
  */
-void __pcibios_remove_pci_devices(struct pci_bus *bus, int purge_pe)
+void pcibios_remove_pci_devices(struct pci_bus *bus)
 {
 	struct pci_dev *dev, *tmp;
 	struct pci_bus *child_bus;
 
 	/* First go down child busses */
 	list_for_each_entry(child_bus, &bus->children, node)
-		__pcibios_remove_pci_devices(child_bus, purge_pe);
+		pcibios_remove_pci_devices(child_bus);
 
 	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
 		 pci_domain_nr(bus),  bus->number);
 	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
-		pr_debug("     * Removing %s...\n", pci_name(dev));
-		eeh_remove_bus_device(dev, purge_pe);
+		pr_debug("   Removing %s...\n", pci_name(dev));
 		pci_stop_and_remove_bus_device(dev);
 	}
 }
 
-/**
- * pcibios_remove_pci_devices - remove all devices under this bus
- * @bus: the indicated PCI bus
- *
- * Remove all of the PCI devices under this bus both from the
- * linux pci device tree, and from the powerpc EEH address cache.
- */
-void pcibios_remove_pci_devices(struct pci_bus *bus)
-{
-	__pcibios_remove_pci_devices(bus, 1);
-}
 EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
 
 /**
-- 
cgit v1.2.3-70-g09d2


From 9feed42e93d2625db86423cedf8b4b2bed00779e Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:56 +0800
Subject: powerpc/eeh: Use safe list traversal when walking EEH devices

Currently, we're trasversing the EEH devices list using list_for_each_entry().
That's not safe enough because the EEH devices might be removed from
its parent PE while doing iteration. The patch replaces that with
list_for_each_entry_safe().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h |  4 ++--
 arch/powerpc/kernel/eeh.c      |  4 ++--
 arch/powerpc/kernel/eeh_pe.c   | 10 +++++-----
 3 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 2ce22d7b71a..e8c411b63ca 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -74,8 +74,8 @@ struct eeh_pe {
 	struct list_head child;		/* Child PEs			*/
 };
 
-#define eeh_pe_for_each_dev(pe, edev) \
-		list_for_each_entry(edev, &pe->edevs, list)
+#define eeh_pe_for_each_dev(pe, edev, tmp) \
+		list_for_each_entry_safe(edev, tmp, &pe->edevs, list)
 
 /*
  * The struct is used to trace EEH state for the associated
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ce81477316b..56bd4584f61 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -231,7 +231,7 @@ static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len)
 void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 {
 	size_t loglen = 0;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	bool valid_cfg_log = true;
 
 	/*
@@ -251,7 +251,7 @@ void eeh_slot_error_detail(struct eeh_pe *pe, int severity)
 		eeh_pe_restore_bars(pe);
 
 		pci_regs_buf[0] = 0;
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			loglen += eeh_gather_pci_data(edev, pci_regs_buf + loglen,
 						      EEH_PCI_REGS_LOG_LEN - loglen);
 		}
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 32ef40940ba..c8b815e45c8 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -176,7 +176,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
-	struct eeh_dev *edev;
+	struct eeh_dev *edev, *tmp;
 	void *ret;
 
 	if (!root) {
@@ -186,7 +186,7 @@ void *eeh_pe_dev_traverse(struct eeh_pe *root,
 
 	/* Traverse root PE */
 	for (pe = root; pe; pe = eeh_pe_next(pe, root)) {
-		eeh_pe_for_each_dev(pe, edev) {
+		eeh_pe_for_each_dev(pe, edev, tmp) {
 			ret = fn(edev, flag);
 			if (ret)
 				return ret;
@@ -501,7 +501,7 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 {
 	struct eeh_pe *pe = (struct eeh_pe *)data;
 	int state = *((int *)flag);
-	struct eeh_dev *tmp;
+	struct eeh_dev *edev, *tmp;
 	struct pci_dev *pdev;
 
 	/*
@@ -511,8 +511,8 @@ static void *__eeh_pe_state_mark(void *data, void *flag)
 	 * the PCI device driver.
 	 */
 	pe->state |= state;
-	eeh_pe_for_each_dev(pe, tmp) {
-		pdev = eeh_dev_to_pci_dev(tmp);
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		pdev = eeh_dev_to_pci_dev(edev);
 		if (pdev)
 			pdev->error_state = pci_channel_io_frozen;
 	}
-- 
cgit v1.2.3-70-g09d2


From ab444ec97e8bd65fff9d489b9a409fc03979268b Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:57 +0800
Subject: powerpc/pci: Partial tree hotplug support

When EEH error happens to one specific PE, the device drivers
of its attached EEH devices (PCI devices) are checked to see
the further action: reset with complete hotplug, or reset without
hotplug. However, that's not enough for those PCI devices whose
drivers can't support EEH, or those PCI devices without driver.
So we need do so-called "partial hotplug" on basis of PCI devices.
In the situation, part of PCI devices of the specific PE are
unplugged and plugged again after PE reset.

The patch changes pcibios_add_pci_devices() so that it can support
full hotplug and so-called "partial" hotplug based on device-tree
or real hardware. It's notable that pci_of_scan.c has been changed
for a bit in order to support the "partial" hotplug based on dev-tree.

