From ba461f094bab2dc09487816b9dfce845796b259d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Thu, 29 Jul 2010 11:16:34 +0100 Subject: powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts kw_i2c_irq and via_pmu_interrupt are not timer interrupts and therefore should not use IRQF_TIMER. Use the recently introduced IRQF_NO_SUSPEND instead since that is the actual desired behaviour. Signed-off-by: Ian Campbell Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Grant Likely Cc: linuxppc-dev@ozlabs.org Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1280398595-29708-3-git-send-email-ian.campbell@citrix.com> Signed-off-by: Thomas Gleixner --- arch/powerpc/platforms/powermac/low_i2c.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/platforms/powermac') diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index 06a137c5b8b..480567e5fa9 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -542,11 +542,12 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) /* Make sure IRQ is disabled */ kw_write_reg(reg_ier, 0); - /* Request chip interrupt. We set IRQF_TIMER because we don't + /* Request chip interrupt. We set IRQF_NO_SUSPEND because we don't * want that interrupt disabled between the 2 passes of driver * suspend or we'll have issues running the pfuncs */ - if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host)) + if (request_irq(host->irq, kw_i2c_irq, IRQF_NO_SUSPEND, + "keywest i2c", host)) host->irq = NO_IRQ; printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n", -- cgit v1.2.3-70-g09d2