From d10ac3734d07bee675384d22d06883b3c57b1524 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Wed, 30 Jun 2010 10:23:31 +0000 Subject: powerpc/fsl-booke: Fix comments in mmu code that mention BATS There are no BATS on BookE - we have the TLBCAM instead. Also correct the page size information to included extended sizes. We don't actually allow a 4G page size to be used, so comment on that as well. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/fsl_booke_mmu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index cdc7526e9c9..4b66a1ece6d 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -104,9 +104,10 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) } /* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. + * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; + * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus + * that support extended page sizes). Note that while some cpus support a + * page size of 4G, we don't allow its use here. */ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long size, unsigned long flags, unsigned int pid) -- cgit v1.2.3-70-g09d2 From a591f6b56d6fbd7d1951e352fe5b0acf6b91e497 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 18 May 2010 07:56:03 +0000 Subject: powerpc: Remove all rcu head initializations Remove all rcu head inits. We don't care about the RCU head state before passing it to call_rcu() anyway. Only leave the "on_stack" variants so debugobjects can keep track of objects on stack. Signed-off-by: Mathieu Desnoyers Signed-off-by: Paul E. McKenney Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index ebc2f38eb38..2c7e801ab20 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -92,7 +92,6 @@ static void pte_free_rcu_callback(struct rcu_head *head) static void pte_free_submit(struct pte_freelist_batch *batch) { - INIT_RCU_HEAD(&batch->rcu); call_rcu(&batch->rcu, pte_free_rcu_callback); } -- cgit v1.2.3-70-g09d2 From 41eab6f88f24124df89e38067b3766b7bef06ddb Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 16 May 2010 20:22:31 +0000 Subject: powerpc/numa: Use form 1 affinity to setup node distance Form 1 affinity allows multiple entries in ibm,associativity-reference-points which represent affinity domains in decreasing order of importance. The Linux concept of a node is always the first entry, but using the other values as an input to node_distance() allows the memory allocator to make better decisions on which node to go first when local memory has been exhausted. We keep things simple and create an array indexed by NUMA node, capped at 4 entries. Each time we lookup an associativity property we initialise the array which is overkill, but since we should only hit this path during boot it didn't seem worth adding a per node valid bit. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/topology.h | 3 + arch/powerpc/mm/numa.c | 122 ++++++++++++++++++++++++++---------- 2 files changed, 92 insertions(+), 33 deletions(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index 32adf728072..3033c1b3074 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -87,6 +87,9 @@ static inline int pcibus_to_node(struct pci_bus *bus) .balance_interval = 1, \ } +extern int __node_distance(int, int); +#define node_distance(a, b) __node_distance(a, b) + extern void __init dump_numa_cpu_topology(void); extern int sysfs_add_device_to_node(struct sys_device *dev, int nid); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 80d110635d2..f78f19e0a2a 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -42,6 +42,12 @@ EXPORT_SYMBOL(node_data); static int min_common_depth; static int n_mem_addr_cells, n_mem_size_cells; +static int form1_affinity; + +#define MAX_DISTANCE_REF_POINTS 4 +static int distance_ref_points_depth; +static const unsigned int *distance_ref_points; +static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS]; /* * Allocate node_to_cpumask_map based on number of available nodes @@ -204,6 +210,39 @@ static const u32 *of_get_usable_memory(struct device_node *memory) return prop; } +int __node_distance(int a, int b) +{ + int i; + int distance = LOCAL_DISTANCE; + + if (!form1_affinity) + return distance; + + for (i = 0; i < distance_ref_points_depth; i++) { + if (distance_lookup_table[a][i] == distance_lookup_table[b][i]) + break; + + /* Double the distance for each NUMA level */ + distance *= 2; + } + + return distance; +} + +static void initialize_distance_lookup_table(int nid, + const unsigned int *associativity) +{ + int i; + + if (!form1_affinity) + return; + + for (i = 0; i < distance_ref_points_depth; i++) { + distance_lookup_table[nid][i] = + associativity[distance_ref_points[i]]; + } +} + /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa * info is found. */ @@ -225,6 +264,10 @@ static int of_node_to_nid_single(struct device_node *device) /* POWER4 LPAR uses 0xffff as invalid node */ if (nid == 0xffff || nid >= MAX_NUMNODES) nid = -1; + + if (nid > 0 && tmp[0] >= distance_ref_points_depth) + initialize_distance_lookup_table(nid, tmp); + out: return nid; } @@ -251,26 +294,10 @@ int of_node_to_nid(struct device_node *device) } EXPORT_SYMBOL_GPL(of_node_to_nid); -/* - * In theory, the "ibm,associativity" property may contain multiple - * associativity lists because a resource may be multiply connected - * into the machine. This resource then has different associativity - * characteristics relative to its multiple connections. We ignore - * this for now. We also assume that all cpu and memory sets have - * their distances represented at a common level. This won't be - * true for hierarchical NUMA. - * - * In any case the ibm,associativity-reference-points should give - * the correct depth for a normal NUMA system. - * - * - Dave Hansen - */ static int __init find_min_common_depth(void) { - int depth, index; - const unsigned int *ref_points; + int depth; struct device_node *rtas_root; - unsigned int len; struct device_node *chosen; const char *vec5; @@ -280,18 +307,28 @@ static int __init find_min_common_depth(void) return -1; /* - * this property is 2 32-bit integers, each representing a level of - * depth in the associativity nodes. The first is for an SMP - * configuration (should be all 0's) and the second is for a normal - * NUMA configuration. + * This property is a set of 32-bit integers, each representing + * an index into the ibm,associativity nodes. + * + * With form 0 affinity the first integer is for an SMP configuration + * (should be all 0's) and the second is for a normal NUMA + * configuration. We have only one level of NUMA. + * + * With form 1 affinity the first integer is the most significant + * NUMA boundary and the following are progressively less significant + * boundaries. There can be more than one level of NUMA. */ - index = 1; - ref_points = of_get_property(rtas_root, - "ibm,associativity-reference-points", &len); + distance_ref_points = of_get_property(rtas_root, + "ibm,associativity-reference-points", + &distance_ref_points_depth); + + if (!distance_ref_points) { + dbg("NUMA: ibm,associativity-reference-points not found.\n"); + goto err; + } + + distance_ref_points_depth /= sizeof(int); - /* - * For form 1 affinity information we want the first field - */ #define VEC5_AFFINITY_BYTE 5 #define VEC5_AFFINITY 0x80 chosen = of_find_node_by_path("/chosen"); @@ -299,19 +336,38 @@ static int __init find_min_common_depth(void) vec5 = of_get_property(chosen, "ibm,architecture-vec-5", NULL); if (vec5 && (vec5[VEC5_AFFINITY_BYTE] & VEC5_AFFINITY)) { dbg("Using form 1 affinity\n"); - index = 0; + form1_affinity = 1; } } - if ((len >= 2 * sizeof(unsigned int)) && ref_points) { - depth = ref_points[index]; + if (form1_affinity) { + depth = distance_ref_points[0]; } else { - dbg("NUMA: ibm,associativity-reference-points not found.\n"); - depth = -1; + if (distance_ref_points_depth < 2) { + printk(KERN_WARNING "NUMA: " + "short ibm,associativity-reference-points\n"); + goto err; + } + + depth = distance_ref_points[1]; } - of_node_put(rtas_root); + /* + * Warn and cap if the hardware supports more than + * MAX_DISTANCE_REF_POINTS domains. + */ + if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) { + printk(KERN_WARNING "NUMA: distance array capped at " + "%d entries\n", MAX_DISTANCE_REF_POINTS); + distance_ref_points_depth = MAX_DISTANCE_REF_POINTS; + } + + of_node_put(rtas_root); return depth; + +err: + of_node_put(rtas_root); + return -1; } static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) -- cgit v1.2.3-70-g09d2 From cccd23428347251713b643d4bc5edb610308fd49 Mon Sep 17 00:00:00 2001 From: Christoph Egger Date: Thu, 10 Jun 2010 02:23:11 +0000 Subject: powerpc: Removing dead CONFIG_SMP_750 CONFIG_SMP_750 doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/tlb_hash32.c | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 8aaa8b7eb32..690566b66e8 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -89,17 +89,6 @@ void tlb_flush(struct mmu_gather *tlb) * -- Cort */ -/* - * 750 SMP is a Bad Idea because the 750 doesn't broadcast all - * the cache operations on the bus. Hence we need to use an IPI - * to get the other CPU(s) to invalidate their TLBs. - */ -#ifdef CONFIG_SMP_750 -#define FINISH_FLUSH smp_send_tlb_invalidate(0) -#else -#define FINISH_FLUSH do { } while (0) -#endif - static void flush_range(struct mm_struct *mm, unsigned long start, unsigned long end) { @@ -138,7 +127,6 @@ static void flush_range(struct mm_struct *mm, unsigned long start, void flush_tlb_kernel_range(unsigned long start, unsigned long end) { flush_range(&init_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_kernel_range); @@ -162,7 +150,6 @@ void flush_tlb_mm(struct mm_struct *mm) */ for (mp = mm->mmap; mp != NULL; mp = mp->vm_next) flush_range(mp->vm_mm, mp->vm_start, mp->vm_end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_mm); @@ -179,7 +166,6 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr) pmd = pmd_offset(pud_offset(pgd_offset(mm, vmaddr), vmaddr), vmaddr); if (!pmd_none(*pmd)) flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_page); @@ -192,6 +178,5 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { flush_range(vma->vm_mm, start, end); - FINISH_FLUSH; } EXPORT_SYMBOL(flush_tlb_range); -- cgit v1.2.3-70-g09d2 From ff82c319e6327b12cd94c5c57754abff243ab3e4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Jun 2010 10:58:58 +1000 Subject: powerpc/book3e: Fix single step when using HW page tables We patch the TLB miss exception vectors to point to alternate functions when using HW page table on BookE. However, we were patching in a new branch in the first instruction of the exception handler instead of the second one, thus overriding the nop that is in the first instruction. This cause problems when single stepping as we rely on that nop for the single step to stop properly within the exception vector range rather than on the target of the branch. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64e.S | 6 ++++++ arch/powerpc/mm/tlb_nohash.c | 13 +++++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 316465a32a9..5c43063d250 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -191,6 +191,12 @@ exc_##n##_bad_stack: \ sth r1,PACA_TRAP_SAVE(r13); /* store trap */ \ b bad_stack_book3e; /* bad stack error */ +/* WARNING: If you change the layout of this stub, make sure you chcek + * the debug exception handler which handles single stepping + * into exceptions from userspace, and the MM code in + * arch/powerpc/mm/tlb_nohash.c which patches the branch here + * and would need to be updated if that branch is moved + */ #define EXCEPTION_STUB(loc, label) \ . = interrupt_base_book3e + loc; \ nop; /* To make debug interrupts happy */ \ diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index e81d5d67f83..2ce42bf1f67 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -391,10 +391,15 @@ static void __early_init_mmu(int boot_cpu) /* Check if HW loader is supported */ if ((tlb0cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT)) { - patch_branch(ibase + (0x1c0 / 4), - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4), - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + patch_branch(ibase + (0x1c0 / 4) + 1, + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4) + 1, + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); book3e_htw_enabled = 1; } pr_info("MMU: Book3E Page Tables %s\n", -- cgit v1.2.3-70-g09d2 From f2b26c923518e03959142715a2b7615cb161cd16 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 9 Jul 2010 14:57:43 +1000 Subject: powerpc/book3e: Adjust the page sizes list based on MMU config Use the MMU config registers to scan for available direct and indirect page sizes and print out the result. Will be needed for future hugetlbfs implementation. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/mmu-book3e.h | 4 + arch/powerpc/include/asm/reg_booke.h | 1 + arch/powerpc/mm/tlb_nohash.c | 136 ++++++++++++++++++++++++++-------- 3 files changed, 109 insertions(+), 32 deletions(-) (limited to 'arch/powerpc/mm') diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h index 74695816205..87a1d787c5b 100644 --- a/arch/powerpc/include/asm/mmu-book3e.h +++ b/arch/powerpc/include/asm/mmu-book3e.h @@ -193,6 +193,10 @@ struct mmu_psize_def { unsigned int shift; /* number of bits */ unsigned int enc; /* PTE encoding */ + unsigned int ind; /* Corresponding indirect page size shift */ + unsigned int flags; +#define MMU_PAGE_SIZE_DIRECT 0x1 /* Supported as a direct size */ +#define MMU_PAGE_SIZE_INDIRECT 0x2 /* Supported as an indirect size */ }; extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 66dc6f0d3ad..667a498eaee 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -62,6 +62,7 @@ #define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ #define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ #define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ +#define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */ #define SPRN_MAS7_MAS3 0x174 /* MMU Assist Register 7 || 3 */ #define SPRN_MAS0_MAS1 0x175 /* MMU Assist Register 0 || 1 */ #define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 2ce42bf1f67..3b10f804b73 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -46,6 +46,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { [MMU_PAGE_4K] = { .shift = 12, + .ind = 20, .enc = BOOK3E_PAGESZ_4K, }, [MMU_PAGE_16K] = { @@ -54,6 +55,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_64K] = { .shift = 16, + .ind = 28, .enc = BOOK3E_PAGESZ_64K, }, [MMU_PAGE_1M] = { @@ -62,6 +64,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = { }, [MMU_PAGE_16M] = { .shift = 24, + .ind = 36, .enc = BOOK3E_PAGESZ_16M, }, [MMU_PAGE_256M] = { @@ -344,16 +347,108 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address) } } -/* - * Early initialization of the MMU TLB code - */ -static void __early_init_mmu(int boot_cpu) +static void setup_page_sizes(void) +{ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + unsigned int tlb0ps = mfspr(SPRN_TLB0PS); + unsigned int eptcfg = mfspr(SPRN_EPTCFG); + int i, psize; + + /* Look for supported direct sizes */ + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (tlb0ps & (1U << (def->shift - 10))) + def->flags |= MMU_PAGE_SIZE_DIRECT; + } + + /* Indirect page sizes supported ? */ + if ((tlb0cfg & TLBnCFG_IND) == 0) + goto no_indirect; + + /* Now, we only deal with one IND page size for each + * direct size. Hopefully all implementations today are + * unambiguous, but we might want to be careful in the + * future. + */ + for (i = 0; i < 3; i++) { + unsigned int ps, sps; + + sps = eptcfg & 0x1f; + eptcfg >>= 5; + ps = eptcfg & 0x1f; + eptcfg >>= 5; + if (!ps || !sps) + continue; + for (psize = 0; psize < MMU_PAGE_COUNT; psize++) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + + if (ps == (def->shift - 10)) + def->flags |= MMU_PAGE_SIZE_INDIRECT; + if (sps == (def->shift - 10)) + def->ind = ps + 10; + } + } + no_indirect: + + /* Cleanup array and print summary */ + pr_info("MMU: Supported page sizes\n"); + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + struct mmu_psize_def *def = &mmu_psize_defs[psize]; + const char *__page_type_names[] = { + "unsupported", + "direct", + "indirect", + "direct & indirect" + }; + if (def->flags == 0) { + def->shift = 0; + continue; + } + pr_info(" %8ld KB as %s\n", 1ul << (def->shift - 10), + __page_type_names[def->flags & 0x3]); + } +} + +static void setup_mmu_htw(void) { extern unsigned int interrupt_base_book3e; extern unsigned int exc_data_tlb_miss_htw_book3e; extern unsigned int exc_instruction_tlb_miss_htw_book3e; unsigned int *ibase = &interrupt_base_book3e; + + /* Check if HW tablewalk is present, and if yes, enable it by: + * + * - patching the TLB miss handlers to branch to the + * one dedicates to it + * + * - setting the global book3e_htw_enabled + */ + unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); + + if ((tlb0cfg & TLBnCFG_IND) && + (tlb0cfg & TLBnCFG_PT)) { + /* Our exceptions vectors start with a NOP and -then- a branch + * to deal with single stepping from userspace which stops on + * the second instruction. Thus we need to patch the second + * instruction of the exception, not the first one + */ + patch_branch(ibase + (0x1c0 / 4) + 1, + (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); + patch_branch(ibase + (0x1e0 / 4) + 1, + (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); + book3e_htw_enabled = 1; + } + pr_info("MMU: Book3E Page Tables %s\n", + book3e_htw_enabled ? "Enabled" : "Disabled"); +} + +/* + * Early initialization of the MMU TLB code + */ +static void __early_init_mmu(int boot_cpu) +{ unsigned int mas4; /* XXX This will have to be decided at runtime, but right @@ -370,40 +465,17 @@ static void __early_init_mmu(int boot_cpu) */ mmu_vmemmap_psize = MMU_PAGE_16M; - /* Check if HW tablewalk is present, and if yes, enable it by: - * - * - patching the TLB miss handlers to branch to the - * one dedicates to it - * - * - setting the global book3e_htw_enabled - * - * - Set MAS4:INDD and default page size - */ - /* XXX This code only checks for TLB 0 capabilities and doesn't * check what page size combos are supported by the HW. It * also doesn't handle the case where a separate array holds * the IND entries from the array loaded by the PT. */ if (boot_cpu) { - unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG); - - /* Check if HW loader is supported */ - if ((tlb0cfg & TLBnCFG_IND) && - (tlb0cfg & TLBnCFG_PT)) { - /* Our exceptions vectors start with a NOP and -then- a branch - * to deal with single stepping from userspace which stops on - * the second instruction. Thus we need to patch the second - * instruction of the exception, not the first one - */ - patch_branch(ibase + (0x1c0 / 4) + 1, - (unsigned long)&exc_data_tlb_miss_htw_book3e, 0); - patch_branch(ibase + (0x1e0 / 4) + 1, - (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0); - book3e_htw_enabled = 1; - } - pr_info("MMU: Book3E Page Tables %s\n", - book3e_htw_enabled ? "Enabled" : "Disabled"); + /* Look for supported page sizes */ + setup_page_sizes(); + + /* Look for HW tablewalk support */ + setup_mmu_htw(); } /* Set MAS4 based on page table setting */ -- cgit v1.2.3-70-g09d2