Most of the generic code already supports that, we just need to
plumb it properly on our side.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c  |  2 ++
 arch/powerpc/kernel/pci-hotplug.c | 14 ++++++----
 arch/powerpc/kernel/pci_of_scan.c | 56 ++++++++++++++++++++++++++++-----------
 3 files changed, 51 insertions(+), 21 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f46914a0f33..7d22a675fe1 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus)
 	/* Allocate bus and devices resources */
 	pcibios_allocate_bus_resources(bus);
 	pcibios_claim_one_bus(bus);
+	if (!pci_has_flag(PCI_PROBE_ONLY))
+		pci_assign_unassigned_bus_resources(bus);
 
 	/* Fixup EEH */
 	eeh_add_device_tree_late(bus);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index fc0831d4971..c1e17ae68a0 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices);
  */
 void pcibios_add_pci_devices(struct pci_bus * bus)
 {
-	int slotno, num, mode, pass, max;
+	int slotno, mode, pass, max;
 	struct pci_dev *dev;
 	struct device_node *dn = pci_bus_to_OF_node(bus);
 
@@ -85,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
 		/* use ofdt-based probe */
 		of_rescan_bus(dn, bus);
 	} else if (mode == PCI_PROBE_NORMAL) {
-		/* use legacy probe */
+		/*
+		 * Use legacy probe. In the partial hotplug case, we
+		 * probably have grandchildren devices unplugged. So
+		 * we don't check the return value from pci_scan_slot() in
+		 * order for fully rescan all the way down to pick them up.
+		 * They can have been removed during partial hotplug.
+		 */
 		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		if (!num)
-			return;
+		pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
 		pcibios_setup_bus_devices(bus);
 		max = bus->busn_res.start;
 		for (pass = 0; pass < 2; pass++) {
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 6b0ba5854d9..15d9105323b 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 		return;
 	}
 
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]);
 	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
+		bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+		if (!bus) {
+			printk(KERN_ERR "Failed to create pci bus for %s\n",
+			       node->full_name);
+			return;
+		}
 	}
 
 	bus->primary = dev->bus->number;
@@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev)
 }
 EXPORT_SYMBOL(of_scan_pci_bridge);
 
+static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus,
+			    struct device_node *dn)
+{
+	struct pci_dev *dev = NULL;
+	const u32 *reg;
+	int reglen, devfn;
+
+	pr_debug("  * %s\n", dn->full_name);
+	if (!of_device_is_available(dn))
+		return NULL;
+
+	reg = of_get_property(dn, "reg", &reglen);
+	if (reg == NULL || reglen < 20)
+		return NULL;
+	devfn = (reg[0] >> 8) & 0xff;
+
+	/* Check if the PCI device is already there */
+	dev = pci_get_slot(bus, devfn);
+	if (dev) {
+		pci_dev_put(dev);
+		return dev;
+	}
+
+	/* create a new pci_dev for this device */
+	dev = of_create_pci_dev(dn, bus, devfn);
+	if (!dev)
+		return NULL;
+
+	pr_debug("  dev header type: %x\n", dev->hdr_type);
+	return dev;
+}
+
 /**
  * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
  * @node: device tree node for the PCI bus
@@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 			  int rescan_existing)
 {
 	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
 	struct pci_dev *dev;
 
 	pr_debug("of_scan_bus(%s) bus no %d...\n",
@@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus,
 
 	/* Scan direct children */
 	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		if (!of_device_is_available(child))
-			continue;
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
+		dev = of_scan_pci_dev(bus, child);
 		if (!dev)
 			continue;
 		pr_debug("    dev header type: %x\n", dev->hdr_type);
-- 
cgit v1.2.3-70-g09d2


From f5c57710dd62dd06f176934a8b4b8accbf00f9f8 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:58 +0800
Subject: powerpc/eeh: Use partial hotplug for EEH unaware drivers

When EEH error happens to one specific PE, some devices with drivers
supporting EEH won't except hotplug on the device. However, there
might have other deivces without driver, or with driver without EEH
support. For the case, we need do partial hotplug in order to make
sure that the PE becomes absolutely quite during reset. Otherise,
the PE reset might fail and leads to failure of error recovery.

The current code doesn't handle that 'mixed' case properly, it either
uses the error callbacks to the drivers, or tries hotplug, but doesn't
handle a PE (EEH domain) composed of a combination of the two.

The patch intends to support so-called "partial" hotplug for EEH:
Before we do reset, we stop and remove those PCI devices without
EEH sensitive driver. The corresponding EEH devices are not detached
from its PE, but with special flag. After the reset is done, those
EEH devices with the special flag will be scanned one by one.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  6 ++-
 arch/powerpc/kernel/eeh.c                    | 30 +++++++++--
 arch/powerpc/kernel/eeh_driver.c             | 74 ++++++++++++++++++++++++++--
 arch/powerpc/kernel/eeh_pe.c                 | 20 +++-----
 arch/powerpc/kernel/eeh_sysfs.c              |  7 +++
 arch/powerpc/platforms/powernv/eeh-powernv.c |  2 +-
 arch/powerpc/platforms/pseries/eeh_pseries.c |  2 +-
 7 files changed, 117 insertions(+), 24 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index e8c411b63ca..f54a60131de 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -84,7 +84,8 @@ struct eeh_pe {
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_DEV_IRQ_DISABLED	(1<<0)	/* Interrupt disabled		*/
+#define EEH_DEV_IRQ_DISABLED	(1 << 0)	/* Interrupt disabled	*/
+#define EEH_DEV_DISCONNECTED	(1 << 1)	/* Removing from PE	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -97,6 +98,7 @@ struct eeh_dev {
 	struct pci_controller *phb;	/* Associated PHB		*/
 	struct device_node *dn;		/* Associated device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
+	struct pci_bus *bus;		/* PCI bus for partial hotplug	*/
 };
 
 static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev)
@@ -197,6 +199,8 @@ struct eeh_pe *eeh_pe_get(struct eeh_dev *edev);
 int eeh_add_to_parent_pe(struct eeh_dev *edev);
 int eeh_rmv_from_parent_pe(struct eeh_dev *edev);
 void eeh_pe_update_time_stamp(struct eeh_pe *pe);
+void *eeh_pe_traverse(struct eeh_pe *root,
+		eeh_traverse_func fn, void *flag);
 void *eeh_pe_dev_traverse(struct eeh_pe *root,
 		eeh_traverse_func fn, void *flag);
 void eeh_pe_restore_bars(struct eeh_pe *pe);
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 56bd4584f61..a5783f1a7a9 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -900,7 +900,21 @@ void eeh_add_device_late(struct pci_dev *dev)
 		pr_debug("EEH: Already referenced !\n");
 		return;
 	}
-	WARN_ON(edev->pdev);
+
+	/*
+	 * The EEH cache might not be removed correctly because of
+	 * unbalanced kref to the device during unplug time, which
+	 * relies on pcibios_release_device(). So we have to remove
+	 * that here explicitly.
+	 */
+	if (edev->pdev) {
+		eeh_rmv_from_parent_pe(edev);
+		eeh_addr_cache_rmv_dev(edev->pdev);
+		eeh_sysfs_remove_device(edev->pdev);
+
+		edev->pdev = NULL;
+		dev->dev.archdata.edev = NULL;
+	}
 
 	edev->pdev = dev;
 	dev->dev.archdata.edev = edev;
@@ -982,14 +996,24 @@ void eeh_remove_device(struct pci_dev *dev)
 	/* Unregister the device with the EEH/PCI address search system */
 	pr_debug("EEH: Removing device %s\n", pci_name(dev));
 
