From 7f21f52940212c25b4387c2450018e161043549a Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 16 Jul 2007 13:32:24 -0500 Subject: [POWERPC] cpm2: Add cpm2_set_pin(). This provides a generic way for board code to set up CPM pins, rather than directly poking magic values into registers. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2_common.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch/powerpc/sysdev') diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c index c6dc0bf614b..fc4c9956538 100644 --- a/arch/powerpc/sysdev/cpm2_common.c +++ b/arch/powerpc/sysdev/cpm2_common.c @@ -422,3 +422,36 @@ void *cpm_dpram_addr(unsigned long offset) return (void *)(im_dprambase + offset); } EXPORT_SYMBOL(cpm_dpram_addr); + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +void cpm2_set_pin(int port, int pin, int flags) +{ + struct cpm2_ioports __iomem *iop = + (struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport; + + pin = 1 << (31 - pin); + + if (flags & CPM_PIN_OUTPUT) + setbits32(&iop[port].dir, pin); + else + clrbits32(&iop[port].dir, pin); + + if (!(flags & CPM_PIN_GPIO)) + setbits32(&iop[port].par, pin); + else + clrbits32(&iop[port].par, pin); + + if (flags & CPM_PIN_SECONDARY) + setbits32(&iop[port].sor, pin); + else + clrbits32(&iop[port].sor, pin); + + if (flags & CPM_PIN_OPENDRAIN) + setbits32(&iop[port].odr, pin); + else + clrbits32(&iop[port].odr, pin); +} -- cgit v1.2.3-70-g09d2