-	if (!edev || !edev->pdev) {
+	if (!edev || !edev->pdev || !edev->pe) {
 		pr_debug("EEH: Not referenced !\n");
 		return;
 	}
+
+	/*
+	 * During the hotplug for EEH error recovery, we need the EEH
+	 * device attached to the parent PE in order for BAR restore
+	 * a bit later. So we keep it for BAR restore and remove it
+	 * from the parent PE during the BAR resotre.
+	 */
 	edev->pdev = NULL;
 	dev->dev.archdata.edev = NULL;
+	if (!(edev->pe->state & EEH_PE_KEEP))
+		eeh_rmv_from_parent_pe(edev);
+	else
+		edev->mode |= EEH_DEV_DISCONNECTED;
 
-	eeh_rmv_from_parent_pe(edev);
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
 }
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 9ef3bbb8580..9fda75d1f5a 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -338,6 +338,54 @@ static void *eeh_report_failure(void *data, void *userdata)
 	return NULL;
 }
 
+static void *eeh_rmv_device(void *data, void *userdata)
+{
+	struct pci_driver *driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	int *removed = (int *)userdata;
+
+	/*
+	 * Actually, we should remove the PCI bridges as well.
+	 * However, that's lots of complexity to do that,
+	 * particularly some of devices under the bridge might
+	 * support EEH. So we just care about PCI devices for
+	 * simplicity here.
+	 */
+	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+		return NULL;
+	driver = eeh_pcid_get(dev);
+	if (driver && driver->err_handler)
+		return NULL;
+
+	/* Remove it from PCI subsystem */
+	pr_debug("EEH: Removing %s without EEH sensitive driver\n",
+		 pci_name(dev));
+	edev->bus = dev->bus;
+	edev->mode |= EEH_DEV_DISCONNECTED;
+	(*removed)++;
+
+	pci_stop_and_remove_bus_device(dev);
+
+	return NULL;
+}
+
+static void *eeh_pe_detach_dev(void *data, void *userdata)
+{
+	struct eeh_pe *pe = (struct eeh_pe *)data;
+	struct eeh_dev *edev, *tmp;
+
+	eeh_pe_for_each_dev(pe, edev, tmp) {
+		if (!(edev->mode & EEH_DEV_DISCONNECTED))
+			continue;
+
+		edev->mode &= ~(EEH_DEV_DISCONNECTED | EEH_DEV_IRQ_DISABLED);
+		eeh_rmv_from_parent_pe(edev);
+	}
+
+	return NULL;
+}
+
 /**
  * eeh_reset_device - Perform actual reset of a pci slot
  * @pe: EEH PE
@@ -349,8 +397,9 @@ static void *eeh_report_failure(void *data, void *userdata)
  */
 static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 {
+	struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
 	struct timeval tstamp;
-	int cnt, rc;
+	int cnt, rc, removed = 0;
 
 	/* pcibios will clear the counter; save the value */
 	cnt = pe->freeze_count;
@@ -362,10 +411,11 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * devices are expected to be attached soon when calling
 	 * into pcibios_add_pci_devices().
 	 */
-	if (bus) {
-		eeh_pe_state_mark(pe, EEH_PE_KEEP);
+	eeh_pe_state_mark(pe, EEH_PE_KEEP);
+	if (bus)
 		pcibios_remove_pci_devices(bus);
-	}
+	else if (frozen_bus)
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
 
 	/* Reset the pci controller. (Asserts RST#; resets config space).
 	 * Reconfigure bridges and devices. Don't try to bring the system
@@ -386,10 +436,24 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 * potentially weird things happen.
 	 */
 	if (bus) {
+		pr_info("EEH: Sleep 5s ahead of complete hotplug\n");
 		ssleep(5);
+
+		/*
+		 * The EEH device is still connected with its parent
+		 * PE. We should disconnect it so the binding can be
+		 * rebuilt when adding PCI devices.
+		 */
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
 		pcibios_add_pci_devices(bus);
-		eeh_pe_state_clear(pe, EEH_PE_KEEP);
+	} else if (frozen_bus && removed) {
+		pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
+		ssleep(5);
+
+		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
+		pcibios_add_pci_devices(frozen_bus);
 	}
+	eeh_pe_state_clear(pe, EEH_PE_KEEP);
 
 	pe->tstamp = tstamp;
 	pe->freeze_count = cnt;
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index c8b815e45c8..2aa955ae01a 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -149,8 +149,8 @@ static struct eeh_pe *eeh_pe_next(struct eeh_pe *pe,
  * callback returns something other than NULL, or no more PEs
  * to be traversed.
  */
-static void *eeh_pe_traverse(struct eeh_pe *root,
-			eeh_traverse_func fn, void *flag)
+void *eeh_pe_traverse(struct eeh_pe *root,
+		      eeh_traverse_func fn, void *flag)
 {
 	struct eeh_pe *pe;
 	void *ret;
@@ -409,8 +409,8 @@ int eeh_rmv_from_parent_pe(struct eeh_dev *edev)
 	int cnt;
 
 	if (!edev->pe) {
-		pr_warning("%s: No PE found for EEH device %s\n",
-			__func__, edev->dn->full_name);
+		pr_debug("%s: No PE found for EEH device %s\n",
+			 __func__, edev->dn->full_name);
 		return -EEXIST;
 	}
 
@@ -728,18 +728,12 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
  */
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
-	struct pci_dev *pdev = NULL;
 	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
 	struct device_node *dn = eeh_dev_to_of_node(edev);
 
-	/* Trace the PCI bridge */
-	if (eeh_probe_mode_dev()) {
-		pdev = eeh_dev_to_pci_dev(edev);
-		if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
-                        pdev = NULL;
-        }
-
-	if (pdev)
+	/* Do special restore for bridges */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		eeh_restore_bridge_bars(pdev, edev, dn);
 	else
 		eeh_restore_device_bars(edev, dn);
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index e7ae3484918..61e2a145213 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -68,6 +68,13 @@ void eeh_sysfs_add_device(struct pci_dev *pdev)
 
 void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
+	/*
+	 * The parent directory might have been removed. We needn't
+	 * continue for that case.
+	 */
+	if (!pdev->dev.kobj.sd)
+		return;
+
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 969cce73055..a380428cf9c 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -114,7 +114,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * the root bridge. So it's not reasonable to continue
 	 * the probing.
 	 */
-	if (!dn || !edev)
+	if (!dn || !edev || edev->pe)
 		return 0;
 
 	/* Skip for PCI-ISA bridge */
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index b456b157d33..0f44f9fe49a 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -153,7 +153,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 
 	/* Retrieve OF node and eeh device */
 	edev = of_node_to_eeh_dev(dn);
-	if (!of_device_is_available(dn))
+	if (edev->pe || !of_device_is_available(dn))
 		return NULL;
 
 	/* Retrieve class/vendor/device IDs */
-- 
cgit v1.2.3-70-g09d2


From 4b83bd452f17582c8d1c916568fd28a237a2eb46 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:24:59 +0800
Subject: powerpc/eeh: Don't use pci_dev during BAR restore

While restoring BARs for one specific PCI device, the pci_dev
instance should have been released. So it's not reliable to use
the pci_dev instance on restoring BARs. However, we still need
some information (e.g. PCIe capability position, header type) from
the pci_dev instance. So we have to store those information to
EEH device in advance.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  8 +++-
 arch/powerpc/kernel/eeh_pe.c                 | 25 ++++++-----
 arch/powerpc/platforms/powernv/eeh-powernv.c | 11 +++++
 arch/powerpc/platforms/pseries/eeh_pseries.c | 63 +++++++++++++++++++++++++++-
 4 files changed, 91 insertions(+), 16 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index f54a60131de..4199d994327 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -84,8 +84,11 @@ struct eeh_pe {
  * another tree except the currently existing tree of PCI
  * buses and PCI devices
  */
-#define EEH_DEV_IRQ_DISABLED	(1 << 0)	/* Interrupt disabled	*/
-#define EEH_DEV_DISCONNECTED	(1 << 1)	/* Removing from PE	*/
+#define EEH_DEV_BRIDGE		(1 << 0)	/* PCI bridge		*/
+#define EEH_DEV_ROOT_PORT	(1 << 1)	/* PCIe root port	*/
+#define EEH_DEV_DS_PORT		(1 << 2)	/* Downstream port	*/
+#define EEH_DEV_IRQ_DISABLED	(1 << 3)	/* Interrupt disabled	*/
+#define EEH_DEV_DISCONNECTED	(1 << 4)	/* Removing from PE	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -93,6 +96,7 @@ struct eeh_dev {
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
+	u8 pcie_cap;			/* Saved PCIe capability	*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 2aa955ae01a..f9450537e33 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -578,7 +578,7 @@ void eeh_pe_state_clear(struct eeh_pe *pe, int state)
  * blocked on normal path during the stage. So we need utilize
  * eeh operations, which is always permitted.
  */
-static void eeh_bridge_check_link(struct pci_dev *pdev,
+static void eeh_bridge_check_link(struct eeh_dev *edev,
 				  struct device_node *dn)
 {
 	int cap;
@@ -589,16 +589,17 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 	 * We only check root port and downstream ports of
 	 * PCIe switches
 	 */
-	if (!pci_is_pcie(pdev) ||
-	    (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT &&
-	     pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM))
+	if (!(edev->mode & (EEH_DEV_ROOT_PORT | EEH_DEV_DS_PORT)))
 		return;
 
-	pr_debug("%s: Check PCIe link for %s ...\n",
-		 __func__, pci_name(pdev));
+	pr_debug("%s: Check PCIe link for %04x:%02x:%02x.%01x ...\n",
+		 __func__, edev->phb->global_number,
+		 edev->config_addr >> 8,
+		 PCI_SLOT(edev->config_addr & 0xFF),
+		 PCI_FUNC(edev->config_addr & 0xFF));
 
 	/* Check slot status */
-	cap = pdev->pcie_cap;
+	cap = edev->pcie_cap;
 	eeh_ops->read_config(dn, cap + PCI_EXP_SLTSTA, 2, &val);
 	if (!(val & PCI_EXP_SLTSTA_PDS)) {
 		pr_debug("  No card in the slot (0x%04x) !\n", val);
@@ -652,8 +653,7 @@ static void eeh_bridge_check_link(struct pci_dev *pdev,
 #define BYTE_SWAP(OFF)	(8*((OFF)/4)+3-(OFF))
 #define SAVED_BYTE(OFF)	(((u8 *)(edev->config_space))[BYTE_SWAP(OFF)])
 
-static void eeh_restore_bridge_bars(struct pci_dev *pdev,
-				    struct eeh_dev *edev,
+static void eeh_restore_bridge_bars(struct eeh_dev *edev,
 				    struct device_node *dn)
 {
 	int i;
@@ -679,7 +679,7 @@ static void eeh_restore_bridge_bars(struct pci_dev *pdev,
 	eeh_ops->write_config(dn, PCI_COMMAND, 4, edev->config_space[1]);
 
 	/* Check the PCIe link is ready */
-	eeh_bridge_check_link(pdev, dn);
+	eeh_bridge_check_link(edev, dn);
 }
 
 static void eeh_restore_device_bars(struct eeh_dev *edev,
@@ -729,12 +729,11 @@ static void eeh_restore_device_bars(struct eeh_dev *edev,
 static void *eeh_restore_one_device_bars(void *data, void *flag)
 {
 	struct eeh_dev *edev = (struct eeh_dev *)data;
-	struct pci_dev *pdev = eeh_dev_to_pci_dev(edev);
 	struct device_node *dn = eeh_dev_to_of_node(edev);
 
 	/* Do special restore for bridges */
-	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-		eeh_restore_bridge_bars(pdev, edev, dn);
+	if (edev->mode & EEH_DEV_BRIDGE)
+		eeh_restore_bridge_bars(edev, dn);
 	else
 		eeh_restore_device_bars(edev, dn);
 
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index a380428cf9c..4361a5c7f3a 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -124,6 +124,17 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	/* Initialize eeh device */
 	edev->class_code	= dev->class;
 	edev->mode		= 0;
+	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		edev->mode |= EEH_DEV_BRIDGE;
+	if (pci_is_pcie(dev)) {
+		edev->pcie_cap = pci_pcie_cap(dev);
+
+		if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
+			edev->mode |= EEH_DEV_ROOT_PORT;
+		else if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)
+			edev->mode |= EEH_DEV_DS_PORT;
+	}
+
 	edev->config_addr	= ((dev->bus->number << 8) | dev->devfn);
 	edev->pe_config_addr	= phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff);
 
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 0f44f9fe49a..9e80f0af311 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -133,6 +133,48 @@ static int pseries_eeh_init(void)
 	return 0;
 }
 
+static int pseries_eeh_cap_start(struct device_node *dn)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	u32 status;
+
+	if (!pdn)
+		return 0;
+
+	rtas_read_config(pdn, PCI_STATUS, 2, &status);
+	if (!(status & PCI_STATUS_CAP_LIST))
+		return 0;
+
+	return PCI_CAPABILITY_LIST;
+}
+
+
+static int pseries_eeh_find_cap(struct device_node *dn, int cap)
+{
+	struct pci_dn *pdn = PCI_DN(dn);
+	int pos = pseries_eeh_cap_start(dn);
+	int cnt = 48;	/* Maximal number of capabilities */
+	u32 id;
+
+	if (!pos)
+		return 0;
+
+        while (cnt--) {
+		rtas_read_config(pdn, pos, 1, &pos);
+		if (pos < 0x40)
+			break;
+		pos &= ~3;
+		rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
+		if (id == 0xff)
+			break;
+		if (id == cap)
+			return pos;
+		pos += PCI_CAP_LIST_NEXT;
+	}
+
+	return 0;
+}
+
 /**
  * pseries_eeh_of_probe - EEH probe on the given device
  * @dn: OF node
@@ -146,8 +188,10 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 {
 	struct eeh_dev *edev;
 	struct eeh_pe pe;
+	struct pci_dn *pdn = PCI_DN(dn);
 	const u32 *class_code, *vendor_id, *device_id;
 	const u32 *regs;
+	u32 pcie_flags;
 	int enable = 0;
 	int ret;
 
@@ -167,9 +211,26 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	if (dn->type && !strcmp(dn->type, "isa"))
 		return NULL;
 
-	/* Update class code and mode of eeh device */
+	/*
+	 * Update class code and mode of eeh device. We need
+	 * correctly reflects that current device is root port
+	 * or PCIe switch downstream port.
+	 */
 	edev->class_code = *class_code;
+	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
 	edev->mode = 0;
+	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		edev->mode |= EEH_DEV_BRIDGE;
+		if (edev->pcie_cap) {
+			rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
+					 2, &pcie_flags);
+			pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
+			if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
+				edev->mode |= EEH_DEV_ROOT_PORT;
+			else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
+				edev->mode |= EEH_DEV_DS_PORT;
+		}
+	}
 
 	/* Retrieve the device address */
 	regs = of_get_property(dn, "reg", NULL);
-- 
cgit v1.2.3-70-g09d2


From 91150af3adf67463c4ca7d72d4fe1a84da37792c Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:25:00 +0800
Subject: powerpc/eeh: Fix unbalanced enable for IRQ

The patch fixes following issue:

Unbalanced enable for IRQ 23
------------[ cut here ]------------
WARNING: at kernel/irq/manage.c:437
:
NIP [c00000000016de8c] .__enable_irq+0x11c/0x140
LR [c00000000016de88] .__enable_irq+0x118/0x140
Call Trace:
[c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable)
[c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0
[c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0
[c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130
[c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170
[c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0
[c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0
[c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170
[c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100
[c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh_driver.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 9fda75d1f5a..36bed5a1275 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -143,10 +143,14 @@ static void eeh_disable_irq(struct pci_dev *dev)
 static void eeh_enable_irq(struct pci_dev *dev)
 {
 	struct eeh_dev *edev = pci_dev_to_eeh_dev(dev);
+	struct irq_desc *desc;
 
 	if ((edev->mode) & EEH_DEV_IRQ_DISABLED) {
 		edev->mode &= ~EEH_DEV_IRQ_DISABLED;
-		enable_irq(dev->irq);
+
+		desc = irq_to_desc(dev->irq);
+		if (desc && desc->depth > 0)
+			enable_irq(dev->irq);
 	}
 }
 
-- 
cgit v1.2.3-70-g09d2


From ab55d2187da27414f78056810713c92f9a4350c2 Mon Sep 17 00:00:00 2001
From: Gavin Shan <shangw@linux.vnet.ibm.com>
Date: Wed, 24 Jul 2013 10:25:01 +0800
Subject: powerpc/eeh: Introdce flag to protect sysfs

The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs
entries for the corresponding EEH device (then PCI device) has been
added or removed, in order to avoid race condition.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/eeh.h               |  2 ++
 arch/powerpc/kernel/eeh.c                    |  2 ++
 arch/powerpc/kernel/eeh_sysfs.c              | 16 +++++++++++++++-
 arch/powerpc/platforms/powernv/eeh-powernv.c |  4 ++--
 arch/powerpc/platforms/pseries/eeh_pseries.c |  2 +-
 5 files changed, 22 insertions(+), 4 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index 4199d994327..d3e5e9bc8f9 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -90,6 +90,8 @@ struct eeh_pe {
 #define EEH_DEV_IRQ_DISABLED	(1 << 3)	/* Interrupt disabled	*/
 #define EEH_DEV_DISCONNECTED	(1 << 4)	/* Removing from PE	*/
 
+#define EEH_DEV_SYSFS		(1 << 8)	/* Sysfs created        */
+
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
 	int class_code;			/* Class code of the device	*/
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index a5783f1a7a9..ea9414c8088 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -911,6 +911,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 		eeh_rmv_from_parent_pe(edev);
 		eeh_addr_cache_rmv_dev(edev->pdev);
 		eeh_sysfs_remove_device(edev->pdev);
+		edev->mode &= ~EEH_DEV_SYSFS;
 
 		edev->pdev = NULL;
 		dev->dev.archdata.edev = NULL;
@@ -1016,6 +1017,7 @@ void eeh_remove_device(struct pci_dev *dev)
 
 	eeh_addr_cache_rmv_dev(dev);
 	eeh_sysfs_remove_device(dev);
+	edev->mode &= ~EEH_DEV_SYSFS;
 }
 
 static int proc_eeh_show(struct seq_file *m, void *v)
diff --git a/arch/powerpc/kernel/eeh_sysfs.c b/arch/powerpc/kernel/eeh_sysfs.c
index 61e2a145213..5d753d4f2c7 100644
--- a/arch/powerpc/kernel/eeh_sysfs.c
+++ b/arch/powerpc/kernel/eeh_sysfs.c
@@ -56,26 +56,40 @@ EEH_SHOW_ATTR(eeh_pe_config_addr,  pe_config_addr,  "0x%x");
 
 void eeh_sysfs_add_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
 	int rc=0;
 
+	if (edev && (edev->mode & EEH_DEV_SYSFS))
+		return;
+
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_mode);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	rc += device_create_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
 
 	if (rc)
 		printk(KERN_WARNING "EEH: Unable to create sysfs entries\n");
+	else if (edev)
+		edev->mode |= EEH_DEV_SYSFS;
 }
 
 void eeh_sysfs_remove_device(struct pci_dev *pdev)
 {
+	struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev);
+
 	/*
 	 * The parent directory might have been removed. We needn't
 	 * continue for that case.
 	 */
-	if (!pdev->dev.kobj.sd)
+	if (!pdev->dev.kobj.sd) {
+		if (edev)
+			edev->mode &= ~EEH_DEV_SYSFS;
 		return;
+	}
 
 	device_remove_file(&pdev->dev, &dev_attr_eeh_mode);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_config_addr);
 	device_remove_file(&pdev->dev, &dev_attr_eeh_pe_config_addr);
+
+	if (edev)
+		edev->mode &= ~EEH_DEV_SYSFS;
 }
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 4361a5c7f3a..79663d26e6e 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -122,8 +122,8 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 		return 0;
 
 	/* Initialize eeh device */
-	edev->class_code	= dev->class;
-	edev->mode		= 0;
+	edev->class_code = dev->class;
+	edev->mode	&= 0xFFFFFF00;
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
 		edev->mode |= EEH_DEV_BRIDGE;
 	if (pci_is_pcie(dev)) {
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c
index 9e80f0af311..7fbc25b1813 100644
--- a/arch/powerpc/platforms/pseries/eeh_pseries.c
+++ b/arch/powerpc/platforms/pseries/eeh_pseries.c
@@ -218,7 +218,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 	 */
 	edev->class_code = *class_code;
 	edev->pcie_cap = pseries_eeh_find_cap(dn, PCI_CAP_ID_EXP);
-	edev->mode = 0;
+	edev->mode &= 0xFFFFFF00;
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
 		if (edev->pcie_cap) {
-- 
cgit v1.2.3-70-g09d2


From e8e813ed268d90c1377f53460527c419eb52c67a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Tue, 4 Jun 2013 14:21:17 +1000
Subject: powerpc: Rename PMU interrupts from CNT to PMI

Back in commit 89713ed "Add timer, performance monitor and machine check
counts to /proc/interrupts" we added a count of PMU interrupts to the
output of /proc/interrupts.

At the time we named them "CNT" to match x86.

However in commit 89ccf46 "Rename 'performance counter interrupt'", the
x86 guys renamed theirs from "CNT" to "PMI".

Arguably changing the name could break someone's script, but I think the
chance of that is minimal, and it's preferable to have a name that 1) is
somewhat meaningful, and 2) matches x86.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 2e51cde616d..c69440cef7a 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -362,7 +362,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs);
 	seq_printf(p, "  Spurious interrupts\n");
 
-	seq_printf(p, "%*s: ", prec, "CNT");
+	seq_printf(p, "%*s: ", prec, "PMI");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
 	seq_printf(p, "  Performance monitoring interrupts\n");
-- 
cgit v1.2.3-70-g09d2


From 144136dd7a25a0ca4d86685f872168502f91f337 Mon Sep 17 00:00:00 2001
From: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Date: Tue, 6 Aug 2013 22:25:14 -0400
Subject: powerpc/eeh: Add missing procfs entry for PowerNV

The procfs entry for global statistics has been missed on PowerNV
platform and the patch is going to add that.

Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com>
Acked-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/eeh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ea9414c8088..55593ee2d5a 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1061,7 +1061,7 @@ static const struct file_operations proc_eeh_operations = {
 
 static int __init eeh_init_proc(void)
 {
-	if (machine_is(pseries))
+	if (machine_is(pseries) || machine_is(powernv))
 		proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
 	return 0;
 }
-- 
cgit v1.2.3-70-g09d2


From 88f094120bd2f012ff494ae50a8d4e0d8af8f69e Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Fri, 9 Aug 2013 17:29:27 +1000
Subject: powerpc: Fix hypervisor facility unavaliable vector number

Currently if we take hypervisor facility unavaliable (from 0xf80/0x4f80) we
mark it as an OS facility unavaliable (0xf60) as the two share the same code
path.

The becomes a problem in facility_unavailable_exception() as we aren't able to
see the hypervisor facility unavailable exceptions.

Below fixes this by duplication the required macros.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4e00d223b2e..902ca3c6b4b 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -848,7 +848,7 @@ hv_facility_unavailable_relon_trampoline:
 	. = 0x4f80
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
-	b	facility_unavailable_relon_hv
+	b	hv_facility_unavailable_relon_hv
 
 	STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
 #ifdef CONFIG_PPC_DENORMALISATION
@@ -1175,6 +1175,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	b	.ret_from_except
 
 	STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
+	STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
 
 	.align	7
 	.globl	__end_handlers
@@ -1188,7 +1189,7 @@ __end_handlers:
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
 	STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable)
+	STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
 
 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 /*
-- 
cgit v1.2.3-70-g09d2


From 2517617e0de65f8f7cfe75cae745d06b1fa98586 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Fri, 9 Aug 2013 17:29:29 +1000
Subject: powerpc: Fix context switch DSCR on POWER8

POWER8 allows the DSCR to be accessed directly from userspace via a new SPR
number 0x3 (Rather than 0x11.  DSCR SPR number 0x11 is still used on POWER8 but
like POWER7, is only accessible in HV and OS modes).  Currently, we allow this
by setting H/FSCR DSCR bit on boot.

Unfortunately this doesn't work, as the kernel needs to see the DSCR change so
that it knows to no longer restore the system wide version of DSCR on context
switch (ie. to set thread.dscr_inherit).

This clears the H/FSCR DSCR bit initially.  If a process then accesses the DSCR
(via SPR 0x3), it'll trap into the kernel where we set thread.dscr_inherit in
facility_unavailable_exception().

We also change _switch() so that we set or clear the H/FSCR DSCR bit based on
the thread.dscr_inherit.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/entry_64.S | 27 +++++++++++++++++++-
 arch/powerpc/kernel/traps.c    | 58 +++++++++++++++++++++++++-----------------
 2 files changed, 60 insertions(+), 25 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index ab15b8d057a..4674fe647ad 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -584,9 +584,34 @@ BEGIN_FTR_SECTION
 	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
 	cmpwi	r6,0
+	li	r8, FSCR_DSCR
 	bne	1f
 	ld	r0,0(r7)
-1:	cmpd	r0,r25
+	b	3f
+1:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	or	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	or	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+	b	4f
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+3:
+  BEGIN_FTR_SECTION_NESTED(70)
+	mfspr	r6, SPRN_FSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_FSCR, r6
+    BEGIN_FTR_SECTION_NESTED(69)
+	mfspr	r6, SPRN_HFSCR
+	andc	r6, r6, r8
+	mtspr	SPRN_HFSCR, r6
+    END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+  END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+4:	cmpd	r0,r25
 	beq	2f
 	mtspr	SPRN_DSCR,r0
 2:
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index bf33c22e38a..e435bc089ea 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -44,9 +44,7 @@
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/pmc.h>
-#ifdef CONFIG_PPC32
 #include <asm/reg.h>
-#endif
 #ifdef CONFIG_PMAC_BACKLIGHT
 #include <asm/backlight.h>
 #endif
@@ -1296,43 +1294,54 @@ void vsx_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
 }
 
+#ifdef CONFIG_PPC64
 void facility_unavailable_exception(struct pt_regs *regs)
 {
 	static char *facility_strings[] = {
-		"FPU",
-		"VMX/VSX",
-		"DSCR",
-		"PMU SPRs",
-		"BHRB",
-		"TM",
-		"AT",
-		"EBB",
-		"TAR",
+		[FSCR_FP_LG] = "FPU",
+		[FSCR_VECVSX_LG] = "VMX/VSX",
+		[FSCR_DSCR_LG] = "DSCR",
+		[FSCR_PM_LG] = "PMU SPRs",
+		[FSCR_BHRB_LG] = "BHRB",
+		[FSCR_TM_LG] = "TM",
+		[FSCR_EBB_LG] = "EBB",
+		[FSCR_TAR_LG] = "TAR",
 	};
-	char *facility, *prefix;
+	char *facility = "unknown";
 	u64 value;
+	u8 status;
+	bool hv;
 
-	if (regs->trap == 0xf60) {
-		value = mfspr(SPRN_FSCR);
-		prefix = "";
-	} else {
+	hv = (regs->trap == 0xf80);
+	if (hv)
 		value = mfspr(SPRN_HFSCR);
-		prefix = "Hypervisor ";
+	else
+		value = mfspr(SPRN_FSCR);
+
+	status = value >> 56;
+	if (status == FSCR_DSCR_LG) {
+		/* User is acessing the DSCR.  Set the inherit bit and allow
+		 * the user to set it directly in future by setting via the
+		 * H/FSCR DSCR bit.
+		 */
+		current->thread.dscr_inherit = 1;
+		if (hv)
+			mtspr(SPRN_HFSCR, value | HFSCR_DSCR);
+		else
+			mtspr(SPRN_FSCR,  value | FSCR_DSCR);
+		return;
 	}
 
-	value = value >> 56;
+	if ((status < ARRAY_SIZE(facility_strings)) &&
+	    facility_strings[status])
+		facility = facility_strings[status];
 
 	/* We restore the interrupt state now */
 	if (!arch_irq_disabled_regs(regs))
 		local_irq_enable();
 
-	if (value < ARRAY_SIZE(facility_strings))
-		facility = facility_strings[value];
-	else
-		facility = "unknown";
-
 	pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
-		prefix, facility, regs->nip, regs->msr);
+	       hv ? "Hypervisor " : "", facility, regs->nip, regs->msr);
 
 	if (user_mode(regs)) {
 		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
@@ -1341,6 +1350,7 @@ void facility_unavailable_exception(struct pt_regs *regs)
 
 	die("Unexpected facility unavailable exception", regs, SIGABRT);
 }
+#endif
 
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 
-- 
cgit v1.2.3-70-g09d2


From c2d52644e2da8a07ecab5ca62dd0bc563089e8dc Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Fri, 9 Aug 2013 17:29:30 +1000
Subject: powerpc: Save the TAR register earlier

This moves us to save the Target Address Register (TAR) a earlier in
__switch_to.  It introduces a new function save_tar() to do this.

We need to save the TAR earlier as we will overwrite it in the transactional
memory reclaim/recheckpoint path.  We are going to do this in a subsequent
patch which will fix saving the TAR register when it's modified inside a
transaction.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/switch_to.h |  9 +++++++++
 arch/powerpc/kernel/entry_64.S       |  9 ---------
 arch/powerpc/kernel/process.c        | 10 ++++++++++
 3 files changed, 19 insertions(+), 9 deletions(-)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 49a13e0ef23..294c2cedcf7 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -15,6 +15,15 @@ extern struct task_struct *__switch_to(struct task_struct *,
 struct thread_struct;
 extern struct task_struct *_switch(struct thread_struct *prev,
 				   struct thread_struct *next);
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void save_tar(struct thread_struct *prev)
+{
+	if (cpu_has_feature(CPU_FTR_ARCH_207S))
+		prev->tar = mfspr(SPRN_TAR);
+}
+#else
+static inline void save_tar(struct thread_struct *prev) {}
+#endif
 
 extern void giveup_fpu(struct task_struct *);
 extern void load_up_fpu(void);
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 4674fe647ad..2bd0b885b0f 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -449,15 +449,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 
 #ifdef CONFIG_PPC_BOOK3S_64
 BEGIN_FTR_SECTION
-	/*
-	 * Back up the TAR across context switches.  Note that the TAR is not
-	 * available for use in the kernel.  (To provide this, the TAR should
-	 * be backed up/restored on exception entry/exit instead, and be in
-	 * pt_regs.  FIXME, this should be in pt_regs anyway (for debug).)
-	 */
-	mfspr	r0,SPRN_TAR
-	std	r0,THREAD_TAR(r3)
-
 	/* Event based branch registers */
 	mfspr	r0, SPRN_BESCR
 	std	r0, THREAD_BESCR(r3)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index c517dbe705f..8083be20fe5 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -600,6 +600,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	struct ppc64_tlb_batch *batch;
 #endif
 
+	/* Back up the TAR across context switches.
+	 * Note that the TAR is not available for use in the kernel.  (To
+	 * provide this, the TAR should be backed up/restored on exception
+	 * entry/exit instead, and be in pt_regs.  FIXME, this should be in
+	 * pt_regs anyway (for debug).)
+	 * Save the TAR here before we do treclaim/trecheckpoint as these
+	 * will change the TAR.
+	 */
+	save_tar(&prev->thread);
+
 	__switch_to_tm(prev);
 
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3-70-g09d2


From 28e61cc466d8daace4b0f04ba2b83e0bd68f5832 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Fri, 9 Aug 2013 17:29:31 +1000
Subject: powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs

If a transaction is rolled back, the Target Address Register (TAR), Processor
Priority Register (PPR) and Data Stream Control Register (DSCR) should be
restored to the checkpointed values before the transaction began.  Any changes
to these SPRs inside the transaction should not be visible in the abort
handler.

Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR.  If
we preempt a processes inside a transaction which has modified any of these, on
process restore, that same transaction may be aborted we but we won't see the
checkpointed versions of these SPRs.

This adds checkpointed versions of these SPRs to the thread_struct and adds the
save/restore of these three SPRs to the treclaim/trechkpt code.

Without this if any of these SPRs are modified during a transaction, users may
incorrectly see a speculated SPR value even if the transaction is aborted.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/processor.h |  4 ++++
 arch/powerpc/kernel/asm-offsets.c    |  3 +++
 arch/powerpc/kernel/tm.S             | 20 ++++++++++++++++++++
 3 files changed, 27 insertions(+)

(limited to 'arch/powerpc/kernel')

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 47a35b08b96..e378cccfca5 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -247,6 +247,10 @@ struct thread_struct {
 	unsigned long	tm_orig_msr;	/* Thread's MSR on ctx switch */
 	struct pt_regs	ckpt_regs;	/* Checkpointed registers */
 
+	unsigned long	tm_tar;
+	unsigned long	tm_ppr;
+	unsigned long	tm_dscr;
+
 	/*
 	 * Transactional FP and VSX 0-31 register set.
 	 * NOTE: the sense of these is the opposite of the integer ckpt_regs!
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index c7e8afc2ead..8207459efe5 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -138,6 +138,9 @@ int main(void)
 	DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar));
 	DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr));
 	DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar));
+	DEFINE(THREAD_TM_TAR, offsetof(struct thread_struct, tm_tar));
+	DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
+	DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
 	DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
 	DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct,
 					 transact_vr[0]));
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 51be8fb2480..0554d1f6d70 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -233,6 +233,16 @@ dont_backup_fp:
 	std	r5, _CCR(r7)
 	std	r6, _XER(r7)
 
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	mfspr	r3, SPRN_TAR
+	mfspr	r4, SPRN_PPR
+	mfspr	r5, SPRN_DSCR
+
+	std	r3, THREAD_TM_TAR(r12)
+	std	r4, THREAD_TM_PPR(r12)
+	std	r5, THREAD_TM_DSCR(r12)
+
 	/* MSR and flags:  We don't change CRs, and we don't need to alter
 	 * MSR.
 	 */
@@ -347,6 +357,16 @@ dont_restore_fp:
 	mtmsr	r6				/* FP/Vec off again! */
 
 restore_gprs:
+
+	/* ******************** TAR, PPR, DSCR ********** */
+	ld	r4, THREAD_TM_TAR(r3)
+	ld	r5, THREAD_TM_PPR(r3)
+	ld	r6, THREAD_TM_DSCR(r3)
+
+	mtspr	SPRN_TAR,	r4
+	mtspr	SPRN_PPR,	r5
+	mtspr	SPRN_DSCR,	r6
+
 	/* ******************** CR,LR,CCR,MSR ********** */
 	ld	r3, _CTR(r7)
 	ld	r4, _LINK(r7)
-- 
cgit v1.2.3-70-g09d2